My Airport Base Station does not appear in the Airport Admin Utility

I cannot see my airport extreme base station in the Airport Admin Utility nor in Airport Setup Assistant via Airport. It worked yesterday but when I was trying to set up a network something must have changed but I don't know what it is. (The setup didn't work so I am only using one base station right now.) The only way I can configure/reconfigure the base station is by physically connecting via an ethernet cable. Then no problem. I have two computers and neither can access the base station with Airport Admin Utility via Airport. I have installed the latest Airport Update but nothing has changed. What happened?

You should be able to use the second Airport Extreme
Base Station as a wireless print server. What I
suggest you do is:
1. run the Airport Admin Utility and clean up
settings on your existing Base Station:
- under the Airport tab, make sure you have not
selected to "create a closed network"
- under the Access Control tab, clear out all
settings
- under the WDS tab, clear out all settings
- under the Network tab, make sure the box is checked
to "Distribute IP addresses" and "Share a single IP
address using DHCP and NAT".
- update settings to the Base Station if you changed
anything.
2. do a hard reset of your second base station per:
http://docs.info.apple.com/article.html?artnum=107451
3. for now, put both base stations and the Mac in the
same room. Run the Airport Setup Assistant, and use
its guidance to configure the second base station as
a new base station that "extends" the wireless
network of your main base station.
That should do it.
Thanks very much. The printer works great from both computers via my second airport base station. And I can see both my base stations in the Airport Admin Utility.

Similar Messages

  • Steady green light on A1084. Airport Utility 5.6 says set up is complete.   Airport Express base station does not appear in the menu bar, so I cannot select it.  Is there a fix?

    Steady green light on A1084. Mac OS X 10.7.5. IMac. Verizon DSL Actiontec GT704-WGB modem. Airport Utility 5.6 says set up is complete.   Airport Express base station does not appear in the menu bar, so I cannot select it and send a signal to airport express to play airtunes through my stereo amplifier.  Is there a fix?

    I plugged a model A1034 Airport Extreme Base Station into the Verizon DSL Actiontec GT704-WGB modem with an ethernet cable and now the AirPlay icon appears in the Itunes window immediately to the right of the volume control and I can select it and play Airtunes wirelessly through the A1038 Airport Express Base Station in another room connected to a stereo amplifier by a Monster mini-to-RCA left/right audio cable running from the output jack on the A1034 Airport Express Base Station into the CD jacks on the amp.  The problem is that I have to select the Apple Network Airport Express Base Station as my network in order to select the Airport Express Base Station when I click the AirPlay icon, which means I have no Internet signal to the Imac. If I select the Airport Extreme Base Station or the Verzion modem as my network, then I have an Internet signal to the Imac, but the Airport Express Base Station is grayed out when I click on the AirPlay icon, so I cannot select the Airport Express Base Station and send tunes to the Airport Express.  It would be nice to play Airtunes while simultaneously accessing the Internet.  I don't understand your question about what program I am using for which I require AirPlay.  I am not learned about computers in general, and even less so about Macs than PCs.  I thought the program I was running was Itunes, and there was no separate program to run to use AirPlay for the purpose of sending a signal from the Itunes on the Imac to the A1084 Airport Express base station in a another room, and then out as described above to the stereo amplifier to listen to Itunes music remotely in the other room, without any kind of cable, wire, etc., connecting the Imac to the stereo amplifier.  I would guess that the most common use for the A1084 is to play Itunes through a stereo in another room without the need to run wires from the computer to the stereo.  I realize it would be easy simply to run a very long mini-to-RCA left/right audio cable across the floor connecting the Imac to the amp without the need to use AirTunes, Airplay or any kind of AirPort, but it would be both unsightly and a tripping hazard.

  • Airport base station does NOT deliver a solid connection!

