My airport express has stopped working as an extender.

Aloha:
I have been successfully using my my airport Express as an extender for several months when it just quit working.  I now have plugged it in right next to my computer and airport Extreme to trouble shoot.
It just sits there blinking orange.  I have pushed the reset button to no avail.  I have unplugged it, pushed and held reset while plugging it in, still  it flashes yellow.
Any good ideas?
Thanks
Dan Page
Hawaii

When you performed the reset, you returned the Express back to its original new, out of box settings. So, you have to reconfigure it again to with settings for your network. You will not see a green light until you complete this process.
Temporarily, connect a spare Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the AirPort Express
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Base Station tab below the row of icons and assign a name to the Express, a device password and adjust Time Zone settings
Click the Wireless tab and adjust settings to look like this:
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the AirPort Extreme wireless network
Enter a check mark next to "Allow wireless clients"
Wireless Security = WPA/WPA2 Personal
Wireless Password = Same password as the AirPort Extreme wirelesss network
Confirm Password
Click Update at the lower right
As soon as you see the message that the settings have been stored successfully, close AirPort Utility and disconnect the Ethernet cable
Wait 40-45 seconds for a green light. Now you can move the Express back to the desired location and plug it back in

Similar Messages

  • Airport Express has stopped working, no IP-adress

    Airport Express has stopped working. In my Airport tool, I can't see the Airport Express anymore.
    Under network, I can still see the Airport, but it says, that it cant find an IP-Adress.
    It can see my Airport Extreme.
    Thanks in advance.
    Best
    Clintcool1968

    Try resetting the Airport Express.
    If you don't see it in Airport Utility in your Utilities folder, then you would need to reset it...
    Do you have it set to "Join" the Extreme network? or something else?
    See this Apple doc on how to reset your base station.
    http://support.apple.com/kb/HT3728
    Also, you would not see it in your Network preference panel in the System Preferences.
    You will only see the main network which is your Airport Extreme....
    Unless you have 2 separate networks....
    How many do you have?

  • Airport express has stopped working when college switched network to 'N'

    Hi all,
    My university has just switched their wireless to 'N'-band. My airport express ('G') is now upset: not only has airtunes stopped working (I previously had joined it to the dorm wireless network), but I can no longer even access my airport in the Airport Utility (5.3.2).
    I've done a hard reset of my airport express and I still cannot access the device via the airport utility. When I click 'rescan', the device is never found.
    I have noticed, however, the default network "Apple Network 600eab' appearing among my wireless network choices. Unfortunately, Airport never actually lets me join that network.
    Does anyone have any ideas I can try?
    Thanks
    LD

    I've had to go back to firmware 7.4.1 and that seems to work.  Anyone know what is up with 7.5.2?

  • Airport Express has stopped working

    Hi.
    My AE has just stopped working and now can't connect to the network.  I have tried a harware reset and all I get is the amber light and now and again it flashes then turns green and then back to amber.  It looks to me as if the something has damaged the hardware as I cant get it to showup in my airport utility.
    Regards
    Amidabrian

    If you have tried a Factory Default Reset a few times, and the AirPort Express is still acting up, it is likely defective and will need to be replaced.
    Resetting an AirPort Base Station or Time Capsule FAQ
    If it is out of warranty......and you have the patience.....and want to take a real longshot......carefully saw open the case of the Express along the center seam to open up the device and look for something obvious....like a connector that has come loose, broken wire, etc.

  • Hi for some reason my Airport Express has stopped working. It just glows Amber and occasionally flashes green but goes back to amber. AU can't see it. I have a macbook and want to connect via my existing wifi to stream music, can someone help please!

    Hi, title says it all. I have been doing this for years and don't know what has changed.....
    Reset doesn't seem to work, this includes factory! Please help.

    It certainly would not hurt to let the folks at the Apple store take a look to verify things. If the product is less than a year old, or you have AppleCare on one of your Mac, the Express may qualify for free replacement.
    The Apple Store may also some some refurbished Express devices on hand at a discount if you need to buy, or they can direct you to the Apple online store for the same thing.

  • My airport express has stopped working when set to 802.11 b/g

    All of a sudden I have basically no signal when my Airport Extreme is set to 802.11n (802.11 b/g compatible).  It works fine at 802.11a compatible, but the Playstation 3 needs the g network.

    I've had to go back to firmware 7.4.1 and that seems to work.  Anyone know what is up with 7.5.2?

