My AirPort Extreme can not see my SMC router

I have a new MacBook Pro. It can see other routers (in my neighborhood) and connect to the internet by ethernet cable into my SMC router but it can not see the SMC router wirlessly. I have no security on my router right now. Any ideas?

I have the exact same problem: SMC Barricade G 2408WBRP-G-CA with v2.08 firmware. Because there's lots of talk of problems with WEP, turned that off, but no luck, the built-in airport card of the powerbook won't connect to the router.
I have successfully connected to a Cisco access point at work with 128-bit WEP with no problem at all, so I'm certain the hardware in the machine is functioning... just not with this access point.
This is a brand new 17" Core 2 Duo Macbook Pro that I just received... all available software updates applied.
Macbook Pro Core 2 Duo 17" Mac OS X (10.4.8)

Similar Messages

Airport extreme can not be recognized?, Airport extreme can not be recognized?, Airport extreme can not be recognized?

My Airport Extreme Station (4th Generation) is all of a sudden not recogized by the Airport Utility Software. I rebooted the Airport Extreme device a few times, disconnected it completely, and did it set it back to the factory default setting. No recognition. I tried configurating it with all my devices; IPhone 4S, IPad, MacBookPro and new iMac. Always the same message, even though I have internet access through the Airport default Wifi-ID. So the the Airport device works properly. Just no access for configuration, Does anyone has an advice to get back into the Airport Set-up through the Airport Utility program? Thank you.

Hello loving-truth,
I understand that your Airport Extreme is not being recognized in AirPort Utility, however you are able to access the internet via the Wi-Fi signal. We can give the steps in the following article a shot:
AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
http://support.apple.com/kb/TS4597
Thanks,
Matt M.

HT204057 I have the latest airport extreme. can not access the files.

I have previously time machine backups for two macbook pros on same drive.
However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme.
What am I doing wrong?

You can't access a Time Machine backup that way. Connect the drive directly, hold down the option key, and select Browse Other Backup Disks from the Time Machine menu.

Airport extreme can't see any wireless networks.

Hi, I have an iMac that has always used an ethernet connection to the internet, but now I want to connect wirelessly. But it doesn't seem to "see" any networks, mine or otherwise, which work fine on my other apple devices. Does the fact that my wireless card was purchased (as was the imac itself) overseas make it incompatible with US wireless networks? Or is the card broken and I have to take the computer in for repair? Or is there some way I can resolve it myself?
Here is what my Airport card info says:
AirPort Card Information:
Wireless Card Type:          AirPort Extreme (0x14E4, 0x88)
Wireless Card Locale:          Asia Pacific
Wireless Card Firmware Version:          Broadcom BCM43xx 1.0 (5.10.91.22)
Current Wireless Network:          wireless network not available

Yes, it does. Still doesn't "see" any networks. If I need a new airport card, is this something I can do myself or does it have to be done at an apple repair shop?

AirPort Extreme does not see printer, hard drive, AirPort Express!

I just got an AirPort Extreme (802.11n), to replace my AirPort Express. I have a Brother 665CW wireless all-in-one printer, which had worked perfectly but now I cannot find it. I have also hooked my USB hard drive into the Extreme. I can see the hard drive in the AirPort Utility, but I don't know how to find it from my iBook. I'd also like to put the Express in another room to use the AirTunes feature. Unfortunately, almost nothing is working!
Here is how it's set up:
Den:
AirPort Extreme - hardwired to:
- DSL modem
- hard drive (via USB)
Brother 665CW (wireless)
Living Room:
AirPort Express
Advice would be appreciated. I'm usually able to troubleshoot my problems, but documentation on this Extreme is really bad! Thanks!
iBook G4 Mac OS X (10.4.9)

I had problems adding Airport expresses using Airport Utility. However I found it worked fine if I used the manual set-up option and not the Assist me option.
Reset the airport express then, in manual set-up, set the express to 'join an airport network' add the airport network password and see if that works

My Airport Extreme Can't See My USB Disk

Hi. I have a new airport extreme out of the box, factory fresh. I plugged in my USB hard drive and cannot see it displayed in the Airport Utility under Disks. I have tried different hard drives, different cables, rebooted the airport, restored it to default settings but still no joy.
The first disk I tried was a factory fresh Buffalo formatted to NTFS. Then I tried my USB disk that was the Time Machine backup on my old Mac that I had connected via a USB cable. Neither can be seen.
At my wits end....
Thanks for any help

The drive must be formatted in Mac OS Extended (Journaled) or FAT32 to be recognized at the USB port of the AirPort Extreme.
The USB port on the AirPort Extreme is underpowered. For that reason, it is often necessary to use a powered USB hub with a hard drive......even if the hard drive has its own power supply.
If the drive is formatted correctly, and you have a powered USB hub, and the drive will still not appear in AirPort Utility, then it is time to take the AirPort Extreme to an Apple Store or service to have the USB port checked out.
See this discussion for more information and tips:
https://discussions.apple.com/message/20499058#20499058

Airport Extreme, can't see usb disk from media player

I have a WD hard drive (formatted in FAT32) connected to my Airport Extreme. I can access it from my MacBook and I can see it under disks in Airport Utility. When I try to access the drive wirelessly from my Merlin media player (that's connected to my TV), the drive doesn't show up under the Airport Extreme Workgroup. I should mention that when the drive is plugged into my MacBook, I CAN access the drive on my media player under my MacBook's Workgroup. So I'm assuming the issue is with the Airport allowing the drive to be seen, and not the format of the drive itself. Can anyone help?

