My anchored objects dont display after CS5 upgrade - help?

Hi,
We've just upgraded to CS5 from CS3.
I publish educational books, which contain a lot of object styles and anchored objects.
I have just opend a book im working on in CS5 and have had problems with both anchored objects not displaying and object styles changing. The first is more pressing.
The problem arises where I have an anchored object inside another anchored object, and they use custom positioning.
For example. I have a pullout box that contains text and an image. The image is anchored inside the pullout box and the pullout box is anchored to the main body of text.
The images are no longer displaying. I can select their frames, and if i change the image positioning to inline the images display fine, but when it is set to custom (which they need to be) I can no longer see the image.
Is anyone able to help with this, its a major problem as i am woking with hundreds of images here.
Thanks

My usual advice is that with a project this large, it's best to finish it in the same version it was started in. Even a small change in the text engine can effect things like this and there were changes from CS3 to CS4 and again to CS5, but I'm not really sure what's happening in your case.
Bob

Similar Messages

  • Can I delete CS4 after CS5 upgrade?

    Can I delete CS4 after I installed the CS5 upgrade, or will that have a negative effect?
    Thanks

    If you don't want to keep the older version:
    uninstall the older version first, BEFORE installing the new version.
    The Adobe Uninstallers have a nasty habit of messing with essential support files of the new version because they mistake them for the older versions.  When that happens, you have to jump through hoops just to uninstall the damaged version, as not even the Uninstaller will work on it. (You would need something called the CS3Clean Script, CS4Clean Script aor CS5Clean.  Avoid having to go there.  Honest.)
    All Adobe upgrades are FULL INSTALLERS.  The Upgrade installer will simply ask you for the old serial numbers when it doesn't find an older qualifying version installed.
    Once more:
    Do NOT uninstall an older version after upgrading to a new one; do it BEFORE.
    Foretold is forewarned.
    Wo Tai Lao Le
    我太老了

  • Additinal tab B in sales Order header not displayed after EHP5 upgrade

    Hello Everyone,
                              I am facing an issue that the 'Additional data B' in the sales order header is not getting displayed after we ugraded to EHP5.
          We found the issue , that the screen '8309' provided by SAP for the additional data in SO header is not getting called.The call is made from screen '4312' but the call subscreen screen statement fails.
    This might be because these screens were modified (both '4312' and '8309' )using the Access key to accomodate more fields in the screen then originally provided. And SAP does not support for this modification as given in the SAPnote  170183.
    Now the question is how can I restore the existing functionality?
    PROCESS BEFORE OUTPUT.
    Verarbeitung vor der Ausgabe
    Kopfdaten vorbereiten
      MODULE VBAK_BEARBEITEN_VOR.
    PBO-Aufruf des Kunden-Subscreens "Kopf-Zusatzdaten B"
      CALL SUBSCREEN 8309 INCLUDING 'SAPMV45A' '8309'.
    PROCESS AFTER INPUT.
    Verarbeitung nach der Eingabe
    PAI-Aufruf des Kunden-Subscreens "Kopf-Zusatzdaten B"
      CALL SUBSCREEN 8309.                                                             <----This statement fails
    Alle Felder in der Bearbeiten-Kette
      MODULE VBAK_BEARBEITEN.
    Please advice.
    Regards
    Abhishek

    Hi
    Do you see SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B'?
    Regards
    Eduardo

  • Approver specfication section not displayed after system upgraded to EHP6

    Hello,
    We have just upgraded our eRecruiting development environment to EHP6 from EHP3. However, as a manager who creates the requisition and subsequently the job posting, there should be a place that allows the manager to specify the approver for this requisitiion. This is not displayed in the upgraded version. I have checked our authorization setup to ensure the manager does not have too wide an access that will bypass this approval specification process, and everything is in order.
    I am wondering if anyone else has run into the same problem.
    Thank you.

