My After effects wont render the whole video?

So I recently switched to After Effects CC 2014 and for some reason, When I go to render my video, the first clip is the only thing rendered. I Have the whole area selected open however.

Nobody can tell you anything without proper system info or other technical details like exact comp settings, render settings and what have you.
Mylenium

Similar Messages

After Effects wont render full res - possible RAM issue?

Not sure if this has ever come up before - I'm unable to render out of after effects and RAM preview half res. When I try and RAM preview the comp just goes black and when I send it to render I get the following message:
After Effects warning: Logged one error - "error Rendering while writing to file. An output module failed. The file may be damaged or corrupted(-1610153464)"
I'm able to RAM preview half res okay, and can render out half res as well. I've tried it with rendering multiple frames simultaneously on and off, clearing the disk cache and turning off any RAM hogging effects.
An obvious cause I've identified is that I've recently upgraded and replaced the RAM on my machine, however, after effects has been the only software effected. Cinema 4D renders no problems and I've had no other problems with the general running of my machine.
Have there ever been any cases before of After Effects not working with certain types of RAM?
My set up -
Mac Pro - Early 2008
OSX Mavericks 20.9.2
2 x 2.8 Ghz Quad-Core Intel Xeon
16GB 800MHz DDR2 FB-DIMM
250GB Samsung SSD

I'm running After Effects CC 12.2.1.5
Sorry should have mentioned, no matter what format I render as, whether it be QT or TIFF sequence, I still get the exact same error.
QT version i'm using is 7.6.6
In terms of reproducing the error, it seems to happen to pretty much anything I try and render, unless it's an extremely simple one layer comp. Rendering a comp with 2 image sequence layers (1920 x 1080) will cause this to happen, but if there's just the one image sequence alone in the comp (and no other layers) then it will render.

Timeline does not render the whole video.

Hi,
my problem is when i want to pre-render a video in my timeline this green line only draws until 10 sec but i want to see the whole video without this lagging. Can someone help me please?
Thanks for an answer.

FAQ: Why does RAM preview only play part of my composition?

What are the best setting to export video from after effects to get the best video quality ?

Hi
I am editing a raw time lapse in after effects and also some short video clips I would like to export them from after effects and upload them online afterwards but i get a bit lost in exporting settings and formats and mbps..
What are the best settings to export a video and get best quality(high) in full hd 1080 ? in 4k ? and what would be the best setting to export animations/logo/intro and get best quality ?
Thank you very much.

Thanks for reply !
I used until now quicktime in H264 codec was that OK ?
two more questions :
what are the export settings for 4k files for web/you tube ?
to play on my PC using windows media player or Quicktime player and getting the best quality ?
Thanks in advance.

After Effects wont render video completely

Usually I am pretty good at solving problems, but for this issue, it seems that I cannot figure out why I can't fully render a composition. I've used After Effects for over 3 years and I've done tons of video work for clients.
The issue lies when I send my entire composition to the render queue. My export range is for the entire composition. But when I press render, it only renders 21 seconds and then stops completing the action of rendering.
I'm in Adobe CC 2014, if that makes enough of a difference to fixing my problem.
Can I get some help?

I just recently installed the newest version of After Effects and did a system reboot. I make it past 0:21:09, but the render stops at random points. The farthest it makes is to 0:52:03. It is a three minute long video. I get an status saying "Failed at (Timecode)".
This is the latest version of Adobe. I am operating under 10.8.5.
I don't understand why I am having these issues.
For it will stop at times before then, but, I honestly dont know the issue.

After Effects wont open error message

Hello.
My After effects wont open. I've read many forums and info that others have written about it not opening. Stuff about erasing fonts, deactivating fonts, then also, finding folders /Library/Application Support/Adobe/Common/Plug-ins/CS4/MediaCore---> which was empty and had nothing to erase or do anything with http://forums.creativecow.net/thread/2/973961 ...Still nothing.
this is the error.
Last log message was: <140735190438672> <EAMountPoints> <0> Error: mount point list is empty
My computer is a brand new mac book pro. Tip Top of the line. Not sure what other details i should give.
Thanks for any help you can offer.
UGH boooo
thanks
L