By default, when you enable "File Sharing" in the AirPort Utility, your AirPort Extreme will share out an attached USB HDD with either Macs or PCs.
To access the shared HDD from a Windows 7 PC:
Start > Computer > Map network drive
Drive: <use default or select a drive letter>
Folder: \\<AirPort's Base Station Name or IP Address>\<HDD's Volume Name>
User name: <Enter Base Station Administrator name>
Password: <Enter Base Station Administrator password>

IBook G4 Airport Extreme does not see any SSID

Hi,
My iBook 1,2 Ghz has been working great for several years now.
I am working with Mac OS X Tiger (10.4.11) for quite some time
and it never let me down. I connect to the internet using an Airport Express
connected to a speedtouch router.
The Airport Express Card in my iBook always found 6 or 7 SSID's of other
Wireless Networks in my neighbourhood and it used to login automatically on
my Airport Express wireless wetwork station.
Last week it suddenly stopped working correctly.
After starting OS X on my laptop the little Airport icon in the upper bar faded out grey.
When I click it it says it can't find any networks.
I checked all my settings, downgraded my Airport Extensions
and even installed a spare (refurbished) Airport Extreme Card.
Even with another Airport Extreme Card it does not see any wireless networks.
My other macs, a unibody MacBook Pro and white MacBook work fine with the Airport Express.
What could be wrong? Am I overlooking something here? Can somebody help me out?
How can i get my Airport Express/iBook G4 connected to my wireless network again?

Hi Elko,
Thanks for the reply.
I re-installed the original Airport Extreme card into the slot again.
But now i pushed it harder than the first time. (just like you said)
I noticed the second click, but that doesn't seem to be the problem.
Both Airport Cards (the original and the new) were installed correctly.
I also checked the antenna connection but that is seated o.k. too.
After re-installing the card, i booted into Mac OS X Tiger and checked the ASP.
It says a Airport Extreme Card is installed with firmware version 405.1 (3.90.34.0.p.18)
and the langauge version is international/worldwide. So far, so good.
Nevertheless the airport card does still not find any wireless networks or SSID's after
scanning multiple times. (Location on automatic)
I am planning an upgrade to Leopard today. Maybe that's gonna help, since there were some Airport Extreme updates in Leopard. If that's not the solution, I will stay with your other suggestion and buy me a nice USB dongle.
Do you have any idea what type of dongles work best with Leopard? I have seen some different models, but a lot of dongles require third-party software to make it work and are not automatically recognized by OS X.

AirPort Extreme Does Not See USB Drive

I've had no luck getting my AirPort Extreme (802.11n) to see a USB hard drive. Using a WD MyBook, there's simply no response from the AirPort. Is there some trick to getting the AirPort to see the drive? Clearly this product isn't working as described! There's no mention in any of the marketing materials of needing to do anything but plug in the drive to the USB port.

This whole 'mount USB drive' feature appears to be VERY problematic. I cannot get the drive attached to my Airport Extreme to be visible to the iBook which runs its net connection thru the AE unit.
Has anyone submitted a bug to developer.apple.com?
If you have not - it is possible to acquire a free developer's account - just fill out the forms - and then you can add your voice to the chorus of bugs posted - which is WAY more likely to get attention by Apple engineers than just posting on this forum.
If anyone has any news about how to systematically solve this problem, please let me know.
Thanks!
Lance Drake
G5 DP 2GHz Mac OS X (10.4.8) G4 iBook Airport Extreme Iomega USB 160GB drive

My new airport extreme does not see the hard drive

I have a new airport extreme with a hard drive connected to the USB port but the airport can't see the disk. I verified the firmware and is 7.7.1
http://support.apple.com/kb/DL1665
Disk was working good but after Mavericks, the problem start.
Any suggestion?

I had problems adding Airport expresses using Airport Utility. However I found it worked fine if I used the manual set-up option and not the Assist me option.
Reset the airport express then, in manual set-up, set the express to 'join an airport network' add the airport network password and see if that works

Airport card can not see network.

