My airport card appears as "not installed" what now?

My airport card appears as "not installed" what now?

Hi Pastorjtc,
More than likely HP is not going to support hardware for Windows 8 on any system purchased before Oct 1st 2011.  Most Windows 7 drivers will work in Windows 8.
Check out this page to see if your computer has been tested by HP with Windows 8.
You can run the Upgrade assistant software, which will scan your PC and generate a report on what is currently installed on your PC is compatible with Windows 8.  This upgrade guide for Windows 8 provides a lot of information that is needed for anyone considering upgrading.
I hope this helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • Macbook airport card says its not installed

    need help my mac book pro says that my airportcard isnt installed nor my bluetooth ..
    i just swapped my whole screen and only removed 2 wires put them back.. only thing that does work is the airport and bluetooth any help please
    in the vegas area if anyone could help me get this going

    There are two different versions of Flash, the '''''ActiveX''''' version for IE and the '''Plugin''' version used by most other browsers.
    1.Download the Flash Plugin version setup file from here: <br />
    [http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
    Save it to your Desktop.<br />
    2. Close Firefox using File > Exit <br />
    then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
    {XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
    3. Then run the Flash setup file from your Desktop.
    4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
    * On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). <br />
    See this: <br />
    [http://vistasupport.mvps.org/run_as_administrator.htm]

  • Airport Card appears to be uninstalled on MacBook Pro

    Hey Folks,
    I was attempting to help a friend who recently purchased a MacBook Pro off ebay update the software on his computer. After downloading a number of firmware updates and OS software updates his Airport stopped working. It appears that his airport card is no longer installed, however we did nothing to the card itself. I attempted to find support on-line on apple's web site under airports and installing airport cards, but nothing would appear when I typed "installing airport cards" in the search window. Where do I go to check the airport antenna on his MacBook Pro? In the network preferences the airport is grayed out, so it is not possible to turn it back on. Please disregard the laptop model in my user information. The information there is my computer and not my friends.

    Welcome to Apple Support Communities
    You have a Mid 2010 15-inch MacBook Pro, which supports 8 GB of memory. Your MacBook Pro requires 1066 MHz DDR3 RAM. You can have a look at all the memory specs in this site > http://support.apple.com/kb/HT1270?viewlocale=en_US&locale=en_US#link2
    You can buy more RAM at OWC or Crucial > http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3 You can buy RAM from other sources, but if you buy RAM from these two websites, you can be sure that the RAM will work with your Mac.
    If you want to have a look at other brands, Corsair and a lot of manufacturers sell Mac-compatible RAM > http://www.corsair.com/us/memory-by-product-family/mac-memory-upgrades.html

  • Airport extreme software will not install on vista, how can i still configure the router?

    airport extreme software will not install on vista, how can i still configure the router?  Trying to help someone with vista get an airpot extreme configured.  10.0.1.1 does not work, the software will not install correctly on their vista machine.  How can I get into the base tation and lock it down?

    Hi - Vista can be tricky - I need more info to see if I can be of some help - first, is the Vista machine a desktop or a laptop and is it fully up to date with Windows Update (sp2 or higher)? - next, are you trying to install Airport Utility version 5.5.3 which is the correct one for Vista? - and finally, what do you mean "it will not install" - what kind of error messages or evidence are you getting?

  • Icloud keeps emailing me saying my account cannot be billed - please go to "settings" and click on "accounts".  There is no "accounts" in my icloud .  I checked into apple accounts and it says the credit card has expired.  It has not.  what now?

    icloud keeps emailing me saying my account cannot be billed - please go to "settings" and click on "accounts".  There is no "accounts" in my icloud .  I checked into apple accounts and it says the credit card has expired.  It has not.  what now?

    The credit card used is that registered in the iTunes Store. Open the Store and go to your account. Click 'edit' next to 'payment details' and amend the card details if necessary.

  • Trying to make a purchase and it says that iTunes doesn't support or is not installed what do I do?

    Trying to make a purchase and it says that iTunes doesn't support or is not installed what do I do? Or that I'm not signed in

    Do exactly what it told you to do and contact itunes support

  • HT4009 still not installed what i purchased but the amount already deduct please help me..

    till not installed what i purchased but the amount already deduct please help me..

