My antivirus(macfee) has blocked me from using firefox browser. how do i unlock it?

my antivirus(macfee) has blocked me from using firefox browser. how do i unlock it?

Several tried to but no one seemed to understand the real problem.
I COULD, because it was mine too. So it follows the only ultimate solution:
1. Open Firefox
2. On the address bar, type – about:config in the URL. Press Enter.
3. You will be warned about Warranty. Click on “I’ll be careful…”
4. On the Filter dialog box type – search.conduit
5. It will display all related entries. Right-click on Preferences Name and Reset.
It worked for me, after trying a dozen of "fake" solutions. ;)

Similar Messages

  • I have a blank pop-up that shows up when I start firefox. It doesn't blocks me from using my browser. What can I do to remove it?

    I have run a virus scan, and there were no viruses or bugs found. I have uninstalled Foxfire, restarted my computer, and then reinstalled Foxfire again. This window continues to keep coming up and blocks me from using the web browser. What else can I do to get rid of it?

    Type '''about:support''' in the address bar and press '''Enter.'''
    Under the main banner, press the button; '''Copy Text To Clipboard.'''.
    Then in the reply box at the bottom of this page,
    do a right click in the box and select '''Paste.'''
    This will show us your system details.
    '''No Personal Information Is Collected.'''

  • Adobe Flash Player has blocked me from using FF. A box shows up and the upper screen is grayed out

    When I start FF, a small box comes up in the upper middle of the screen - it is from Flash Player and it has two selections: allow and deny. With this flash player box, the upper third of the screen is grayed out. It will not allow use of most visited, bookmarks, or anything that is to be initiated at the top of the page. Even if I start a program, I cannot use the upper controls for that program. This is the second day that it has been blocking my use of FF. Note: I also use Seamonkey, but it has not been affected by the flash player problem. I have re-installed flash player, re-booted, restarted FF, and no changes have come about. I am still blocked from using FF. In fact, I am using this support page on Seamonkey.

    this sounds really strange, could you attach a screenshot of the issue?
    another thing you can try to troubleshoot the issue is a clean reinstall: remove firefox from the windows control panel & chose to remove all personal data in the uninstaller. afterwards manually check if the firefox program folder got deleted (it's usually in ''C:\Program Files\Mozilla Firefox'') and else remove it manually. then download & install a fresh copy at getfirefox.com
    if this doesn't work either please do a full scan of your system with the security software already in place and different tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner], [http://www.microsoft.com/security/scanner/default.aspx microsoft safety scanner] & [http://www.kaspersky.com/security-scan kaspersky security scan].

  • Why does Adobe Flash Player block me from using Firefox?

    Every time I try to use Firefox, Adobe Flash Player blocks me from doing so.
    I get continual messages that keep reappearing: """""""Adobe Flash Player 11.5 r502 has stopped working.
    A problem occurred to make the program stop working correctly. Windows has closed... etc. """""""
    This message just keeps re-appearing, and I can't do anything else by close out of it........
    and then switch to another browser. I CAN'T USE FIREFOX.
    I went in and downloaded the new version, just to make sure it wasn't being blocked by an old version,
    but that didn't matter at all. It still blocks me out.
    HELP!!!!!!! How do I stop this?
    ((((Note: I haven't been in here for over a year, and have no idea what email account you
    have listed, or even how to find out. Thus, please send reply to: RogerHimesCoach at G mail dot com.))))
    I know my username only.
    Roger

    I'm sorry you're going through this.  I suspect you're running into a conflict with our Protected Mode which was introduced in Flash Player 11.4.  Please try the troubleshooting steps outlined in this FAQ:
    How do I troubleshoot Flash Player's protected mode for Firefox?
    In particular, I'd recommend temporarily disabling protected mode (for troubleshooting purposes only) to see if that addresses the issue.  If it does, please re-enable it and give our latest Flash Player 11.6 beta a shot.  You can download it here:
    http://labs.adobe.com/downloads/flashplayer.html
    Thanks,
    Chris

  • A virus-like program MY HERITAGE SEARCH stopped me from using Firefox. How do I get rid of Heritage?

