My AMD Catalyst Doesnt Work
My Laptop's AMD catalyst Control Center Doesnt Work. It used to Work But I Accidently Deleted One of the AMD catalyst Files. And then After that I cant use it. I got no Recovery. Everytime I click Configurable graphics. It shows a CLI.exe - Application Error. The exception unknown software exception (0xe0434352) occured in the application at location 0x788d8b9c. I tried Redownloading The AMD catalyst thing with the suitable one But it still doesnt work And happened the same thing again. Anyone can help me solve this problem? I was using AMD Website to download it.
RedCheesecake wrote:
My Laptop's AMD catalyst Control Center Doesnt Work. It used to Work But I Accidently Deleted One of the AMD catalyst Files. And then After that I cant use it. I got no Recovery. Everytime I click Configurable graphics. It shows a CLI.exe - Application Error. The exception unknown software exception (0xe0434352) occured in the application at location 0x788d8b9c. I tried Redownloading The AMD catalyst thing with the suitable one But it still doesnt work And happened the same thing again. Anyone can help me solve this problem? I was using AMD Website to download it.
Means you need to go to your HP driver site and redownload the AMD driver for your O/S and reinstall it again and hopefully this should fix the problem.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-
Similar Messages
-
[SOLVED] AMD Catalyst + Xinerama + Compiz
Compiz + xf86-video-ati = works
Compiz + AMD Catalyst = works
AMD Catalyst + Xinerama = works
all three, no so good.
I believe the issue is related to this:
$ compiz-check
Gathering information about your system...
Distribution: Arch Linux
Desktop environment: Xfce
Graphics chip: Advanced Micro Devices [AMD] nee ATI Barts PRO [Radeon HD 6800 Series]
Driver in use: fglrx
Rendering method: None
Checking if it's possible to run Compiz on your system... [SKIP]
Checking for hardware/setup problems... [SKIP]
At least one check had to be skipped:
Error: No rendering method in use (AIGLX, Xgl or Nvidia)
Any idea how I set a rendering method? I did some research with not much luck.
All the other tests pass:
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: AMD Radeon HD 6800 Series
OpenGL version string: 4.2.11903 Compatibility Profile Context
02:48:57 Mon Oct 22 crrobi01 ~/Desktop
$ lsmod | grep fglrx
fglrx 4606694 143
amd_iommu_v2 7367 1 fglrx
button 4662 1 fglrx
02:49:11 Mon Oct 22 crrobi01 ~/Desktop
$ glxinfo | grep direct
direct rendering: Yes
GL_AMD_multi_draw_indirect, GL_AMD_name_gen_delete,
GL_ARB_draw_indirect, GL_ARB_draw_instanced,
GL_EXT_copy_buffer, GL_EXT_copy_texture, GL_EXT_direct_state_access,
I've already enabled indirect rendering and generated a xorg.conf via
aticonfig --initial=dual-head --screen-layout=left
Of course after creating the xconf I had to use CCC to switch to xinerama. Is xinerama the only way for me to have a single desktop which spans both my monitors (while using the propriety ATI drivers of course)?
After creating xorg.conf I edited it to include
"Section "Extensions"
Option "Composite" "Enable"
EndSection
and
Section "ServerLayout"
Option "AIGLX" "True"
EndSection
and I restarted X.
Solved:
gksu amdcccle
- Disable Xinerama
- Display Manager > Multi-Display > select "Multi-display desktop with display(s) 2"
- Reboot
Last edited by beardedlinuxgeek (2012-10-22 07:18:52)From AMD ATI Control Center I have set GPU to intel in order to save battery life and after restarting arch linux, now the error messages below have disappeared.
Only remaining the warning messages but if they are not harmful, then no problem
libGL error: No matching fbConfigs or visuals found
libGL error: failed to load driver: i965
libGL error: No matching fbConfigs or visuals found
libGL error: failed to load driver: swrast -
FFMPEG screencast is not working for WoW under Wine (AMD Catalyst)
Hi all. I'm trying to record game video using ffmpeg, but each time when I actually switch my focus to the game window, the picture freezes. Here is the example: http://www.youtube.com/watch?v=r4kfKpgcTAE This is World of Warcraft running under wine. I use AMD Catalyst beta-driver from the unofficial repository (mentioned here) on x64 system (lib32-catalyst-utils also installed).
I tried this:
ffmpeg -f x11grab -r 30 -i :0.0 -f alsa -i hw:0,0 -acodec flac -vcodec ffvhuff test.mkv (from wiki)
and some variations I found over the Internet:
ffmpeg -f x11grab -r 30 -i :0.0 -f alsa -i hw:0,0 -acodec flac -vcodec ffvhuff test.mkv
None of them worked.
I guess it's due to driver, because when I tried recordMyDesktop tool a few days ago with xf86-video-ati driver it recorded wideo. But when I switched to proprietary drider, both ffmpeg and recordMyDesktop are not working. I'm not going to change video driver because it's performance in video-games, so I'm wondering if there is any solution to my problem (except windowed-mode!).
Thanks.
Last edited by ghostwolf (2013-07-19 05:02:16)Hi,
I had similar problems when trying to record OpenGL games with FFMpeg CLI. I use the catalyst-test drivers for my AMD HD 6870.
You could try downloading SimpleScreenRecorder via yaourt; get both, including the lib32-simplescreenrecorder.
There will be some conflicts, but choosing to replace some files hasn't caused any problems.
Make sure you have both lib32-libpulse and lib32-alsa-plugins installed (pacman).
Once everything is in set, open SSR (SimpleScreenRecorder); set audio input to:
- Record Microphone
- Backend: PulseAudio
- Source: Monitor of Built-in Audio Analog Stereo
I chose to output as MKV ; H.264 ; MP3 @128
Select Start Recording and fire up WoW. I was able to playback the game-play video (full screen 1920x1080) with audio.
You may need different settings from what I have, notably the audio, but it should record in full screen mode.
Good luck ! -
Is this an airport express problem?? Only Youtube and google doesnt work. Its not work only on wifi from airport express. I really have no idea about technical problem.
After the last upgrade, my itunes doesn't open (this happen only the first time after the start of my pc). It seems frozen.To re-open Itunes i need to terminate APS deamon every time from task manager.
What is Apple doing to solve this problema? Thank you. -
Dear all,
I ahve a Lenovo G10 laptop, which has an AMD RADEON R5 M230 graphic card. I have downloaded the linux drivers AMD Catalyst for my OS (Linux mint 17.1) from their site but when I start the installation process said that "hardware doesnt support the drivers". If anyone has a solution let me knowIt's up to you to decide wheter it's enough or not ! If it works for you...
As mentioned above you can use vgaswitcheroo to verify. For this you need to enable _early_ KMS. (Forgot the _early_ in above post.)
What would be the advantage?
Please learn to use the wiki etc. for your own research before asking! https://wiki.archlinux.org/index.php/ke … de_setting
Don't forget to mark the thread solved, when this issue is resolved.[1]
Regards
[1] Edit: I meant the basic issue from your title. The thing is, I think, we try to have one issue per thread. Feel free to open another thread, when another problem/question arises (Of course after searching and trying hard to solve it by yourself first ).
Last edited by rebootl (2014-03-10 19:48:38) -
MSI GF4 Ti-4200 doesnt work with WindowsXP
I can't get the MSI display tools to work - it crashes,
the vbios.dll doesnt load, it also crashes.
the tv in doesnt work ,it crashes
the tv out doesnt work ,it crashes.
all the supplied software also crashes "application has encountered an error and cannot continue. sorry for any inconvenience"
the intervideo software (windvr, wincoder, winproducer) and MSI PVI software all crashes as well.
what's the deal with this stuff? ?(
I have a Dual AMD athlon Tyan thunder k7 motherboard,
MSI Ti-4200-VTD video card and MSI tv anywhere card.
is there any resolution for this?I'm sorry gfilitti if I don't have my system listed, but I thought my question was pretty simple...
