My AE just keep blinking orange even after factory reset. Does this means the thing is pass its useful life,

My AE just keep blinking orange even after several resets. Ths thing is about 4 years old. Is it pass its usefullife?

Actually, a flashing amber (blinking orange) status light is normal for just after performing a reset. It just indicates that any of the several potential conditions may require your attention:
The base station has not yet been configured because it is new, or the reset switch has been set.
You have selected a security configuration that is not recommended.
One of several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.
(ref: http://docs.info.apple.com/article.html?artnum=305101)
If you run the AirPort Utility, it will show an amber circle on the summary page next to the area(s) causing the problem. Click on this amber circle and it should provide an explanation.

Similar Messages

MIFI4620LE Jetpack blinking amber light--does this mean the battery is bad? Should the unit operate without the battery installed if plugged in?

MIFI4620LE Jetpack blinking amber light--does this mean the battery is bad? Should the unit operate without the battery installed if plugged in?

The MIFI4620LE Jetpack does not work without a battery installed, even when connected to an external power supply.
I personally think that was a dumb design. I would think the unit would use more electricity when continually charging the battery than just powering the unit it's self, but that's the way Novatel made them.
If your Jetpack works with the battery installed and connected to an external power supply, but does not power on with power supply disconnected, I would say that the battery is defective or worn out.
You should be able to go to a nearby Verizon Store and have them either test the battery or put a new one in it to see if it works. Then you will know if you need to spend the $$ for a new battery. OR if you always use your Jetpack at home, or in your car, just use the old battery connect to a power supply or your cigarette lighter and save the cash.
As the Customer Support person stated, the slow blinking amber light is a normal state when the Jetpack is turned on and connected to Verizon's service.
I hope this solves your problem.

When I try to load free apps I keep getting error message 1004. What does this mean.

When I try to load free apps on my ipad I keep getting error message 1004. What does this mean?

I have never experienced this issue, but if you can't find anything that helps on the site that Philly suggested, I have read that this has worked for that error code.
Go to Settings>Safari>Clear History, Cookies and Data or Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Am just ****** n not happy with my iphone 5 does this happened to any one else its just lose n rattle from every where power button volume rocker its very annoying every time it vibrates or am talking to some 1 on the phone lil loude..

am just ****** n not happy with my iphone 5 does this happened to any one else its just lose n rattle from every where power button volume rocker its very annoying every time it vibrates or am talking to some 1 on the phone lil loude..

It looks this community is not active or the support team don't have time to provide their inputs for the problems posted on this community.

IPod Touch 4 has gone wonky even after factory reset!!!

I have an iPod Touch 4. It has the latest o/s (6.1.3, there isn't anything newer available). I am running the latest iTunes. I have a pc with windows 7. Everything was working great up until about a week ago. All of a sudden my ipod crashed and got stuck in a boot loop... I couldn't get it to respond any other way so I did a factory reset and restore. I had massive issues after that -- most of my apps wouldn't sync/install. Very little would work. Basically it's useless. So I did another factory reset and restore. Same problem. Must have done this a dozen times. It takes a long time to do a restore btw and it fails on top of that...
So today I finally did a factory reset and set it up like new instead of doing a restore. I installed only a few apps, not all. It appeared to work ok. I just did a sync and started to install more apps and viola -- funky iPod again... It appears to work, apps open, you can even play or use them. Then randomly it turns screen off, closing the app and appears to reboot (but it doesn't reboot every time)... Things do work on it, I get push notices ok... I had turned off the screen lock thing so I didn't think it should be turning the screen off anymore...
I might add, even during a sync it appears to be doing something -- it beeps, screen goes black, apple logo come up, it comes up again but its super fast so I am not sure if it's rebooting itself or what? The sync just sits there waiting... So it never appears to be dropping the connection...
This is driving me batty!!!!!!!!!!!
I tried doing searches online and it appears I am not alone... Is this some kind of problem with the latest version of itunes?
Is it my ipod going belly up?
I bought this used off amazon about 1 1/2 months ago... Should I contact the seller for replacement?
Suggestions?
If I took it to the apple store I am sure it's not under warranty so I don't think they would help me...
Everyone please chime in cause I would LOVE to use my ipod again! It's not much use to me in this state!!!!!!!

Well my friend, I do appreciate the help!
it looks like it may have been a bad app or multiple bad apps... or maybe even corrupted stored data...
it appears to be working ok now -- i've added about 1/2 my apps back... a lilttle at a time... doing backups before adding anything new each time... and it's ok... there were only a few games I cared about keeping the data for and I was able to pull that data out of some old backups using iBackup Robot... careful to pull ONLY the data for a handful of apps, NOT all the data for everything... I even decided to give up on 2 games and start over again cause I suspect they may have been part of the problem as they have new updates all the time and the updates are usually flawed.. so i just started over on those 2...
so the lesson Illaass to learn here is, before you jump in going on about how it's a bad logic board which it appears NOT to be -- let the discussion I was hoping to have with others and not you (no offense, others who actually have had this problem not someone parroting back what he's read) take place...
and if you see someone posting a similiar problem to mine -- suggest what I did first! cause most of us (including myself) don't have $199 sitting around doing nothing to buy a new ipod with... lol
but i do thank you for trying -- your heart was in the right place!