  • My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Ha

    My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
    Has anyone had that happen? Solution? (other than purchase a new one.......)

    My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
    Has anyone had that happen? Solution? (other than purchase a new one.......)

  • Airport Express REALLY stopped working

    My Airport Express has really stopped working: dead as a dodo, defunct, etc. It doesn't show in Airport Admin Utility or in iTunes, and the front light is also dead. I have tried changing the easy-access fuse but it makes no difference.
    I assume it has rather annoyingly just died, but why or how I do not know. Is there anything else I can try or do? Is it worth having it repaired, given the relatively low cost?

    Apple has already killed the main thread about this topic months ago, and have left isolated thread to develop a bit before sometimes deleting them: http://www.hardmac.com/news/2006-08-25/#5851
    anyway, our curretn investigations show that APX with serial starting with HS4xx or HS5xx or even HS6xx are mostly affected by the sudden death syndroma.
    other APX series manufacture with a serial starting with 6F are much much less prone to die after the end of the warranty.
    Please record your defective APX via the following link:
    http://www.macbidouille.com/apxdefect.php
    and visit hardmac forum to follow the story: http://forum.hardmac.com

  • Airport Express Basestation stopped working.

    This is really just a last chance before I return the thing.
    I've been using an airport express basestaion for the last year. This evening I was connected to the internet and it just stopped and the green light went out.
    Seems like a major hardware fault. I've tried the fuse (in the plug). Tried it in a different socket. Tried the reset button. I've given it a while and tried again still nothing.
    Is there anything else anyone would recommend before I return it?
    I assume the year warranty extends to things like this.
    Ta
    iMac G5, iBook   Mac OS X (10.4.4)  

    Many airport express born stopped 1 year after constant use. I had this problem after 11 and a half month of use. It was out with no green light. Apple accepted to change it. But in France many people seem to have the same problem 12 or 13 month after use. You can see this above and on www.macbidouille.com (keyword : "airport express").
    One year and not more. Is it true ?
    - Attention, cette borne Airport Express se détruira à la fin de la garantie ! - Lionel - 06:20:58 - Réactions
    De nombreux lecteurs ont eu la malchance de voir leur borne Airport Express cesser de fonctionner peu de temps après la garantie. Ce nombre de cas, au moins 10 dont les mésaventures sont relatées sur nos Forums est suffisamment élevé pour nous prouver que ce problème n'a rien d'isolé, d'autant plus que les symptômes sont toujours identiques. D'un moment à l'autre, la borne refuse tout simplement de s'allumer, ce qui semble mettre en cause une fragilité de son bloc transformateur. Voici une photo prise par Dieru qui a (assez sauvagement) ouvert sa borne en panne et hors garantie.
    Si vous aussi avez des problèmes similaires avec une Airport Express, merci d'apporter votre témoignage. Il nous sera ainsi éventuellement possible de cerner une série défectueuse.
    Le problème Airport Express, suite - Lionel - 05:46:33 - Réactions
    Depuis hier, et la publication de la brève, nous avons reçu de partout dans le monde de très nombreux témoignages qui rapportent tous la même histoire.
    D'un instant à l'autre, et sans la moindre intervention extérieure, la borne Airport Express s'éteint pour ne plus jamais se rallumer.
    Une première étude des numéros de séries ne nous permet pas d'y trouver un quelconque signe de série défectueuse.
    Si le problème se produit de temps à autre durant la garantie, il a la fâcheuse tendance à arriver au treizième mois d'usage de la borne.
    Il faut dire que de tous les produits Apple, une borne Airport est probablement le produit que l'on songe le moins à débrancher, même si l'on s'absente. C'est probablement l'explication de cette incroyable constance dans la durée de vie avant la panne.
    Un de nos lecteurs a réussi à faire repartir sa borne en l'ouvrant et en changeant le fusible. Merci à Dieru d'avoir pris cette photo.
    Ce fusible est un 500mA 250V. Il se trouve sous l'adhésif, ici jaune mais qui peut-être aussi de couleur bleue. Attention, si vous le changez, pensez à en mettre un ayant des caractéristiques identiques. Lors de la remise sous tension de la borne, soyez-en éloigné pour éviter tout risque de brûlure.
    D'autres ont essayé de le changer sans que la borne reparte.
    Notez encore que quelqu'un a réussi à la faire repartir en la faisant fonctionner avec des piles
    Donc tout concorde pour incriminer l'alimentation de la borne.
    Faudra t-il attendre une class action pour qu'Apple accepte d'en étendre la garantie ?
    - Et les bornes Airport Express continuent de griller - Lionel - 06:21:03 - Réactions
    Depuis la dernière fois où nous avons communiqué sur le problème affectant de trop nombreuses bornes Airport Express, nous avons reçu d'autres témoignages.
    Ils continuent à concorder avec les précédents, puisque les pannes surviennent le plus souvent au treizième ou quatorzième mois d'usage, avec une surprenante régularité.
    Apple refuse encore pour le moment une prise en charge sous garantie de ces bornes.
    - Bornes Airport Express, suite - Lionel - 07:21:10 - Réactions
    Un des membres des forums, fpoil, nous adonné sa borne Airport Express en panne. Nous sommes en train de voir ce qui peut clocher à l'intérieur.
    Il est visiblement impossible de la démonter proprement sans endommager plus ou moins la coque qui est très fortement collée/soudée.
    Si Apple décide de procéder un jour à une extension de garantie avec échange, ce dernier sera très coûteux, et la récupération d'une partie de l'électronique problématique et probablement peu viable d'un point de vue économique.
    Nous en profitons pour passer un nouvel appel à témoins.
    Est-ce que certains d'entre vous ont eu ce fameux problème de panne dans un pays où la tension électrique est de 110V ?
    En effet, après un bref récapitulatif, il nous semble que tous les cas de bornes en panne le soient dans des pays où la tension est de 220V. Ce pourrait être le début d'une piste.
    - Bornes Airport Express, un point sur le problème - Lionel - 05:45:57 - Réactions
    Comme promis, nous vous tenons au courant du problème rencontré sur des bornes Airport Express de plus de 1 an.
    Pour commencer, nous continuons à recevoir quotidiennement des témoignages de personnes dont la borne refuse d'un moment à l'autre tout service. Les symptômes sont toujours identiques à ceux que nous vous avons rapportés.
    Depuis notre appel à témoins, nous avons constaté qu'à quelques exceptions près, les pannes se produisent dans des pays utilisant des tensions de 220 ou 240V. Il est donc presque certain que ce problème soit lié à cette tension, tout comme celui rencontré sur les premiers iMac G5.
    Nous continuons notre recueil de témoignages et nos investigations

