My airport extreme only will connect with computer or ipad not both

my airport extreme only will connect with computer or ipad not both

We need just a bit more information, please before we can begin to accurately troubleshoot this issue.
1) What is the make and model number of your modem?
2) What operating system are you using on the MacBook Pro at this time. Your tagline indicates that you are using OS X (10.4.8), but this is about 6-7 years out of date.
If you are no sure which operating system your Mac is using......click the Apple icon in the upper left corner of the screen, then click About This Mac. Post back with the OS X Version number that you see there.

Similar Messages

HT1218 first generation airport extreme won't connect with my iPad2

I have an 'old skool' airport extreme and I can't get it to connect to my ipad2. I get the following message: "The airprort extreme named 'Apple Network ____'cannot be set up by this software. Go to apple.com/support/airport". Any ideas on what I need to do??? My computer recognizes the AirPort Extreme as well as my 1st generation iPad... Any help would be appreciated:)

atotheb, Welcome to the discussion area!
Did you power off the cable modem when switching the Ethernet connection from laptop to AirPort Extreme base station (AEBS)? This is usually required.

Make AirPort Extreme share internet connection with Time Capsule

Hello,
This is the situation: in one room there's an old Mac, the modem which delivers the internet and the AirPort Extreme which is connected to the modem.
In another room there's the Mac Pro, the Time Capsule which is connected to the Mac Pro with an ethernet cable and to a printer via USB.
I want the AirPort Extreme to wirelessly share it's internet connection with the Time Capsule so that the Time Capsule can share the printer with all three Macs (old Mac, Mac Pro and Macbook Pro), the Mac Pro can use the Time Capsule for Time Machine functionality and maybe the Macbook Pro too.
And just using the Time Capsule for internet.
How can I do this?
At the moment the AirPort Extreme is disconnected and the Time Capsule is used instead, but this way I can't share the printer...
Thanks!

Is that AirPort Extreme "flat" or dome-shaped? If it's flat (802.11n-capable), you should be able to configure the "main" router to "Allow this network to be extended" and the other to "Join a wireless network". If the Extreme is dome-shaped, then you need a more-complicated "WDS" arrangement. In either case it shouldn't matter much which router plays which role.
I'm not sure what you mean by "And just using the Time Capsule for internet."
Nathan-NL wrote:
At the moment the AirPort Extreme is disconnected and the Time Capsule is used instead, but this way I can't share the printer...
Is the printer connected to the USB port of the Time Capsule? Can you see the printer in the "Printer" panel of AirPort Utility? What happens when you try to use it from one of the Macs?

Airport Extreme won't connect with my cable modem (Time Warner)

OK, I'm tired of staring at a blinking amber light. I'm reaching out to anyone out there who's had this problem. I've got everything connected right, the software loaded, the connections set on my laptop (Macbok Pro). But still my Airport Extreme won't connect to the Internet. I've tried different cables, rebooting both my modem and my Airport. For the record, I've had a Mac IT guy from my advertising agency come by my house and make sure that everything's installed and hooked up right. But it still keeps saying that my IP address is invalid, even though I can connect (wired) using the modem.
I suspect I'll just have to take it to the Genius Bar or something. But anybody got any ideas? I really want to join the 'n' generation....
-neil

atotheb, Welcome to the discussion area!
Did you power off the cable modem when switching the Ethernet connection from laptop to AirPort Extreme base station (AEBS)? This is usually required.

Airport Extreme intermittently loses connection with Internet?

I have an Airport Extreme connected to a router that is connected to our cable modem. Internet connection is fine, but the Airport Extreme will intermittently lose connection with the Internet and shows a solid amber light. Turning the Airport Extreme off and then on again will resolve the issue, however, this happens about once per week (at different days/times) and would like to ensure a consistent connection even when I'm not at home. (We are thinking of installing a lighting control system that depends upon a consistent wireless connection to work properly, even when we aren't home to restart the Airport Extreme). Please advise on what the trouble might be and how we can get a permanent resolution to the issue.

Is your Extreme an 802.11g (domed-shape) or 802.11n (squarish) model? Do you have the Extreme connected to the other router by Ethernet? Finally, is the Extreme configured as a bridge, i.e., Connection Sharing = Off (Bridge Mode)?

