My airport time capsule did not set up successfully, and then status light flash amber
Hi, Guys
I am the first time user of the time capsule, please help how to proceed?
I have set up the first time and my airport time capsule does not set successfully, then I try to reset to factory setting. After this, although I use the ethenet cable to connect the router to the airport, the status light flash amber, always, even after the reset.
Also, I can see that airport time capsule base station from the wireless network when airport is plugged in. However, when I want to access to it.
Thanks for your guidance, but the product is really anoying. First, I am sure that the airpor utilities is 6.3.
and I also follow your instruction that to set the IPv6 as local link mode. But still get the same error as mentioned in my first post.
Therefore, I have tried to use the bridge mode but could not find it, and therefore still can not set it up successfully, even though I reset the factory again(press the reset button 5 secconds at least).
Similar Messages
-
after I entered the password of my iCloud ID, it prompted out asking me to check email from an emai address that I did not set for rescure? and then I cannot login.
Try going to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?
Is it because the backup on progress?Hmmm.. ok.. well you are kind of on your own.. purchasing from another country leads to problems.. especially as the TC itself is regional .. all the setup applies to the region it is sold in.
Make sure you are using ipv6 in the computers..
See
http://support.apple.com/kb/TS4597
The 6.3 utility will not work without it.
Make sure all names are short, no spaces and pure alphanumeric.
Do a full reset and start over.
But there are no more controls.. you cannot set mode..
You can set wireless channels.. so do .. try different wireless names for the different bands.. and set fixed channels.. whatever your country allows, usually 2.4ghz you can use 1, 6, 11 but 13 maybe an option as well. 5ghz is much less clear and there are more variation. Just set to one channel and then another.
Set WPA2 Personal security with a 10-20 character password .. pure alphanumeric mix of upper and lower case and numbers. -
I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?
If you migrated all the info from time machine to your new MBP. The TM will usually ask to connect to the old backups.. sorry I am not sure is this what you want to do.. Personally I think you start a fresh backup.
BTW Time Capsule does not do anything.. it is a dumb hard disk in a box.. it is TM that does everything.
Look at B5 and B6 here about connecting to your backup.
http://pondini.org/TM/Troubleshooting.html -
I up loaded iOS7 last night and when I opened my iPad this morning, I was ask for a password. The problem is, I did not set a password and when I used the 4 digits I would normally use, the i-Pad disabled and I cannot get it open. Can anyone help?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
My old email is not anymore existing.It was my Apple id. I updated my profile changing enail and password. Unfort. my Iphone did not update my profile and then I can not use my account by it. how can I do to reset my profile on IPhone4
Settings > iTunes and App Store > Apple ID > Sign Out > Sign In with the current Apple ID
Settings > iCloud > (Scroll Down) Delete Account > Sign In with the current Apple ID -
Airport time capsule 2TB not emitting 802.11ac to my Late 2013 MBPr
PHY Mode: 802.11n
this is displayed when I'm connected to the Airport Time Capsule from my late 2013 MacBrook Pro Retina 15"
My laptop is 802.11ac compatible however the connection to the airport seems to only connect in 802.11n
I've connected Airport to my Verizon Actiontec Mi424WR and have disabled wifi on the actiontec.
Any way I can modify the connection to connect at 802.11ac???Please don't post in both areas.. we see posts in both..
Airport TC not emitting 802.11ac -
Airport time capsule will not communicate with apple tv
I have just purchased the new AIRPORT TIME CAPSULE...it will not communicate with my APPLE TV..
Is the Time Capsule the only wireless router in your current network configuration? That is, is it connected directly to an Internet modem (and not another router) via Ethernet? Is the Apple TV in the same room, different room, or different floor from the Time Capsule?
-
Airport Time Capsule wifi not far enough
I just bought and installed an Airport Time Capule 3TB. It works great so far BUT it's installed in my office which is on one side of my house and on the first floor and my bedroom is on the second floor on the other side of the house. Any suggestions to extend the wifi so it will have a better signal on the other side of the house?
It's hard wired into my computer in my office so moving the unit isn't an option. Does Apple have something I can install midway thru the house to boost the signal?
Thanks for any help!Does Apple have something I can install midway thru the house to boost the signal?
That would be an AirPort Express for a good choice, or an AirPort Extreme (same router as the new Time Capsule, but no hard drive built in) for the "best" choice.
http://www.apple.com/compare-wifi-models/ -
Remote Access to Airport Time capsule - Noone is providing a simple and workable solution
Can Anyone provide a clear, simple and workable solution to have remote access to Time Machine Disk, Please please help !!!!!!!!!!!!!!!!!!!!!
When you say noone is providing a solution.. we have no idea who the noone is??
Did you read Tesserax document on remote access??
https://discussions.apple.com/docs/DOC-3413
Tesserax is definitely someone.. and he has done a very good job of giving you 3 alternatives.. all of which work at least for some people.
If you have read that.. then please tell us what you have tried and what failed??