    I used Firefox works well on my old Sony computer. It was working well on my new HP until this program called MY HERITAGE SEARCH appeared and blocked the entire Firefox browser on my monitor. Eventuallly, I had to remove it from my computer. I am now using Internet Explorer.....and I can stilll see the MY HERITAGE SEARCH program but it does not occupy my whole screen. Please HELP!
    After uninstalling Firefox, I downloaded Firefox but it always came with this Heritage Search program/virus.
    [email protected]

    See:
    * http://www.ehow.com/m/how_5952493_remove-myheritage-search.html
    Firefox 8 is latest and stable and you should have it
    * getfirefox.com

  • X marks is blocking me from using firefox as soon as i open it up X marks pops up and freezes everything

    I click on Firefox to open the browser then X Marks pops up on the screen tells me it is lading then it shrinks to a bar . I can't close it nor can I click anywhere on my screen with out my computer going bonk bonk and not doing anything i click on. How do I fix this I have gone into my program list to delete X marks but i can't find it. please help me so i can use my Firefox

    Hi cjernigan-
    Are you using the Xmarks addon for Firefox? [https://addons.mozilla.org/en-US/firefox/addon/xmarks-sync/ ]? I would suggest trying to download it again, and hopefully that will help sort out the problem.

  • ISP is blocking us from using their smart host, they think we are spamming.

    Our ISP is blocking us from using their smart host a few times these days. They told me that one or some of our computers were infected and spamming. I checked Trend Micro console, but have not seen any viruses so far.
    We migrated from SBS2003 to SBS2011 a few days ago. And our ISP blocked us from using their smart host on the very next day. Ever since then, this has happened 3 times in a week.
    If I use our own server to send out emails, some recipients will reject because of their spam filtering system.
    Any thoughts, suggestions??
    Thanks in advance!

    On your network firewall, you can block outbound SMTP (25) for all of your network systems and create an allow outbound SMTP (25) for your server. Thus if a workstation is trying to send direct to the internet your firewall should prevent the communications
    but it will allow your server to send mail out to your smarthost. If your firewall can support unified threat protection, enabling such services will aid you in assuring yourself and your ISP of the clean bill of health for your messaging environment.
    You can also force a password change on all of your user accounts as a preventative measure. If you were dealing with ISP mailboxes or an external provider, this would be where the vendor would start.
    You should also be able to get support from your ISP; if they are blocking your connection they must have some information to work with that will help you narrow your approach. Another option would be to look into third party smarthost/sanitation services
    such as Forefront Online Protection for Exchange which can certify your email and can allow you to bypass your ISP.  Usually an ISP offers a free smarthost service but what you get in return is entry-level service, but if you pay for outbound smarthost
    services, you get a service level and support agreement. 
    Hope that helps,
    -Jason
    Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP

  • This program has been blocked for your protection/ An Administrator has blocked you from running this program/ Return code: 1625

    This program has been blocked for your protection/ An Administrator has blocked you from running this program/ Return code: 1625
    If you get a message saying, “Publisher: Not trusted,” the printing functionality you are attempting to use may become blocked while downloading, installing or attempting to run.
    You may also see messages such as:
    MSIExec installation error (Return code:1625)
    The recommended software listed below could not be installed
    “Do you want to allow the following the program from an unknown publisher to make changes to this program”
    “This program has been blocked for your protection”
    “Blocked”
    “Not trusted”
    The Windows User Account Control message may look like this.
    You may get this message when installing, uninstalling, or updating HP software for Windows from the product CD, from software previously downloaded from www.hp.com, or from running HP Smart Install by connecting a printer via USB cable.
    The solution will vary depending on the products that you are using. Here is a helpful document for HP printers that will walk you through what you can do.
    John
    I work on behalf of HP.

    Hey @kat54 ,
    Welcome to the HP Forums!
    I understand you're receiving an error stating "This program has been blocked for your protection."
    You can read about this error here: "Blocked", "User Account Control", "Not trusted", or "Return code: 1625" message in Windows.
    You will find a link for Printers here which directs you to the HP Update Software Utility to resolve the problem. When you install this utility ensure you select version 5.005.002.002 or later.
    Make sure the utility you've downloaded is for your exact product and operating system.
    If this does not resolve the issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
    Thanks!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Blocking neighbors from using my signal

    I've recently noticed that someone has been using my signal to get online. Is there a way to block others from using my signal? I have two eMacs that are hard-wired to a di-614+ router. I have disabled the WEP and SSID Broadcast wireless settings but have not noticed any difference. Any help will be greatly appreciated.
    Thank you.

