My airprint printer disappears after a few hours
Using Windows Vista, HP Photosmart 7515, Belkin 750BD router with latest firmware, when I first start my printer I can use airprint from my iPad or my iPod, but after sometime (a few hours) I can no longer see the printer on either my iPod nor my iPad. If I turn off the Wireless connection on the printer and turn it back on or power off the printer and power it back on, I can see it to airprint again. In any case, I can wirelessly print to the printer using ePrint and from my desktop computer in all cases, even when I cannot access them with airprint. I just bought and installed the printer. Does this sound like a defective printer, or??
Hello,
The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
Another thing, and this will sound odd, is to make sure the printer is plugged directly into a wall outlet. Do not use a surge protector or powerstrip. The printer has a built in surge protector so you do not have to worry.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
Similar Messages
-
AirPort Extreme disappears after a few hours
So I just got myself a new APExtreme. After a few hours of operations I have to power-cycle the device because 1) It disappears from the AirPort Utility and 2) As it does so it completely disconnects all of the itunes homesharing (and I believe all of the bonjour services disappear). Somehow these two events occur simultaneously. The rest of the network works fine (as a matter of fact the currents state is exactly this whilst I type this note). I have 5 laptops and 2 mac minis all experiencing this with the Extreme.
Any one experience something similar?Open up a OS X terminal window and at the prompt, type:
ping <basestation IP address>
ie. ping 192.168.1.1
If you do this from the Windows boxes, the command is:
ping <basestation IP address> -t
It will output a ping to the router constantly and give you response rates...
What happens when it disconnects? Do the pings time out or do you get an error saying no route found to host? -
Whenver i save any contact in iPhone 6 it disappears after a few hours. How to resolve this issue?
I have tried saving contacts in my brand new iPhone 6, but the contacts seems to diappear after a few hours. I tried shutting down my phone and even backing up contacts on iCloud but the problem ceases to exist. I have also tried saving the same contact several times on the device, but is vanishes again and again. It's getting on my nerves.
Can someone help me with that ?
-DesperateSince the iPhone 4 and 4S are so mechanically similar, it might be a problem that can be fixed by the same fix I discovered for my iPhone 4S. I was having the exact same issue and, after researching it on the web, took my out-of-warranty iPhone to the Apple Store where it was repaired in 20 minutes at total cost of $6 (including tax). Apple has designed a shim that slips into the volume control assembly. I posted about it on my blog, here:
http://markshangout.com/blog/2013/8/22/iphone-4s-volume-adjusts-up-down-on-its-o wn.html
Mark -
JJust bought a new iPhone 6 ... I have purchased the same ringtone twice now ... It works for a few hours and then disappears?? Please help:)
It's a ringtone that you've just purchased, and you downloaded it from iTunes on your phone and the purchase went through successfully (and there isn't a Downloads tab in the iTunes store app with it still downloading) ? It should show in Settings > Sounds > Ringtone (and Text Tone), and in the Contacts for setting for individual callers (tap the Edit button on a contact). If not then have you tried a soft-reset of your phone to see if it shows after the phone has restarted ?
-
HP software loses connection to printer after a few hours
I have been having this problem since I bought my HP Deskjet 3052A a few months ago. There is a program in my Startup folder called "Monitor Ink Alerts - HP Deskjet 3050A J611 Series (Network)." It works fine when I start up my PC, but invariably after a few hours, I will get a message (and an icon in the system tray) saying that it has lost connection to the printer (I do not have the exact message at this time). The message also says that wireless scanning is not available. At that point, my PC will not print to the printer, although wireless devices using HP ePrint still are able to print. Restarting the PC will fix the error. I have set the printer up with a static IP address to try and fix the issue, but it continues to reoccur.
My PC is a Dell Dimension E520 running Windows XP Media Center Edition Version 2002, Service Pack 3. It is connected via network cable to my Netgear N600 Wireless Dual Band Gigabit Router model WNDR3700. The printer is connected via wireless to the same router.I too have this problem and for no apparent reason. The only thing I can link it to is, if I print a letter and then go into mail merge to print the envelope it allows me to print the envelope(s) but then loses the wireless connection when I go back into trying to print letters.
It really is a pain because I have to stop what I am doing and spend time going through the set up procedure again. Not difficult (except for the faff of having to take the printer to the pc and connecting the USB again) but time consuming and very disruptive to my working day.
I have another problem with printing a document and getting gobblygook, but that's for another thread and I will search for this. -
Why does the printer turn off after a few hours of sitting idle?