    Hello Alex,
    you are probably aware the huge changes in the eRec application when moving from EhP3 to EhP 4 or any higher enhancement package. The whole user interface for non-candidate roles is completely replaced. This includes the manager as well as the recruiter and the recruiting administrator.
    In principle it should be possible to run the old BSP applications as long as you do not activate any business functions for the enhancement packages (aka "pure technical upgrade").  But when I did such a pure technical upgrade from EhP 3 to EhP 4 for a customer about 4 years ago we already faced several serious issues with running the old ui and functions. So what you experience are very likely such issues as well.
    Kind Regards
    Roman

  • I tunes is missing after last upgrade help! Please

    After last upgrade I noticed ITunes App is not on iPad.  How do I get it back?  I tried to download it again but all I get is it comes loaded on iPad.  Can anyone help me.  Thank you

    Home Screen: Missing App Store, FaceTime, iTunes or Other Icon

  • Old pictures can not display after Itunes upgrade

    Earlier today I updated to the newest version of Itunes. I also added some new pictures to my synched directory for pictures (this directory has approx 725 pics that were all on my phone prior to this update of Itunes).
    When I synched to add the new pictures I got a message saying "some pictures could not be synched because they can not be displayed on the phone". Only 200+ of the pictures were transfered and the rest are not there.
    Again all of these pictures were on teh phone before so I am not sure why they can not be displayed now. I have tried re-synching and that did not help.
    Any thoughts?

    I am also having this problem. I have a 160gb classic that I bought last fall. I have a work computer I've used for my iTunes synch base due to broadband access.  The system had worked well enough with 64 bit XP and a few registration tweaks to calm itunes about working in that old environment. Forward to 2 weeks ago - I copy my library to the network drive so that IT can scrub the computer and upgrade me to Win 7. Computer is back up, install the newest version if iTunes, seems to come up fine. Several rounds of re-importing the library after it kept entering all the songs twice. Go to re-synch the ipod - get the 'this is a new device, erase *EVERYTHING* and re-synch. Yep yep. Sits there for nearly two hours saying it's re-uploading stuff. Then on the way home, I see - hey, a ton of stuff isn't there, lots of missing podcasts. Go check, everything is checked, new stuff downloaded, can listen to it on the PC with headphones. Then go synch the iPod - get the same 'things are updating..... synch finished'. And nothing has up- or down-loaded. Tried unchecking stuff, nada. Import new stuff, nada. Nothing   Plus it looks like pretty much every CD i ripped into itunes for the past 4-5 months failed to move - maybe iTunes was saving it somewhere else than the My Music folder.    PITA-factor of that aside, I'd really like to get at the last 3-4 weeks of podcasts. Any help on getting the system to actually do a real sy
    My other changes in the last few weeks are getting a new iPhone to replace an old non-iPhone, so there is another devicee on the account. I don't see my iPod listed amongst my devices in the iTunes store - not sure if that's only for wireless stuff.
    Help!!

  • Ugly display after an upgrade

    Hello guys,
    I have a BIG problem. This is what my display currently looks like :
    Uploaded with ImageShack.us
    This happened after an ordinary upgrade with "pacman -Syu" and a restart, because among upgraded packages there were kernel 2.6.37 and nouveau-dri 7.10.
    This looked similar before, but only when using nouveau DRI drivers while running 3D applications.
    I have absolutely no idea about what happens to my graphics card (it's an nVidia 6150SE) when DRI is being used. It has never been a big deal before, but now I just can't use my computer !! All I can see is the mouse arrow, all other things (menus etc.) get mixed with the mess.
    Does somebody have an idea ?

    Using kernel26-2.6.36.3-2 with the updated packages listed above doesn't solve the display problem for me.
    I have not any line with "ACPI: PCI Interrupt Link [LK3E]" in dmesg.
    If it were due to a kernel cause, the problem would still be present with the downgraded packages and the new kernel.
    But it is not the case, so I don't think it is a kernel problem, but an upstream bug in one of the upgraded packages.
    I looked at the opened bug reports and the resolved one but I didn't find anything recent about that display bug on apparently NV3X and NV4X Nvidia chipsets with the recent releases of libdrm and nouveau driver.
    But I cannot say with certainty if the developers are aware of the problem or not.
    It seems curious to me that the developers don't test the new releases on at least most of the chipsets.
    As I don't want to pass all my time on that, I hope that others will also search for infos and will try to contact developers on the nouveau project.
    Frankly I want to do something else presently.