Has anyone had issues with the airport extreme 802.11 connecting with a linksys SPA941 phone?

Got the new AirPort Extreme. Trying to connect my Linksys SPA941 phone to it. Mute button flashes so call receiver cannot hear me. Tested wires..All good. Changed modem..All good. Had same issue with Linksys router EA4500 i just traded in. Hoped to fix the issue with Airport. Same issue is occuring.

One more thing. I was using the Linksys WRT54G2 router before. Did not have any issues. It was going bad on me.

Airport extreme losing wireless connection with Time Capsule

I have a 1st gen Time Capsule acting as my home wireless network base station which is configured to allow the wireless network to be extended. It is also the sole DHCP server. I have a 4th gen Airport Extreme in Extend a Wireless network mode. Everything was running ok for several months. However, since I upgraded both devices to Version 7.6, the Airport extreme keeps losing its connection with the network every few hours, requiring a daily reboot. Since the problem occured, I have disabled MAC address Access Control on the Time Capsule, and allocated a reserved DHCP IP address for the Airport Extreme - but this has not solved the problem.
Does anyone have any ideas?

I had exactly the same problem. I also think it's a bug in 7.6. It seemed solved by downgrading my Time Capsule (TC) and my Airport Extreme (AE) to 7.5.2. To do so start the Airport Utility (in your /Applications/Utilities folder). Double click on the TC or AE. In the Menu at the top on your screen go to "Base Station" --> "Upload Firmware..." and the select 7.5.2. After rebooting your device, downgrade the other. Hopefully your problem is solved as well!

TS1253 i have airport extreme, and printer works with my imac, but not with my mac book pro??

i tried setting up the printer under my wireless network only, and using the printer information, tried both and nothing works, my imac's same settings for the printer, and just cant get it to work.
i am ussing airport extreme, and it shows printer conecting etc. but then it says not programed correctly and it fails.
i dont know what else to try, i have followed every step on the manual, and nothing works..
someone help me

Could you open System Profiler on the iMac and the MBPro and select the Printers entry. Then in the top right pane you can select the printers entry and the bottom right pane will show information about your setup. Can you copy this information from both Mac's and paste back here.

Airport Extreme 6 gen works with new computers but not old.

Hey everyone,
Just bought a new 6 gen AE because our old one got fried. I got the new AE working very quickly, but it only allows my 2012 Retina MBP to connect and my iPhone 5s. My iPhone 4s and 2010 MBP connect, but when I do network diagnostics it says that the network settings are messed up. Does anyone know what I need to do to fix this? I also have the network without a password (we live in the middle of nowhere). Thanks!

Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

Airport Extreme won't work with windows computer?

I can't get airport extreme to work with my other computer which is a windows machine. The windows machine can't find the network address. Sometime it does find an address and appears to be connected, however I cannot connect to the internet with that machine. My Mac does work and connect to the internet. Anybody have any suggestions? Thanks.

I have a toshiba laptop and it works prefectly with a conceptronic usb card. But you must set up the Base Station only with the default options. I mean that you can not hide the SSID, or make an access control with Airport Extreme. You only set up the default options and it works perfectly. When I try to place an access control or hide the network then it doesn´t work and wait an ip as you say in your post.
If you want to connect from Windows to the Base Station you need to close your firewall and no other cable into the Airport Extreme, only the cable that you are connecting to access the Base Station. And it will work.

Green light on Airport Extreme but will not connect to internet

I have tried restarting computer and Airport Extreme but it will not connect to internet. Unit has been working great up until now. I have made no changes in system.
This Airport/time machine is 2009 version.

