My Airport Express has a weak signal 50-75 feet from base.  Any solutions?

My AirPort Express has a very weak signal 50-75 feet away from the base.  Any suggestions?

ideas
buy one (or two) of those newer md031 airport extreme base stations as they have a higher power output.
ur post is implying 'join a wireless network' so i dont think limiting to 2.4ghz or 802.11b or 802.11g would help..
using 2.4 or 802.11b would help over distances, if ur creating a network and joining it then thats not an option
the airport has a couple settings like power output (make sure its set to 100%) or multicast rate that might be worth trying out. multicast set to low helps with clients joining at longer distances and multicast set to high kicks off clients at distances
put the aiprort express up high on the wall so it has a better chance of not being obstructed ?? and not on the bottom of the baseboard??

Similar Messages

  • Airport Express has very weak signal even to the next room

    I am wondering why my airport express has a weak signal. The signal to the next room(about 4 or 5 meters away), is so weak that you can only see one or 2 lines from the graphic at the internet connect. My base station has the last firmware from apple. Has anybody else experiencing this problem or knows what could be wrong?
    Mac mini G4 1.25, iMac G5 2.0, MacBook 2.0, iPod 20Gb, iPod nano 4Gb, iPod 30Gb   Mac OS X (10.4.7)  

    I have tried changing channels, I have tried using interference robustness but nothing seems to work. Isn't it so wierd thought that in the same room within 1 meter distance, the signal becomes from strong to weak, to zero?? The funny part also is that when i change channel for a few seconds the signal is very strong until it drops to zero. When i try another wireless device doesn't seem to have this problem but only with airport express base.

  • Will Airport Express boost a weak signal?

    I get wireless coverage everywhere in my home, but in some areas the signal is less strong than others. Will an Airport Express boost the signal so that the 'weak' areas will have the same signal strength as the 'strong' areas?

    If you are 20 feet from the router and only show a couple of "bars", either your router is not performing up to specifications or you have some wireless interference issues at your location.
    An AirPort Express can extend the signal "deeper" but it won't make it stronger. It can only extend what it receives.
    I suggest that you investigate your low signal strength issue before adding an AirPort Express. BTW, I assume that you are aware that the Express can only "extend" a signal from another Apple "n" router. It won't work with the products of other manufacturers for that purpose.

  • AirPort Express has weak signal while playing music from Iphone, intermittent play

    AirPort Express has weak signal while playing music from Iphone, intermittent play

    I'm having the same problem, even more:
    - Watching movies over AppleTV: switches off every 20min (sleep mode).
    - Listening to iTunes music ofer AirPlay: the same.
    - A whole confusion with switching airplay destinations (AppleTV, AirportExpress) over iPhone remote app. Sometimes remote cannot find my library anymore
    - Before, I was able to multitask: stream a DVD to AppleTV, using airplay mirroring, and simultaneously stream music from iTunes on the same computer, over the iTunes airplay selector, to loudspeakers connected to AirportExpress. No longer possible.
    I've grown a big Apple fan in short time, proudly living  what for others is the future (your media stored anyhwere, controlled from anywhere, played anywhere, stop thinking in terms of devices). And, I've learnt to savour the  moments when you can look your Microsoft friends deep in the eyes and say: "The big difference with Apple  - it just works"...
    At the moment, I'm trying not to invite my friends.

  • My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.   My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexp

    My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.
    My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexpected error occurred Try again."
    I'm running Mavericks on a 24-inch 2007 mac, 2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM, OS X 10.9.3 (13D65). The Airport Express is model A1264. I connect to it via an Airport Extreme with 7.6.4.
    Thanks in advance.

    I have the same problem with my airport express – a blinking yellow light and it is not working. I have tried resetting it a few times.
    My airport utility detects it and try to connect. However, after a few moments it says "An unexpected error occurred Try again.
    Airport Express is model A1143
    And I have tried to connect with iPhone - same same.

  • How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

    How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
    What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
    Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

    FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

  • Airport Express has stopped working, no IP-adress

    Airport Express has stopped working. In my Airport tool, I can't see the Airport Express anymore.
    Under network, I can still see the Airport, but it says, that it cant find an IP-Adress.
    It can see my Airport Extreme.
    Thanks in advance.
    Best
    Clintcool1968

    Try resetting the Airport Express.
    If you don't see it in Airport Utility in your Utilities folder, then you would need to reset it...
    Do you have it set to "Join" the Extreme network? or something else?
    See this Apple doc on how to reset your base station.
    http://support.apple.com/kb/HT3728
    Also, you would not see it in your Network preference panel in the System Preferences.
    You will only see the main network which is your Airport Extreme....
    Unless you have 2 separate networks....
    How many do you have?

  • My wifi is not too strong in one room, can I use an Airport Express to boost the signal?

    I have an Airport Base Station but the signal is only one or two bars at one end of my house. Can I use an Airport Express to boost the signal?
    Also the AE I have is an older model and I can't get Mountain Lion to talk to it. How can I get around this?

    Also the AE I have is an older model and I can't get Mountain Lion to talk to it. How can I get around this?
    You might want to look over this article:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

  • I recently bought an Airport Express and connected it to my TimeWarner modem. Am able to surf the internet using my MacBook Air, iPad, and Apple TV, but the AirPort Express has a blinking amber light. How could I change it to a green light?

