My AirPort has no ip address and I cannot connect to the wireless network. What should I do?

My wireless network is in the residence at my university so I cannot reset the router or modem.
I am seemingly the only one with this problem.
I have tried many things to attempt to make it work, yet they have all been unsuccessful.
What can I potentially do to try and make this work?

Well, what else is connected to your airport? Look at the network name it is using.

Similar Messages

HT4628 My Mac Air OSX10.8.5 won't connect to the internet as it says it has a self assigned IP address and thus cannot connect to the internet. I can only connect to a network by manually typing in the configuration specs. Please help.

My mac air OSX10.8.5 won't connect to the internet. It says it has a 'self assigned IP address and therefore cannot connect to the internet'. Network diagnostics is unable to the solve the problem. It happened suddenly for no reason and now I cannot connect except by typing in the configuration settings manually. Please help me!

Use the Airport Utility or log into your wireless device via http and ensure the DHCP/NAT service is enabled. If accessing via HTTP, you will need to manually set an ip within your local subnet (eg: 192.168.0.x).

My bluetooth says its unavailable....and i cant connect to my wireless mouse. what should i do?

my bluetooth says its unavailable....and i cant connect to my wireless mouse. what should i do?

Hello:
Try resetting the SMC.
Barry

My airport says self-assigned ip and won't connect to the wireless internet.

My airport says self-assigned ip and won't connect to the internet. It's set on Using DHCP, and nothing has changed router/internet wise. I tried it with the firewall off as well, but it still doesn't work. The ethernet works, and I tried setting the ip address manually to the same one as the router. It said it connected, but when I tried to load pages, etc. safari said I was not connected to the internet.
I also tried doing system updates and updating the airport utility - still nothing.

Psychoserenity wrote:
I also tried doing system updates and updating the airport utility - still nothing.
Repair permissions and restart your computer. Now try the following........
See KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
============================
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Also, run the Airport Utility app which is located inside the Utilities folder.

My Epson XP - 400 will not print wirelessly or via USB. The documents just sits in the print queue while the computer is "searching for the printer". I set up the printer on the computer and it is connected to the wireless network.

I'm unable to print wirelessly or connected via USB with my Epson XP-400. The computer continues to say it's searching for the printer even though the printer is set up on the computer, the printer is connected to the wireless network and the USB is plugged into the computer.

Try resetting your Mac's printing system as shown here:
http://support.apple.com/kb/PH14141

My MacBook Pro's airport has an exclamation point and will not connect to the wifi. How do I fix this?

I have tried restarting my computer, turning on and off the wifi, entering my IP address manually, etc. Nothing is working and I have had this problem for a week now. I know the Internet is not the problem because it works for others in my home.

Open System Preferences/Network
Select the Location you use at home
You may need to click the Padlock bottom left at this point if it's locked, enter the admin password to unlock
In the left hand column drag the Ethernet connection to the top of the list and remove any you don't use
Click the Advanced button bottom right
Click the TCP/IP Tab
Set Configure IPv4 to Using DHCP
Click OK bottom right and you should see the Router IP number appear and a unique but similar one for your Mac
Click Ok then click Apply and close the Panel

HT4623 Updated iPhone 5 software to iOS 6.0.2 and now cannot connect to my wireless network (TWC).

Just updated iPhone 5 software to iOS 6.0.2, and now unable to connect to Wireless (TWC). Anybody know the secret?

Contact your cellular carrier. I found this guide to all cellular carrier contacts from Apple:
http://support.apple.com/kb/HT1937
... but I have to say I did not find TWC in there. I hope you know how to contact them.

My ipod is getting stuck on startup and i cannot even access the recovery mode. what can i do to resolve this problem?

Hi.
My ipod touch 5 is getting stuck on startup and i cannot even access the recovery mode.
what should i do to resolve this problem?

Try what you missed here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

"ethernet has a self assigned IP address and will not connect to the internet" - how do i fix this?