  • Some Object dont work after restoring it from the filesystem

    Hi !
    I have a JFrame and in this I have a JPanel.
    In the JPanel I have a JTabbedPane.
    If I store the JTabbedPane to the filesystem using ObjectOutputStream and than restore it by using the ObjectInputStream some JTextFields in the JTabbedPane dont work correct. The most Objects work okay.
    Do I have some problems with the pointer or is the reference lost ? I have 40 Objects and 2 or 3 are frozen after loading the JTabbedPane. Hmm...
    Some lines of the code:
    <code>
    // WRITE OBJECT
    if (e.getSource() == jMenuPosSpeichern)
    { try
    { ObjectOutputStream stream = new ObjectOutputStream(new FileOutputStream("c:\\test.dat"));
    stream.writeObject(jTabbedPane);
    stream.flush();
    stream.close();
    catch (IOException e9) {e9.printStackTrace();}
    // READ OBJECT
    if (e.getSource() == jMenuPosOeffnen)
    { try
    { ObjectInputStream stream = new ObjectInputStream(new FileInputStream("c:\\test.dat"));
    contentPane.remove(jTabbedPane);
    contentPane.repaint();
    jTabbedPane=(JTabbedPane)stream.readObject();
    stream.close();
    contentPane.add(jTabbedPane);
    catch (Exception e8) {e8.printStackTrace();}
    </code>

    No they are not different.
    On the first register of the JTabbedPane I have 2 JTextFields an one JComboBox. The first JTextField is frozen. After trying sometimes the second field is frozen.
    Is my way to store an object the correct way or is there a better way available ?
    The relevant fields have this line in the source.
    (code)
    ....class...
    JTextField name = new JTextField(30);
    ....constructor....
    jTabbedPane.addTab("register1",reg1);
    reg1.add(name);
    name.setBounds(170,100,200,20);
    (/code)
    All my fields I add to a Tab of a JTabbedPane and all the Field have setBounds. No difference to the other objects.
    Thx Wolfgang

  • Main viewer window not displaying after Yosemite upgrade

    I just upgraded tp Yosemite. Also upgraded Aperture (v3.6). Opened up Aperture. After it finished upgrading my library I noted that thumbnail images on viewer display OK but there is no image showing on the large viewer. Tried selecting different thumbnails. No success. Tried quitting and restart app. Nothing. Any ideas?

    Thanks. I tried all three of the repair options but no success. However, after restart things started working correctly. Possibly it was the combination of repairs and restart that fixed it.

  • Multiple Problems after Leopard upgrade HELP! Video display and FW problem

    I don't know if this is related.. but I've been battling multiple problems ever since I upgraded my G5 to Leopard a week ago. Everything was perfect under Tiger.
    Well, I think I've got everything solved except two last things.
    1. My 750GH Maxtor Firewire drive... when I plug it in... does not show in the desktop and it causes both my internal drive and two other Firewire enclosures to disappear from the desktop. I can see all of them mounted in the disk utility, but if this one drive is plugged in.. all icons disappear from the desktop. If I unplug or unmount the 750GB drive.. everything comes back.
    I've reformatted this drive, etc. This does not happen on my MacBookPro. The drive mounts fine on that. I've tried different cables, I've tried USB (it's a triple interface Maxtor) and nothing seems to work. I would assume there's something wrong with the drive and not my desktop... but the drive works fine on the MacBookPro.
    PLEASE!! Any clues would help...
    The other problem that only occurred directly after upgrading to Leopard... is that my graphics now get corrupted and garbled. I've got two video cards running two LCD monitors. The card giving me problems is the ATI Radeon 9800 Pro (256MB). What happens is.. first all the window shadows and top menu bar start getting checkerboard patterns.. then the whole screen starts getting variants of different colors and checkerboard patterns. After awhile and refreshing the screen a few times... the problem goes away for a bit. Then comes back.
    Again, this card and my entire system and drives were working fine under Tiger. Now, I don't know if I have a bad card? Is there something wrong with Leopard on my G5 2Ghz DP? Did my Maxtor 750GB triple interface drive just go bad with the upgrade?
    I don't know where else to look, I'm guessing the "geniuses" at the Apple store won't help me since this machine is out of warranty. Any help would be HUGELY appreciated. I've been battling all these problems ever since I started the Leopard upgrade 4 days ago and have not got much sleep.

    The drives not or disappearing on the desktop could point to the need to do a pram reset.
    I believe you hold down the apple-option-p-r keys at startup and listen for a couple of chimes.

  • Distorted display after Mavericks upgrade

    Hello,
    I should start by saying that I am not the most savvy person when it comes to technology...
    Last night, I decided to upgrade my Mac Mini OSX from Mountain Lion to Mavericks. I thought that it had been out long enough that any problems may have been ironed out.
    So I start the download and go to bed. This morning I was prompted to restart the Mac, so I did. After it started up it went through the normal process, chime, grey screen and then it went to a heavily distorted screen. I cannot see my desktop and I cannot click on anything, though I can see the mouse moving. I have tried to restart it a couple of times and it keeps doing the same thing. I have attached a photo for reference.
    I have not had any problems with the Mac prior to this upgrade. I would love some advice on what I can do, if anything, to fix the problem.
    Might be worth noting that I have the mac connected to both the dell screen and my tv via a hdmi cable.
    Thank you for taking the time to read this!