The Cisco DPC 3010 is a cable modem, so you will need to let the modem completely reset before you connect it to the AirPort Extreme.
It may be necessary to perform a Factory Default Reset on the AirPort Extreme and reconfigure it, but we will try a shortcut first to see if that can be avoided.
Power off the entire network.....all devices....modem, AirPort, computers, mobile devices, etc in any order that you want.
Be sure to disconnect the power cable on the modem, either on the back of the device or pull the power cord from the wall AC jack
Leave everything powered off for at least 30 minutes. Longer is better, as it sometimes takes the equipment back at the ISP longer to completely reset and issue a new fresh IP address to the modem.
After the wait period, power up the modem first, and let it run for at least 5 minutes by itself. If your modem documentation states that the modem should be powered up for 15 minutes, then go with 15.
Power up the AirPort Extreme next, and let it run a few minutes
Then power up other devices one at a time about a minute apart
When the entire network is back up, check the network.
It this does not work, you will have to start over again as above, except this time you will need to perform a Factory Default Reset on the AirPort Extreme.
To do that, power off the AirPort Exterme for a few minutes
Hold in the reset button on the back of the Extreme.....and keep holding it in for an additional 9-10 seconds while you simultaneously plug the power back into the Extreme
Release the reset button after the hold period, and allow a full minute for the Extreme to restart to a slow, blinking amber light
Power off the AirPort now, and start it back up in the proper sequence
If things still don't work, then you likely have a defective AirPort Extreme that will need to be replaced.

Just bought a brand new Airport Extreme and having trouble with it being recognized. I have a Mac version 10.5.8. Is my computer compatible? I have the Airport Express now and it works fine.

Just bought a brand new airport extreme and having trouble with it being recognized. My mac is version 10.5.8. What should I do?

The new AirPort Extreme needs the 6.x version of AirPort Utility, which comes packed in with Lion 10.7.5 or Mountain Lion 10.8.x......or......you can also configure the device using an iPhone or iPad running a recent iOS.
From Apple's Specifications:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
A few options.....
Borrow another Mac running Lion or Mountain Lion for 10-15 minutes and set it up. The Mac running 10.5.8 will be able to connect to the wireless....but it will not be able to make any changes to the configuration of the Extreme.
Update to Lion or Mountain Lion.....but check first to make sure that your Mac will support the operating system first.
Use....or borrow an iPhone or iPad to set up the Extreme

Mac OS X will not connect to wifi, airport is broken, will connect to internet with ethernet cord. Is there an accessory I can buy to replace airport so I don't have to use ethernet cord? Please help!!

Mac OS X will not connect to wifi, airport is broken, will connect to internet with ethernet cord. Is there an accessory I can buy to replace airport so I don't have to use ethernet cord? Please help!!

Since the MacBook Pro currently works, you should put it next to the iMac and compare the network settings for AirPort in System Preferences Network pane Advanced. Also, if you want to start off with the default network settings, you can use Location drop down menu and select +Edit Locations+. Then click the plus sign to create a new location. Set up that new location.
On System Preferences Network pane, AirPort should appear at the top of the list (in the sidebar). To change the service order, click on the gear icon and select +Set Service Order+.
Some additional tests you can try, on top of seeing if it works with (1) WEP security disabled and (2) a direct wired connection to the router.
If you get it to work with either (1) or (2), be sure to run Software Update at least two times to apply any recent updates from Apple. See if that makes any difference to using AirPort with WEP back on.
(3) Start up in Safe Mode
http://support.apple.com/kb/HT1455
I don't know if any third-party software has been installed on the iMac at this point, but Safe Mode will start up with only the essential Apple extensions and processes running. See if it works any better in Safe Mode.
(4) Create a new admin user account in System Preferences Accounts pane
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
Log out and log in to the new account. Try connecting with AirPort in the new account.
(5) Connect the MacBook Pro to the router with a wired Ethernet connection. Make sure its Internet access works. On System Preferences Sharing pane, set it up for +Internet Sharing+ so that it is set to +Share your connection from Ethernet - To computers using AirPort+. On the iMac, try to connect to that wireless network and access the Internet.
That last one (5) may be a good one to try first. It would at least show that the iMac's AirPort is working - you can even set it up to use WEP. If you have any questions about using the +Internal Sharing+ feature, please ask.

All of a sudden my WiFI will only connect with my IMac and not my IPhone or laptop

my WiFi will connect to my IMac But not my IPhone or Laptop and it did up until a couple days ago

You might want to consider changing the name of your wireless network on the AirPort Extreme and then test to see if all devices can connect that way.
If you decide to do this, leave any apostrophes, dollar signs, exclamation marks, etc out of the wireless network name. Use only letters and numbers in the wireless network name.

How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

Check for Updates.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg

My airport extreme only will connect with computer or ipad not both

Similar Messages

Maybe you are looking for