My air book is full and won't start.. i was trying to put files over in my airport, but it didn't decrease the amount on my flash!

Help, my air book just died... it was full and I was trying to empty it on my apple router/storage but even though the files were erased from my air book I maxed it out and now it can't even start... i am in bad shape!!!!!

Hi johnsherrard,
If your iPhone is currently disabled due to a password issue, you may find the following article helpful:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
- Brenden

Similar Messages

  • Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout).

    Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.

    Hi,
    You didnt mention which version of IWS. follow these steps.
    (1)Goto Web Server Administration Server, select the server you want to manage.
    (2)Select Preference >> Perfomance Tuning.
    (3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
    (4) Apply changes and restart the server.
    *Setting the timeout to a lower value, however, may    prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before   the connection is closed is 432000 bits (2400 multiplied by 180)
    Regards
    T.Raghulan
    [email protected]

  • I have a wd my passport which for the last year i was using with my windows pc...but recently i bought a macbook and was trying too put files on it but it wouldnt work....please help!!!

    i have a wd my passport which for the last year i was using with my windows pc...but recently i bought a macbook and was trying too put files on it but it wouldnt work....please help!!!

    Hi
    You need to find the format of the drive by looking at its info, my guess would be you are currently in NTFS (windows only) mac can use any mac os journaled or non journaled, or you can use fat32 which is usable on both pc and mac but is unable to move files over 4GB so no good for large file transfers. You will need to re format at some point but this will delete everything currently on the drive.
    Hope this helps

  • My MacBook Air Just Shut down and won't start!

    Hi Friends, my apple mac book air just shut down while I was working on it. The charger was plugged in. It is a 2009 model. I did the SMC Reset and PRAM Reset. When I press the power button it gives out a beep sound. It did start for a few minutes after the SMC Reset  and it also booted for a few seconds after PRAM Reset. but it again down down. I bought this laptop from a neighbour last year who has left the country where I am, thus, he is not in touch anymore. Please Help me in fixing it. Any help is appreciated. Thanks!

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
    If this does not work, see if you can connect in recovery mode, explained in this aricle:
    If you can't update or restore your iOS device
    If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
    Find an Apple Authorized Service Provider
    iPhone - Contact Support - Apple Support

  • I am having trouble when I try opening firefox - it only "flickers" on screen and won't stay open - keeps trying to "re-open" over and over!

    When I try to open Firefox I get a small screen saying it is "checking compatibility of add-ons" (or something like that) which alternates with a quickly flashing window of Firefox. Neither one really stays open long enough to get a look at what is being displayed.
    I had an earlier version installed which I thought might have been the problem. I uninstalled that version and today installed the updated version - still having the same problem! Any ideas?

    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
    #Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
    '''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
    After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
    * '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
    * '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
    #Go to the Windows Start menu and click on "Computer".
    #In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
    #Find the "Program Files (x86)" folder or "Program Files" folder.
    #* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
    #* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
    #Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
    Now, go ahead and reinstall Firefox:
    #Double-click the downloaded installation file and go through the steps of the installation wizard.
    #Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!

  • My mac book startup disk is full and when I start it, it give me a blank blue screen. I have tried the shift and I started in safe mode, and it gave me the stars screen. How can I delete files to fix the problem

    My mac book startup disk is full and when I start it, it give me a blank blue screen. I have tried the shift upon start
    and I started in safe mode, and it gave me the stars screen. How can I delete files to fix the problem

    1. Start up in Safe Mode.
        http://support.apple.com/kb/PH11212
    2. Empty Trash.
        http://support.apple.com/kb/PH10677
    3. Delete "Recovered Messages", if any.
        Hold the option key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Mail > V2 > Mailboxes
        Delete "Recovered Messages", if any.
        Empty Trash. Restart.
    4. Delete old iOS Devices Backup.
        iTunes > Preferences > Devices
        Highlight the old Backups , press “Delete Backup” and then “OK”.
        http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
    5. Re-index Macintosh HD
       System Preferences > Spotlight > Privacy
       http://support.apple.com/kb/ht2409

  • My macbook air got wet and won't start up.  Is it toast?

    my macbook air got wet and won't start up.  Is it toast?

    most likely. take it to an Apple store or AASP for a correct diagnosis. Expect a large extimate.

  • IPad is full but says it needs charging and won't start

    After charging my iPad all night long from a wall plug in sleep mode, it says it needs charging when I unplug it and won't start. Even holding the two buttons doesn't do anything. I know it's charged because after leaving it unplugged for some time (can take from a quarter of an hour to a whole day) if i reset it, it miraculously decides to work, and when it does, the battery level is at 100%. This is a real pain.
    Anyone else has had the same issue? Any idea how to fix it?

    Work through the tips in http://support.apple.com/kb/YS3281 and see if that helps.  If not, a visit to an Apple store genius bar for testing by the techs would be in order.

  • My MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further. What to do?

    my MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further.
    What to do?
    Does that mean that the is the end of my Mac Book 5bought in the summer of 2009) ? Or is there someting to do to fix it?
    Thanks
    V

    Try this:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • I tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on

    i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on

    Did you try to connect in recovery mode to your computer, explained in this article?
    iOS: Unable to update or restore

  • I signed into my Apple ID on a new phone and I already had it on my iPod. When I signed into the new phone it won't let me buy anything unless I know my old security questions but I don't know the answers to them. How can I get past those or change them?