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
         Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).

  • Custom backup jobs dont run after OS upgrade from 2000 to 2003R2

    Hey Everyone,
    We upgraded our OS server from 2000 to 2003R2 and now when we try to run / create oracle suggested backups i cant even start the process i keep getting:
    Connection to XXXXXas user XXXXX failed.
    We have oracle 10.2.0.4 installed
    Any ideas would be appreciated
    thank you,
    Kal

    I can log into the database using SQLPLUS with no issues and the agent starts fine on the server. When i go to GRID Control and try to create a new oracle suggested back i use the local admin account and i get the error i mentioned before. I have added him to the log as a batch and log in as a service assignments however still i get the error.can you please describe once again, where you are trying to connect and what is the error message. if any logfiles then it would more helpful.
    Thanks

  • After CS5 upgrade from PSElements9 and reason to keep 9?

    I'm updating my MAC from PS Elements 9 to the full CS5 Photoshop Standard.  Is there any reason to keep the Elements installed?
    I mean is there anything it can do CS5 can't?  Otherwise it seems redundant.  What do you think?

    I mean is there anything it can do CS5 can't?
    I guess one could argue about that …
    One item that (former) PSE-users have occasionally brought up were frames.
    One can create frames in Photoshop, but PSE seems to offer a default selection that Photoshop does not.

  • G3 Monitor saying "out of range" after itunes upgrade - HELP PLEASE

    I'm running a G3 with 512RAM. It has been running Panther totally reliably for a year. I upgraded to 10.3.9 and the G3 ran no problem. I upgraded to the latest Itunes, restarted the G3 and now after the tones the monitor turns black with the message "out of range" refering to the frequency setting. I can hear to G3 drive running but I cant progress beyond this message on the monitor. Please help...have I lost my G3 for ever? is there a safe mode I can start the G3 in? I have the Panther discs but I don't seem able to do anything to start this G3 now. Please help..I love this Mac, I dont want to loose it, don't mind loosing the data, but not the mac..any ideas..please

    Refer to mac manual - Resetting the PRAM (parameter randon access memory).
    Restart whilst holding Command/option/p/r keys and release after second tones. Suggest changing internal battery also.

  • Macbook air battery cut in half after Mavericks upgrade- help?

    Hey everyone,
    I have a mid-2013 MBA that would get 10-12 hours of life, on average, with ML. After upgrading to 10.9 though, the battery life has been cut in half. Not only that, but the battery still drains when I have the lid closed and runs hot inside of my bag. This used to never happen before. I have performed SMC and PRAM resets multiple times and I am almost at my wits end. I travel extensively and I purchased this MBA specifically to not worry about my battery life! Quick note, I have not installed any new programs since the OS update and my usage has remained consistant.
    Thank you all for your help!
    Here is the etercheck output!
    Hardware Information:
              MacBook Air (13-inch, Mid 2013)
              MacBook Air - model: MacBookAir6,2
              1 1.3 GHz Intel Core i5 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel HD Graphics 5000 - VRAM: 1024 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 0:22:35
    Disk Information:
              APPLE SSD SM0128F disk0 : (121.33 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 120.47 GB (81.79 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Internal Memory Card Reader
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
              com.avast.PacketForwarder          (1.3)
              com.avast.AvastFileShield          (2.0.0)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.google.keystone.daemon.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] Safe.Connect.plist
    Launch Agents:
              [loaded] com.divx.dms.agent.plist
              [loaded] com.divx.update.agent.plist
              [loaded] com.google.keystone.agent.plist
              [loaded] Safe.Connect.client.plist
    User Launch Agents:
              [loaded] com.avast.home.userinit.plist
    User Login Items:
              iTunesHelper
              Google Drive
    3rd Party Preference Panes:
              avast! Preferences
              Flash Player
              TeXDistPrefPane
    Internet Plug-ins:
              Default Browser.plugin
              DivX Web Player.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              googletalkbrowserplugin.plugin
              JavaAppletPlugin.plugin
              npgtpo3dautoplugin.plugin
              o1dbrowserplugin.plugin
              OVSHelper.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
              thinkorswim plugin_x86_64.plugin
              tossc plugin_x86_64.plugin
    Bad Fonts:
              None
    Time Machine:
              Skip System Files: NO
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 120.47 GB Disk used: 38.68 GB
              Destinations:
                        Data [Network] (Last used)
                        Total size: 2 TB
                        Total number of backups: 39
                        Oldest backup: 2013-06-27 21:42:24 +0000
                        Last backup: 2013-11-05 14:01:05 +0000
                        Size of backup disk: Excellent
                                  Backup size 2 TB > (Disk size 120.47 GB X 3)
    Top Processes by CPU:
                   2%          WindowServer
                   1%          EtreCheck
                   1%          fontd
                   0%          sysmond
                   0%          Dock
                   0%          Google Chrome
                   0%          Activity Monitor
                   0%          Google Drive
                   0%          coreservicesd
                   0%          aosnotifyd
    Top Processes by Memory:
              156 MB             Google Chrome
              106 MB             Google Chrome Helper
              90 MB              mds_stores
              82 MB              Google Drive
              57 MB              Finder
              49 MB              WindowServer
              41 MB              Dock
              25 MB              SystemUIServer
              25 MB              mds
              25 MB              CalendarAgent
    Virtual Memory Statistics:
              4.33 GB            Free RAM
              2.36 GB            Active RAM
              697 MB             Inactive RAM
              644 MB             Wired RAM
              1.05 GB            Page-ins
              0 B                Page-outs

