My airport express 802.11g won't connect to my mac mini

Hi
I have recently purchased an Airport Express 802.11g and I can't get it to connect to my Mac mini. It shows up in the wifi menu at the top of the screen but when I click on it it says
This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information.
Can anyone help?
Huntymc

Have you tried restarting the system? Many times that will resolve the issue?
If you are still having problems do you have a USB mouse that you can use to open the Bluetooth preferences and then either reconnect to the mouse, or delete the pairing, then reconnect to the mouse?
The following article may help:
http://support.apple.com/kb/TS3048#1

Similar Messages

Airport Express 802.11g cannot connect with OS X 10.8.3

Hi just updated my MacBook Pro to OS X to 10.8.3. I have an older model Airport Express (802.11g) that I have been able use to set up wireless speakers via Airport Utility 5.6 and 5.6.1. However, this most recent Mountain Lion update has rendered my Airport Express useless. I have to restart Airport Express each time I want to try to use it, to which Airport Utility will find the device and successfully add it to my existing wifi to allow me to play music wirelessly through my speakers. The second I close my MacBook, though, everything disconnects and Airport Utility is no longer able to find my device. The green light is steady on the Airport Express, so I know that is hooked up and working correctly. Is there a fix for this....? Thank you!

See if setting a static IP will correct the problem. Step 5 in the document below will walk you through the steps. Let me know what happens.
Printer Does Not Maintain Wireless Connection
I am a printer tech for HP.

Airport Express 802.11g Airplay Connection Issues

My dad has had an AirPort Express 802.11g hooked up to his stereo for a couple of years now. Uses it only to stream music. Our WiFi network is run by an older AirPort Extreme 802.11n (2nd Generation). Express firmware is at 6.3, as high as it can go for the g models.
2 months ago, I got my dad an iPhone 5 running iOS 6, and upgraded his MacBook to run OS X 10.7 Lion so he could sync and use iCloud and all that stuff. From that moment forward, connections to the AirPort Express are awful or nonexistent for most devices. Many times after you tell iTunes or the Music app to connect to it, when you hit play nothing will happen. Sometimes the progress bar will move, but no sound will play. Other times the sound will start, go for ~5 seconds, and then cut out. No issues with staying on the WiFi network.
Devices AirPlay DOES NOT work properly with:
- Dad's MacBook (final-gen plastic model) running OS X 10.7
- Dad's iPhone 5 (iOS 6)
- My iPhone 4S (iOS 6)
Devices AirPlay DOES work with:
- Dad's older iMac running OS X 10.6.8 Snow Leopard
- My MacBook Air running OS X 10.8.4 Mountain Lion
None of his music is on the iMac, and the concept of doing a VNC to make it work would be far out of his level of understanding.
Is this a case of me just needing to get him a new AirPort Express for full compatibility, or is there another workaround? Eventually I'm going to get him off of his MacBook and up to something more currently, like my Air in September when I upgrade.
This is practically the only thing my dad uses his computer for, so any help I can receive to get this working would be MUCH appreciated.

Hello niclake,
I found an article for you that would be a good place to start troubleshooting Airplay on the AppleTV.
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Troubleshooting performance issues with AirPlay or AirPlay Mirroring
If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express. Try the following suggestions:
Ensure that other devices are not trying to stream to the same Apple TV at the same time.
Turn off Bluetooth on your iOS device by tapping Settings > General > Bluetooth.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If possible, try to locate your Wi-Fi router in the same room as your Apple TV and iPhone/iPad.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
All the best,
Sterling

Can my older Airport Express 802.11g join an existing wireless network

I have a Airport Express 802.11g firmware version 6.3 . Using the most recent Airport Express Utility I can set it up as a base station on its own independent network but I cannot join it to my existing home wireless network. As I go through the wizard (or manual setup) It just does not detect/display any existing wireless networks. I have plenty of mobile devices in the house that can see the wireless network...and next doors network.
So, it begs the question ... is an 802.11g unit actually capable of joining another network or is this capability available on later models only. A search of apple support and the wider internet for "Airport Express 802.11g capabilities" yeilds a blizzard or useless info.
Thank you