    You indicate that your Macs are hardwired to the router. If you don't have any need for the wireless option, you can turn it off entirely. This is explained on page 11 of the manual that is available from the D-Link web site.
    Matt

  • I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

    I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

    There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
    You can block others from using your Apple ID by changing your password.  There is no way to erase what was already downloaded on to someone else's device, for obvious reasons,

  • I bought a used iphone from a friend and I am not able to use it in Ethiopia. It is carrier blocked. Can you please help how could I unlock my iphone 4?.

    I bought a used iphone from a friend and I am not able to use it in Ethiopia. It is carrier blocked. Can you please help how could I unlock my iphone 4?.

    Unlikely as you do not meet there requirements for unlocking.
    Have your friend the provided the phone contact them.  Based on your statements I am concluding he was or still is an AT&T customer, that is one of the requirements of getting the device unlocked.

  • I'm in syria and they blocked me from using any VPN service please help without VPN i can't open the store help please ( using iphone 5 version 9.1.4 )

    I'm in syria and they blocked me from using any VPN service please help without VPN i can't open the store help please ( using iphone 5 version 9.1.4 )

    There is nothing that anyone here on a user forum can do to help you.  If it is a local issue in Syria, then you need to take it up with your phone company or authorities there who have prevented you from using VPN.
    Nobody here can help you.

  • X husband blocked us from using face book on home computer. how do i re install it so i can access it again

    x husband blocked us from using face book and u tube on home computer.
    what do I need to do to re istall it ??

    There is no reinstall process for facebook it is a website that you visit stored on servers far away from your Mac.
    However, If you go to System Settings, then Parental Controls, you will however need to be logged in as Administrator or know the password.

  • I accidentally blocked images from a website (facebook) how do i fix it?

    i accidentally blocked images from a website (facebook) how do i fix it?

    With Facebook on display, click on the [[site identity button]] and then on More Information. This will open up the page info dialog.
    First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
    Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.
    This should hopefully resolve your issue, but also see [[Images or animations do not show]].

  • I have a ransomware virus on chrome browser that blocks use of browser  How do I remove this virus.  I scan with norton and shows no virus

    I have a ransomware virus on chrome browser the blocks use of browser  How do I disable virus?

    It's likely the "FBI Moneypak browser hijack" which works by hijacking Javascript in the web browser so you can't escapte.
    What you do is press command tab to get to the Finder, then from the Apple Menu select > Force Quit on Chrome.
    Apple menu > System Preferences > General >
    Uncheck “Restore windows when quitting and re-opening apps“
    Apple Menu select > Shutdown, restart and don't start up Chrome.
    Use Safari to find out how to disable loading of previous web pages in Chrome ( I don't use it )
    Once Chrome loads, then Reset it's caches etc.
    If you know the domain name of the malicious site, then feed it here
    https://www.google.com/safebrowsing/report_badware/

Maybe you are looking for

  • BAPI_SALESORDER_CREATEFROMDAT2 - quanity =0 when consumed& exposed as WSDL

    Dear all, Any help on this is greatly appreciated. We have developed a .NET application that will consumed the create order bapi web services that's being generated from WAS 6.20. ICM is set up and working properly. However, when we executed the .NET

  • Display image on jsp page

    I have to display image on jsp page with some text output. This image is already saved at a location parallel to web-inf and is generated dynamically using a servlet. I have used img tag html to display the image. Other outputs are taking their value

  • Pricing error with condition type HI02

    Hi Friends, I have problem in pricing procedure for customer hierarchy condition type HI02. I have created the condition node i.e.6222 and assigned customer 1500 and i also maintained the condition record for the same and also put in the pricing proc

  • Oracle.sql.BLOB.setBinaryStream() throws UnsupportedFeatureException

    Does anyone know why oracle.sql.BLOB.setBinaryStream(long pos) throws an UnsupportedFeatureException? It seesm to me that if the method were rewritten as: public OutputStream setBinaryStream(long pos) throws SQLException {      return getDBAccess().n

  • Regarding  logical system

    Hi can any body help me how to assign logical system to business system in SAP XI.please send me screen shots if anybody have it.