I have recently moved. I had no issues with the my network on my G5. We moved, I bought an Airport Extreme and set it up through Qwest DSL. My G4 laptop, my iphone, my roommates G4 laptop and his dell laptop all successfully see and login into our network just fine. However my G5 doesn't see any network available. Like I said, in our old spot, everything was fine. Any Suggestions? Thanks in advance.
Wireless Card Type: AirPort Extreme
Wireless Card Locale: USA
Wireless Card Firmware Version: 405.1 (3.90.34.0.p18)
Current Wireless Network: wireless network not available

I've been experiencing similar difficulties with connecting to my wireless router and dropping signal connections.
It almost seems to be in the same vein as SCSI voodoo. One day it works and another it doesn't.
One thing that seems to reduce the problems is to use only WEP protocol. I have rarely been able to connect using any of the stronger schemes, although my wife and daughter using pro laptops have few problems with connections.
My G5 does not have an external antenna, which I suspect is part of the problem.
Mike

Airport Utility can not see my 2 airport express.

It does see my airport extreme but it has stopped seeing the 2 express stations. I have had this set up for years and play iTunes to stereo systems in 2 different rooms in the house. But it just crashed and lost the connections to all three base stations. I have been able to reset the Airport Extreme but Airport utility now will not find the 2 Airport Express units that I have. These units are 802.11g capatible.

I have been able to reset the Airport Extreme but Airport utility now will not find the 2 Airport Express units that I have.
Suggest that you perform a Factory Default Reset on each AirPort Express (AX) and then reconfigure them to "join" the wireless network that is being provided by the AirPort Extreme.
Power down the AX for a moment
Hold in the reset button and keep holding the reset button in while you plug the AX back in to power
Release the reset button 8-10 seconds after you plug the AX in to power
Allow 40-45 seconds for the AX to restart back to a slow, blinking amber light
At this point, the AX is providing a wireless signal with a name like Apple Network xxxxxx. You must log on and connect to this network (no password is required) first, then open AirPort Utility, select the AX and click Continue to follow the guided setup.
You also have the option of configuring using Ethernet by temporarily connecting an Ethernet cable from your PC to the AirPort Express if you do not want to configure it using wireless.

AirPort Extreme does not see HP Printer Officejet Pro L7555

I have tried to research how configure AirPort Extreme with my HP Officejet Pro L7555 by USB or ethernet cable. After following instuctions, printer is not shown. HP site that Apple links me to says it works by usb. Apple is ambiguous as to if it must be airprint capable. Thought maybe I need to set it up in the address category. Can I get a definitive answer on the compatibility of this? The latest drivers etc.. have been installed. Any help much appreciated.

The HP Officejet Pro L7555 have three interface options:
USB
Ethernet
Bluetooth via an optional Bluetooth wireless adapter.
The USB port on the AirPort Extreme supports ONLY basic printer functions of a multifunction printer like your L7555. That means, you will not be able to access the printer's fax, scan, or copying function connected to this port. To gain access to all of the printer's functions you would need to have to connect it by Ethernet.
Once connected by Ethernet, the printer, not the AirPort Extreme, provides the print server function. Regardless, be sure to use the very latest print drivers for your Mac or PC.
HP provides a support article specifically for this printer when used with Mac here.

New Airport Extreme - can't see old Airport Express

I've succesfully installed my new airport extreme but the old airport express is not visible anywhere. What is the procedure to connect it to the network?

Do a factory reset. Unplug the Express, take a paper clip or ball point pen, depress the reset button and hold it in while you plug your Express back into a power outlet. The light will blink green a couple of times and then blink amber rapidly. When the amber light stop blinking and stays solid, you can release the reset button. Give it s a few minutes to recycle. Then open Airport Utility (I assume when you say that you installed your new Extreme you mean the 802.11n. If you mean the Extreme g, use Airport Setup Assistant. Once it opens it should scan and your Express will show up with its factory ID. You can use the Utility to set it up.

Which epson wireless printer will work with airport extreme (can not find out from epson)

three systems in use Win 7, Mac lion and vista. Former epson printer WF 600 would not link with my new airport extreme router despite multiple attempts through epson. Does anyone know of a wireless printer that will work? Thanks.

I had the same problem. It was fixed by running the silly app downloadable from their support page: http://support.lexmark.com/perl/support/support.cgi?ccs=229:1:0:0:0:0
Here's another way, through CUPS:
1) http://127.0.0.1:631/
2) Administration tab
3) Add Printer
4) Give Name, Location, and Description (pretty inconsequential)
5) Select device: Internet Printing Protocol (http)
6) Device URL: lexnet3://192.168.5.110:1 (the parts in bold must be there, the ip add is probably different)
7) Make: Lexmark
8) Model: 3600-4600 series (if this isn't there, you need to get the driver from Lexmark)
That should do it.
The printer will be in your system preferences.
The port number and the "lexnet3://" is the interesting part. Without them, I don't think you'll be able to get it working.
Good luck
Message was edited by: swbooth

My AirPort Extreme can not see my SMC router

Similar Messages

Maybe you are looking for