    Assuming that you are referring to an in-app purchase, then if you haven't received it then try the 'report a problem' link to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • TS1292 my itunes card code is not legiable. what to do??

    my itunes card code is not legiable. what to do??

    See Here...
    http://www.apple.com/hk/en/support/itunes/store/giftcard/
    If no joy...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I have an itunes gift card that does not work what should I do?

    I have an itunes gift card that does not work what should I do?

    Give me more details (but don't state the code).

  • When I was updating I Phone version 4  from iTunes. it got stuck in middle of updating, after uninstall the version 3 and new version 4 was not installed. Now iTunes is not detecting the iphone and my iphone is also not working n showing connection cable

    When i was updating i phone version 4 from Itunes. It got stuck in middle of updating, after uninstall the version3. But new version was not installed. Now itunes is not detecting the iphone and iphone is also not working and showing connection cable with itunes. Pls help..

    Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
    (Do not use your own Anti-virus to SCAN)
    Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
    http://www.malwarebytes.org/products/malwarebytes_free
    Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
    To start your computer in safe mode
    Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
    On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
    When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

  • Airport card with G4 - not connecting

    I have an Airport Extreme base station connected to my home Windows computer. It appears to be set up fine and broadcasting fine. I get a good signal on my laptop MacBookPRo. I just installed a Airport Card in my older G4 733MHZ PowerPC. I believe it is installed right. The system profiler recognizes it. The base station is upstairs at my house, the G4 downstairs. I am not getting a signal to the G4. The laptop is getting a signal sitting right next to it. Distance is only about 20yards between base station and computer although it is downstairs. Seems to be something wrong with Card or the cards ability to read a signal compared to the built in card in the MACBOOK PRO. I have moved the base station as close as I can. Not sure why one would get the signal and not the other. Any ideas.

    Your Power Mac G4 733 MHz requires the original 802.11b AirPort card. This card's maximum wireless speed is theoretically 11 Mbps.
    There are two reasons why the card may not be receiving a signal:
    (1) The network is configured to operate at 5 GHz or 802.11n only. You would need to ensure that your AirPort Extreme base station (AEBS) is configured to operate in an 802.11b compatible mode for the Power Mac G4 733 MHz to be able to see and connect to the wireless network.
    (2) The antenna wire inside the Power Mac G4 733 MHz is not connected to the AirPort card. You would need to find and attach this wire to the card.

  • Airport card (802.22b) not receiving wifi signal(?)

    The subject line pretty much says it all. I am currently receiving the internet via an ethernet cable since it seems that my old eMac is unable to receive wifi signals from anywhere, even from my own modem which is roughly three feet from my computer. I have tried reconnecting the antenna wire to my Airport card and reseating it in the computer without success. Any suggestions? Thanks in advance to all who answer!

    I checked System Profiler and this is what I got:
    Wireless Card Type: Airport
    Wireless Card Locale: USA
    Wireless Card Firmware Version: 9.52
    Current Wireless Network: wireless network not available
    Note: Airport was turned on at the time I checked System Profiler

  • HT4059 My iBooks are not installing what could be wrong?

    When I download iBooks they are not installing on my iPad

    Some USB 2.0 ports and accessories do not provide enough power to charge iPad. When this occurs the message "Not Charging" appears in the status bar next to the battery icon.
    Hence it is always recommended to use the iPad charger.
    Refer www.support.apple.com/HT4060

  • Airport card (old one, not Extreme) and WPA2?

    seems it doesn't support WPA2, is that right?
    10.3.9, iBook G3, Airport 4.2 software

    Good question - it isn't an issue someone has mentioned here before (and I never checked). If that is the case, it sounds like Apple forgot to change the programming to make sure that option wasn't provided (after you click "other") on Macs with original Airport cards. Suffice it to say - WPA2 most certainly is NOT supported on a Mac equipped with an original Airport card.

  • I am in Aperture photos-browser - view. Amtrying to find "sort"  by file name to elimanate duplcates.  Sort option does not appear. Not sure what I am doing wrong.

    I am in Aperture -photos - browser - view.  Am trying to find "Sort"  by filename to elimate duplicates. I cannot find "sort in Viewer and not sure what I am doing wrong.  Help

    This is what the top of the Viewer should look like:
    Here is the same view with the pulldown opened:
    What is it that you see? Include a screenshot.

Maybe you are looking for