My Air port is not working the wifi - just an amber light blinking. What's going on ?

My air port is not working the wifi - just an amber light blinking. What's going on ?

Sorry it is just not enough info to be able to figure it out.
Do a full factory reset and start over.. that is the best way out of the hole.
Using ethernet is far far superior to using wireless at least for setup.
Using iOS device with airport utility is better than using wireless via a Mac with airport utility if you have MBA or MBPr.. but it is still better to buy a usb or thunderbolt to ethernet dongle so you have actual real connection and not a vapourous one.

Similar Messages

I have changed to AT&T U-verse, which has a new modem and router combined. Safari 5.1.10 will not recognize the wifi signal, but Foxfire will. What settings do I need to change on Safari?

I have changed to AT&T U-verse, which has a new modem and router combined. Safari 5.1.10 will not recognize the wifi signal, but Foxfire will. What settings do I need to change on Safari?

Hello SalsburgD
The first thing I would check is to make sure that the router is using the recommended settings to get online. Another troubleshooting step is to create a new Network Location and then join your network to see if that changes things.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Using network locations (Mac OS X v10.6 and later)
http://support.apple.com/kb/ht5289
Regards,
-Norm G.

My ringtone will not work, the phone just vibrates when receiving calls.

I just got a new Iphone5s today and my ringtone will not work. The phone just vibrates when receiving calls. How can I get my ringtone to work?

In addition, the most basic troubleshooting is to restart/reset/restore.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414

TA38607 My iphone4s does not have the call waiting option in settings. What's going on.

My call waiting feature was working then suddenly disappeared. In settings>phone there is not listing to set the call waiting feature. This is an iPhone 4s on Sprint network. Anyone know what is going on here?

Give Sprint a call and see what they say, it is a carrier feature.

Air port extreme not working with 10.5

ok so hear is one of the many problems i am having my airport extreme is working and functions fine i can screen share and see all 3 of my macs. now to the problem when i use the network diagnostics it get all green lights up till internet and server? hmmm sounds like a provider porblem huh wrong i had a tech at my haouse for 4 hours trying to get it to work my internet works ok but super slow when plugged in i mean it is slower than dial up my iphone get faster speeds lol i have had no problems with my network before my leopard install now all 3 of my macs cant get online my airport cards work fine because i get the starbucks network fine....................

Well, my AE seems to be working fine.
I get 13.1 Mbps down and 951kbps up which is a little slower than I usually get on the downstream side (but I am cloning my drive and timemachine is running for the first time too).
You might want to check out IPNetTunerX.... it has some good tools to see where the bottlenecks might be.

3D in photoshop cc does not work, the program will be cut off automatically

3D in photoshop cc does not work, the program will be cut off automatically.What can I do?

my problem is as follows.If I want to make a 3d creation in photoshop, then
asked me to cc in clicking function 3D, after new JUST by layer and then
JUST PRESET and then sphere. Then opens a new window where in it says: you
are about to make a 3d layer.Do you want to switch on the 3d workspace? I
choose YES Then I get to see a new window stating that the program no
longer work properly and quits. Am I doing something wrong or is my pc not
suitable? data from my laptop are: processor a4-5000 AMD APU with radion
(tm) HD graphics 64-bit operating system, hr 4.00 1.50 Gb x64processor
honor!
mijn probleem is als volgt.Als ik een 3d creatie wil maken in photoshop cc,
dan wordt mij gevraagt om in functie 3D aan te klikken, daarna NIEUW NET
VAN LAAG en dan VOORINSTELLING VOOR NET en dan BOL.
Dan opend zich een nieuw venster waar in staat:u staat op het punt een 3d
laag te maken.Wilt u overschakelen op de 3d werkruimte?
Ik kies dan voor JA
Vervolgens krijg ik een nieuw venster te zien waarin staat dat het
programma niet goed meer werkt en wordt afgesloten.
Doe ik iets verkeerd of is mijn pc niet geschikt?
gegevens van mijn laptop zijn :
processor AMD a4-5000 APU with radion(tm) HD graphics 1.50 hr
4.00 Gb
64 bits besturingsysteem, x64processor
2014-12-18 10:14 GMT+01:00 c.pfaffenbichler <[email protected]>:
3D in photoshop cc does not work, the program will be cut off
automatically created by c.pfaffenbichler
<https://forums.adobe.com/people/c.pfaffenbichler> in *Photoshop General
Discussion* - View the full discussion
<https://forums.adobe.com/message/7025920#7025920>

I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution?

I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution? someone can help?

Invoke your warranty and take it back.

I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

After installation, the mobo LAN port is not working? urgent, help ple

I just installed archlinux on my new i7 860 Asus p7p55d-e Deluxe build, but after the installation the LAN port is not working anymore. Before this, this Lan port works perfect in windows as well as in the arch installation. But after the installation, the led is orange and is blinking slowly, windows complains that the cable is not properly plugged, and even arch installation can't pull DHCP from it also.
Luckily, the mobo has another lan port, so I have to plug the cable out and to the second port, but I couldn't seem to be able to find anyway to enable the first Lan port anymore?
Have you seen anything like this, what possibly is the reason?
Thanks, any help will be appreciated.

heleos, thanks for the reply, the first thing I check is BIOS. There is definitely nothing wrong with that, since I loaded the default one.
It is really strange, it seems no matter what I do, the 1st port which used to work, simple doesn't work, but the second one works fine.
But after some poking around with the "ethtool", it starts to work again. I have no idea what cause the disfunction and what magically heal it again.
Now I am really curious.
Last edited by mark.altern (2010-04-18 09:52:09)

So my iTunes Radio is not working and whenever I press or choose a station, it goes into the song it was going to play and goes back out to the stations menu. I have great wifi, great cellular option or whatever it it, So how do I get it to work again?