    I don't think so. App Nap seems to be in place for all of my programs. Recently, I have resigned to removing chrome and my anti-virus software. Unfortunatly, this did not really solve the problem. It extended my average battery life by MAYBE an hour or so, however, I am still seeing significant battery drains and laptop heating when the lid is closed. I have resigned to taking my laptop in soon. I have attatched another etre check output though if you wish to see an updated log:
    Hardware Information:
              MacBook Air (13-inch, Mid 2013)
              MacBook Air - model: MacBookAir6,2
              1 1.3 GHz Intel Core i5 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel HD Graphics 5000 - VRAM: 1024 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 5:21:25
    Disk Information:
              APPLE SSD SM0128F disk0 : (121.33 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 120.47 GB (80.07 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Internal Memory Card Reader
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.google.keystone.daemon.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] Safe.Connect.plist
    Launch Agents:
              [loaded] com.divx.dms.agent.plist
              [loaded] com.divx.update.agent.plist
              [loaded] com.google.keystone.agent.plist
              [loaded] Safe.Connect.client.plist
    User Launch Agents:
    User Login Items:
              iTunesHelper
              Google Drive
    3rd Party Preference Panes:
              Flash Player
              TeXDistPrefPane
    Internet Plug-ins:
              Default Browser.plugin
              DivX Web Player.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              googletalkbrowserplugin.plugin
              JavaAppletPlugin.plugin
              npgtpo3dautoplugin.plugin
              o1dbrowserplugin.plugin
              OVSHelper.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
              thinkorswim plugin_x86_64.plugin
              tossc plugin_x86_64.plugin
    Bad Fonts:
              None
    Time Machine:
              Skip System Files: NO
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 120.47 GB Disk used: 40.41 GB
              Destinations:
                        Data [Network] (Last used)
                        Total size: 2 TB
                        Total number of backups: 34
                        Oldest backup: 2013-06-27 21:42:24 +0000
                        Last backup: 2013-12-17 04:32:11 +0000
                        Size of backup disk: Excellent
                                  Backup size 2 TB > (Disk size 120.47 GB X 3)
    Top Processes by CPU:
                   2%          WindowServer
                   1%          EtreCheck
                   1%          fontd
                   0%          Google Drive
                   0%          Finder
                   0%          coreservicesd
                   0%          com.apple.WebKit.Networking
                   0%          Dock
                   0%          notifyd
                   0%          opendirectoryd
    Top Processes by Memory:
              369 MB             Safari
              120 MB             com.apple.WebKit.WebContent
              115 MB             iTunes
              98 MB              com.apple.IconServicesAgent
              82 MB              Google Drive
              66 MB              WindowServer
              57 MB              Finder
              57 MB              com.apple.WebKit.Networking
              41 MB              Dock
              41 MB              DashboardClient
    Virtual Memory Statistics:
              3.35 GB            Free RAM
              3.55 GB            Active RAM
              435 MB             Inactive RAM
              694 MB             Wired RAM
              522 MB             Page-ins
              0 B                Page-outs

Maybe you are looking for