    I recently bought an Airport Express and connected it to my TimeWarner modem. Am able to surf the internet using my MacBook Air, iPad, and Apple TV, but the AirPort Express has a blinking amber light. How could I change it to a green light?

    The following may help: Wi-Fi base station: Understanding and resolving a blinking amber status light

  • My new Airport express mysteriously dropped all signals, I reset it and only my iMac is now connected to my network. My iPad, iPhone 4S and Roku box will not connect - any solutions to this?

    My new Airport express mysteriously dropped all signals (due to lack of DNS settings ?!?!), I reset it and only my iMac is able to be connected to my network. My iPad 2, iPhone 4S and Roku box will no longer connect. Any solutions to this? Everything was using my netwoek before.

    Did you power down your modem prior to resetting the Express?
    If not, do it now. Leave it connected to your Express while you power it down. Let it rest a moment or two, then power it back up. Once it restarts, determine if all your other devices are able to connect.

  • Why my airport express has a yellow light

    why my airport express has a yellow light (not blinking)

    Before doing a reset try the Airport Utility via Finder > Applications > Utilities ... this might give you a reason for the flashing light.   It could be something simple like the software needs updating.
    https://discussions.apple.com/message/16700100#16700100

  • Can airport express output a digital signal to feed a separate audio DAC?

    Can airport express output a digital signal to feed a separate audio DAC?

    Yes. To access the digital output from the AirPort Express Base Station's (AX) audio port, you will need to connect a mini-TOSlink digital optical cable.

  • Airport Express (not n) with ethernet hub and as wireless base

    Will Airport Express do this?
    I've got a cable modem. It connects by ethernet to a hub. Airport Express (not n) connects to the hub by ethernet. My laptops (MacBook and HP 69xx WinXP Pro) connect to AX and internet just fine.
    In that same hub, I want to connect a D-Link DNS323, which I wish to be made accessible to the wireless network provided by AX. Here's a sort-of diagram:
    cable ethernet
    modem ---> hub <--- Airport Express <--- laptops, AppleTV, etc. by wireless
    ^
    |
    |
    D-Link
    DNS 323
    Can AX (old style, not n version) use its ethernet connector to both communicate with my cable modem and with other wired ethernet devices through my hub?
    Thanks for helping. I tried searching for similar posts, but I failed to find an answer.

    With only the hub, the NAS, and the express, you can't access both the internet and the NAS wirelessly at the same time. Here's why:
    The AirPort Express has only one Ethernet port. That port can either act as a WAN port or a LAN port, but not both at the same time.
    You need the Express to be connected to the internet. Unless you have another wireless router (Apple or otherwise), it will have to be connected through its Ethernet port. Therefore, the Ethernet port must act as a WAN port.
    The NAS, on the other hand, is part of your network. For it to be connected, the port must act as a LAN port.
    This means that the NAS can't be connected to the Express via Ethernet because then the port would need to act both as a LAN port and a WAN port, which it can't do.
    This means you'll need an additional wireless router if you want to access both the internet and the NAS at the same time.
    If you have another wireless router (it doesn't have to be an AirPort), I can help you configure it to work with your current network so that you can access the NAS.
    Message was edited by: adsfushi72

  • I can't get my Airport express to work in client mode with my speedtouch base station?

    Im trying to add my Airport Express to my exisiting wireless network - which runs from a speedtouch base station. I only want to use the AP to use air tunes but i cant seem to get it running in client mode. The interface on the Airport Utility seems different to that described in the online help here: http://support.apple.com/kb/HT1731
    Everytimes i try to add it to an exisint network the AP dissapears on its restart. Any ideas if what im trying to do is possible. I've tried creating the network initially with the ethenet cable connected - which works, but then when its detatched although the AP status light stays green it disapears from from the network and i cant stream.
    thanks for any help and advice.
    Wilkie

    In order for the AirPort Express to join another wireless network as a "client", three conditions must be met in the setup of the Express. It must be provided with......
    1) The name of the wireless network that is to be joined
    2) The exact type of wireless security settings that the wireless router is using
    3) The wireless network password
    Most users have no trouble with 1) and 3), but few know the exact type of wireless security settings that their wireless network is using. So, they accept a default setting on the Express, which does not match up with their network.
    Bottom line....unless you know the exact type of wireless security settings that your wireless router is using...the Express will never join the network. The setup ends with an error message and you have to start all over again with another try....which will fail as well, etc.
    If you know the exact type of security settings that the Speedtouch router is using.....we can provide you with a step by step setup guide.
    If you do not know this, or are unsure....you will need to get into the setup menus for the Speedtouch router to locate the wireless settings. Or, if the wireless router was provided by your ISP, they may be able you with this information.
    Post back with that info and we will proceed.

  • I have just bought Airport Express and now my Skype is slow.  Is there a solution to this - everything else is ok

    I have just bought Airport Express and now my skype is slow.  Is there a solution to this - everything else seems to be working fine

    Parrotcat wrote:
    I have just updated to Lion and now my folders no longer show number of items on the bottom...    
    In the good old days of Snow Leopard, an open Finder folder had a border along the bottom of the window which could show the number of items in that window and the total available space on the hard disk or partition that folder resides on. That bottom border is gone in Lion and those two bits of information are gone with it. Is that what you're talking about? If so, I'd like to learn how to get it back too and "Show Item Info" is not the way.

Maybe you are looking for