    I have an older Airport base station (an extreme-square, flat, white, you know the one). Ever since I installed the most recent firmware update I get next to no data flow through from the provider. If I connect direct to the provider router via ethernet cable I get amazing connectivity speeds. I change the set up to connect via the Airport and I get either no connection or 5 KBS.... a speed, when it available is a joke. While trying to run through the Airport my Airport signal is full strength. It appears the base station does not know how to digest and dispense the information from the service provider into a full band of connectivity. The problem exists with both Apple laptops in the house. I have done all the required resets and restarts and to no avail. Connecting direct, which is a HUGE hassle, provides amazing speeds. I had none of these issues before I did the firmware update about three days ago (about 12.18.09). Any thoughts or directions to help me out?
    Thanks!

    Your Express requires an IP address to be issued by the device connected to its WAN port, in most cases that is a cable modem.
    Power down your modem and let it rest. Leave it powered down, connect it to your AirPort Express, then power it back up again. This permits the modem to supply the Express the IP address it needs.
    Like it says, if you still can’t connect, contact your Internet service provider.

  • Airport Extreme base station does not appear in Airport Utility

    I cannot see the basestation that I am connected to via WIFI or Ethernet.  I cannot see the basestation on ipad or iphone app either.  Basestation is working fine and i have connection working fine with a green light but cannot configure the basestation to allow guest networks or connect my external storage drive.
    any suggestions will be appreciated.

    OK. That should be a third or fourth generation Extreme, plenty new enough. (The most recent OS X and iOS versions of AirPort Utility cannot configure the original Extremes, but they can handle my mid-2007 second generation Extreme.)
    If two or three devices on the same network as the Extreme cannot "see" the configuration interface, I would guess that the problem lies in the Extreme itself.
    Have you tried power cycling the Extreme?
    Did you purchase AppleCare for your 2011 MBP? If so, and if you bought the Extreme less than two years earlier, the AppleCare should cover the Extreme also.

  • Time Capsule base stations does not appear in AirPort Utility

    I can't see my Time Capsule in Airport Utility 6.3.2. on Mavericks. And I can't access the Data volume for Time Machine Backup. The Internet is working!
    However I can see it the Time Capsule on my iPhone's Airport utility.
    I have tried rebooting Time Capsule a few times, didin't help.

    OK. That should be a third or fourth generation Extreme, plenty new enough. (The most recent OS X and iOS versions of AirPort Utility cannot configure the original Extremes, but they can handle my mid-2007 second generation Extreme.)
    If two or three devices on the same network as the Extreme cannot "see" the configuration interface, I would guess that the problem lies in the Extreme itself.
    Have you tried power cycling the Extreme?
    Did you purchase AppleCare for your 2011 MBP? If so, and if you bought the Extreme less than two years earlier, the AppleCare should cover the Extreme also.

  • Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?

    Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?
    Is it because the backup on progress?

    Hmmm.. ok.. well you are kind of on your own.. purchasing from another country leads to problems.. especially as the TC itself is regional .. all the setup applies to the region it is sold in.
    Make sure you are using ipv6 in the computers..
    See
    http://support.apple.com/kb/TS4597
    The 6.3 utility will not work without it.
    Make sure all names are short, no spaces and pure alphanumeric.
    Do a full reset and start over.
    But there are no more controls.. you cannot set mode..
    You can set wireless channels.. so do .. try different wireless names for the different bands.. and set fixed channels.. whatever your country allows, usually 2.4ghz you can use 1, 6, 11 but 13 maybe an option as well. 5ghz is much less clear and there are more variation. Just set to one channel and then another.
    Set WPA2 Personal security with a 10-20 character password .. pure alphanumeric mix of upper and lower case and numbers.

  • I lost my connection with my AirPort Base Station when I upgraded to the OS Maverick.  How can I get my system to recognize the base station again?

