My Airport is hooked up thru my Windows 7 - but won't let me connect now to my ipad or iphone

My Ipad will not connect now to my Airport express-?

This appears to be a normal cable modem. Suggest that you try the steps in this User Tip posted by forum expert Tesserax:
AirPort - Complete Power Recycle
To allow the modem to fully reset, be sure to leave it powered off at least 15-20 minutes. Longer will not hurt. I sometimes had to leave my modem powered off up to 90 minutes when I was using a different Internet Service Provider for it to completely reset.
If the AirPort still will not allow multiple devices to connect to the network, it would be a good idea to take the AirPort to an Apple Store....if you have one near you....to let them take a look.

Similar Messages

ITunes on Windows won't let me transfer apps or music to my iphone 4. How do i fix it??

iTunes on Windows won't let me transfer apps or music to my iphone 4. How do i fix it??

Do you have Sync Apps selected under the Apps tab for your iPhone sync preferences with iTunes with your chosen apps selected below and Sync Music selected under the Music tab for your iPhone sync preferences with iTunes with your selections below?
Any error message provided?

While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player.Or neither connects to the server that i created

While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player. Or, any other devices doesn't connects to the LAN server that i created in the Game.
Could any one help me please.

Please do not post more than about 50 lines of console logs or output from an Application crash at a time. No one can make it through those.
If you had a kernel panic, those are Full of good information and should be posted in their entirety. They are stored, and can be read back and posted using this article:
How to log a kernel panic

My brand new out the box airport extreme won't let anything connect to it.

My brand new out the box 5th gen (2013) airport extreme won't let anything connect to it. I've tried several setups from sratch by the book. multiple resets and restores still nothing. It just keeps telling mt that the password is in correct even though it is 100% right.
My curren set up is as follows. Phone Line -> ADSL2+ router -> Airport extreme. There is also an old airport express running of the router, this was done because the airport extremem was failing to work.
Trying to connect:
2x iPhone 4s
2x macbook air
2x Mac Pro.

You will want the Extreme to be in bridge mode if it is currently disabled. (see image below)
This will allow the ADSL2+ router to perform two important functions for your entire network: 1) Provide both the DHCP & NAT services, and 2) Provide PPPoE support to allow access to your ADSL ISPs network.
If the Extreme is left in its default state, a router, it will conflict with the first item and you will have want is known as a "double NAT" condition. Something you will want to avoid.

HT201210 Can I use my old iphone as an ipod? if I hook it up to my itunes it won't let me install playlist

Can I use my old iphone as an ipod? if I hook it up to my itunes it won't let me install any music. It disconnects and phone goes to apple screen

Using an iPhone without a wireless service plan

Windows Movie Maker won't let me use QT clips

I recorded some clips for a movie, but Windows Movie Maker won't let me use them! Is there any way to convert my Quick Time clips into clips for Windows Media player? Any Help is appreciated!
Windows Windows XP

Windows Movie Maker does not import MOV files as you surmised. Third party software is necessary to convert it for importation to WMM.
One such software(free) that works is: 'RAD Video Tools' from 'Bink and Smacker':
www.radgametools.com/bnkdown.htm
The RAD Video Tools software will allow you to convert MOV files to AVI files, which will import into WMM
A FAQ page on converting files w/the RAD s/w is here:
www.radgametools.com/binkhcon.htm
It may look intimidating at first but all you really need to do is:
1) Browse to your MOV file, select it, then click 'convert a file' at bottom menu.
2) Then in the new window that pops up, make sure the output file type is .AVI(the default output file type should be AVI), then click on 'convert' at right menu.
3) Import the newly created AVI file into WMM
Hope this is helpful,
Buzzhead

Airport Card finds network and says connected but won't let me on internet!

My airport is on and finds a network, shows full strength of signal (like it's done for the past 8 months). But it has stopped letting me onto the internet. Safari and Mail hang and say they are not connected. If I go ahead and plug the ethernet cable in (from same network) it starts up fine. I live in a hotel and have done the same thing for 8 months, why today would it start doing this? Can anyone help. This is my first mac and I haven't the foggiest how to deal with this. I've turned airport off, restarted, turned it back on etc. It always finds a signal and says it's ready, but won't let me onto the internet. Thanks for any help you have.

Is the internet service also password protected? (As in, do you need a password for both the wireless and for the internet connection?) If so, then when you run the "assist me" option you should set up a PPP connection. That's my situation but I still have problems with it remembering my settings after rebooting or disconnecting...

Windows 8 itunes won't let me add anything to iphone

windows 8 itunes won't let me add anything to iphone..apple community doesn't list the iphone as a product registered under my apple id, but the phone is listed on my authorized devices. any ideas? and do i need to get it to show as a registered product?

I have the same problem. I can't sync any apps or music on my iphone. I can't sync any music purchased through itunes on my ipod. I haven't even tried connecting my ipad for fear that it'll mess that up as well. I try to authorize my macbook but I get an error. The weird thing is that I am able to still play all of my purchased music through itunes so it seems that the authorization is at least somehow partially recognized.

IMac with bootcamp and parallel boots into windows 7 but won't boot intoxc lion.

IMac with bootcamp and parallel boots into windows 7 but won't boot into Mac OS lion?

Hi,
Thanks for your suggestion. Actually that was not the problem, because I had the Mcintosh drive set as my boot drive. The answer was that my Lion Os got somehow corrupted and I had to reinstalll Lion. This was all after I discussed the situation with the Apple Support people.