Has ANYONE been able to make the InterVideo WinProducer 2 software, that comes with the retail version of the MSI G4Ti4200-VTD64 card, work successfully under the Windows XP Home or Pro operating system?
If the answer is YES, then I will begin investigating why my system can't.
If the answer is NO, then I only ask for other people's recommendations of what software WILL work in place of that. I NEED those functions to work. That's why I paid extra for the VIVO.
All we've heard so far in this thread are NO votes. I would like to see just how widespread this is. If I can find ONE person who claims it works fine on his/her computer under Windows XP, then my NEXT question would be if they had to do anything different to make it run, or was it just a straight install? Did they add the program patch available from the MSI website? See where I'm going with this?
If you would REALLY like my system details, here ya go...
========================================
CASE - ANTEC SX1000II with 4 internal 8cm fans
POWER SUPPLY - ANTEC 400W "True Power" w/dual fans
MOTHERBOARD - MSI 645E MAX (MS-6547 Ver 2.0)
BIOS - AMI Ver 3.2 (10/21/02)
PROCESSOR - PENTIUM 4 2.0aGHz (Rev/Step 2/4(9) )
MEMORY - 1 Corsair 512MB DDR RAM (Winbond chips)
DISABLED IN CMOS - FLOPPY Controller, AUDIO Device, MODEM Device, Serial Port B, MIDI Port, and GAME Port
AGP SLOT - MSI G4Ti4200-VTD64 - IRQ 16
DRIVER: MSI 31.00
CAPTURE DRIVER - nVidia 1.08
SLOT 1 - Creative SB0090 Audigy Sound Blaster - IRQ 17
DRIVER - Creative 3.0.0.18 9/20/02
SLOT 1 - Creative SB1394 FireWire Controller - IRQ 18
DRIVER - MS 5.1.2535.0 7/1/01
SLOT 2 - NIC #1 D-Link DFE-530TX Ethernet - IRQ 18 (LAN)
DRIVER - REALTEK RTL8139 5.396.0530.2001
SLOT 3 - Adaptec 29160N Ultra160 SCSI Controller - IRQ 19
DRIVER - Adaptec 6.2.0.0 3/19/2002
SLOT 4 - EMPTY
SLOT 5 - MSI SYSTEM D-Bracket
SLOT 6 - NIC #2 NetGear FA312 Ethernet - IRQ 18
DRIVER - Windows XP Pro native driver
NOTE:
NIC #1 is for home LAN
NIC #2 is for Alcatel SpeedTouch External DSL modem
SCSI DRIVES:
ID 0 - COMPAQ (Seagate) ST318451LW, 18GB, 15K RPM
ID 1 - QUANTUM Typhoon Atlas II, 18GB, 10K RPM
ID 2 - Seagate ST39103LW, 9G, 10K RPM
ID 3 - Plextor CD-RW PX-W1219S
ID 4 - Toshiba DVD-ROM SD-M1201
ID 5 - EPSON Perfection 1640SU Flatbed Scanner
ATA/ATAPI DRIVES:
Primary Master - No Connection
Primary Slave - No Connection
Secondary Master - MATSHITA LS-120 Ver F523
Secondary Slave - No Connection
USB DEVICES:
DIAMOND SupraMAX 56K V.92 Model:SUP2920
Generic Flash Memory programmer and other assorted USB devices on occasion.
MONITOR - HITACHI SuperScan Pro 21 w/5-BNC input
========================================
BTW, I would think when investigating a program's FLAT refusal to run, that the MOST important things aren't listed in these signature files. It has to do with what ELSE is running at the same time. Which services are running and which are NOT? What memory resident programs are loaded at boot-up? Any service packs installed? How about any security patches from Microsoft? Which anti-virus software (if any)? Which DirectX version? Personal firewall? Etc., etc.
Granted, the hardware DOES have a factor, but I feel all of these are MORE important factors than the speed or brand of a persons hardware. I look at the signitures more as bragging rights than anything else.
Now, this is just my opinion and may not reflect the feelings of the more sane people around me.
Cheers! -
Amd catalyst & built-in display driver clash
Hello,
I have a core i5 HP pavilion dv6 entertainment notebook pc with the following specs:
Processor: 2.53Ghz
RAM: 8 Gb
Operating system: Win 7 x64
AMD Radeon HD 6500M/5600/5700 Series: 1 GB
System Model: 3141se
I had a recovery partition on my laptop but a while back when I tried to run it, I kept on getting the same error message " your partition is of GPT style or something like that" and I had to wipe the whole drive and tried recovering from the backup DVDs, without any luck.
Having said that, I installed another copy of Win 7 with the original key provided and it was working fine. A couple of days back I installed a fresh copy of windows and now the problem I am facing is something like that:
Built-in intel display and AMD display driver installs, but I dont see anything in adapter section. Which means no graphics card is installed. When ever I install AMD catalyst driver, my windows turn black and stay that way forever (even though windows in running normally).
Whenever I disable built-in display driver from "device manager" it works fine. But I have had no luck installing AMD catalyst control, I tried literally every version available.
Kindly, help me fix this issue. My Laptop is a crap without the graphics card.
quick help would be appreciated.
Thank youUse the recovery media to install the AMD graphics driver softpaq.
Choose the AMD video graphics softpaq from the list that appears. The following image is an example from a former HP product loan I was provided by HP. What you see will be a bit different since the notebooks are not in the same model range.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
[AMD Catalyst] problem with "major" file
Hi, I'm using now the free driver xf86-video-ati for my [Radeon 9200 SE] card, and for several reasons, I want to switch to the proprietary driver, Catalyst.
I followed all the steps of the wiki, but when I "startx", it display:
ukiDynamicMajor = failed to open /proc/ati/major
I would precise that the command "modprobe fglrx" says "fglrx is not a valid expression". I hesitated to use aticonfig, but people say that creating one xorg.cong is bad; thus I have deleted this option.