I saw that there were a series of questions i need to answer in order to get the right answers.
What exact version of After Effects? Include the minor version number (e.g., After Effects CS5.5 with the 10.5.1 update). Do not just say "After Effects with the latest updates"; give the specific version number.
12.2 - after effects CC - CS6
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
yes. i even uninstalled and reinstalled the newest...again.
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
Mac OSX 10.9.1
Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number of disk drives, and how any external drives are connected.
2.3 GHZ Intel Core i716GB 1600 MHZ DDR3Macintosh HDprocessor #: 1Zero external drives connected.I use my local connection with my desktop to share files. Model Name: MacBook Pro Model Identifier: MacBookPro11,3 Processor Name: Intel Core i7 Processor Speed: 2.3 GHz Number of Processors: 1 Total Number of Cores: 4 L2 Cache (per Core): 256 KB L3 Cache: 6 MB Memory: 16 GB
What versions of drivers for your graphics hardware do you have installed (including CUDA driver and driver for display adapter)?
Graphics NVIDIA GeForce GT 750M 2048 MBInstalled CUDA
Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)?
NO
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
If you are getting error message(s), what is the full text of the error message(s)?
Last log message was: <140735190438672> <EAMountPoints> <0> Error: mount point list is empty.Generating crash log, which may take a few minutes. although there is another window that says A LOT MORE!!
What were you doing when the problem occurred?
trying to open it.
Has this ever worked before? If this worked before by doesn't work now, what has changed on your computer in the intervening time?
It has worked for about 4 or 5 days. It was even working when i was doing the same action prior to the last time it stopped working. I was uploading a file from my other computers file. Which i had done many times throughout the day. As i work on one computer and when i have to leave and bring my laptop with me i do so. Because i work on my computer all day long. Desktop or laptop.
Do you have QuickTime installed. (You should.) If so, what version? The answer should be specific, such as "QuickTime 7.6.2".
10.3
What other software are you running?
iWork - Numbers
Do you have any third-party effects or codecs installed?
Yes. I've since deleted them but i'm not sure where else to find the files if they're still around. ?
Are you using OpenGL features in After Effects?
Not sure i know what that is?
Does the problem only happen with your final output, RAM preview, or both?
its just not opening
Are you using Render Multiple Frames Simultaneously multiprocessing?
if that is the Double line play button then yes.
Are you using the ray-traced 3D renderer?
Not sure what that is.
If the problem is with output, give your exact output settings (both render setting and output module settings). Screenshots help.
What is the exact sequence of steps that you are taking?
Thanks for any help you can give me:)
L

1- How do I animate a layer? and how do I add the clips that I've edited into the whole video?

I'm super new to this. All I need are some simple instructions to these questions: 1- How do I animate a layer? and how do I add the clips that I've edited into the whole video? I know there's probably something on Adobe's website telling me these things, but I prefer this kind of thing.

Rick has pointed you to a good set of resources. (I may be biased, since I created those resources.)
Here is a larger set of resources for learning After Effects:
http://adobe.ly/AE_basics

After Effects Minimized Render Crash?

I am experiencing a very annoying issue pertaining to After Effects CS 5.5. I recently purchased the product (Production Premium CS5) and installed it on PC only to encounter a strange error. Whenever I do a preview render (pressing 0) and then minimize I then see the number of frames being rendered in the minimized window (this is normal). However, upon clicking the minimized window to reopen it After Effects crashes immediately with the error: After Effects error: "Crash in Progress.Lastlogged message was : <4924><ImporterMPEG><1>Error_printf:No Video Available". After effects gives me the option to save my work and notifies me to contact the Adobe Technical Support Center. I recently purchased this product I am disappointed that I cannot minimize the program while rendering, the program did not do this immediately, it started doing this a couple of days after I started using it.
I have already tried uninstalling after effects and reinstalling and i get the same error everytime.
My PC Specs:
8GB RAM
AMD 1100T Sixcore 3.3 Ghz processor
GTX 275 graphics card performance edition
Is there something I'm missing? Please Help me resolve this issue, After Effects is a good product.

It usually crashes with this log message:
"Crash in Progress.Lastlogged message was : <4924><ImporterMPEG><1>Error_printf:No Video Available"
I never changed anything with my system when this error occurred nor did I install a new driver, I didn't even install a new program or do any system changes.
I have OpenGL disabled but I get this crash with it on or off. I have even tried rendering a project where all I had was a square with keyframed position but I still get the same rendering crash/error when I minimize the window, therefore I don't think its an effect causing it or OpenGL.
Any Ideas?

While rendering a project in After Effects CC (Mac) , the application closes half way, saying it quit unexpectedly, Please Help!

So, I have created a cool project that was a lot of hard work in After Effects CC (Mac), While rendering a project in After Effects CC (Mac) , the application closes half way, saying it quit unexpectedly. Here is the link to an error log which is automatically recorded when After Effects crashes:- After Effects Crash (Mac) - Pastebin.com
I have tried to render this project at least 5 times, shutting and restarting my computer. Please Help!
Here is my computer specs if needed;
Operating System: Mac OS X Mavericks version 10.9.4 (13E28)
Processor: 2.5GHz Intel Core i5
Memory: 4GB 1600 MHz DDR3
Graphics: Intel HD Graphics 4000
Screen Resolution: 13-inch (1280 x 800)
Hard Drive: 500GB -- 186.49 GB free space.
Thanks
Milan

Element 3d renders using your graphics card. Unlike After Effects, what GPU you're using matters a lot for Element.
As it is, you don't really have one.
You could try rendering an image sequence and then picking up your render where it left off when it crashes, but if a certain frame is just too much for your computer to handle, there's not much we can help with. I'd suggest adding a GPU that Element can use.

