My airport express can't locate a dns server

I am unable to connect to the Internet, with my Mac,iPad or iPhone, even with the light green. I used my airport utility and it can't find a Dns server.
I called my Internet provider and they said everything looked alright on there end.
Does any body know what it might be?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref:Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Similar Messages

AirPort Extreme can't find Comcast DNS Server

I have a relatively new AirPort Extreme Base Station router purchased from BestBuy in 4/2014 along with a new Motorola modem receiving Comcast Blast! internet service (because I have no other option as a San Francisco resident). I am running OSX 10.9.4 on a MBP retina but this problem affects all devices on the network, hard-wired and wireless.
My internet has been working fine since initially configuring the router and modem but the other night the internet simply stopped.
A full reset of the modem, router in the proper order, while waiting an appropriate amount of time to release the IP returns me to the same "disconnected" state (see attachment).
Since the internet is able to be obtained by connecting directly to the modem, Comcast blames the router, refuses further support and suggests calling Apple.
The Airport Extreme appears to be in perfect working order and I tried restore it to factory setting several times to no avail. The peculiar thing is that occasionally following a restart via the menu in AirPort Utility, the internet briefly becomes available and then disconnects.
This has been on of the most frustrating consumer experiences I have ever had on many levels mostly because after several days, I still am at a loss for a viable solution which is compounded by the fact that I am a computer scientist working in tech, not a helpless, technology-illiterate person.
I do not know enough about DNS Servers to pinpoint why the server appears to refuse internet when it notices the router.
Are there any configuration settings I can try on the advanced dialogs (ie switching from NAT/DHCP to only DHCP)?
Please help. I still have no internet.

There is a bad bug with some Motorola modems with the ethernet on the WAN port.
It is simply not connecting properly. What modem is it??
It is not uniform.. but it happens to a large enough number of people that there is a fair number of threads about modem issues and the newer airports.
Please do a search yourself here for experience with your particular model.
But you have blotted out the very info I need to help you.
I need to see IP address and DNS.. if you are on dynamic IP it makes no difference to post it.. you will have a new IP tomorrow.
I have suggested a work around in using a crossover cable or a small 10/100 switch between the modem and the airport.. it helps for some.
There is also some more info you can get using the natutil command from terminal.. particularly it will show the WAN link speed.. which I want to force down to 100mbit.
Terminal command to check Apple router status. natutil
No luck return the airport to apple for checking / replacement.. or bridge it and buy another router.. this isn't hard and Apple will doubtless produce a new firmware that might fix it if it isn't some nasty hardware thing.

If i have a home full of Apple TV's and Airport Express' can i airplay music in every room at the same time?

If i have a home full of Apple TV's and Airport Express' can i airplay music in every room at the same time?
Or just one device(room) at a time?
It seems there is a lot of home theater systems where they all hook up to one "control" and then disperse to the different locations per instructions..
Is this possible with all apple products?

From iTunes using Multiple Speakers (you can control with the Remote app on iPhone/iPad too), but not from AppleTV itself.

I have an Ipad and Iphone but I don't have an Airprint, only a WIFI printer,my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ?

I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.

Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device.

After updating Time Capsule to 7.7.2, Airport Expresses can no longer connect

After I update the Time Capsule firmware to 7.7.2, my three Airport Expresses can no longer connect to the Time Capsule (their orange lights blink and they appear inaccessible in the Airport Utility). When I downgrade, they are able to connect fine.
They are connecting to the Time Capsule over my 5GhZ wireless network.
Any help?

Hi yonajon!
I have some resources for you that may help you resolve this issue. First, here is an article about addressing the blinking amber light:
Wi-Fi base station: Understanding and resolving a blinking amber status light
http://support.apple.com/kb/ts1589
If you are still having issues, you may need to reconfigure your extended wireless network:
Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n)
http://support.apple.com/kb/ht4259
Take care, and thanks for visiting the Apple Support Communities.
-Braden

How many airport express can i install in my home to stream music?

I plan to buy many airport express in my new Home!
how many airport express can i install in my home to stream music?
Jimmy

jimmyflo wrote:
I plan to buy many airport express in my new Home!
how many airport express can i install in my home to stream music?
Theoretically as much as you want but there are technical limitations about the usable bandwidth in the wireless or by the used access point.
All participants (stations) in a wireless network share the available bandwhith equally and therefore a point will get reached where the throughput in the network became insufficient to stream music.
Also some routers limit the number of stations could get connected. For instance Apples Airport Extreme have a limit of 50 connected clients and the AP-Express (if used as access point) a limit of 10 simultaneous connections.
Lupunus