What I have done:
pacman -S catalyst-hook catalyst-utils catalyst-libgl opencl-catalyst (install succeed)
pacman -R xf86-video-intel xf86-input-evdev (uninstall succeed exept for xf86-input-evdev because of his dependence on xorg-server)
modprobe fglrx (doesn't work)
touch /etc/modules-load.d/catalyst.conf (the file already exist)
less /etc/modules-load.d/catalyst.conf ("fglrx")
touch /etc/X11/xorg-conf.d/20-catalyst.conf
nano /etc/X11/xorg-conf.d/20-catalyst.conf
[quote]
Section "Device"
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BusID "PCI:1:00:1"
EndSection
[/quote]
rnmod radeon (doesn't work => rnmod is not a valid program)
touch /etc/modprobe.d/radeon_blacklist (sucessful)
echo /etc/modprobe.d/radeon_blacklist "blacklist radeon"( sucessful)
Config:
uname -a
Linux archlinux-desktop 3.14.3-1-ARCH #1 SMP PREEMPT Tue May 6 22:45:18 CEST 2014 i686 GNU/Linux
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 51)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] LPC Controller (rev 14)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2/3 SMBus controller
00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)
00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.2 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (rev 01)
01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (Secondary) (rev 01)
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.3-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.0 (GCC) ) #1 SMP PREEMPT Tue May 6 22:45:18 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001fff0000-0x000000001fff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000001fff3000-0x000000001fffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Packard Bell NEC 00000000000000000000000, BIOS F2 10/15/2003
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CAFFF write-protect
[ 0.000000] CB000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 0D0000000 mask FF8000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5370-0x000f537f] mapped at [c00f5370]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x1f800000-0x1fbfffff]
[ 0.000000] [mem 0x1f800000-0x1fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x18000000-0x1f7fffff]
[ 0.000000] [mem 0x18000000-0x1f7fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x17ffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x17ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1fc00000-0x1ffeffff]
[ 0.000000] [mem 0x1fc00000-0x1ffeffff] page 4k
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1efe2000-0x1f302fff]
[ 0.000000] ACPI: RSDP 000f7520 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 1fff3000 00002C (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: FACP 1fff3040 000074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: DSDT 1fff30c0 003104 (v01 GBT AWRDACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 1fff0000 000040
[ 0.000000] ACPI: APIC 1fff6200 000068 (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fff0000
[ 0.000000] low ram: 0 - 1fff0000
[ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x1ffeffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1ffeffff]
[ 0.000000] On node 0 totalpages: 130958
[ 0.000000] free_area_init_node: node 0, pgdat c15fc600, node_mem_map dfbf0020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 126960 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @dfbd0000 s33792 r0 d23552 u57344
[ 0.000000] pcpu-alloc: s33792 r0 d23552 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129934
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=14bd8feb-04a9-4b92-b3cb-798729208c52 rw quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1048440 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 507120K/523832K available (4446K kernel code, 470K rwdata, 1280K rodata, 568K init, 956K bss, 16712K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc160f000 - 0xc169d000 ( 568 kB)
.data : 0xc1457c92 - 0xc160eb40 (1755 kB)
.text : 0xc1000000 - 0xc1457c92 (4447 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=df408000 soft=df40a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2625.859 MHz processor
[ 0.003353] Calibrating delay loop (skipped), value calculated using timer frequency.. 5253.53 BogoMIPS (lpj=8752863)
[ 0.003360] pid_max: default: 32768 minimum: 301
[ 0.003378] ACPI: Core revision 20131218
[ 0.008679] ACPI: All ACPI Tables successfully acquired
[ 0.010020] Security Framework initialized
[ 0.010032] Yama: becoming mindful.
[ 0.010064] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.010069] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.010456] Initializing cgroup subsys memory
[ 0.010473] Initializing cgroup subsys devices
[ 0.010478] Initializing cgroup subsys freezer
[ 0.010482] Initializing cgroup subsys net_cls
[ 0.010485] Initializing cgroup subsys blkio
[ 0.010546] CPU0: Hyper-Threading is disabled
[ 0.010555] mce: CPU supports 4 MCE banks
[ 0.010568] CPU0: Thermal monitoring enabled (TM1)
[ 0.010592] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[ 0.018898] ftrace: allocating 18912 entries in 37 pages
[ 0.026857] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027167] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062643] smpboot: CPU0: Intel(R) Celeron(R) CPU 2.60GHz (fam: 0f, model: 02, stepping: 09)
[ 0.063333] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.063333] ... version: 0
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 18
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 0000007fffffffff
[ 0.063333] ... fixed-purpose events: 0
[ 0.063333] ... event mask: 000000000003ffff
[ 0.076710] x86: Booted up 1 node, 1 CPUs
[ 0.076719] smpboot: Total of 1 processors activated (5253.53 BogoMIPS)
[ 0.077148] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.077427] devtmpfs: initialized
[ 0.077889] PM: Registering ACPI NVS region [mem 0x1fff0000-0x1fff2fff] (12288 bytes)
[ 0.079963] pinctrl core: initialized pinctrl subsystem
[ 0.080103] RTC time: 16:19:41, date: 05/12/14
[ 0.080222] NET: Registered protocol family 16
[ 0.080459] cpuidle: using governor ladder
[ 0.080464] cpuidle: using governor menu
[ 0.080574] ACPI: bus type PCI registered
[ 0.080581] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.092329] PCI: PCI BIOS revision 2.10 entry at 0xfb1c0, last bus=1
[ 0.092335] PCI: Using configuration type 1 for base access
[ 0.093965] bio: create slab <bio-0> at 0
[ 0.094273] ACPI: Added _OSI(Module Device)
[ 0.094279] ACPI: Added _OSI(Processor Device)
[ 0.094282] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.094286] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.098161] ACPI: Interpreter enabled
[ 0.098184] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[ 0.098193] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[ 0.098216] ACPI: (supports S0 S3 S4 S5)
[ 0.098220] ACPI: Using IOAPIC for interrupt routing
[ 0.098299] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.098438] ACPI: No dock devices found.
[ 0.108047] ACPI: \_PR_.CPU1: failed to get CPU APIC ID.
[ 0.108184] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.108198] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.108210] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.108371] acpi PNP0A03:00: host bridge window [io 0x0000-0x047f] (ignored)
[ 0.108378] acpi PNP0A03:00: host bridge window [io 0x0490-0x0cf7] (ignored)
[ 0.108381] acpi PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored)
[ 0.108385] acpi PNP0A03:00: host bridge window [io 0x1100-0xffff] (ignored)
[ 0.108389] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.108393] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[ 0.108397] PCI: root bus 00: using default resources
[ 0.108402] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.108726] PCI host bridge to bus 0000:00
[ 0.108736] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.108741] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.108746] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.108768] pci 0000:00:00.0: [1039:0648] type 00 class 0x060000
[ 0.108783] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff]
[ 0.109012] pci 0000:00:01.0: [1039:0003] type 01 class 0x060400
[ 0.109196] pci 0000:00:02.0: [1039:0008] type 00 class 0x060100
[ 0.109281] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.109447] pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500
[ 0.109507] pci 0000:00:02.1: reg 0x20: [io 0x1400-0x141f]
[ 0.109684] pci 0000:00:02.3: [1039:7007] type 00 class 0x0c0010
[ 0.109711] pci 0000:00:02.3: reg 0x10: [mem 0xeb000000-0xeb000fff]
[ 0.109771] pci 0000:00:02.3: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.109811] pci 0000:00:02.3: supports D1 D2
[ 0.109815] pci 0000:00:02.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.110016] pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
[ 0.110085] pci 0000:00:02.5: reg 0x20: [io 0xf000-0xf00f]
[ 0.110284] pci 0000:00:02.6: [1039:7013] type 00 class 0x070300
[ 0.110311] pci 0000:00:02.6: reg 0x10: [io 0xd000-0xd0ff]
[ 0.110325] pci 0000:00:02.6: reg 0x14: [io 0xd400-0xd47f]
[ 0.110410] pci 0000:00:02.6: supports D1 D2
[ 0.110414] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.110506] pci 0000:00:02.6: System wakeup disabled by ACPI