  • Liquify tool has stopped working in CS6 Extended after Windows 8.1 upgrade

    My liquify tool in CS^ Extended has stopped working after upgrading my operating system to Windows 8.1. It was fin in Windows 8.0. Suggestions on how to fix this please.

    This is not a proper solution (as it would cost you the GPU dependent features like Rotate View Tool etc.) but it does indicate that you may have to update your GPU driver from the GPU maker’s site.

  • Why has my audio from Apple TV to Airport Express suddenly stopped working?

    Hi.
    For over a year, I have had my Apple TV and Airport Express connected together and the audio worked perfectly fine. All of a sudden the audio playback on movies and Netflix had dropped off considerably. I now have to turn my amp upto 70 to get even the slightest sound. Music plays fine to the AE but not Movie Audio.
    Anyone else having the same issue??
    I'm confused because it's worked ok for a year!!
    Any help please??

    try restarting all of them

  • My airport express suddenly stopped working.

    I have had an airport express unit that I purchased new from Apple about a year ago. The warranty is now expired and it has suddenly stopped working. It shined its amber light for more than an hour, and when I unplugged it to see if it would work somewhere else, it flashed its amber light and then went blank. It will now display no lights at all when it is plugged in, and my computer can not detect it, so it is obviously dead. Has anybody had any experience with this issue? I tried a hard reset (back when the amber light still worked, yesterday), but I do not know if it worked since the unit would not stay on for more than a few seconds (now not at all).
    Other specifications: It has been used pretty much non-stop since its purchase a year ago as an extender for my Time Capsule's network. It served its purpose, although it seemed to lose connection fairly often. Nothing it didn't fix on its own though.
    Well, that's my rant. Thanks in advance!

    Unless you want to carefully saw open the case along the center seam with a fine toothed hacksaw or similar tool to open up the AirPort Express and look for something obvious....like a connector that has come loose or broken wire, it is time to replace the AirPort Express.
    Your chances of success are very small if you want to try the repair route, so do this for the fun of it more than hoping that it will work.
    Even if repairs were possible, a regular shop would likely charge you more than the cost of a new Express.