How can I determine what dns server the wifi client use within airport

How can I determine what dns server the wifi client use within airport
I want to use dns servers other then the one that airport extreme is using. For example I got the 172.16.1.1 (the default gateway - airport extreme), but I want to use the office dns servers, that are in a 10.x.x.x range.
Is there a possibility?
Thanks and happy eastern

The Airport Extreme uses the DNS servers assigned by the network that it connects to. Is you Airport Extreme on the 10.x.x.x network? if it is then you are already using the 10.x.x.x DNS servers. Check your Airport Extreme with the Airport Utility and you will see in the Internet tab, the DNS servers used. The devices connecting to the Airport Extreme are assigned a DNS address of the Airport Extremes IP, In your case 172.16.1.1 but all DNS searches and resolution are done with the DNS servers you see in the Airport Extreme.
If you want to use some other DNS then you can override in the Airport Extreme which will be used by all devices connecting too the Airport Extreme, Or you can edit the DNS address in each devices wireless settings.

HT1731 Airport Express: Can't connect to existing network in Client/Bridge Mode

I have a new Airport Express that I'm trying to use to connecto to an existing wireless network to provide wireless access to a Mac Mini with a broken antena.
The Mini has it's non-functioning wireless turned off, an ethernet cable connected to the WAN port of the Airport Express and I'm trying to follow the directionf from here: http://support.apple.com/kb/HT1731?viewlocale=en_US&locale=en_US The relavent portion is:
Using AirPort Utility 6
Connect an appropriate cable between the AirPort Express and the device it will serve.
Plug the AirPort Express into a power outlet.
After the AirPort Express starts up, select it in the AirPort Utility screen.
If you are now repurposing the AirPort Express, first reset it from Base Station in the menu bar and selectRestore Default Settings.
After the AirPort Express completes the restore process, choose it from the Wi-Fi menu in the upper-left corner.
Click the Other Options button.
Select "Add to an existing network".
CHoose the Wi-Fi network name from the Wireless Network Name menu that you wish to join and click next.
Enter the password to this network if required.
I cannot get past step 3 w/o actually configuring the AE. If I follow the propmts on the screen (by jumping to step 7), I get the error "No Base Stations Found." I know the wireless router works because the Mini can reach it even with it's broken antena, and three other decives in the samre vicinity can connect to the existing wireless network.
If I turn on the wireless on the Mini, the Airport utility find the newtork, but gives a "unknown error" when trying to connect. If I try to use the ethernet port on teh AE instead of the WAN port, the Airport Utility says that the ethernet cable needs to be connected to the WAN port, but Airport Utility shows a diagram for connecting to the Cable Modem Directly.
I'm pretty stumped here.
Ray

Found a solution a few mins ago:
Unplug the AirPort Express
Disable the WiFi on the Mini
In Network Preferences, set Ethernet as the default connection using DHCP.
Connect the Mini to the LAN port for the AirPortExpress
Plug-in the AirportExpress
FROM A DIFFERENT COMPUTER CONNECTED TO THE WIRELESS NETWORK, follow steps 6-9 above.
This worked for me, but I don't know how to resolve the issue if you don't have a 2nd computer available. I had also tried this via Airport Utility on an 1st generation iPad, but that didn't work. Maybe somebody in the same situation could try it with an iPad that can run a newer verion of iOS.
Ray

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

How many airport express can be supported by software remote at one time.

how many airport express can be supported by software remote at one time?
I mean remote software can control at one time

Well Apple makes an iOS application called 'Remote' it's used to control iTunes on a Mac, Or to control an Apple TV Multimedia features.
Apple also makes "AirPort Utility" for iOS. Airport Utility can be used to configure Aiport Extrem, Airport Express And Time Capsul using an iPad, iPhone or iPod Touch. You can use it to connect to one device at a time. While connected to the device you can configure it to work as part of a larger Airport network. If you want to configure muliple device, you would connect to one device, configure it, And then connect to the next device, and configure it, and so on and so fourth.
I haven't found a limit.
How big of a network are you trying to make?

Airport Express can only extend network, not create new one. Why?

I am sharing a flat with some friends. The shared broadband router is placed in the living room. To strengthen the signal and make it easier for me to manage, I bought an Airport Express, connected it to the shared router with an ethernet cable and set up a wireless network of my own in my room. It was working fine, until recently we renewed our broadband contract. The router had been replaced by a new one (I don't know why) and the network configration had been changed. Since then I was not able to use my own network. In the Airport Utility display, the light of Airport Express is green, but the light of Internet is yellow, and the status is disconnected. I tried to change various other configuration on the Airport Express, and all in vain. Until I switched the network mode from 'Create a new wireless network' to 'Extend a wireless network', the Internet connection was finally back online. But this merely extends the existing network and not what I want. Why this happens? Why my Airport Express can only extend a network, not create one?

