My Airprint stopped working after last Mondays update

I have a HP 7510 e all in one printer. After the operating system up date the first part of last week (11/5/12). Have not Ben able to AirPrint. I can select a page to print, find printer, sending to print, but dos not print. Can print from my desk top unit. Tried to airprint whit desk top computer on and off. Checked paper ink power all good.

I too have tried the latest iTunes (12.1.1.4) in Win7. I did a search for latent drivers as you noted but found none. I am glad it worked for you - I'm still no-joy at this point. I'm able to install AMDS over and over again, without issue - it just doesn't start then iTunes launch fails with Error 7. I have to manually remove it.
I am able to connect my iPhone via USB cable and access my photo storage on the phone. I am just not able to install iTunes anymore. I have attempted resolution to this issue for almost two months now. Until that time, I was content with what was installed. It was only when the proverbial update box appeared that I attempted to 'update' my iTunes. WHAT A MISTAKE putting blind faith into an Apple request to update. I SUGGEST NOT TO UPDATE YOUR ITUNES IF IT IS RUNNING PROPERLY!
I realize now, once again I might add, my reliance on software provided by others. It's like anything else, I shouldn't rely on just one method for anything. Time to search for a more pleasant alternative than Apple. Truly, when it worked, it was good at its job, but now that I am wasting time I am looking seriously at upgrading to another type of smartphone and media management software. Way too much trouble for anything as simple as this should be. I wonder, is this a result of another feud with Microsoft?

Similar Messages

Firefox extension: "TrueSuite 5.2.500.16" stopped working after last firefox update (30.0), even though about:plugin says it's enabled. Any fix to make it work?

Firefox extension: "TrueSuite 5.2.500.16" stopped working after last firefox update (30.0), even though about:plugin says it's enabled.
i tried resetting firefox and look for similar problems, unfortunately didn't find anything.
also there's weird blank space before address in address bar
other extensions and addons seem to be running fine.

jscher2000, i tried that, i thought it didnt work before, it's just that this time i accidentally closed (and thus restarted) firefox and it worked, thanks man

Why has flashplayer stopped working after last apple update?

This is very frustrating. I have done everything suggested, uninstall, re-install, empty cache, restart computer, reset safari and still the flashplayer will not work! I had no problem with the flashplayer before the last Apple update and these 'glitches' are begining to make me question Apple!

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 4.
1. If you're getting a "blocked plug-in" error, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch your browser.
2. Triple-click the line below to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu. A folder should open. Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
3. Re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
4. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
5. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
6. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.

JFileChooser stop working after last Java update

I actually program using JDK1.4.2.
My programs worked all ok till last Java update. Now, when I try to create an instance of JFileChooser, programs loop infinitely, causing CPU overall.
Simple program like this:
import javax.swing.*;
public class JFC2 {
    public static void main(String[] args) {
        SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                System.out.println("New instance");
                JFileChooser fileChooser = new JFileChooser();
                System.out.println("This string never appears");
}The string "This string never appears", like its content, never appears.
I found an old bug report about this bug, but it refers to applications lauched by a shortcut. This case is different: the application doesn't work anyway.
Is there any solution? Any information about that?
Thanks a lot.
Edited by: LeleFT on Oct 24, 2007 2:56 AM

Not a Java problem

Administrator password stopped working after last software update

Since last automatic software update (I know have Mac OS X 10.7.5 in my MacBook Pro), when prompted for the administrator password with new software installation or to unlock the "lock" in the system preferences, the following happens: the password is accepted as valid (no error message appears, and the password window dissapears), but nothing happens:
- For new software installation, the "Install" button appears again, and upon pressing it, I get prompted again for administrator password, and the process gets looped into these 2 steps.
- For unlocking the system preferences, the password window gets closed but the preferences are still locked.
It seems that my password is valid, because if I purposedly enter a wrong password it lets me know it is not correct, but it just does not unlock anything or just not get accepted as before!
Now I also see in the tool bar at the top right of the screen my name (I am the administrator and only user, I never created any alternative account), this was not there before.
Can anyone help me to solve this problem, please?
Thanks!!
Monica

I guess I misunderstood your original post. You are logged in, but you can't authenticate as an admin.
Back up all data.
If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but if the password is different from the old one, you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