After a few hours of no use the printer (HP 7510-e aAll-in-one series) turns itself off. To print I have to turn the printer on.
Pace,
Have you tried a "DFU" mode restore as new, without restoring from a backup?
If my question leaves you lost let me know and I will explain but essentially it returns your phone to it's "Out of the box condition".
This method has worked for me an many others albeit not everyone. -
I had Windows Xp on the old laptop and used Thunderbird for ages, but have now installed the same version of Thunderbird on a new laptop with windows 8.1 and it is quite different. How can I stop it removing the contents of my inbox after a few hours. Its very frustrating when you dont want to reply to an e mail immediately but lose it overnight!
http://kb.mozillazine.org/Disappearing_mail
-
My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored -
Unable to boot Z10, stuck on loading screen at 99% after a few hours.
Hi, I am unable to boot Z10, stuck on loading screen at 99% after a few hours. I did not try to update, nor load any other OS versions. Running a Bell Canada 10.1. Tried to pull battery, leave phone boot for 5 hours, still stuck on 99%. I tried plugging it in BB Link and computer will not recognize it.
dazedandconfused wrote:
Every option Im seeing is telling me Im going to lose my data... is this true? I know with other phones ppl are able to mount the device as if it were a hard drive and pull content from it... is this not possible with the Z10? Thanks...
I understand you are frustrated and seeking solutions, but please don't double and triple post your inquiry.
I've answered your thread already, here:
Re: Z10 stuck on loading logo on starting up
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
A few thoughts and experiences after a few hours using my new ThinkPad E440 with Win 8.1
After waiting 36 days for my new ThinkPad to arrive, I guess I'm just "eh" about it after using it some. Here are some of my thoughts, opinions, and experiences I've had after using it for a few hours... Hope this helps other people.
I should not be surprised because I read all the reviews, but the touch pad really sucks. I hate everything about it, the way it clicks - it's so loud and clunky! - and it's insensitivity (and I adjusted this to be more sensitive). Thank goodness for the track point. I love that thing.
The touchscreen stopped working after a few hours of use. After I rebooted it came back. Is this a bad omen? Or did I inadvertantly turn it off? Is that even possible? I am new to Windows 8 so anything is possible.
The touch screen, when it's working, is not very responsive. It's MUCH LESS responsive than my Samsung Galaxy Note 2 Android phone or my LG G Pad 8.3 tablet. This is very disappointing.
I ran the hardware scan that is in the Lenovo Solution Center and got a warning under the category "Local Connection Test". I looked at the list of System Events and it's very long. The first application error event name is MpTelemetry. Response is "Not available". The next one is "PnPRequestAdditionalSoftware". Response is "Not available". And the list goes on and on and on for pages. I have no idea what to do about this or what it means.
Also in the Lenovo Solution Center, under Software, there is a Critical Alert that says I never updated Windows. But I did when it prompted me to while it was first booting up and it was updating and installing things. Where it says "To update your operating system, you must run Windows Update", I click on the Launch button and it takes me to Windows Update where it says No Updates are Available. Go figure. It also says there have been 9 Windows updates made to the computer. I guess I'll have to just always ignore that Critical Alert.
In the system tray, it says "ThinkPad OneLink Dock Detached!". I don't have a dock... So, yes, that's true, it is detached. I'll have to hide that one.
I realize there is a Lenovo Recovery Partition on the hard drive but I would really like to create a set of recovery disks before I start customizing this thing, installing apps, and moving my files over. I can't find anything that tells me how to do it. Under the control panel, there is the Recovery icon. The only choice there for creating recovery media is to create a Recovery Drive, not disks. I'll post a separate item to get information on this.
On the positive side, I have had it in my lap the whole time and it's not gotten too hot for my legs. That's a big improvement on my old Toshiba Satellite Pro.
This locating the Fn key to the left of the CTRL key decision must have been made by someone smoking crack. Why would anyone in their right mind want to do this? We've had the CTRL key on the outer left edge like, FOREVER, why move it now?? This will be something that will take me a long time to adjust to - if I ever do. I use the CTRL a lot for cutting, pasting, and formatting things in Excel and Word. It's going to be a battle. I wonder if any software exists that allows you to redefine the keys? Speaking of location of keys, I keep hitting the Page Down key when I want the Page Up key. I'm used to the Page Up key being above the Page Down key instead of to the left.
After being told here in the forum that the fingerprint reader was not an option in the US I am pleasantly surprised to see one on my new ThinkPad.