Sorry, I cannot help on Windows since I do not have a Windows 7 machine here to test. I have used XP in the past and AirPort Utility appears to be virtually the same in Windows as a Mac. I assume that this is the case for AirPort Utility 5.6.1, and it should be able to configure the Express.
The older Express will join most wireless networks if the following conditions are met:
1) The Express is functioning correctly.
2) The wireless network name is 12 characters or less and it contains only normal letters and numbers. Avoiding blank spaces in the wireless network name will help improve the chances of the Express joining the network as well.
3) The wireless router is broadcasting a compatible signal that would allow the "g" Express to connect. If your network is broadcasting a wireless "n only" signal, the Express cannot connect to this network.
4) The wireless security on the network is set to a WPA compatible setting. That is because the older Express has difficulty joining 3rd party wireless networks using WPA2 Personal or WPA2-PSK-AES encryption. In other words, if your network is now using WPA2 Personal or WPA2-PSK-AES settings, the "g" Express will probably not be able to join the network.
5) If you are using MAC Address Filtering on your network, the MAC address of the Express will need to be included in your settings.
6) The wireless network password uses the same guidelines that appear in 2) above
The items noted above will provide the Express with the best chance of joining your network. Plan to use the Manual Setup option in AirPort Utility and be prepared to use the Option or Alt keys on the PC if needed.
If you are looking for a guarantee of success in advance for this task, I cannot provide that and you should wait for another user to post who might be able to meet your requirements in that regard.

Airport Express 802.11g Not Cooperating

So for the longest time I had an Airport Express (802.11g) connected to my Time Capsule (802.11n first gen) with an xBox 360 hooked up to the Express via ethernet cable and it allowed my 360 to access the internet so I could use Netflix and whatnot. A couple of months ago the Express stopped working well and constantly had to be disconnected and reconnected to its power supply in order to function properly. Now it has completely ceased to work, so I restored it to factory defaults and nothing is working. First I tried to just have it join my wireless network, but once it connected the ethernet port stopped working. I didn't remember this happening before, so I went online and found out that joining a wireless network disables the port for some reason and that the only solution was to set up a WDS. So I tried this with my Time Capsule as the main and my Express as a remote (note: I am using Airport Utility 5.6 so that I can actually detect my Express) and on the Airport Utility Window it says that everything is fine and that both devices are reporting "Normal" as their status (green light). That is true for the Time Capsule, but the Airport Express keeps flashing its amber light of doom. When I clicked on the status for the Express, it said that the Express wasn't reporting any issues, so I have no clue what to do. Both devices are on the same channel, and the Time Capsule Radio Mode says that it is compatible with 802.11b/g devices. Also, the Airport Express, even though I selected "Allow Wireless Clients" cannot be accessed unless I connect it to my computer with an ethernet cable. Does anybody know how I can fix this? Any help at all is appreciated. Thanks!

UPDATE: I reset the unit, and was able to configure it using AirPort Setup Assistant, but although the light is still solid green, iTunes and AirPort Admin still can't see it.

Airport Express 802.11g ethernet out

I'm getting the new Samsung 2550 bluray dvd player. If I connect it to an ethernet connection it will stream Netflix movies and Pandora radio thru my home theater. Can I get ethernet out of my Airport Express 802.11g that is streaming AirTunes music to my home theater and into the Samsung? The Samsung isn't wireless. If not, does the APE 802.11n support ethernet out?
Thanks

Thanks for the correction. I have an Airport Extreme 802.11g connected to a dsl modem. It is broadcasting to an Airport Express 802.11g at the living room home theater (AirTunes) and also to another Airport Express 802.11g in my son's room for the PS3 connection. Everything works great now. The <...> ethernet jack on the living room express is empty but I thought it was only for connecting to the dsl modem. It can be configured to provide ethernet out without screwing up my home network?

Airport Extreme 802.11n and AirPort Express 802.11g on same network. Speed?