The issue most people have is not actually access to the TC .. it is the fact that you do not have a public static IP address. If you really want simple access to the TC it is dead easy.. buy a static IP from your ISP. Then you never have problems. Just directly access it using AFP (which does mean you have to do it from a Mac). Or buy a VPN router and put the TC in bridge behind it.. you still need a public IP that is static to make this simple and workable.
ISP deliberately use dynamic IP addresses to prevent you hosting servers.. The TC is a file server in this setup. They are trying to stop you doing this since part of requirements are you don't host servers on non-business accounts.
What we need to know if you run into trouble..
The exact network layout in your home? How is the TC configured. It must be main router with public IP on the WAN interface for BTMM to work.
Which method you are using.. please use Tesserax's numbered system?? His methods are pretty much in order of ease.. BTMM is the apple method to do it. Use this first and foremost.
And what device are you trying to use to access it from remotely??
You need to recognise here that Apple has made this easy for only one protocol.. AFP. No other protocol is fully supported other than by trickery. -
Cant find it clearly in tutorials...
You can do it.. should you do it is another question.
Store files on the TC.
This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
The TC is not suitable for network file server.. but many people having no choice press it into service as such.
Major issues.
1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. Think this out very clearly.. how and to where are you going to backup your files. And you will need to buy a third party like CCC to do backup.
2. The TC cannot be partitioned and mixing TM backups and data is not great. It was and is and ever shall be a backup device for Time Machine.
3. The drive is slow to spin up and quick to spin down.. there is no control. In fact the TC is so lacking in controls for even the router side.. that you cannot do more than the most basic of setups.
The following are controls on the hard disk side.
Reformat it. You can name the share. You can do a full archive of the whole disk. This will go at a speed of aprox. 30-50GB/Hr so calculate how long an archive of a full 2TB will take.
4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
Even apple btw say don’t do it.
http://support.apple.com/kb/TS5168 Although mostly about FAT32 it adds network drives.
5. iTunes can constantly lose connection to the library. The disk is slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
Read pondini for some work arounds.
Q3 here. http://pondini.org/TM/Time_Capsule.html -
So...
I have a modem across the house and my room is at the opposite side. I believe that you have to connect the Airport Time Capsule via modem cable in order for you to appreciate the benefits of the boosted up Wi-Fi. However, I want the airport time capsule in my room, without having any extra cables plugged into it AND also benefit from the Wifi boosts, as well as back it up wirelessly.
Is there any way to do this? I was reading up on it and there are search queries bringing up "bridges" and all that stuff, but I haven't found a clear answer on it.
So, to recap:
I want the Airport Time Capsule to not only back up my rMPB and help my wifi signal out, but to do all of this with no additional cables having to be plugged in.
Thanks.Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods -
HT1178 AirPort Time Capsule set-up issues.
The initial set-up of my AirPort Time Capsule does not complete. The error message is "No configured AirPort base stations have been found". I have connected the TC to the ISP modem/wireless router with an Ethernet cable. The AirPort Utility has a green dot for Internet underneath the picture of the world. When I check the status of the connection there is a yellow dot for "Internet Connection" and a yellow dot for "No DNS servers". My reading found that this new TC should be set up as the primary base station if you are connected to an existing network. I do not know how to do that. It was also suggested that I disable the wireless radio on the ISP modem/wireless router instead of having two networks. I have not done that yet as when I contacted the ISP techie he advised that I just set up two networks instead of turning off their wireless radio. Any thoughts would be appreciated.
My reading found that this new TC should be set up as the primary base station if you are connected to an existing network
That would not be correct. If the TC is set up as the primary base station, then it will be handing DHCP and NAT routing duties......when it should be in Bridge Mode, since you have another router "upstream" on the network that is already handling the same network services.
The result is two devices both competing against each other trying to control the routing functions on your network, causing conflicts and other issues.....which likely explains your results. You only want one device doing this on a network.....which means that the TC should be setup in Bridge Mode on your network.
It was also suggested that I disable the wireless radio on the ISP modem/wireless router instead of having two networks.
There is usually no need to do this unless you find that there are interference issues being created between the networks. It won't hurt to turn off the wireless on the modem/router, but then again it may not help either. My advice would be to leave the network on at least for the present time, but your call on that one.
I suggest that you start over and try the setup again on the TC.
If you decide to do this, with the TC powered on, hold in the reset button on the back of the TC firmly for 10 seconds and release. Allow a full minute for the TC to restart to a slow, blinking amber light. If you have a new TC, the reset button is located to the right of the power cord port on the back of the TC.
Connect an Ethernet cable from one of the LAN <--> ports on the modem/router to the WAN "O" port on the TC
On your Mac, open Macintosh HD > Applications > Utilities > AirPort Utility
Click the Other WiFi Devices button
Click on Time Capsule
Or, if you are using an iPhone or iPad for the setup....
On the home screen, tap Settings
Tap WiFi
Under the heading of Setup a New AirPort Base Station, tap Time Capsule
AirPort Utility will take a minute to analyze the connections and then suggest a setup. The window will look like the example below, except that you will see a Time Capsule icon.