Cannot connect to TC, even after factory reset

I bought a 1TB TC from apple in 08/2008. I don't recall if it was a refurb or not. It worked fine for 4.5 years with more or less no problems. About a month or two ago the Wi-Fi stopped working. I could connect to the SSID, but occasionally could not get an internet connection without cycling the power of the modem and TC. Finally, the cycling trick stopped working, and while I could connect to the TC I couldn't get internet. I switched to the WiFi capabilties that my Comcast modem had (as I didn't have time to address the issue then). I've finally gotten around to trying to fix it and could not find the TC via WiFi. I attempted a hard reset, but holding the reset button (while under power) did not make the yellow light flash, even after 30 seconds. I then performed a factory reset by holding the reset button while plugging in the TC. The light flashed, indicating the factory reset occurred.
After the factory reset I still cannot:
-Find the TC via WiFi
     I attempted using both my previous SSID and searching for the default "Apple Network XXXXXX" signal. No dice.
-Find the TC via Ethernet
     I attempted to connect my MBP directly to the ethernet port (<--->) on the TC but the red light remains on the Ethernet in Network Settings (Status: Cable Unplugged. Either the cable for Ethernet is not plugged in or the device at the other end is not responding). I verified the cable works by connecting the ethernet cable to the cable modem and instantly getting the green "connected" light and an internet connection.
-Find the TC via Airport Utility
     The TC did not appear, even when plugged in directly with the ethernet cable.
I'm not sure if this is a firmware issue or what. The lights turn on the front and in the LEDs above the ethernet jacks in the back during power/start up but is otherwise unresponsive. I cannot attempt a firmware update as I cannot connect to the TC by WiFi/Ethernet, let alone through the Airport utilitiy.
I'm not sure if this is relevant or helpful but the TC is also making a ticking/hissing slightly faster than once a second as if the drive is being accessed.
Can anyone help!?! I have quite a drive to an apple store and I'm sure what they would charge to mail in and fix it would be excessive.
Many karma points await anyone that can help!!! Thanks in advance for your time!

The power supply is dead.
Solid amber could also be a dead hard disk.
Apple will not fix it and do not supply parts for anyone else to fix them.
It is really no longer economic to repair unless you can DIY. And even then if the hard disk is gone then it really is a waste.. just buy a replacement.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
I have given several methods.. some rough but very cheap to repair the TC.
Otherwise it is just time to buy a new one.. or IMHO a Gen4 is an excellent buy.. second hand or from your local apple refurbish store.

PLEASE HELP IPOD NOT WORKING EVEN AFTER FACTORY RESET!!

I am having terrible problems with my ipod mini... it was my sister's earlier and I got it because she gave up on it. I have done everything in my power.. tried the 5'R's, reinstalling itunes, and everything INCLUDING the factory reset, and the same thing is persisting... the exclamation mark with file, and it just says to visit http://www.apple/support/ipod, which i've gone to several times, read everything relavent, and still nothing helped. Please someone help, any thing could work so please, i'd really appreciate it, I look foreward to your opinion!!

iPod Folder with Exclamation Point After Disconnected From Computer
iPod Folder with Exclamation Point After Turned On
Good Thread About iPod Sad icon/Folder with Exclamation Point
I hope this helps!

Why can't I delete music from my iPhone 5c, even after factory resetting?

How can I delete music on my phone 5c?

Awful, awful awful.
Apple ... what were you thinking, and why did you mess up your product so badly?
Why are you screwing over those who are the most devoted, who paid for an extra?
Really. Could this be more frustrating:
You download a great new album!
You want to listen to it on your iPhone!
Oh wait, your iPhone is full. Over capacity. AND YOU SPEND AN HOUR TRYING TO FIGURE OUT HOW TO GET SONGS OFF YOUR IPHONE, reading every forum and every trick to somehow make the product work the way it should. Trying to clear some space for that great new album you just got!
But it still doesn't.
... frustrated, you end up deleting the whole library. Because there seems to be no other way to clear space.
And re-download.
But "use cellular data" is back on, so it downloads when you're out.
And your phone bill is now $300 because you live in Canada and the data caps are so low.
Great. Now I paid over $350 to get my music I already own onto the phone.
At this point, the old USB seems like a better option. Or even the firewire 400. Longing for the days of my 10 gig iPod with a FireWire cable.
Thanks. So much for "positive user experience".
Easy to buy music, hard to get it on to your device. But as long as I've already given you my money, who cares right?!