I am migrating all our Macs to 802.11n. I will have a new Extreme 802.11n base station, and all Macs will be newer models with 802.11n. However, I have an older Airport Express 802.11g that we use for the shared printer.
I have read that the ENTIRE network will run at the speed of the slowest device. Is this true? I know that the printer can only communicate at g, but will I also see the macs having to slow down to g? If so, I will upgrade to a new Express.

I have read that the ENTIRE network will run at the speed of the slowest device
That's not exactly true, but it will certainly degrade the network. A new Express (N) is your best solution to maximize the speed of your network.

Airport Express 802.11g Setup with iOS Airport Utility

I'm traveling with just an Airport Express 802.11g model and my iPad mini. I want to change the settings on the Airport Express but the Airport Utility for iOS says this base station isn't supported. Do I have any options available to me to change the settings on the road without a computer?

Yeah, that's what I gathered. Question is, do I have any alternate means of configuring it? For example, a web interface.

Airport express 802.11b doesn't connect to Linksys E3000

airport express 802.11b doesn't connect to Linksys E3000
Linksys told tha de the device does not support WPA security
BUT
the device has capability to WPA and it was working on Linksys WRT 310n v2
is out there an solution?

If you have tried numerous default resets, then the Express is defective. Normally, it displays a solid amber light...or no light.... when an internal component fails, but I've seen the solid green as well.
If it's in warranty, Apple will replace the device.
If it's not....and you want to try a real longshot....carefully saw open the case along the center seam to open up the device. You might get really lucky and find something obvious like a connector that has come loose, or something similar.

AirPort Express 802.11g and WDS

The other evening I spent two hours unsuccessfully trying to add an AirPort Express 802.11g as a WDS remote station to an existing AirPort network hosted by an 802.11g AirPort Extreme. The computer was using Mac OS X 10.5.4 and AirPort Utility 5.3.2. I believe both AirPort units have the latest firmware.
I've been able to do this in the past elsewhere, but it seems like every time I try this, I'm successful despite my efforts instead of because of them.
The AirPort Express Setup Guide 5.1 (http://manuals.info.apple.com/enUS/AirPort_Express_SetupGuide5.1.pdf) doesn't offer much help: "Open AirPort Utility and follow the onscreen instructions to extend the range of your AirPort Extreme or AirPort Express network."
Apple's online support doesn't help much either. This knowledge base article (http://support.apple.com/kb/HT2044) discusses the AirPort Admin Utility, not the AirPort Utility. The feature to "auto configure as a WDS remote base station" that seemed to make this so easy with AirPort Admin Utility had is gone from AirPort Utility.
Can anyone offer any advice about how to make this work? I've stumbled across some advice like making sure that the channel numbers are the same on both stations, but it would be nice if some Apple document had the computer story in one place. It would be even nicer if AirPort Utility had the same "auto configure" feature that the AirPort Admin Utility had.
Thanks for any advice.

I realized days later that I already had the information I needed. The electronic book "Take Control of Your 802.11n AirPort Extreme Network" (from http://www.takecontrolbooks.com/airport-n.html ), which I already owned, notes that the following items much be set the same on both AirPort stations:
- radio mode
- channel
- base station password
- wireless security method
- wireless password
I think my problem is that one station was set to a specific channel while the other was set to the default choice of "automatic".

HT5022 How can I configure an AirPort Express 802.11g on Mac OSX 10.8.5?

I can't configure an Airport Express 802.11g using a MacBook Air with MacOS X 10.8.5 installed.
AirPort Utility 5.6.1 cannot be installed on a computer running OS 10.8.5...
Help!

As you know you cannot administer the older 802.11g AirPorts from Macs running the latest OS X versions or from an iOS device.
You still have a few options to do so:
Use a Mac running OS X Lion 10.7.2 or lower.
Use a Windows PC running Windows 7 or lower.

I have a airport time capsule, an older airport extreme, and an airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?

I have a airport time capsule, an older airport extreme, and an older airport express. I want to hard wire my Mac Mini to the network. What is the best arrangement of the devices? which ones should be hard wired to optimize extending the network?