[ 0.110605] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
[ 0.110631] pci 0000:00:02.7: reg 0x10: [io 0xd800-0xd8ff]
[ 0.110645] pci 0000:00:02.7: reg 0x14: [io 0xdc00-0xdc7f]
[ 0.110730] pci 0000:00:02.7: supports D1 D2
[ 0.110734] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.110907] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[ 0.110929] pci 0000:00:03.0: reg 0x10: [mem 0xeb001000-0xeb001fff]
[ 0.111078] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.111177] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[ 0.111199] pci 0000:00:03.1: reg 0x10: [mem 0xeb002000-0xeb002fff]
[ 0.111356] pci 0000:00:03.1: System wakeup disabled by ACPI
[ 0.111454] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
[ 0.111475] pci 0000:00:03.2: reg 0x10: [mem 0xeb003000-0xeb003fff]
[ 0.111623] pci 0000:00:03.2: System wakeup disabled by ACPI
[ 0.111734] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[ 0.111760] pci 0000:00:03.3: reg 0x10: [mem 0xeb004000-0xeb004fff]
[ 0.111850] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.112045] pci 0000:00:0f.0: [10ec:8139] type 00 class 0x020000
[ 0.112070] pci 0000:00:0f.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.112083] pci 0000:00:0f.0: reg 0x14: [mem 0xeb005000-0xeb0050ff]
[ 0.112169] pci 0000:00:0f.0: supports D1 D2
[ 0.112173] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold
[ 0.112437] pci 0000:01:00.0: [1002:5964] type 00 class 0x030000
[ 0.112464] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[ 0.112476] pci 0000:01:00.0: reg 0x14: [io 0xc000-0xc0ff]
[ 0.112488] pci 0000:01:00.0: reg 0x18: [mem 0xe9000000-0xe900ffff]
[ 0.112521] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.112565] pci 0000:01:00.0: supports D1 D2
[ 0.112661] pci 0000:01:00.1: [1002:5d44] type 00 class 0x038000
[ 0.112682] pci 0000:01:00.1: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.112695] pci 0000:01:00.1: reg 0x14: [mem 0xe9010000-0xe901ffff]
[ 0.112764] pci 0000:01:00.1: supports D1 D2
[ 0.112888] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.112896] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.112904] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.112910] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff pref]
[ 0.112924] pci_bus 0000:00: on NUMA node 0
[ 0.113106] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.113252] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.113436] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.113579] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.113723] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.113876] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.114026] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.114178] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.114969] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.115202] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.115209] vgaarb: loaded
[ 0.115211] vgaarb: bridge control possible 0000:01:00.0
[ 0.115301] PCI: Using ACPI for IRQ routing
[ 0.115309] PCI: pci_cache_line_size set to 64 bytes
[ 0.115368] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.115373] e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff]
[ 0.115616] NetLabel: Initializing
[ 0.115622] NetLabel: domain hash size = 128
[ 0.115624] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.115655] NetLabel: unlabeled traffic allowed by default
[ 0.115740] Switched to clocksource refined-jiffies
[ 0.129136] pnp: PnP ACPI init
[ 0.129177] ACPI: bus type PNP registered
[ 0.129597] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.130147] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.130157] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.130162] system 00:01: [io 0x0800-0x0805] has been reserved
[ 0.130170] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.130207] pnp 00:02: [dma 4]
[ 0.130277] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.130404] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.130503] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.130621] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.130910] pnp 00:06: [dma 2]
[ 0.131028] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.131556] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.132089] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.132675] pnp 00:09: [dma 3]
[ 0.132810] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.133009] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.133074] pnp: PnP ACPI: found 11 devices
[ 0.133080] ACPI: bus type PNP unregistered
[ 0.174911] Switched to clocksource acpi_pm
[ 0.174951] pci 0000:00:02.3: BAR 6: assigned [mem 0x20000000-0x2001ffff pref]
[ 0.174962] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
[ 0.174969] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.174975] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.174983] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.174989] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff pref]
[ 0.174999] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.175003] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.175007] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.175010] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe9ffffff]
[ 0.175013] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff pref]
[ 0.175076] NET: Registered protocol family 2
[ 0.175437] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.175457] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.175477] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.175521] TCP: reno registered
[ 0.175531] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.175541] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.175688] NET: Registered protocol family 1
[ 0.397112] pci 0000:01:00.0: Boot video device
[ 0.397124] PCI: CLS 32 bytes, default 64
[ 0.397238] Unpacking initramfs...
[ 0.517648] Freeing initrd memory: 3204K (defe2000 - df303000)
[ 0.517809] apm: BIOS not found.
[ 0.517886] Scanning for low memory corruption every 60 seconds
[ 0.518572] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.533762] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.536896] zbud: loaded
[ 0.537090] VFS: Disk quotas dquot_6.5.2
[ 0.537200] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.537623] msgmni has been set to 996
[ 0.537789] Key type big_key registered
[ 0.538268] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.538390] io scheduler noop registered
[ 0.538397] io scheduler deadline registered
[ 0.538493] io scheduler cfq registered (default)
[ 0.538712] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.538757] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.538862] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.538866] vesafb: scrolling: redraw
[ 0.538870] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.539366] vesafb: framebuffer at 0xd8000000, mapped to 0xe0800000, using 5120k, total 5120k
[ 0.646493] Console: switching to colour frame buffer device 160x64
[ 0.753177] fb0: VESA VGA frame buffer device
[ 0.753268] GHES: HEST is not enabled!
[ 0.753308] isapnp: Scanning for PnP cards...
[ 1.066034] isapnp: No Plug & Play device found
[ 1.066191] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.086839] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.107535] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.108786] rtc_cmos 00:03: RTC can wake from S4
[ 1.109049] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.109090] rtc_cmos 00:03: alarms up to one year, 242 bytes nvram
[ 1.109177] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.109384] TCP: cubic registered
[ 1.109696] NET: Registered protocol family 10
[ 1.110235] NET: Registered protocol family 17
[ 1.110539] Using IPI No-Shortcut mode
[ 1.110887] registered taskstats version 1
[ 1.111374] Magic number: 14:861:337
[ 1.111396] tty tty58: hash matches
[ 1.111477] rtc_cmos 00:03: setting system clock to 2014-05-12 16:19:42 UTC (1399911582)
[ 1.111561] PM: Hibernation image not present or could not be loaded.
[ 1.112337] Freeing unused kernel memory: 568K (c160f000 - c169d000)
[ 1.112374] Write protecting the kernel text: 4448k
[ 1.112407] Write protecting the kernel read-only data: 1284k
[ 1.132515] random: systemd-tmpfile urandom read with 0 bits of entropy available
[ 1.140455] systemd-udevd[40]: starting version 212
[ 1.240350] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.240356] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.240605] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.249861] Floppy drive(s): fd0 is 1.44M
[ 1.263944] FDC 0 is a post-1991 82077
[ 1.295454] SCSI subsystem initialized
[ 1.312358] ACPI: bus type USB registered
[ 1.312456] usbcore: registered new interface driver usbfs
[ 1.312497] usbcore: registered new interface driver hub
[ 1.316781] usbcore: registered new device driver usb
[ 1.317900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.318313] ehci-pci: EHCI PCI platform driver
[ 1.319280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.319680] ohci-pci: OHCI PCI platform driver
[ 1.327015] libata version 3.00 loaded.