    I lost my connection with my AirPort Base Station when I upgraded to the OS Maverick.  I can still see the Internet, but the Time Machine cannot backup now because it cannot locate the AirPort base station.  How can I resolve this issue?
    Steps already taken with zero success:
    1. Restarted the AirPort Base Station multiple times.
    2. Restarted the Mac Pro multiple times.
    3. Looked online for AirPort update for 6.3.2 version.
    Other Apple products in my house can still see the AirPort Base Station, however my Mac Pro and Mac Book Pro cannot.
    Please advise.

    That information helps. If you want to use one of the SmartStor's disks as a repository for sharing your iTunes Library, then do not configure that disk as a RAID. Format it with Disk Utility using the Erase tab. Mac OS Extended (Journaled) is the correct choice.
    Connect it to your Time Capsule, then use AirPort Utility to configure access requirements for sharing it on your network. It should appear as a shared volume in the Finder, available to all your Macs as you thought it should.
    I also thought maybe the extra HD space would be added to the existing Airport Disk.  It isn't.
    Correct. There is no way to do that. The only way to increase the capacity of a Time Capsule's hard disk is to replace the Time Capsule (or its disk, if you are amenable to disassembling it) with a larger capacity model.
    If you also want to use the SmartStor as a RAID, that is another story, and you should probably attack that problem separately.

  • Why MSDAORA provider does not appear in the list of providers of management studio?

    I have a Windows Server 2008R2
    64-bit standard. with SQL Server
    Express with Advanced Services 2008R2
    64-bit. After performing the
    above installation and do all the updates, I installed
    Oracle 10G 32 bit client.
    open sql server management studio and looked
    at the list of providers. MSDAORA
    does not appear in the list. I can do to make the
    management studio put it in the list of
    providers.
    ps: this server must have the client
    installed Oracle 10G 32
    bit because I have several 32-bit applications
    that use this client

    Hello,
    MsDaOra is the old (bases on Ora 8.5) deprecated Microsoft driver for Oracle; you should avoid to use this driver.
    You can install the 32 bit and 64 bit Oracle OleDb driver parallel on the machine, that works. The you can use the driver version depending on the tool you work with.
    Olaf Helper
    * cogito ergo sum * errare humanum est * quote erat demonstrandum *
    Wenn ich denke, ist das ein Fehler und das beweise ich täglich
    Blog
    Xing

  • This AirPort base station was unable to extend the wireless network.

    I have an AirPort Extreme in the lounge connected to BT infinity.
    I also have an airport express in the kitchen connected to a stereo system.
    I have had this set up for around 12 months.
    The airport express will not extend the wireless network.
    I reset it, restart, factory reset etc and it will work fine for around 3 days, then I get the same error message saying
    This AirPort base station was unable to extend the wireless network. Make sure the wireless network you’re trying to extend was set up and is working correctly, that you entered a matching wireless network password into this device, and that this device is in range of the wireless network.
    The express is situated easily within range of the extreme. And the airplay between those two, my iMac and two apple tv's works pretty much as it should.
    Can someone please shed some light on this?
    Maybe I have it in a wrong setting or summut....

    G Beach wrote:
    I am also experiencing a recent failure in my Airport devices no longer extending my wireless network. 
    My Aiport Express and second Airport Extreme were extending my wireless network for more than a year
    The only change that has taken place lately is that the firmware for both devices was upgraded to 7.6.4, however the upgrade was only in response to trying to resolve this problem.  Needless to say, the firmware upgrade did not resolve anything.
    If I didn't know better, I'd have thought I wrote the above. 
    I have a TC from a few years ago (last one before the tower, I think), plus the older AEBS that it replaced extending the network, plus a 1-year-old Express also extending. I had upgraded them all to 7.6.3/4 when it came out, but reverted them all to 7.6.1 when everything went crapways (others having the same issues of the LAN regularly croaking), and didn't bother upgrading again since. 
    Today I just tried 7.6.4 on all of them, and it seemed OK at first with green lights all around in Airport Utility.  Then I made one change, which was to enable 5Ghz on the main AEBS/TC only (the express doesn't need it, and the older AEBS can't do it).
    The latter two started flasing amber and giving the "unable to extend wireless network" error message.
    So I'm wondering if you are similarly using 5Ghz?