Type in a name that you want to use for your TC wireless network
Type in a device name that you want to call the TC
Type in a password for the wireless network and device
Verify the password
Click Next
The utility should configure everything for you in a minute or two. When you see the display indication of Setup Complete, click Done
That should be all that you need to do.
At this point, you should be able to locate the wireless network that you created on the TC, and enter the password to connect. -
Just bought new time capsule- need help setting up WiFi network with another router
Here ismy situation.
I had a wireless network setup up at home using a Belkin wifi router.
I have 2 macBooks (1 pro, 1 air) and 2 iphones that connect wirelessly and a desktop PC that is hard wired to the ethernet port. In addition, I have a Verizon wireless network extender plugged in by ethernet. All of the hard-wired gear is in our 3rd floor attic office (and the wireless signal was strong throughout the house).
The Belkin wifi router was plugged into a wall ethernet jack that is in turn wired into a Linksys router in the basement (along with multiple other ethernet ports througout the house) and is hardwired to the Cable modem next to it. All of the hard-wired ethernet stuff (including the router in the basement) was there when we bought the house, and I have no clue in the tangle of wires how to sort them out (but don't really think I need to)
I just purchased a TimeCapsule to do wireless backups of my 2 macbooks, and tried to set it up alongside the existing wireless modem.
Needless to say, this did not work well. I called AppleCare, and was told that the TimeCapsule needs to be the "1st" wireless adapter, so I went into the basement, and connected the time capsule directly to the cable modem, and then out to the basement router. The Belkin router still needs to be in the attic to supply the PC and the Verizon adapter (so it is near a window for GPS signal).
If I try to name the WiFi network the same SSID on both the TC and the belkin router (to have dual signal strenth coverage) the whole thing gets messed up and the TC cannot be "found" by the aiprort Utility software.
What I have done now is that I have 2 side-by-side wireless networks with 2 unique names (actually 3, because I enabled the 5Ghz signal on the TC), but our wireless devices do not "switch" automatically from one SSID to another stronger signal SSID as we move through the house
Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.
OK.. sounds like a mess.. or at least messy and the previous people should have left a log book with all the IP address info in it.. you have far too many routers.. but from here it is impossible to tell how they are configured. Most are probably just setup as AP.
Naming rule for wireless.. Same SSID same security different channel.
SSID ie wireless name to work on the PC side should have no spaces and no special characters. TC name should also follow that rule. So the devices need to all set with fixed channels.
Don't worry too much about iStumbler and what is outside your house.. there isn't enough channels at 2.4ghz anyway. And you are going to need to use them all. There are only three non-overlapping channels. 1, 6, 11 so set each device to one of those channels. The TC should be as close as you can to where you normally use the MacBooks.. and turn on the 5ghz. You will have to leave it to automatic name so the Macbook can also roam across from 2.4 to 5ghz. But if you care to use a different name and force it onto 5ghz the speed is much better as long as you are in the same room.
Roaming is great in theory.. often in practice it just doesn't work.. you need to step in and turn off wireless and then turn it back on.. you can quickly see which router it is connecting to by hold down the option key when you click the airport fan in the top menu area.. and look at bssid.. you will have to figure out which number MAC address relates to which router.
Also do not be surprised if Lion gives you issues. It seems to often drop out and lose connection to the TC as a backup device even if internet is still working. -
How to use airport time capsule with multiple computers?
I'm sure there are some thread about this but i couldn't find it... so sorry for that but hear me out! =)
I bought the AirPort Time Capsule to back up my MBP
And so i did.
then i thought "let give this one a fresh start" so i erased all of it with the disk utility and re-installed the MBP from the recovery disk.
I dont want all of the stuff i backed up just a few files and some pictures so i brought that back.. so far so good.
Now i want to do a new back up of my MBP so i open time machine settings, pick the drive on the time capsule and then "Choose" i wait for the beck up to begin, and then it fails. It says (sorry for my bad english, im swedish haha) "the mount /Volume/Data-1/StiflersMBP.sparsebundle is already in use for back up.
this is what i want:
i want the "StiflersMBP.sparsebundle" to just be so i can get some stuf when i need them. it's never to be erased.
i want to make a new back up of my MBP as if it's a second computer...
so guys and girls, what is the easiest and best solution?
Best regards!TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html
Maybe you are looking for
-
How to capture a charateristics value from a selected row in IP
The requirements is to select a line in the summery layout and go to detail layout for further planning. In BPS, it's very easy to achieve this, since we can use the variables in the WIB to capture the value of selected line, In IP's query, after cli
-
Using TIme Machine on a MacBook Pro with an AFP connected External HD
I have successfully been able to setup my MacBook Pro to use TM to an external drive connected to my MacPro - however there are some interesting limitations/observations/ To make this configuration work - I had to go into the sharing system preferenc
-
I have checked and have the latest software installed but can'ttransfer any movies etc over to my iPad
-
Is my MacBook to old for these updates?
im having a hard time updating
-
Can someone pls tell me where I can modify the message header in emails. For exmaple: From: Gallery Center Sent: Tuesday, October 19, 2004 8:57 AM To: Gallery Center Subject: Antique Liquidation Request I would like to change the From: info to includ