[ 1.363547] firewire_ohci 0000:00:02.3: added OHCI v1.0 device as card 0, 4 IR + 6 IT contexts, quirks 0x0
[ 1.364218] ehci-pci 0000:00:03.3: EHCI Host Controller
[ 1.364240] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
[ 1.364332] ehci-pci 0000:00:03.3: irq 23, io mem 0xeb004000
[ 1.373423] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[ 1.373943] hub 1-0:1.0: USB hub found
[ 1.373981] hub 1-0:1.0: 6 ports detected
[ 1.375001] ohci-pci 0000:00:03.0: OHCI PCI host controller
[ 1.375023] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 1.375100] ohci-pci 0000:00:03.0: irq 20, io mem 0xeb001000
[ 1.429251] hub 2-0:1.0: USB hub found
[ 1.429296] hub 2-0:1.0: 2 ports detected
[ 1.429636] pata_sis 0000:00:02.5: version 0.5.2
[ 1.429683] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
[ 1.437030] scsi0 : pata_sis
[ 1.443413] scsi1 : pata_sis
[ 1.443626] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.443633] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.444146] ohci-pci 0000:00:03.1: OHCI PCI host controller
[ 1.444168] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 1.444242] ohci-pci 0000:00:03.1: irq 21, io mem 0xeb002000
[ 1.453047] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.499191] hub 3-0:1.0: USB hub found
[ 1.499232] hub 3-0:1.0: 2 ports detected
[ 1.499756] ohci-pci 0000:00:03.2: OHCI PCI host controller
[ 1.499778] ohci-pci 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 1.499856] ohci-pci 0000:00:03.2: irq 22, io mem 0xeb003000
[ 1.520042] tsc: Refined TSC clocksource calibration: 2625.851 MHz
[ 1.552850] hub 4-0:1.0: USB hub found
[ 1.552893] hub 4-0:1.0: 2 ports detected
[ 1.603787] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 1.603796] ata1.00: 160086528 sectors, multi 16: LBA
[ 1.617092] ata1.00: configured for UDMA/133
[ 1.617362] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
[ 1.733392] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 1.861345] hub 1-4:1.0: USB hub found
[ 1.861759] hub 1-4:1.0: 4 ports detected
[ 1.863604] firewire_core 0000:00:02.3: created device fw0: GUID 00000d610024cc70, S400
[ 1.906938] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0017, max UDMA/66
[ 1.906951] ata2.01: ATAPI: LITE-ON DVD+RW LDW-401S, E9S3, max UDMA/33
[ 1.920261] ata2.00: configured for UDMA/66
[ 1.933596] ata2.01: configured for UDMA/33
[ 1.942307] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8162B 0017 PQ: 0 ANSI: 5
[ 1.943253] scsi 1:0:1:0: CD-ROM LITE-ON DVD+RW LDW-401S E9S3 PQ: 0 ANSI: 5
[ 1.968652] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 1.968905] sd 0:0:0:0: [sda] Write Protect is off
[ 1.968913] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.969022] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.979035] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.979044] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.979566] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.991510] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.991993] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 2.009048] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 2.010569] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.143550] usb 2-1: new low-speed USB device number 2 using ohci-pci
[ 2.345412] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.358710] usbcore: registered new interface driver usbhid
[ 2.358717] usbhid: USB HID core driver
[ 2.361517] input: HID 04d9:048e as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/0003:04D9:048E.0001/input/input1
[ 2.361837] hid-generic 0003:04D9:048E.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:03.0-1/input0
[ 2.407135] usb 1-4.4: new high-speed USB device number 4 using ehci-pci
[ 2.500521] usb-storage 1-4.4:1.0: USB Mass Storage device detected
[ 2.500774] scsi2 : usb-storage 1-4.4:1.0
[ 2.502128] usbcore: registered new interface driver usb-storage
[ 2.520155] Switched to clocksource tsc
[ 3.175339] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.505428] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
[ 3.507279] sd 2:0:0:0: [sdb] 15273600 512-byte logical blocks: (7.82 GB/7.28 GiB)
[ 3.508020] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.508029] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3.508769] sd 2:0:0:0: [sdb] No Caching mode page found
[ 3.509434] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.513361] random: nonblocking pool is initialized
[ 3.514387] sd 2:0:0:0: [sdb] No Caching mode page found
[ 3.515049] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.517301] sdb: sdb1 sdb2
[ 3.520401] sd 2:0:0:0: [sdb] No Caching mode page found
[ 3.521391] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.522153] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 3.928631] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 3.929099] systemd[1]: Detected architecture 'x86'.
[ 3.937340] systemd[1]: Set hostname to <archlinux-desktop>.
[ 5.174046] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.175398] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.175650] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.175707] systemd[1]: Starting Remote File Systems.
[ 5.175758] systemd[1]: Reached target Remote File Systems.
[ 5.175820] systemd[1]: Starting Encrypted Volumes.
[ 5.175867] systemd[1]: Reached target Encrypted Volumes.
[ 5.175954] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.176267] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.176359] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.176504] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.176555] systemd[1]: Starting Swap.
[ 5.176602] systemd[1]: Reached target Swap.
[ 5.176652] systemd[1]: Expecting device dev-disk-by\x2duuid-4e223aa4\x2d3894\x2d41bc\x2db82c\x2d955ae89b3eb2.device...
[ 5.176796] systemd[1]: Expecting device dev-disk-by\x2duuid-b7ca07ac\x2d5ceb\x2d40d6\x2db55c\x2ded651e31f452.device...
[ 5.176850] systemd[1]: Starting Root Slice.
[ 5.208364] systemd[1]: Created slice Root Slice.
[ 5.208422] systemd[1]: Starting User and Session Slice.
[ 5.209187] systemd[1]: Created slice User and Session Slice.
[ 5.209244] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.209403] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.209451] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.209585] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.209635] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.209740] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.209789] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.209917] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.209982] systemd[1]: Starting udev Kernel Socket.
[ 5.210180] systemd[1]: Listening on udev Kernel Socket.
[ 5.210249] systemd[1]: Starting udev Control Socket.
[ 5.210366] systemd[1]: Listening on udev Control Socket.
[ 5.210428] systemd[1]: Starting Journal Socket.
[ 5.210621] systemd[1]: Listening on Journal Socket.
[ 5.210717] systemd[1]: Starting System Slice.
[ 5.211489] systemd[1]: Created slice System Slice.
[ 5.211583] systemd[1]: Started File System Check on Root Device.
[ 5.211623] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.212405] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.212459] systemd[1]: Mounting Temporary Directory...
[ 5.239615] systemd[1]: Starting system-getty.slice.
[ 5.240697] systemd[1]: Created slice system-getty.slice.
[ 5.240838] systemd[1]: Mounting Debug File System...
[ 5.279740] systemd[1]: Started Load Kernel Modules.
[ 5.296122] systemd[1]: Starting Apply Kernel Variables...
[ 5.297870] systemd[1]: Starting Setup Virtual Console...
[ 5.299634] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.301446] systemd[1]: Mounting Configuration File System...
[ 5.344473] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.346155] systemd[1]: Mounted FUSE Control File System.
[ 5.346271] systemd[1]: Mounting Huge Pages File System...
[ 5.370976] systemd[1]: Starting Set Up Additional Binary Formats...
[ 5.372655] systemd[1]: Starting udev Coldplug all Devices...
[ 5.374485] systemd[1]: Starting Journal Service...
[ 5.376393] systemd[1]: Started Journal Service.
[ 5.926924] systemd-udevd[120]: starting version 212
[ 6.249395] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 7.438155] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 7.438167] ACPI: Power Button [PWRB]
[ 7.438350] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.438360] ACPI: Power Button [PWRF]
[ 7.585684] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.625549] parport_pc 00:09: reported by Plug and Play ACPI
[ 7.625639] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 7.658989] Linux agpgart interface v0.103
[ 7.722256] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1400
[ 7.809304] [drm] Initialized drm 1.1.0 20060810
[ 7.958917] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 7.958969] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 7.980566] mousedev: PS/2 mouse device common for all mice
[ 7.980931] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 7.984132] 8139too 0000:00:0f.0 eth0: RealTek RTL8139 at 0xe1724000, 00:0d:61:22:1d:3c, IRQ 16
[ 7.985877] agpgart-sis 0000:00:00.0: SiS chipset [1039/0648]
[ 8.016252] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 8.116064] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.251837] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x11
[ 8.261786] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 8.279526] [drm] radeon kernel modesetting enabled.
[ 8.279631] checking generic (d8000000 500000) vs hw (d8000000 8000000)
[ 8.279639] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 8.279680] Console: switching to colour dummy device 80x25
[ 8.301981] [drm] initializing kernel modesetting (RV280 0x1002:0x5964 0x1458:0x4032).
[ 8.302015] [drm] register mmio base: 0xE9000000
[ 8.302018] [drm] register mmio size: 65536
[ 8.302188] agpgart-sis 0000:00:00.0: AGP 3.5 bridge
[ 8.302214] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 8.302220] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
[ 8.313685] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 8.313704] radeon 0000:01:00.0: GTT: 128M 0xD0000000 - 0xD7FFFFFF
[ 8.313711] [drm] Generation 2 PCI interface, using max accessible memory
[ 8.313718] radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (128M used)
[ 8.313742] [drm] Detected VRAM RAM=128M, BAR=128M
[ 8.313746] [drm] RAM width 64bits DDR
[ 8.318743] [TTM] Zone kernel: Available graphics memory: 255446 kiB
[ 8.318750] [TTM] Initializing pool allocator
[ 8.318762] [TTM] Initializing DMA pool allocator
[ 8.318815] [drm] radeon: 128M of VRAM memory ready
[ 8.318821] [drm] radeon: 128M of GTT memory ready.