  • Time capsule does not appear in the finder.

    My time capsule appears in airport utility. It is ready to go. I have it on ethernet because airport isn't a very powerful wireless router. The time capsule does not appear in the finder. It does not appear in the disc utility. It does not appear in time machine. The airport utility will do factory resets, get it ready for internet, whatever. The rest of my net work can not see it.
    I have done the finder preferences. I have restarted the computer, jiggered the sharing preferences, done factory resets, tried to find sparce bundles and sparse bundles, reset the finder, force quit finder, tried to find finder plsts, trawled the discussion pages, tried to find server addresses and apple ids. Nothing seems to work.
    Time capsule never seems to work as smoothly as it supposed to. I shudder to present my problems to apple support because I know that its a long road and will probably end in tears. But here I am, naked before this disappointing edifice.
    Does anyone have any ideas?

    What is the make and model number of your modem?
    I have a microwave modem on my roof. I don't think that has anything to do with this. I am not using my airport for a wireless router, only as a time capsule connected by ethernet. The Airport Utility calls my airport : Airport Extreme 802.11 ( 1st Generation )
    Is the Time Capsule acting as your main router or is another device handling those services?
    No, I have a lyncsis router. The wireless router function on airports doesn't seem to work very well. I don't think thats a problem with mine. My brothers have gone with lyncsis as well.
    Was the Time Capsule visible in the Finder before, and is now "lost", or has it never appeared in the Finder?
    It appeared on my previous laptop. That died. Now I have an imac. The airport has never appeared on the imac.
    Thanks for trying to help so quickly
    JOhn

  • Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

    Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

    I received no error message. The application was just trying to find applications unsuccessfully.
    I am using MAC OS 10.10.1
    I tried to uninstall the application  but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
    Otherwise I would have to reinstall everything and this would be a pain.
    Thanks for your help.

  • My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

    My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

    Press the escape (esc) key to exit full-screen mode.

  • HT1414 HOw do I back up and restore If I plug my ipod in and it does not appear in the devices column. I have a white screen and i'm trying to fix it and nothing is working :(

    How do I back up and restore my ipod touch if when i connect it to itunes It does not appear in the devices column? I have a white screen and have tried holding down the wake/sleep and home buttons and that is not working. Please help

    Take it in for repair/replace to your local Apple retailer.

  • My unsorted bookmarks folder does not appear in the bookmarks drop down menu.

    My unsorted bookmarks folder does not appear in the bookmarks drop down menu. I can only reach it though Organize Bookmarks function. How do I get it into the bookmarks tree?

    Unsorted Bookmarks Folder Menu: https://addons.mozilla.org/firefox/addon/7269/

  • How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
    Customized Progress Indicator - Captivate blog
    If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
    And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

Maybe you are looking for

  • To retrieve the Maximum Date from the record

    Hi All, I am using the bleow query to retrieve the max date from the record list: select w.wr_no,w.customer_id,w.place_id, w.entry_Date, max(app.appointment_date) as appointment_date from work_request w , wr_appointment app where w.wr_no=app.wr_no an

  • How to replace Nexus5596 with dual-homing N2K

    What is the correct process to replace a FEX parent switch with dual-homing fex? Traffic should not be interrupted.        

  • Credit and debit a/c are posting in same account

    After generating invoice when checking the accounting documents the both credit and debit accounts are posting into the same accounts. T-code:FB03. How to solve this? Regards, C Chaitanya

  • Pattern fill question

    Hi i'm a student and learning how to work with with photoshop, indesign and illustrator. I've only been practesing for a month and a half now but we al had to start somewhere Now my question is: i've been trying to get a pattern fill in illustrator w

  • Not sure what I did or how to correct this...

    My iMac is taking a screen pic of every website I go to. These pics are now showing up on a slideshow on my apple tv . Has anyone had this problem?