My Airport utllity is not recognizing any of my devices

My TC and AE are flashing amber and airport utility does not recognize any. It was working fine until yesterday. I tried to set up my time capsule to make sure that was the right network and when I clicked continue, it did not recognize any of the devices. How can I solve it?

Have you followed the instructions in this manual?
http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf
See Page 46 or Page 42 depending on whether your AirPort Express device is 802.11n or 802.11g.

Similar Messages

  • TS1363 after up dating to 11.1.5.5 itunes does not recognized any of my devices.  I've tried everything listed.

    after up dating to 11.1.5.5 itunes does not recognized any of my devices. I have tried all the recommendations in help.

    Updating the USB driver did work.  Referenced in other postings as Section 5.  I guess I had not tried that one.
    Thanks

  • ITunes not recognizing any of my devices

    Hello - about 2 hours ago my iTunes (10.7) running on a Mac w/ 10.8.2 stopped recognizing my devices (iPhone 4S w/ iOS 6), Ipad (gen 1) and Apple TV (3 gen). I reset my apple tv, turned on/off Home sharing (all devices are indicating they have the right Apple ID),turned off wifi and shut down everything. Not sure what else I can do. I even tried to connect my Remote app again to either itunes or apple tv, but it could not find either. What to do... what to do

    Hi ..
    Try these support articles ...
    For Mac >  iOS: Device not recognized in iTunes for OS X
    For Windows >  iOS: Device not recognized in iTunes for Windows

  • My airport express is not recognizing an IP address. How can this be fixed?

    My airport Express is not recognizing an IP address. How can this be fixed?

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Power-up the modem; wait at least 10-15 minutes.
    Power-up the base station; wait at least 5-10 minutes.
    Power-up your computer(s).
    In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

  • My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

    My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

    I have an external firewire burner; it never shows on the desktop unless I insert a CD or DVD - that icon will then show (if I have my preferences set to show those on the desktop). Hae you checked in Disk Utility (Applications > Utilities) to see if it is listed under drives?

  • USB not recognizing any of my iphone?

    Please help!
    My macbook is not recognizing any of my iphones. I have 1 3gs and 1 3g phone when I plug them into usb ports they do nothing. Not even charge. When I connect the to my Macbook Pro the connect and charge and recognize fine. Can anyone help? Thanks

    Are you really running Tiger 10.4.11 still on your MacBook?
    This may be an issue for your iPhone.
    Adam

  • ITunes 12 not recognizing any attached devices

    I have installed uninstalled and reinstalled iTunes 12 about 3 times.  It will not recognize any of my devices, iphone, ipod, ipad, etc.  My PC is running Windows 8 and it is seeing the usb connections each time I attach a device.  iTunes does not see them.  I ran the diagnostic and it stated that no devices are connected.   I tried reverting to a previous version, but the update changed my library which the older version will not recognize.  Has anyone found a solution?

    HI RAM0402,
    I see that you are having some issues with iTunes identifying your iOS devices. Here is an article that will outline some further troubleshooting steps that you can take to address this issue:
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    http://support.apple.com/en-is/TS1538
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Photoshop is not recognizing any of my installed printers (inconsistently...)

    Photoshop is not recognizing any of my installed printers (inconsistently...) any suggestions? thanks

    Moving this discussion to the Photoshop General Discussion forum.

  • Itunes not recognizing any device

    itunes not recognizing any devices - old or new

    iPad not showing up in iTunes on a PC
    http://www.apple.com/support/ipad/assistant/itunes/
    iPad not showing up on a Mac
    http://support.apple.com/kb/TS1591

  • My itouch is not recognized by my computer, device manager or itunes!

    My itouch is not recognized by my computer, device manager or itunes. However, it will charge on a wall charger. I'm not able to upload any of my music to my itouch now because its not recognized. Ive tried connecting to 3 other computers and used 2 other cords, but the itouch still isn't recognized by any of them. I've uninstalled and reinstalled all of my apple programs and it's still not working. Any ideas?

    Here are some ideas:  iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows, http://support.apple.com/kb/TS1538

  • The iTunes on my desktop is no longer recognizing any of my devices (iPads, iPods, or iPhones).  I am unable to sync.  And when I connect a device I am asked on the device if I "Trust this Computer".  When I hit "Trust" nothing happens.  Help?

    The iTunes on my desktop is no longer recognizing any of my devices (iPads, iPods, or iPhones).  I am unable to sync.  And when I connect a device I am asked on the device if I "Trust this Computer".  When I hit "Trust" nothing happens.  Help?

    Hello monkeymonkeydo,
    To get this fixed use the steps found here:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    Hope this helps.
    ~Julian

  • Optical drive not recognized as an ATA device in Apple profiler

    The dvd drive is not recognized any more in Apple Profiler (nothing under ATA) and the CD or DVD are not recognised neither. I can hear the drive is working but that's it. The problem happened just after I upgraded to 10.4.10. Any help would be welcome!

    You will want to ensure your USB DVDRW drive is properly connected to the Windows 8 VM in question.
    To check this you will want to use the Vmware vSphere client to connect to your Vmware ESX/ESXi host.
    Next, you will want to edit the settings for your Windows 8 virtual machine and check that you have added a USB controller and then connected the USB device to the controller. This is a manual assignment. If your DVDRW drive you wish to connect is actually
    connected via SATA on the motherboard of the host then you will want to go through the same process to ensure the CD/DVD drive of the host has 'connected' and 'connect at power on' selected under settings.
    Below is a screenshot of what you should see:

  • TS1538 itunes does not see any of my devices.

    itunes does not see any of my devices.  It used to. But not any more. Why. They show up in Windows. But not itunes.
    <Edited by Host>

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with               
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • HT1386 itunes will not recognize any of my devices when I try to sync them

    itunes will not recognize any of my devices when I try to sync them. How cn I fix this?

    Hello, bone61. 
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.  If the issue persists try all remaining steps. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • HT1386 Itunes will not detect any of my devices

    Itunes will not detect any of my devices.  Any suggestions?  I've shut down and restarted, turned devices off and on.  Not sure what else to do.

    Hello, bone61. 
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.  If the issue persists try all remaining steps. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

Maybe you are looking for

  • Network DAQ Connectivi​ty Issue

    Hello, I am having connectivity trouble with my NI cDAQ 9191, which is a network DAQ device. The strange thing is that I can get it to work on one laptop, but not the client's laptop. Both laptops are actually the same model (HP Probook 5430s) runnin

  • Using GIMP and X11

    I originally posted this elsewhere in discussions; however this may be a better placement for it. I use GIMP which requires X11 and recently it has stopped working. I rolled back to an older version of GIMP, installed the Xll upgrade on the Leopard D

  • What is Silverlight 5.1.31211.0 and how did it get on my computer?

    I've checked sllauncher.exe, the registry, various update checker programs, the official Silverlight download page, and the official version history, and they all confirm the following: [1] The latest version of Silverlight is 5.1.30514.0. [2] The ve

  • Short-range wireless question

    My computer sits across the room from the telephone outlet. I would like to get rid of the telephone line I now have running to the DSL modem and the Ethernet cable running from it to my Mini. The guy at the Apple store suggested I get the AirPort Ex

  • Seggragating Deliveries created for STO and Sales Order

    Hi Friends, I have a requirement.. I am looking for list of deliveries in LIPS table. But I find that this table lists all deliveries created for STOs as well as Sales order. My requirement is to select only those deliveries which are created for Sal