[ 8.321257] radeon 0000:01:00.0: WB disabled
[ 8.321270] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xe07fe000
[ 8.321276] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.321278] [drm] Driver supports precise vblank timestamp query.
[ 8.321311] [drm] radeon: irq initialized.
[ 8.321340] [drm] Loading R200 Microcode
[ 8.337126] ppdev: user-space parallel port driver
[ 8.350382] [drm] radeon: ring at 0x00000000D0001000
[ 8.350414] [drm] ring test succeeded in 1 usecs
[ 8.350728] [drm] ib test succeeded in 0 usecs
[ 8.351298] [drm] Radeon Display Connectors
[ 8.351305] [drm] Connector 0:
[ 8.351307] [drm] VGA-1
[ 8.351311] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 8.351313] [drm] Encoders:
[ 8.351315] [drm] CRT1: INTERNAL_DAC1
[ 8.351317] [drm] Connector 1:
[ 8.351319] [drm] SVIDEO-1
[ 8.351321] [drm] Encoders:
[ 8.351322] [drm] TV1: INTERNAL_DAC2
[ 8.481905] [drm] fb mappable at 0xD8040000
[ 8.481912] [drm] vram apper at 0xD8000000
[ 8.481914] [drm] size 8294400
[ 8.481916] [drm] fb depth is 24
[ 8.481918] [drm] pitch is 7680
[ 8.482299] fbcon: radeondrmfb (fb0) is primary device
[ 8.535240] Console: switching to colour frame buffer device 240x67
[ 8.614028] systemd-udevd[135]: renamed network interface eth0 to enp0s15
[ 8.614028] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 8.614034] radeon 0000:01:00.0: registered panic notifier
[ 8.614052] [drm] Initialized radeon 2.37.0 20080528 for 0000:01:00.0 on minor 0
[ 9.523376] intel8x0_measure_ac97_clock: measured 52701 usecs (2535 samples)
[ 9.523383] intel8x0: clocking to 48000
[ 10.264223] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 10.529887] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 10.688972] systemd-journald[112]: Received request to flush runtime journal from PID 1
[ 11.588053] 8139too 0000:00:0f.0 enp0s15: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 130.919975] ISO 9660 Extensions: RRIP_1991A
[ 1052.318149] perf samples too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
[ 2771.015182] systemd[1]: Starting Journal Service...
[ 2773.625872] systemd-journald[112]: Received SIGTERM from PID 1 (systemd).
[ 2773.907874] systemd[1]: Unit systemd-journald.service entered failed state.
[ 2773.921616] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
[ 2773.922423] systemd[1]: Stopping Journal Service...
[ 2773.922521] systemd[1]: Starting Journal Service...
[ 2773.924633] systemd[1]: Started Journal Service.
[ 2774.243766] systemd-journald[860]: Received request to flush runtime journal from PID 1
[ 2848.068160] perf samples too long (5003 > 4990), lowering kernel.perf_event_max_sample_rate to 25200
[ 2932.591054] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 2932.591064] Disabling lock debugging due to kernel taint
[ 2932.632805] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
[ 2932.633428] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[ 2932.633438] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
[ 3146.754229] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
[ 3146.754491] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[ 3146.754495] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
[ 3387.964180] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
[ 3387.964434] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[ 3387.964440] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
I have already seen this link and he explain that installing from AUR has resolved his problem, but the wiki says:
The second method you can use is the AUR; PKGBUILDs offered here are also made by Vi0L0 and are the same he uses to built packages for his repository. Lastly, you can install the driver directly from AMD.
My aim is to install Catalyst
Thank you for your helpI don't think that card is supported by AMD Catalyst anymore, even by the legacy branch...
-
Windows 8.1 doesn't hibernate or sleep after installing amd catalyst driver
hi i am using windows 8.1 64 bit but after installing a amd catalyst center windows behaviour changed it doesn't go for hibernate and sleep and after unstall it windows comes into normal position please refered me proper solution to install amd driver wihout any issue and also suggest me which version will be compatible with my device i have tried amd 14.9 and also 14.11 but issues didn't solve i am curretnly using intel Version10.18.10.3325 windows update show me amd wddi 1.3 driver but it always failed not installing..
Hp pavilion-15 n037tx Notebook
core i5 4200U
4gb ram
This question was solved.
View Solution.Hi @Ahmed-Aslam
I understand that you are have problems with hibernate and sleep on your notebook.
I would review the attached document. I realize from your post that you have tried some of the things listed, but just check it and see if anything there was missed, perhaps the section on malware issues.
Troubleshooting sleep and hibernate issues in Windows 8
You can also try using system restore to roll back to before the software update to see if that resolves the issue.
Using Microsoft System Restore (Windows 8)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
Pavilion dm1-3000 - AMD Catalyst Suite 12.1
Has anyone tried the new AMD Catalyst Suite 12.1 with this laptop? Does everything work properly?
Cheers!Since no one seems to have tried it, how about you try and tell us how it goes. I tried it on a different HP notebook and it didn‘t work, but HP said my notebook had a hardware problem and is currently replacing the motherboard.
Good luck. -
Deploying AMD Catalyst software via task sequence
I am trying to have the AMD Catalyst software installed on all machines with an AMD video card. Right now I am using a WMI query in my task sequence on the video controller. When I image the machine, the AMD software does not install via task sequence along
with the OS.
Here's the WMI query I'm using,
SELECT * FROM Win32_VideoController WHERE Name LIKE '%AMD%'
The application package itself works fine when I push it out to Software Centre after imaging.
The machine I currently have is a Dell 790, with an AMD Radeon HD 5450 card in it. I've tried changing the query to
SELECT * FROM Win32_VideoController WHERE Name LIKE '%AMD Radeon HD 5450%'
That didn't work either
I am fairly new to doing this in SCCM, so any advice is appreciated!This is what the log file shows,
Parsing step node: AMD Radeon Drivers with Catalyst Application TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Description: TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
ContinueOnError: true TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
SuccessCodeList: 0 TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
A condition is associated with the step found TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Found and operator. TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
There are 1 operands TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
**Processing expression node TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Found SMS_TaskSequence_WMIConditionExpression expression. TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
**In ProcessBuiltInCondition node: expression TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
There are 2 operands in the built in action TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Operand Namespace=root\cimv2 TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Operand Query=SELECT * FROM Win32_VideoController WHERE Name LIKE '%AMD Radeon HD 5450%' TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Successfully added 3 condition parameters TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Disable: TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Run in attribute: FullOS TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Timeout: TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
DefaultVarlist found TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Variable name: OSDApp0Description TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Variable name: OSDApp0DisplayName TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Variable name: OSDApp0Name TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Variable name: OSDAppCount TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Action command line: smsappinstall.exe /app:ScopeId_8268EA23-B1E9-4253-B5FD-3518040FB65A/Application_1493ab57-12ba-4ef0-ab47-0f48e93fcca8 /basevar: /continueOnError:True TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Adding instruction at 13 TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Processed all elements TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Adding end group instruction at 14 TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
The next instruction after group will be at 15 TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
Processing group TSManager 2/4/2014 10:27:03 AM 2800 (0x0AF0)
After this is goes to the next sequence. No errors that I can see, but not sure why its skipping it -
Hi,
I have installed AMD Catalyst. When I boot, virtual console appears as usual (since I don't use a display manager), I am able to login, and I can run Xorg.