K8T (MS 6702-020) Goes thru the boot screens, but won't load Windows!

My computer was running fine and turned off normally the last time it worked. The next time I tried to turn it on it would go thru the boot pages, but as soon as the Windows screen came on the computer reboots. It won't boot in "safe" mode or from CD either. I have exhausted my knowledge and need some help to determine my problem.
I definitely could have missed something or did something wrong in what I have tried, so starting from the beginning on any troubleshooting would be appreciated.
Thanks for any help.
Xtech69

Hi Henry;
Thanks for getting back to me.
Sorry it took me a few days to answer you, but I caught a cold and it laid me out flat!!
I put together as much information on the system as I could find. It is:
Motherboard:   MSI K8T Neo-FSR K8T800 P/N 601-6702-020      VT8237
CPU:        Athlon 64 3400+   w/ cooler (runs about 120 degrees)
Memory:     2X Ultra ULT30215 512MB   400Mhz DDR
Bios:        AMI Ver. 3.31a
Video:     ASUS AH3450
Hard Drive:     120GB WD1200JB-75CR   (Primary Master)
Lite-On      DVD-R/W   IDE      (Secondary Master)
??        CD-R/W   IDE      (Secondary Slave)
Iomega     ZIP-100   IDE      (Primary Slave)
??        1.44 MB   IDE Floppy (A)
It's all standard configuration.
If you need more, just let me know how/where to look and I'll do my best to find it.
Xtech69

TS3212 set up tells me my drive is unavailable but won't let me switch to another drive, I'm using windows vista

I used my iPod shuffle with Windows XP successfully, I recently switched to Vista and now can't download podcasts or access my shuffle on the computer. I tried to re-install the iTunes program but get an error message : drive not available, but it won't let me switch drives

error message I received: "itunesminiplayer.resources is not a valid short file name"
That's perfect, thanks.
Let's try the following user tip with that one:
"not a valid short file name" and "invalid character" install errors

Downloaded windows 7 but won't open bootcamp from usb

If anyone can pleas help me, I followed all the steps to partition my mac hardrive. Everything went well I downloaded windows 7 but now I try to open up usb so I can set up bootcamp and windows 7 will not open any of the usb, it detects them but I cannot open it. I've looked everywhere for a solution but cant find any. Please help!
Greatly Appreciate it!

Thank you David__B! Your suggestion worked perfectly. All the files are correctly associated in both Explorer and Bridge. And it didn't take all that long, mostly uninstalling. The Adobe App Manager very efficiently installs several different programs with very little fuss.
I am not sure, but I think it may have been an old plug-in to Bridge back in the CS4 era that I didn't even know I had that was causing the Bridge file association problems. Uninstalling CS5 after installing CS6 seems to be causing Win Explorer problems, not just for me. Based on this experience, I would recommend that anyone with several previous installations of Adobe CS do the following:
Save your plugins and preference files in a back up file.
Uninstall all the old adobe software.
Run the the cleaner you suggested. (http://www.adobe.com/support/contact/cscleanertool.html).
Install CS6 programs from the CCloud or wherever.
Add your plug-ins back in as you need them one at a time to be sure they work.
If you have already installed CS6 and are having file association problems, just uninstall everything and start at step one. You probably won't save time trying to fix the registry and manually associate file types--- yada yada yada.
Steps 1-6 will give you a nice clean install and salvage only good plug-ins.
Beth

Acrobat XI Pro installed on Windows 7 but won't start

I bought a stand-alone version of Acrobat XI Pro, and installed it on my Windows 7 computer. The first time I try to launch, I get a window asking me to verify the serial number. The DDL for product name doesn't list Acrobat XI Pro and it won't accept my serial number (even though I copy/pasted it from the order page on the adobe.com site). It says that the serial number is valid but that the product isn't on the machine. And yet, when I navigate to program files> Adobe > Acrobat, viola--there it is.
When I double-click the exe file, I get the message, "validating serial number", followed by "serial number is valid, but qualifying product could not be found..."
I've tried uninstalling and reinstalling several times, to no avail. And yes, I've also tried restarting after installing as well. I am, of course, on a deadline and really need this working...
Help!

I'm pretty sure that I bought the full version, but will check.
The window wasn't asking for what version I upgraded from, but I can try that...and I hadn't installed the old version on this machine (new computer).

Firefox quit working (at all) after last two updates (browser window opens but won't open any webpages whether clicked from bookmarks or browser or typed into address window).

"Troubleshooting Information" (from Firefox Help menu):
XML Parsing Error: no element found
Location: jar:file:///C:/Program%20Files/Mozilla%20Firefox/omni.jar!/chrome/toolkit/content/global/aboutSupport.xhtml
Line Number 1, Column 1:

'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

Recently installed Acrobat XI pro on Windows 8.1, won't let me feed into scanner, forces me to scan pages one by one, how do I solve this?

I recently installed acrobat xi pro on windows 8.1. When I try to scan to create a pdf, it won't feed, instead it directs me to custom page and makes me create page by page. It's not a problem with my computer. How can I solve this? JK in Houston

Hi jk in texas,
Since you're using Acrobat on Windows, you can set up a scanning preset that uses the scanner's TWAIN driver. When the automatic document feeder is loaded, use the preset to have Acrobat "talk" to the scanner. For information about setting up presets, see Acrobat Help | Scan documents to PDF.
Please let us know how it goes.
Best,
Sara

My Airport is hooked up thru my Windows 7 - but won't let me connect now to my ipad or iphone

Similar Messages

Maybe you are looking for