How much does Premiere Pro and After Effects rely on the hard drive it's installed on?

This may be a really dumb question, but how much does Premiere Pro and After Effects rely on the hard drive it's installed on if all your video files, assets, disk cache, etc are on different drives than the one the program itself is installed on?
The reason I am asking is that I currently have a "relatively" slow Sata II SSD for my C drive that has just my OS (windows 7 64bit) and programs (adobe editing programs, no games) installed on it and nothing else. All of the files used in my projects are saved on either a very fast Sata III SSD or a slower HDD depending on what the files are. For example, disk cache on the Sata III, stills on the HDD.
Being cyber monday I have the opportunity to buy another very fast Sata III SSD to replace my current Sata II SSD C Drive (just OS and programs). Both synthetic and real world benchmarks show a near double in performance. I just want to know if anyone thinks the upgrade is even worth it because for all I know there won't be any increase in performance since no videos, still, cach, etc will be stored on the C Drive.
The alternative is to get a second monitor because I currently only use one 21" monitor.
I suppose another alternative would be to not buy anything on the cyber monday deals and just save money for something else.
Any advice or input would be greatly appreciated. Thanks!

Thanks Alex! I think you are right about not being able to notice the difference between the SSDs. I ended up finding a deal to get about $80 off a great monitor that I've been looking at for a while and decided to pull the trigger on it. I thought about it and realized that there have already been a bunch of times where I want to watch a tutorial on youtube and follow allong in AE or PrePro, but have to keep switching windows. I also frequently want to have my video preview on a separate monitor so I can have a taller timeline window. This monitor will help a lot with that. Thanks again for your help!

Why isn't Adobe After Effects not on the Adobe Creative Cloud?

I want to Download After Effects so I could edit videos, It said to Download Creative Cloud so that's what I did and now After Effects isn't on the Application Selection. What do I do?

Sei doch nicht immer so streng! Komm geben wir ihm doch noch den Link: Systemanforderungen | After Effects

After effects wont install

I have a dell inspiron and after effects wont install. I had downloaded it before and it worked perfectly. But one day my computer had to reset itself causing me to re-download all my software. Everything downloaded perfectly except for my adobe softwares. Please help.

Sign out of your account... Uninstall... run the Cleaner...
-Restart your computer... Sign in to your account... Reinstall
-using the cleaner after uninstalling and before reinstalling is needed
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

Imovie will not import the whole video, only a portion. How can I import the entire video?

I am new Imovie user and I am having some difficulty importing video from my desktop. The whole video is on my desktop, but when I try to import it in imovie, only a few minutes of the video imports. How can I fix this issue?

Hi
A. How much free space is there on Your - Start-Up (Macintosh HD) Hard disk ?
The movie in Your Camera / Stored on Your Mac (from Camera) - is very Compressed.
For iMovie (or FinalCut) it has to be in an Editable format - and this is massively LARGER
I've movies on 500Mb when un-folder are 50Gb or even more.
B. Is there other external Hard Disks connected ?
How are it / they formatted - HAS TO BE - Mac OS Extended (hfs) to work for VIDEO
UNIX / DOS / FAT32 / Mac OS Exchange - Works for most other things but not for VIDEO
Yours Bengt W

I shot a video using my iPad 2, and it is too far away from the subject. How do I zoom in and save the whole video like that? Thanks!

I shot a video using my iPad 2, and it is too far away from the subject. How do I zoom in and save the whole video like that? Thanks!

Sorry to be such a moron with this, but I just don't have much experience with this iPad. I have had it for over a year and I just keep adding stuff to it and it has worked great. Now that the memory is used up, I am trying to figure out how to free up space and not lose what I have paid for.
So, Step 1 is complete, as I have "Transferred" all of the purchases.
What is Step 2? I unchecked the concert on the iTunes library, did a sync, but it's still on my iPad.
Thanks again for the help!!!

Is there a update for adobe after effects compatible with the mac os x 10.9.5 ?

is there a update for adobe after effects compatible with the mac os x 10.9.5 ?

If you are using After Effects CS6 (11) or After Effects CC (12), then install the updates:
http://adobe.ly/AE_CC_1201_Mavericks

My After effects wont render the whole video?

Similar Messages

Maybe you are looking for