But once Xorg has been launched, if I try to switch back to TTY, only a black screen appears. The console does still work though, if I type startx, Xfce starts again. There is just no text.
I already tried this, but without success.
GPU: AMD Radeon HD 6870
/etc/default/grub Kernel parameters:
GRUB_CMDLINE_LINUX_DEFAULT="quiet nomodeset vga=0x0346 cryptdevice=/dev/lvm/Root:root root=/dev/mapper/root resume=/dev/mapper/swap"
/etc/mkinitcpio.conf hooks:
HOOKS="base udev autodetect modconf block keymap lvm2 encrypt filesystems keyboard fsck"hi, I suppose than like me you use xorg 1.17 and catalyst-test from AUR, if is the case here a comment in the package page from packager and maintainer of catalyst stuff:
Vi0L0 wrote:
2015-03-13 21:14
updated to 15.3-1:
- borrowed from ubuntu.
- brings xserver 1.17 support
- its buggy
I was thinking for long time about uploading this driver because I think it sucks . On xserver 1.17 xv video output doesn't work at all, as well as tty terminal, which is sad . After switching to xserver 1.16 it gets back to normal. I remember that in the past AMD did release ubuntu driver which had same bugs.
So it sucks, steam games are working fine, maybe better, but still.
And since this package is called catalyst-test i decided to make this update, you can switch to catalyst-total in no-time.
I also dropped many patches and left only most neccessary, so 1) for intel iommu, 2) for agp 3) for 4.0 kernel support. You can still uncomment dropped one if you want. -
Gf4MX440-VTP TV-Out doesnt work.
I've just buyed a dual gf4 mx440 with 64Mb and TV-Out, TV-In.
When I installed it I began working with two monitors witout problems, but when I've tried to connect de TV-Out, it doesnt word.
I've checked a hundred times the cable connecting, and it's ok because with my old graphic card I could.
I tried to upgrade the BIOS with an unofficial version and it didn't work, I downdated to the original version of BIOS again.
The graphic card detects the TV because it enables the TV-Out option in the configuration, but when I enable it I get a strange screen of one color on TV. The TV get's of a color brown or orange or something like that and I can't see nothing.
I've selected my country format (Pal/B, Pal/G). I've also tried all other formats whitout any result.
I'm running Windows 2000 Sp3
My motherboard is a DFI AD70-SC (With AGP 4x)
AMD Athlon XP 1.500
512Mb DDR RAM
I've tried all but it doesnt work.
Thank you very much.Dunno if this thread is still going, but I figured why not
Well, I bought the GF4-mx440 VTP (8866) back in october, but haven't actually gotten around to testing it until last night, and I ran into the same issues.
For reference, the drivers on my cd are 30.00.
It was quite frustrating, but I did a ton of research and here is what I was able to find out. THis information isn't terribly organized, but bear with me because it's hopefully useful
TV-out on nvidia cards is not as simple as some may say. (Ie. all those who say nvidia has way better drivers than ati ).
Different detonator versions have WIDELY varying tvout support. In Some versions it works, some it works well, some it works poorly and others it doesn't work at all. Quite shocking, but sadly this is true.
Bits of info about the MSI-mx440 vtp itself. The tv out is based on a Seperate chip, the Phillips 7108. This chip handles the tv in and out features. (Geforce4 chips have themselves an "on chip" solution for tvout. But typically when manufactures use a Video In chip, you let that chip handle video out also).
Regarding the 440's bios. There is only one version (as listed through the live update running win9x). HOWEVER there are issues with this card and WinXP, to which the fix is to apply a bios update. I have not tried liveupdate on winxp (I run 98se), but I think that this bios update is only available upon special request to MSI. I'm not sure how it affects the situation(s) under win9x, but supposedly it fixes some winxp issues. (I will be installing XP in a dual boot config shortly, so I'l know for sure soon ). So according to the MSI support FAQ's, there is a bios update to address issues in winXP, that you can only get through special request (assuming you have winxp). I am not sure what the affects would be on win9x system, but since I am giong to dual boot soon, I'll probably have to apply the new bios and find out.
Okay, so how to find out if it's a software (driver) problem, or if it's hardware (a broken card that you can return). Here's what you do:
Unplug all monitors (vga connections) and plug in the TV out (I dont' have any s-vidoe tv's, so I just use the composite (RCA) jack) to a tv, and make sure the tv is on. Now boot your computer.
If you get output to the tv (usually the post info from the motherboard, followed by the win98 startup screen) this means your hardware works fine. (This is what happened to me). Strangely, it made it all the way into windows (on the tv), but typically what happens is that once windows loads you end up with the messed up pinkish brown screen. (I've never been able to have it boot into windows on the tv since then, heh).
SO if you do get picture during startup (before the os loads) then it means your card is fine, and it's a driver issue.
*Note: One thing I've noticed is that your tv-output is affected by which VGA out port you put your monitor on. For me, when booting with both connected (vga and tvout) if it's plugged into one socket, I see both monitor and tv, if it's plugged into the other socket, I don't see tv at boot. Not a big issue, but worth noting*
Okay, so now if you did see otuput on the tv during boot (before windows), you know your hardware is working. So you have to find a driver version that works for you. I'm going to list my own experiences.
MY cd came with the 30.00 MSI drivers. These gave me that icky pinkish brown flickering screen. Tv-out didnt' work with them. Tried the 31.00 MSI drivers, same thing. This was odd I thought, as the two most recent MSI drivers didn't work. So I tried the MSI 28.90 drivers, same thing with them too.
Finally I tried the MSI 27.20 drivers, and voilla, tv out worked! I was able to extend the desktop, and clone it, was even able to tape a downloaded episode of 24 on my vcr .
Of course using year old drivers is less than ideal (especially for 3d gamming). However, these are the ONLY MSI drivers that have tvout working.
I decided to move on to the nvidia detonator reference drivers, ideally you'd stick with the manufacture MSI, but what can you do. Here is what I have found so far:
27.20 MSI - Works with tv out
27.20 Nvidia - Works with tv out
27.30 Nvidia - This one is interesting, tv out works in extended desktop mode. BUT there is no tab in the options for cloning (the 'nview' tab is missing). So you can't clone, or overlay, only the extended desktop. So it's an "extended desktop only" driver.
27.42 Nvidia - Works with tv out (works same as 27.20s)
28.90 MSI - NO tv out
30.00 MSI - No tv out
31.00 MSI - No tv out
30.82 - Most resent 41.09 Nvidia - Tried them all, no tv out for any of them.
I have yet to try all the 28-29 nvidia reference drivers, so dunno if tvout works with them.
So what does this all mean? FIrst off, check if your cards hardware works (boot only with tv on and tvout connected, NO VGA). If your hardware works, then you have to find drivers that work with tvout. Give the ones that worked for me a shot, see if they work for you. (I typically plug in my vga and tvout at same time, so a see the POST in BOTH of them. Boot the computer with everything on, and then go to the settings and try to enable tvout).
This situation is less than ideal of course. It looks like you have to pick your drivers based on 3d performance, or tvout. But not both! Either use the most recent drivers for the best 3d support (but no tvout!), or 1yr old drivers for tv-out, but not the best 3d support. I'm an avid gamer personally, so this situation sucks.
What I find odd, is that MSI's own drivers (28.90, 30.00, 31.00) have these issues. They are privy to the peculiarities of the MSI cards, so they should be able to address it.
What the pattern (some drivers work, others don't) suggests to me is that MSI cards aren't fully compatible with the reference design. Possibly an issue with the bios.
I will try and get a hold of the bios update for the WinXp issue, and see how that affects the situation in win98se.
Hopefully this was helpful
(For reference, my system:
AMD xp1700, 256-DDR Kingston - Samsung chips, ECS k7s5a MB, seagate barracuda IV 40gb HD, LG 40x cdrw, onboard ac97 sound + lan, Usb keyboard + usb mouse).