  • Express has stopped working with 2Wire WiFi router

    I have AT&T U-verse service and used the supplied 2Wire router as the WiFi hub. Because of the other devices in our home, I have to keep the security setting on the network on "WPA-PSK (TKIP) and WPA2-PSK (AES)". Otherwise the devices can't connect.
    I have always used an Airport Express joined to the network to attach a USB printer and stream music to a stereo receiver. It has always worked, though it would occasionally mysteriously need to be reset and set up again to work with the network.
    Last week the Express stopped working again. This time it will not rejoin the network. After many tries, I have determined that the Express is not broken. It will connect with the network if I turn security off and if I set security on the network and the AX both to "WPA2-PSK (AES)" but if I keep the security setting on ""WPA-PSK (TKIP) and WPA2-PSK (AES)" on the network  it won't connect -- it accepts the settings then flashes amber, stops showing up on Airport Utility at all and has to be reset again. This occurs whether I set choose "WPA/WPA2 PERSONAL" or "WPA PERSONAL" with Airport Utility
    As it happens, an AT&T technician was out here today and he told me that AT&T sends updates to its gear, which might explain why the AX gets knocked off the network from time to time. Still, that doesn't explain why I could always fix it before and can't fix it now.
    Any thoughts on a possible solution?

    Follow-up: I gave up and attached an old Airport Extreme base station to the 2Wire router and turned off the wireless on the 2Wire. Sort of a waste, since I need an extra device to do what the 2Wire used to do alone, but everything works again.

  • Airport Express suddenly stops working

    Hi,
    Wondering if people have had this problem and if they resolved it.
    My Airport Express is used as my main wireless router, and there are 4 computers in this network. Often times my AE just stops working, I can't see it in wireless network list, it just disappears. It still has a green light, no flashing. I have to unplug the thing, wait a couple of seconds and then replug it. Then it'll work just fine 'till the next time it disappears on me.
    I wonder what's going on...
    Thanks

    Many folks are having similar problems, even when the AX is only being used to run iTunes through a home stereo. That's my situation: my old PB running OS 10.4.11 is working fine running iTunes through the AX but my newer MPG running OS 10.5.5 doesn't see the AX at all. This seems to have happened when I upgraded to iTunes 8 (which required an AX firmware update). Seems to me that there is a conflict of some sort.....which Apple has not yet deigned to fix.
    As an aside, the cynical side of me wouldn't be surprised if its a kink somewhere in Apple's latest DRM efforts, but that's just the cynical side of me. The non cycical side of me thinks that this is the type of bug that seems to be quite common in new Mac OS rollouts -- despite what the Apple commercials might suggest.

  • Airport express suddenly stopped working

    My dad updates something on his system and suddenly my wifi, which had been working not 5 min prior to this, suddenly stops.  Now, no matter where in the house we plug it it, the airport express keeps blinking a yellow light.  It just stopped working.  Any ideas?

    It's always a good idea to completely power cycle the entire network after any changes or updates to a network.
    If  you have not already done so.......
    Power off everything....all devices....order is not important
    Start the modem first and let it run for a minute or two by itself
    Start the next device connected to the modem the same way
    Start the Airport Express the same way
    Start each computer and device one at a time about a minute apart
    Check the network for proper operation

Maybe you are looking for

  • Sampling procedure-Square root n+1

    Hi All, I need to calculate the sample size based on the Containers & Square  root n+1. How to configure the system & how to maintain the master data to get the sample size. User also insisted only the sample size has to be calculated, but he will en

  • How to use TLS encryption with cfldap 6.1?

    I need to connect to a remote ldap server using TLS encryption on port 389 and cant find any help on how to do this in coldfusion 6.1 . Any pointers would be welcome.

  • A505-S6965 HD True Brite LED screen cracked

    , what sattilite screens will interchange for used replacement? All A505?

  • Cannot load mod_uio.so module

    Hi I am trying to set up OAAM Proxy using Apache server 2.2 in windows env. After copying the mod_uio.so file to modules folder under Apache Home, I edited httpd.conf file and added the module as LoadModule uio_module modules/mod_uio.so UioProxySetti

  • 10.8.4 update is it worthy?

    Hi, is it worthy to make this upgrade? Apparently it has many glitches. I tried to install it doing software upgrade but it keeps telling me for a reboot and it stills shows version 10.8.3. My mac is 3 days new and I really dont want to screw it just