So my iTunes Radio is not working and whenever I press or choose a station, it goes into the song it was going to play and goes back out to the stations menu. I have great wifi, great cellular option or whatever it it, So how do I get it to work again?

Hi Jbierrie,
There is an issue with Photoshop specifically related to recent updates in which causes the licensing to revert to trial after a certain number of launches (typically 2-3).
The current workarounds are to either:
- Sign in with your Adobe ID again every few launches
- Uninstall Photoshop CS6 and then reinstall it but don't install any of the updates
The issue with the updates is planned to be fixed in the coming weeks. Sorry for the inconvenience.
-Dave

On MacBook Air not work the Internet from iPad Wi-Fi mode, but work from iPad USB internet mode. Please help me) Thank)

On MacBook Air not work the Internet from iPad Wi-Fi mode, but work from iPad USB internet mode. Please help me. Thank)))

The following link has a Wi-Fi troubleshooting section for personal hotspot that may help: iOS: Troubleshooting Personal Hotspot

I bought a new Epson printer WR-7620 on Saturday and the Air Printer is not working. I spoke to Epson and they said it is an Apple problem, can anyone help. Thanks Peter

I bought a new Epson printer WR-7620 on Saturday and the Air Printer is not working. I spoke to Epson and they said it is an Apple problem, can anyone help. Thanks Peter

Peter,
deggie gave you that link so you'd know that airprint is a reduced-options print system, designed for mobile devices (not Macs), and you need to use the specific airprint driver on the Mac when adding the printer if you want Airprint, no-options printing. Otherwise, select the "non-airprint" driver when you add the printer.
It may be helpful to Reset the Printing System to get OS X to find the right driver.
Mac OS X: How to reset the printing system - Apple Support
(And "not working" doesn't help us to help you - please give more detail next time)

Have just downloaded iTunes 10.5.2.(11) onto Mac Book Pro and now the earphones port does not work. Any suggestions? Annie H

Have just down loaded iTUnes 10.5.2.(11) onto MacBook Pro and now the earphone port is not working. Any suggestions. Annie H

My System Preferences>Soundoutput screen does not have the "Use audio port for" field.
Does your MBP have two separate audio ports - one for line-in and one output port? Then you wan't see that selector.
but the port has started to work again....Reason???
Perhaps there was dirt or something in the jack and the contact was bad.
(or you accidentally put the plug into the line-in jack instead into the audio-out; that happened to me once ).
Regards
Léonie

HT204150 Following problem: I have around 600 contacts on my iphone and Ipad and would like to sync with contact list on my mac book air but its not working and whatever I do I get stuck on the 44 contacts I have on my mac contact-list. Please Help!!!!

ollowing problem: I have around 600 contacts on my iphone and Ipad and would like to sync with contact list on my mac book air but its not working and whatever I do I get stuck on the 44 contacts I have on my mac contact-list. Please Help!!!! thanks

First, be sure that the contacts on the devices are in the "icloud" section and not the "On my iPhone" (or iPad) section of the contact listings/groups.
Missing contacts:
Here's a test to perform - using a computer's browser, log into icloud.com and go to the Contacts page. If most of them are gone, then they are gone.
If they show up, then the problem is that your device is not connecting to the Contacts database on icloud.
On the device, go to Settings>icloud. Be sure icloud is on and using the right ID. If not, scroll to the bottom of the page and tap Delete Account - this just disconnects the device from that account, no data is lost. Then log back in using the correct ID. ALSO - be sure the Contacts are turned on (on the same screen).
Note: Contacts are not part of an iCloud backup, since they are part of contacts database on iCloud's servers. So performing a restore will not help.
Contacts are gone from icloud.com.
Then they have been deleted. There are many reasons for this. One possibility is that someone else is using the same iCloud account (family member, etc.) and they deleted contacts, thinking they did want them on THEIR device. How to get them back? Unfortunately, an iCloud backup does not include any of the sync databases, like contacts, notes, calendars, reminders, etc. because the data is already stored in these databases. Your only hope for restoring the data is if you had that data on a computer (like a mac's Contacts, Calendars, etc.) and that data was backed up using whatever backup software you typically use (e.g. Time Machine on a mac). Just restore the data files back to the computer. Other than that, I'm afraid the data is gone.

Audio output and left USB port is not working!

Hi! I have MacBook Air 13" late 2010, Audio output and left USB port is not working!
What happened?
Part No.: Z0JH000TE RS

If the left USB port doesnt work with an external mouse its seems to be a hardware malfunction of this USB port.
The newest BIOS is already installed?
Have you removed all USB ports from device manager and restarted your notebook?
If you have already tried this, contact an authorized service provider. The guys can try to fix this issue and it should be covered by warranty, if you still have warranty on this notebook. :)

My Air port is not working the wifi - just an amber light blinking. What's going on ?

Similar Messages

Maybe you are looking for