Norton Anti Virus Live Update stopped working after last system update

Hello,
I am using Anti- Virus version 11 for MAC. It has worked fine for years. Now Live Update will not run.
I have tried reloading and nothing helps. Is anyone experiencing this problem.
Alice

FYI:
Norton Anti-virus software is the worst app to install on a Mac. It will slow down the drive and cause all sorts of system issues. Delete Norton and get ClamXav available here, and it's free:
http://www.clamxav.com/
There are no known Mac virus. If you really think anti-virus software is necessary, then use Clamxav. It can detect a trojan horse and malware both.
Here's a thread that might help you make your mind up: http://discussions.apple.com/thread.jspa?messageID=8330584&#8330584
Carolyn
Message was edited by: Carolyn Samit

Coldfusion 64 bit windows installer stops working after recent microsoft update

Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
My question is at the end.
Trying to deploy coldfusion 9 enterprise 64 bit trial version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
Steps taken (remember, this is all 64 bit):
1. Installed the base OS which was slipstreamed with SP2.
2. Checked w/ microsoft and installed 63 OS updates.
3. Launch the CF9 trial exe.
4. As soon as the first screen finishes (the one that looks like it is extracting files) then the second screen pops up (the one that simply says CF Adobe Coldfusion 9) and the progress bar quickly moves 95% to the right and the install application quits. No error, no nothing. No log file either.
5. After a moment of incredulous silence (and retrying/rebooting, etc), I started to google it. I found nothing. However, I did find a post (thanks dspent!) that was helpful in that it told how he was able to get at a log file of sorts, by pre-extracting the coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand. (Dspent's install snafu was different than mine, but his post was very valuable and got me started in the right direction.)
6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
7. From the windows directory created by step 6, I launched adobe_cf.exe.
8. Same thing (the install application quits. No error, no nothing. No log file either.).
9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
13. Bingo! That install works.
14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
15. Back on the first server (the one with the MS security patches installed and the one that CF won't install on). In the CF file adobe_cf.lax (one of the files extracted in step 6) there is a line that mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
17. Modify a line in adobe_cf.lax :
   before
     lax.nl.current.vm=resource\\jre\\bin\\java.exe
   after
     lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
(that assumes that you let step 16 install to the default location)
Save the file.
18. Run the install ... ** IT WORKS ** !
Obviously, the built in java provided with the CF installer is no longer compatible with some change introduced by some recent MS update on the W2K3 64b SP2 platform.
And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the version of java.exe that is in that directory is the original version, not the newer version I forced the installer to use).
On the surface, CF seems to run OK, but I have not done any application testing yet.
And finally my
** QUESTION **
Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same (close though) so I certainly don't want to break things by doing this, but instinct tells me that if the installer broke using the older version, then something else is gonna break down the road if I don't use the new version. On the other hand, the differences in the directories and files is enough that it makes me very nervous, with my limitied java skill set, to make this decision.
Thanks in advance!!
Byron

Hi Byron,
Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
#java.home=C:/ColdFusion9/runtime/jre
Add new line like so and save jvm.config:
java.home=C:/Program Files/Java/jdk1.6.0_24/jre
Note there the slashes and the location of the JRE (runtime) - you need to point to the one in JDK because the other JRE in C:\Program Files\Java\jre6 will be missing a DLL.
Start CF via SERVICES.msc.
HTH, Carl.

Front and back cameras stopped working after IOS 8 update

My front and back cameras both stopped working after i updated my phone to the IOS 8 software. Does anyone know why this would happen or any way of fixing it?

Hi VictoriaViking,
Not sure why your cameras stopped working with the update, or what the exact symptom is (black screen, no response...), but please check out the Camera troubleshooting section of this article. (I know some don't apply to your issue.)
iPhone: Hardware troubleshooting
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Take care,
Nubz

IWork (Pages) does not work after last system update!

since some days (after last system update) iWork programms are not starting any more!
macosx 10.7.5 new update
solution atemd: cancel p-ram and p-list, re-installing iwork from DVD and update it from http://support.apple.com/kb/DL1563
macbookpro 2.53 ghz intel core 2 duo, 8 gb ram
any body an idea what i can do to fix it?

hi - i think you should not use 'xhost +' - it's not secure and you shouldn't need it....
in your .bashrc or .cshrc or whatever, you should have setenv DISPLAY .0 or the equivalent export...
then ssh -Y hostname should be all you need... no xhost, and not setting DISPLAY every time...
could you enter the following command from a terminal window and post back the results?
grep X11 /etc/ssh*_config
cheers

My Logitech K750 numeric keypad stopped working after last update-numbers only

After the last Mountain Lion update, the number on my numeric keypad will not function. They work for my login, but then become inactive. I have tested the system with an Apple keypad, same thing! What happened? Is there a keyboard setting that needs to be reset?