    I signed into my Apple ID on a new phone and I already had it on my iPod. When I signed into the new phone it won't let me buy anything unless I know my old security questions but I don't know the answers to them. How can I get past those or change them?

    See Kappy's great User Tips.
    See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities https://discussions.apple.com/docs/DOC-4551
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
    Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
     Cheers, Tom

  • HT1689 I subscribe to my video podcasts but some of them either has a small red E next to them and won't download new content or some just doesn't download new content. I have been watching the Rachael Maddow video podcast for at least a month with no pro

    I subscribe to my video podcasts but some of them either has a small red E next to them and won't download new content or some just doesn't download new content. I have been watching the Rachael Maddow video podcast for at least a month with no problems. Now suddenly it won't download the last nights show. I have read and followed all troubleshoot and cannot find a solution. I have unsubscribed and re-subscribed to no avail. Can someone help me with this problem?

    keian27 wrote:
    And now that my contract has expired, I have some options.  Last weekend, I called Verizon again threatening to leave.  The representative offered the same $75 rebate that was offered to me 6 months earlier.  I even offered up one of my device upgrades in place of a network extender, but that deal was knocked down.  And so now I’m left with the option to make a public spectacle out of this scenario and hope Verizon takes notice.  Failing that, I’ll be forced to leave Verizon behind.
    I don't understand. If having service in your home IS important to you and you already know Verizon's policy, why have you not instead started to search for carriers which cover your home? It seems a pretty easy decision to me, at least.

  • I just bought a new mac book pro 13'' and i bought a toshiba 1tb hard drive aswell, i formatted it to mac but it will not show up on my tv so i can watch movies? and solutions or reasons why?

    i just bought a new mac book pro 13'' and i bought a toshiba 1tb hard drive aswell, i formatted it to mac but it will not show up on my tv so i can watch movies? and solutions or reasons why?

    TVs don't support "Mac OS Extended (Journaled)", so you will probably have to use FAT32. To format the external drive, follow the same steps as you did to format it with "Mac OS Extended (Journaled), but in the erasing screen, select "MS-DOS (FAT)" as "Format". Note that FAT32 isn't compatible with files bigger than 4 GB. Also, you may have to format the external drive in a PC

  • I've ordered a new mac book pro 15" and i need to clean hard drive off my old PC...not really to move them to the mac, but just to save in case needed; mostly pics and office docs....any suggestions?

    I've ordered a new mac book pro 15" and i need to clean hard drive off my old PC...not really to move them to the mac, but just to save in case needed; mostly pics and office docs....any suggestions?

    Buy an external USB hard drive and copy your data to it.  Either that or burn them all to single or double layer DVDs (depending on amount of data you have).  Or if it's really a small amount, consider putting it all on a USB memory stick.

  • XI Pro stopped working and won't start

    I used XI Pro on my desktop for a year.  It worked perfect.  Now, when I click on the icon it looks like it's loading but nothing happens.

    Bill,
    The suggestion did not work.  I posted a response on the blog.
    Thanks for you assistance.
    In His Service,
    Gerry Washington
    Stewardship Technology, Inc.
    P.O. Box 987
    Mt Vernon OH 43050
    Toll-Free (866) 604-8880 Ext. 706
    www.egsnetwork.com
    www.stewardshippayroll.com
    "Bill@VT" <[email protected]> said:
    XI Pro stopped working and won't start created by ( https://forums.adobe.com/people/Bill%40VT ) in Acrobat Installation & Update Issues - ( https://forums.adobe.com/message/7258179#7258179 )
    On Windows (I just don't know how on a MAC), go to Control Panel>Programs & Features. Select Acrobat and run a repair. After the repair, open Acrobat and run Help>updates to be sure you are current.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7258179#7258179 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7258179#7258179
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Acrobat Installation & Update Issues by ( mailto:discussions-community-acrobat-installation_and_update_installatio[email protected] ware.com ) or at ( https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14 )
    For more information about maintaining your forum email notifications please go to ( https://forums.adobe.com/thread/1516624 ).

Maybe you are looking for

  • Differentiating SOs to STOs

    Dear Readers, How can one differentiate a sale order from a stock transfer order during batch determination, specifically routine RV01F901? The closest I've got to is noticing the VBTYP (SD document category). For a SO it is C. For a STO it is howeve

  • Update PO with Confirmation Control Key,Acknowledged Delivery Date.

    Hi Experts, I have a requirement that through a Excel file I have to update a Existing PO with the three fields, 1.Confirmation Control Key 2.Acknowledged Delivery Date. 3.Acknowledged Modified Delivery Date. If there will be differ in values in any

  • MessageSplit with XSLT and without BPM

    Dear all, I'm on PI 7.0 SP 16 and I've the following scenario: JDBC-Sender-Adapter delivers a resultset of multiple rows, for example <?xml version="1.0" encoding="utf-8"?> <resultset>      <row>           <PIDENT>T400000TEST6A1MA</PIDENT>           

  • Pdf files open

    unable to open pdf files ms word is trying to open my pdf file

  • Problem with scrollable result set

    hi can u please tell me how i can get no of rows from a result set.. i am using thin drivers and connecting to remote database,every thing is working fine if i use fwd only type ,but if u use sensitive type it is giving error code: stmt=con.createSta