I am using TM Unifi with an ASUS RT-N18U Wi-Fi router. I would like to know could I use Apple AirPort Time Capsule to extend (repeater, booster) my Wi-Fi to a part of the house where the Wi-Fi signal is poor
Yes,, if you plan to connect the AirPort Time Capsule to the ASUS router using an Ethernet cable connection that will remain fixed and permanently installed at all times.
No, if you were planning to have the AirPort Time Capsule connect wirelessly and extend the Asus WiFi signal, since it would not be compatible with another manufacturer's router for that purpose.
Another way of saying the same thing here would be that if you want to extend the network wirelessly, it will take two Apple routers to do so

My Apple wireless keyboard won't connect to my Mac mini any more.

My Apple wireless keyboard won't connect to my Mac mini any more. Going through the Bluetooth Setup Assistant doesn't help - the computer finds the keyboard, but when I type in the pass code it fails to pair with it. The green LED on the bottom of the keyboard flashes twice at roughly two-second intervals. I've tried replacing the batteries and this has had no effect. I have all the latest software updates installed.

Welcome Cheirhandrea!
There are easily hundreds of variants of the iMac dating back to 1998. Many of the pre-2006 iMacs this forum covers cannot support an Apple wireles keyboard. Because this model has been in production for so long, it is important for you to let us know as much about your computer as possible so someone won't give you information that may not be appropriate to your iMac variant.
So we need to know:
1) Your processor type and Mac OSX version, both available by doing "About this Mac" from your Apple menu at the left end of the menu bar:
2) The make and model of the keyboard.
I asked for your Mac OS version because "iOS" as currently shown in your equipment profile cannot run on any Mac computer, only Apple's mobile devices. Once you get the OS version from "About this Mac," please change your profile to avoid further confusion and get help faster without the delay of someone having to ask for clarification before they can start helping.

Airport express 802.11g connection problems

I own both an intel mac mini and a macbook, both running Leopard. I also own an Airport Express, which until about 4 months ago worked flawlessly. Since about Jan or Feb, my internet connection (via AT&T DSL) has gotten so flaky that I wind up using a neighbor's unprotected wireless connection (as I am now), even though my router is literally 3 feet away from me! I can't even connect to my router! I live in a condo, and have been told the signals from other wireless routers are "stomping" on my own wireless signal.
I have been told to move the router away from any electronic devices, but before this whole thing happened, my router was even closer to my computer than it is now, and worked without a hitch.
What do I do with this? A guy at a local Apple reseller suggests I upgrade to the latest Airport Express (802.11n), but I want to make sure I explore ALL options before spending the bucks.
PLEASE advise...

I had the same problem with my AirPort Express. After much trouble shooting on the phone with Apple, they told me the same - that electronics were interfering and we needed to turn off all electronics. Did that and problem continued. They stayed their argument. I took the Airport Express router to a remote location where there was no chance of any interference. Problem continued. Again I called Apple - they stayed their argument. I convinced them to send me a new one. Fixed the problem. That one died about 1 week later. Called Apple again (and repeated the process). I asked them to send yet another new one. They said no because it was obviously MY problem - or something with the area where I was using it (even though I tried it in different locations). I took it to the Apple Store - they ran a diagnostic and yep, it was a problem with the router. So, I'm on my 3rd one -it's been working for a few years now.
My diagnosis is a bad Airport Express. Don't let Apple tell you it's a problem with "electronic interference" because likely its a faulty device and they don't want to take the flack for it.

Old Airport Express (802.11g) and Intel Core 2 Duo iMac (802.11n)

Hi guys!
I used to have an iMac G5 with *Built-in 54 Mbps AirPort Extreme (802.11g)*
Then I bought an *Airport Express* and I am sure that by the time it was still an *Airport Express with (802.11g)*
Now that I have a brand new new iMac that is *Intel Core 2 Duo iMac (802.11n)*
Will I have problem trying to connect it to the Express because it is n and not g?
Thanks!

No. The Airport Extreme card in your iMac automatically negotiates 802.11b/g/n. It will work just fine with the Airport Express.

My airport express 802.11g won't connect to my mac mini

Similar Messages

Maybe you are looking for