Dianefromblaine,
Thank you. My K750 number pad stopped working on my iMac. The keyboard and number pad 'do' work on a different Mac, so I suspect it is some setting on the iMac. I did a Safe Mode start, reset the SMC, and repaired the disk permissions. The dongle was plugged into an USB Hub. It is now plugged into the iMac USB port. The keyboard has a 90% charge, but still does not work. Then suddenly it started working again, but stopped after about one month.
I found your "Accessibility>Mouse and Trackpad" suggestion and deselected "Enable Mouse Keys". My number pad works again.
Thanks.

Screen sharing stopped working after last update

Hello all,
I have run software update yesterday, and there were about 10 downloads (I run this weekely, so these must have been new ones). The thing is that after installing all the updates, one of the features that I use more frequently, screen sharing, stopped working properly. I have a Mac Book Pro and an I Mac, both running on Snow Leopard, and screen sharing has always worked just fine, but not after the latest update.
I checked passwords and they are all right, and also checked sharing properties and all seems to be fine. I can share files all right, but for screen sharing now is only possible by setting the option "anyone may request permission to control screen" (under sharing>screen sharing>computer settings) to on, and ask for authorization each time I need to share screens, not good, mainly if you have the computers in different rooms.
Finally, I own an Me account, so I tried sharing screen via Back to my Mac, but it didn't work either.
Can anyone help?
Thanks a lot,
Luis

Problem solved!
After working with Apple, I have an answer. It looks like the 10.10.2 update changed your firewall settings. Try this:
System Preferences>Security and Privacy>Firewall Options
Scroll down the list till you find "screensharingd". If it's marked as block in coming connections, change it to allow incoming connections.
Be sure to reboot your computer and you should be good to go!

Command line option "-save-to-folder" stopped working after last update: Any workaround?

Running FF on Linux, I was using the -save-to-folder option at CLI to write a copy of the webpage to file with JS content rendered. Worked great until the recent update (to v.27.0.1).
Typical format was: firefox url -save-to-folder filename
When things break, the fixes sometimes happen quickly, sometimes not. In the meantime, anyone have a workaround?

[http://ubuntuforums.org/showthread.php?t=2210953&p=12955762#post12955762]?
It will depend if your Linux build was compiled by a third party. Typically if a function like that stops working, uninstalling might be a good option, but maybe not in this case.
The full list are [https://developer.mozilla.org/en-US/docs/Mozilla/Command_Line_Options] is this one custom perhaps?
There is an add on [https://addons.mozilla.org/en-US/firefox/addon/save-file-to/ Save file to] that adds a dialogue, but you may want to stick to linux. There is a customize shortcuts [https://addons.mozilla.org/en-US/firefox/addon/customizable-shortcuts/ add on]
-recording-output may be something you can try. Or make a bug! :-)[bugzilla.mozilla.com]

HP Support Assistant stops working after last update

message says
hpsf.exe has stopped working
HP ENVY 17-2070nr Notebook PC windows 7 64 bit
This question was solved.
View Solution.

Hi,
Try the following
First of all, uninstall your current version of HP Support Assistant by using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues that may prevent reinstallation on machines running a 64bit OS.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
When this has completed, restart the notebook.
Next download and install the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page.
http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
After the installation, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

ITunes stopped working after last update

I got an update for iTunes yesterday. Now when I try to open it I get an error message "iTunes has stopped working" and the program closes. Any clues?

Hi Pam,
Take a look at the article below, it will help you isolate the issue and then provide some suggestions that should resolve it.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
If that doesn't help, just reply with details about what you're seeing.
-Jason

Camera connection kit stopped working after last update

After the recent update to ios 8.1.3 my Apple Camera connection kit has ceased to work, any one got any ideas why and a possible solution?

Is this a genuine Apple-made CCK or a third party one?
Some third party CCKs are not compatible with iOS 8.

My Airprint stopped working after last Mondays update

Similar Messages

Maybe you are looking for