No sound on my dv6 even after factory reset. TRIED REINSTALLING IDT then got not supported message

windows 7 64 bit
hp DV6 QE068UA#ABA
my sound cut out the other day playing a game like it started to cut out here and there then fully cut out now not working unless i have a input jack plugged in the laptop.. speakers on my laptop that is but if i plug my stereo in it plays sound outta the laptop speakers just fine but also plays outta my stereo
i already factory reset my laptop to see if thatd work and it still didnt help
i already uninstalled the idt and i tried to install it again and its saying 'the hardware detected is not supported by this idt software package the install will be aborted'
Please Help

Thank you for visiting the HP Support Forums. I'm sorry but this is a peer-to-peer community of HP customers, and not a venue to contact HP directly. Most of the users here are consumers like yourself who are offering solutions because they like to help others, and any HP employees you see are here on their own capacity and not representing the company.
If you have additional or direct feedback for HP about their products or services, or questions about repair, you can use the link below for contact information.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
If you have other questions and concerns about using the forum, please feel free to send me a private message.
OrnahP
HP Support Forums Moderator
Clicking the "Kudos Star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking "Accept as Solution" to help other members in the future!
Rules of Participation

Freezes during "starting windows" message even after factory reset.

I've gone through diagnostic tests and they've shown it wasn't a hardware error. After a failed update to windows 10 my computer rolled back to windows 7. After the rollback when attempting to boot win 7 It froze and hung on the starting windows screen. At first i was able to boot in safe mode and navigate the desktop and drivers, but after plenty of failed fixes i had to result to a factory reset with alienrespawn. After the factory reset the issue still persists, and i can no longer boot up in safe mode. When i do, it tries to do first time installation and says that i has to reboot in normal mode to complete first time config. My computer didn't come with a disk so i can't re-install windows 7, and factory reset dosen't seem to fix the issue. All I need is to resolve this issue so i can get back with a clean slate to upgrade to windows 10. Any ideas?

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your computer freezes during the "Starting Windows" message on your desktop, and I would be happy to help! Since your Alienware X51 computer is a Dell product, I recommend contacting Dell Technical Support for further assistance in this matter. Best Regards

G5 keeps freezing. Even after we had it "repaired" at the shop.

We have a Dual 2.5 G5. It started freezing and having problems so we took it to the local Apple Authorized Repair Center. They said it was either the logic board or the processor(s). Took them a couple weeks to find a new motherboard and they installed that and said it was fixed.
I get it and take it back to the shop and plug it in. Fans are all running WAY too high (and loud). I figure, oh well, at least it works. Well, then it freezes up the next day. I reboot and it works for a few ours and then freezes. I do the same and it freezes after a couple hours. I turn it off over night and the next day, I turn it on and it runs for a little while and then freezes. I take it back to the shop. The guy says he's run all the tests on it and the software keeps coming back saying everything is fine. He has it for about a month, fails to call and let me know he's "fixed" it so I call and they said its ready to pick up.
The tech sheet said that it runs fine but the fans are running a bit loud.
I get it back and yea, the fans are still running loud but at least it works. WRONG. Couple hours go by and it freezes.
BTW. When it does freeze, then all the fans kick go up slowly to like 100%. Sounds like a jet engine in here when it does that.
So, any ideas? We paid about $500 for the new logic board and installation.

If the shop is in any way reliable, they should take it back and work on it again. They have to stand behind there work.
As far as power goes, I doubt it seriously.
Allan

Unable to connect to DNS 323 after switch to Airport Extreme even after factory reset

Hi everyone,
I have a NAS that I love and have more then my entire life on. I've had it for a long time and it's almost full. Any solution including to format the drives will be shunned.
The NAS has worked fine for a long time since I set it to a static IP. Last week I installed the Aiport Extreme and the NAS was lost. The new IP series start at 10.., and the old at 192... something.
I've searched the web for ideas and the best ones seem to be hooking up the nas to the old router and removing the ip adress. That's a mess. I tried to reset the configuration to facotry settings but that did nothing. I can't find the NAS on my PS, the DLink easy search utility comes up blank.
Any ideas?

Thank you very much for your reply, I'm sure that it would have worked but something better,more magical happened. It automatically set itself!!
Sometimes I love technology. I resetted the NAS twice. Once with the networkcable in it, and once directly after without the network cable in it. And then I called it a day. Surfed a little and pondered the mess of taking down the NAS from the high half hidden shelf and pulling out the old router, finding this above possible solution and planned to do it another day.
Today I saw that the NAS had appeard on the network! I could access the web interface and set password and static ip from the dynamic one.

Ipad screen unresponsive even after a reset and reloading of the IOS.

Anyone else had this problem after the warranty runs out? What dud Apple do to repair?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Iphone 4 sim searching after sometime even after factory reset!!

The network is available and after sometime the sim gets searching and finally appears no service.
when the phone is locked and opened the network is back for sometime and finally happens the same shitt!!!!ish
Sorry For My Bad English.

Hi there HackerKrish,
You may find the troubleshooting steps in the article below helpful.
iPhone: Troubleshooting No Service
http://support.apple.com/kb/ts4429
-Griff W.

My iPad 2 camera is not working even after factory reset, what can I do??

Ever since I've had an update for my iPad As I've had this for nearly 2 years now and I have tried everything to fix this camera, including a factory reset and nothing has worked.. Please help me!!

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

My AE just keep blinking orange even after factory reset. Does this means the thing is pass its useful life,

Similar Messages

Maybe you are looking for