Aggies -
Hi,
foldingathome doesnt work. the file /opt/fah/FAH502-Linux.exe wont execute. anyone having same issue?Beta fah5 binary for SMP client (x86-64 bit only) is available from their download page
folding@home SMP faq wrote:
We are also releasing another type of client: the Folding@Home SMP client. SMP means "Symmetric Multi-processing" (...)
The goals of the SMP client and the GPU client are similar: in order to tackle many of the problems of interest (especially related to protein misfolding and aggregation, such as in Alzheimer's Disease), we need to not just have lots of computers participating, but we need results returned more quickly so that we can simulate trajectories of sufficient length. Right now, we achieve this by running for many months to years (indeed, our first Alzheimer's Disease simulations ran for almost two years straight). That's where the SMP and GPU (and PS3) clients come in. They give us considerably longer trajectories in the same wall clock time, allowing us to turn what used to take years to simulate even on FAH, to a few weeks to months.
Moreover, the SMP and GPU clients are complementary. The GPU client can greatly (~30x) speed up a specific type of calculation (implicit solvent calculations), whereas the SMP client can lead to a 4x speed up over the complete range of calculations we need to run. (...)
Our goal is to apply this new technology to dramatically advance the capabilities of Folding@Home, applying our simulations to further study of protein folding and related diseases, including Alzheimer's Disease, Huntington's Disease, and certain forms of cancer. With these computational advances, coupled with new simulation methodologies to harness the new techniques, we will be able to address questions previously considered impossible to tackle computationally, and make even greater impacts on our knowledge of folding and folding related diseases.
This is a beta release and we expect that there will be several bugs, flaws, problems, etc. To minimize problems, we have been testing the client and cores extensively in house and they run well there. However, it's our experience that running in the controlled setup in our lab and running "out in the wild" are very different situations.
Note that it may not be as simple as launching new fah5 binary. From Folding-community forum, i can see
fah5 binary itself is 32 bit : the guy on Ubuntu Edgy x86_64 needs to install the 32bit compatibility package "ia32-libs".
Anyway there's no solution yet for single proc x86_64 like my amd 64 ?
Will give fah5-beta a try just in case.
EDIT
Well, that was worth a try :
$ ./fah5
Note: Please read the licen
se agreement (fah5 -license). Further
use of this software requires that you have read and accepted this agreement.
--- Opening Log file [November 22 17:38:12]
# SMP Client ##################################################################
Folding@Home Client Version 5.91beta
http://folding.stanford.edu
[17:38:12] - Machine ID: 1
[17:38:12]
[17:38:12] Work directory not found. Creating...
[17:38:12] Could not open work queue, generating new queue...
[17:38:12] - Preparing to get new work unit...
[17:38:12] + Attempting to get work packet
[17:38:12] - Connecting to assignment server
[17:38:13] - Successful: assigned to (171.64.65.56).
[17:38:13] + News From Folding@Home: Welcome to Folding@Home
[17:38:13] Loaded queue successfully.
[17:38:18] + Closed connections
[17:38:18]
[17:38:18] + Processing work unit
[17:38:18] Core required: FahCore_a1.exe
[17:38:18] Core not found.
[17:38:18] - Core is not present or corrupted.
[17:38:18] - Attempting to download new core...
[17:38:18] + Downloading new core: FahCore_a1.exe
[17:38:19] + 10240 bytes downloaded
[17:38:19] + 20480 bytes downloaded
[17:38:19] + 30720 bytes downloaded
[17:38:48] Working on Unit 01 [November 22 17:38:48]
[17:38:48] + Working ...
[17:38:48]
[17:38:48] *------------------------------*
[17:38:48] Folding@Home Gromacs SMP Core
[17:38:48] Version 1.72 (November 12, 2006)
[17:38:48]
[17:38:48] Preparing to commence simulation
[17:38:48] - Ensuring status. Please wait.
[17:38:48] Entering M.D.
[17:39:05] 7.4 percent)
[17:39:05] - Starting from initial work packet
[17:39:05]
[17:39:05] Project: 3007 (Run 4, Clone 7, Gen 5)
[17:39:05]
[17:39:05] Entering M.D.
starting mdrun 'SMP-msv-03'
5000000 steps, 10000.0 ps.
[17:39:12] SMP-msv-03
[17:39:12] Writing locProtein: Extra SSE boost OK.
[17:39:12] ocal files
[17:39:12] Extra SSE boost OK.
Now 3 questions for you guys.
- will it works as expected by folding team (SMP) ?
- will it runs on custom kernel recompiled without SMP for single core machines ?
- wonder what kind of flags they're using when building this binary. -
[SOLVED]Are X11 and AMD catalyst drivers friends again?
last time i installed linux on my laptop X11 had dropped support fro amd catalyst drivers (proprietary video card drivers), did amd do something about it? did X11 team reconsider? can i use the catalyst drivers on X11 again now? my laptop and it's stupid APU or "dual graphics" aren't playing so nice with the open source radeon drivers.
Last edited by rabcor (2013-06-20 19:16:00)If wine supported skype, i would be more dead set on using linux than using the amd proprietary drivers.
The reason this isn't a big deal to me is mostly because i only use this laptop for 3 things, regardless of OS. Teamspeak 3, Skype, Playing Videos.
I have it set up on a dual boot because neither windows nor linux seem to be reliable on this laptop, the reason is hardware-side, this APU is driving me nuts.
The reason i'm having problems with the radeon drivers is that even if i set my computer to disable the "switchable graphics" on boot it sometimes seems to randomly re-enable it without even notifying me. The reason this is bad is because the switchable graphics cause my laptopt to overheat. If this happens in windows it usually just enters hibernation mode while the heat levels are just barely critical, in linux however it keeps running for a while at critical levels before it'll finally just overeat. I'm hoping that the AMD proprietary drivers can help me solve this on the linux side.
Whichever operating system i can manage to make stop ever using the switchable graphics (thus preventing all overheating) will be the one i will use in the end, but i'm not in any big rush, windows is working decently for me on the laptop right now, and i can patiently wait for the amd proprietary drivers to support X again, since i don't interact much with the computer at all anyways. Using linux would mostly just be to make the laptop look better. Linux seems to be the more likely one to succeed with this task in the end however (because i can optimize/customize it a whole lot more than i ever could windows, and because i'm scared of updating the catalyst drivers in windows because my laptop has often just completely broken upon catalyst driver update in windows.)
Maybe you are looking for
-
TS1500 on windows 7 step 5 i can't see my device.what should I do to show my device?
I have problem to import photo to pc. I usualy Connect my iOS device to my computer. then the AutoPlay window appears, I click "Import Pictures and Videos using Windows,or Start > Computer.>Right-click the logo for your device and click "Import pictu
-
Single user mode doesn't accept commands
Due to some kernel panics with an old G5 iMac, I wanted to run the memtest utility. After an initial test in a Terminal, I wanted to try again in single user mode, just to be sure. Had no problem at all starting up (Cmd+S), didn't get any error messa
-
Add a leader to an automatic right tab?
I often want a right tab at the very edge of my text boxes. I know the shortcut for this is Shift tab. BUT... I'd like it to also have a leader... the little dots that go from the text on the left to the percentage on the right. If I use the above sh
-
Hello I was just wondering I pre-ordered my iphone4 on apple, not verizon because the site was not working for me all night Is there a difference in price if you get if from apple? and I just read some discussions and people were saying they r getti
-
Adjustments needed in Event detail/list layout, help!
Hi there, I could really need your help on this: I'd like to make these changes to the event module template: - be able to hide the booking form for certain events - make sure the event list layout only shows the upcoming events for the selected mont