A message saying "ethernet has a self assigned IP address and will not connect to the internet" comes up whenever I plug the cable in. Everyone's computers work except for mine work in the house and I have tried different cords and connecting sites.
Please help

Open System Preferences/Network
Select the Location you use at home
You may need to click the Padlock bottom left at this point if it's locked, enter the admin password to unlock
In the left hand column drag the Ethernet connection to the top of the list and remove any you don't use
Click the Advanced button bottom right
Click the TCP/IP Tab
Set Configure IPv4 to Using DHCP
Click OK bottom right and you should see the Router IP number appear and a unique but similar one for your Mac
Click Ok then click Apply and close the Panel

HT1296 I have the original iPhone and I can't sync the address book from my Mac to the iPhone. What should be the problem and can I sync?

I have the original iPhone and I can't sync the address book from my Mac to the iPhone. What should be the problem and can I sync?

Thanks a lot for the answer. I'm so upset, have no even one contact on my phone. I has to do with the moving to iCloud from MobileMe.
I did exactly what you wrote, and when trying to click the vcf file on the iPhone the screen freezing, and then after few long seconds it goes alon to home.
So I tried less contacts in a Vcard, and i'm dividing my address book, doing little by little and it work.
Thank you so much.
I still dont get why the sync with my computer address book is not working.
And why when I moved to icloud all the photos I had next to the contacts are disappered.
I had my iPad, which it still, I did not move from MobileMe to iCloud and all the photos are there!
Anything I can do to use the iCloud on the iPad as well and update the iCloud with the photos?

Hi My Iphone has just been stolen and I cant use 'find my iphone' feature what should I do now?

Hi My Iphone has just been stolen and I cant use 'find my iphone' feature what should I do now, it has important notes and photos?

Change all your passwords. Notify your carrier and the police of the theft. Check to see if your homeowners or renters insurance may cover some of the cost of replacing it.

HT5312 I provided a wrong rescue email address, so I can not receive the information. What should I do?

I provided a wrong rescue email address, so I can not receive the information. What should I do?

And my account also has been locked

Upgraded 4s to iOS8 and can't connect to certain wireless networks anymore

I have an iPhone 4s that I updated to iOS 8. Prior to update, I was using iOS 7 (whatever the latest iteration was), and was able to connect to various wireless networks. Following the update, I am no longer able to connect to the wireless network at my place of work. It tries to connect, does so briefly, and give me an authentication request (screenshot attached). Blank username/passwords don't work, neither does the network name/password combo. Choosing cancel will revert the connection back to 3G.
To try and fix the problem, I have "forgotten" the connection, re-started the phone, and neither has worked I have reset my network connections, and it worked immediately after the reset. The phone was inactive for a while, and upon unlocking, it had reverted to 3G. When I tried to re-connect, it gave the same errors already stated.
I no longer have a back-up from before the upgrade, so I can't go back to 7. My wireless connection on my home network is fine. Nothing has changed with the work wireless since it was working with my iOS 7. It uses a WPA-Personal security, and there are several repeaters for the signal throughout the building.
What is going on and how can I fix it?
http://www.pinterest.com/pin/create/extension/

Set it up as new device, make sure all the apps are updated in the iTunes library and try to use iTunes to restore it again from the latest backup:
iOS: How to back up your data and set up your device as a new device

HP printer won't connect to the wireless network which has a WPA_PSK encryption

My new HP Photosmart 5520 printer wont connect to my wifi which has a WPA_PSK encryption. I tried to put it on a unsecured wireless and it can connect to the wireless but can't connect to my mac os 10.7.
Thank you!

Hello erking,
Sorry to hear that you are having an issue with connecting the printer to your Mac over a wireless connection.
I have done some research and I have found a great document that deals with The Printer Is Not Found During a Wireless Network Installation.
Please feel free to write me back and I will be happy to assist you further with any questions or concerns you may have.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My AirPort has no ip address and I cannot connect to the wireless network. What should I do?

Similar Messages

Maybe you are looking for