Here is the situation on my Airport Express.
If I choose to extend the existing wireless network, the Airport Utility shows like this:
If I set up a wireless network of my own, what I get in the Airport Utility is this:
See my problems here? The Airport Express does not show anything in amble, but the Internet complains that there is no connection.
This problem did not occur before the broadband was renewed and the rounter was replaced.

Airport express can't extend wireless network

Airport express(A1264) can't extend wireless network. It seems that Airport express can't find my home Wi-Fi network. Amber light is blinking, and AirPort Utility of MacBook also can't find Airport express.
If AE is connected with TC via LAN cable, amber light is blinking with message "Wireless Network" (This Airport base station is set up to join a specific wireless network that can't be found...)
It was successful only once, but all failed after that.
Is there solution for this problem?
[My system]
Time capsule 4th generation
Airport express 1st generation (A1264)
[Settings]
Time capsule (ethernet connected)
- Create a wireless network
- 802.11a/n - 802.11b/g/n (Automatic)
- 2.4GHz / 5GHz Channel (Autmatic)
- WPA2 Personal
Airport express
- Extend a wireless network
- WPA2 Personal
- 2.4GHz Wi-Fi network name and Password is set up

If AE is connected with TC via LAN cable, amber light is blinking with message "Wireless Network" (This Airport base station is set up to join a specific wireless network that can't be found...)
Sorry, I misunderstood what you wanted to do.
Since you did tell us that you had the Express connected with an Ethernet cable, I assumed that was how you wanted to configure the Express.
But I want to extend a wireless network (not using ethernet)
Because Airport Express and Time Capsule cannot be connect via ethernet cable.
Follow the same setup as above....and do not connect an Ethernet cable.
Keep the Express near the Time Capsule for the setup. Once you have a green light, move the Express to a point that is about half way between the Time Capsule and area that needs more wireless coverage.
If you reset the Express several times and try the setup several times without success, I think you have to suspect a defective Express.

Airport Express can find my printer (Lexmark z55) but cant print ?

Hi
At home i use Airport express with lexmark z52 and all work fine ...
At my parants house they got a Airport express with a lexmark z55 and the Airport express can see the printer but when i try to print it says "Problem communicating with the printer" ive tryed to disable firewall but that didnt help.
Ive tryed with a HP deskjet 450 and it works with that one ...i think its the Lexmark driver (i tryed these ones http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:339:0:0&searchLa ng=en&os_group=WinXP&target= )
but no luck ...im running WinXP
So if you got any idea please lemme know
Best Regards
Michael Fog
Ps : I have also tryed the Bonjour program no luck

Ive tryed with a HP deskjet 450 and it works with
that one ...i think its the Lexmark driver
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html

While using the airport express can I listen to music streaming from the Internet?

While using the airport express can I listen to music streaming from the Internet?

The music must be in your iTunes library.
Or, you can try to add a special application like Airfoil that may allow you to stream any audio signal on your computer to the AirPort Express. It might work.
http://www.rogueamoeba.com/airfoil/

DNS Issues, can't set static DNS server

I have an Airport Extreme (which I'll call the router). It has an IPv6 tunnel (to Hurricane Electric), so it hands out IPv4 DHCP and announces an IPv6 network as well. The DNS servers configured on the router are OpenDNS'.
My Apple TV 2 is connected via wired Ethernet to the router. It was using a DHCP address provided by the router, which made the DNS server the same address as the router. I wanted to manually set the DNS to use my ISP's, so that I can make sure the Netflix streaming issue I have is not a DNS issue.
So I changed the Apple TV to a manual address, and set the DNS server to my ISP's DNS server (Apple TV can only have one DNS server? Odd.)
After I save this, the Network page shows the correct manual IP, mask, and router, but the DNS Address is an IPv6 address (one that belongs to my network, but the entire address isn't visible), not the one I set. When I Configure TCP/IP again, and I reach the DNS Address page, the first digit of the existing address is "20", and the rest of the digits are "0". Interesting note as well: if I press Down, the number will increment to 19, and so on, but if I press Up, it changes to 0. Obviously the UI isn't designed for IPv6 addressing, but there's an IPv6 address in there nevertheless.
Screenshots:
http://www.flickr.com/photos/random_robin/5310011344/
http://www.flickr.com/photos/random_robin/5310016288/
I have tried to set the DNS Address multiple times now, and have restarted the Apple TV. The IPv6 DNS Address persists.

After 16 hours of working i don´t have seen this easy solution. I had tried with Internet Explorer and Opera but finaly i have need to use Firefox.
Thanks a lot to solve it.

My airport express can't locate a dns server

Similar Messages

Maybe you are looking for