I use the right-click on my mouse often. For example, to open a link in a new tab instead of switching to the new URL. For some reason, when I click on the right part of the touch pad when the mouse is located over a link, it just opens the new URL instead of giving me options for opening the URL. I'll have to figure this out.
So anyway, I guess that's more than a few things... hope this is useful to someone...You can change FN and CTRL key in the BIOS
-
Iphone 5s - IBM Notes Traveler 9.01 -Unable to move messages to trash after a few hours
I have a problem with one of my Iphone 5s users. Everything was working with his IPhone 4S, but the phone died and so they replaced it with a 5S
We are using an IBM Lotus Notes 9.01 Server (latest FP patch) and Traveler 9.01 FP4 with the iphone 5 s.
On his Iphone 5S we install Notes Traveler... Everything works on it, but after a few hours we not able to delete messages on the IPhone. When he clicks Delete on a message on his Iphone, it comes back saying it is "Unable to Move the message"
If I remove Traveler and reinstall it, he can delete the messages for a few minutes or even a few hours, but then it comes back and says it cannot move the messages when we try to delete the email on the Iphone 5S. The Iphone had 7.1.1 OS... I updated it to latest Apple 7.1.2 OS on it.. Same problem. We also have an AOL account on the Iphone ....that works fine... All other Traveler users on Iphones 4S or 5S users are working Fine...
I had IBM look at it. They did some testing and the email deletions only appeared on the logs when it synchronized to Traveler, but when the problem occurs... it never did show anything in the Notes logs, about the Delete request. They are saying it is an Apple problem.
I even reset his IPhone 5 S to factory defaults and re-setup Notes Traveler and after a few minutes or a few hours... When he deletes a email he gets the Cannot move the messages again. I opened a bug report with Apple by never heard back from them. All other functions of the email work.. He can send and receive emails... He just cannot delete after a few hours. I ran checks on he email database and everything comes up OK...That's odd. You will probably have to contact Apple support on this one. I'm not sure if their is a problem with your account or a server glitch at their end but in either case, they will probably have to look into it for you. You can reach them here: http://www.apple.com/support/icloud/contact/.
-
I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting. -
After a few hours of inactivity, I return to find a white screen with a file folder in the center of the screen with a ? mark in the centre of said folder and both are flashing...am i compromised?
No
Solution may be found if you search in the "More Like This" section over in the right column. -
Mac book pro mid 2009 shuts down after a few hour of use and then is very difficult to reboot. Sometimes I have to wait hours, sometimes I have to repeatedly press the power button and then it will slowly start a little longer each press untill it completely boots. It has done this three times know. Each time I was watching a video.
Try running the Apple Hardware Test - sounds as if you've hardware issues.
Clinton -
Hello!
The camera stops working. Not detected by any program (Facetime, Skype, Hangouts, Zoom). This happens usually after a few hours of work or after the computer sleeps. To make the webcam function again I need to restart.
Any suggestions?Why does that seem likely to be a hardware issue? How did you come to that conclusion? Do you know something about this issue that indicates that? (I realise that this might sound short and rude - I am not trying to be rude here - just to understand) My thought is that conventional troubleshooting would say that this is a software issue because it is fixed with a restart.
I also have this problem. The camera quits working after some time - I have not been able to make it stop working. Sometimes it is after I suspend the computer (close the lid) other times it still works.
All I know is that intermittently my camera stops working and it is a big pain to have to reboot whenever I am going have a video chat.
Anyone got any solutions, I'm not covered by applecare so would rather try and fix it myself if possible?
Maybe you are looking for
-
I used to be able to close firefox and have all my opened tabs saved. When I open firefox again, those tabs will be opened as I last closed firefox. Now, I am not able to do it. The firefox was crashed at one time earlier and I have to open the task
-
Lost my notes after os8 upgrade. How do i get them back?
Lost my notes after OS8 upgrade. How do I get them back? jeff
-
JEditorPane HTMLEditorkit Image align left
Hi, I am developing a HTML Editor with JEditorPane and HTMLEditorKit. Apart from the many other difficulties, the HTMLEditorKit doesn't show a text next to an image correctly. I set an Image alignment to left and hopped, the text would be displayed t
-
Need to sort an object array using an element in the object.
hi all, i need to sort an object array using an element in the object.can someone throw some light on this. Edited by: rageeth on Jun 14, 2008 2:32 AM
-
Oracle Listener / database error
When I try to connect to the database (10g) I get: Oracle Connection Error received : Unable to make conection, ORA-12514: TNS:listerner does not currently know of service requested in connect descriptor. I used it before and it was working fine, I t