My Anyconnect Secure Mobility Client drops the connection suddently and is unable to re-connect until I restart my laptop

Hello all,
My company has deployed AnyConnect Secure Mobility Client 3.1.04059 and we use Windows 7
The client works fine most of the time, but all of a sudden the connection drops. I can see both the Windows Network and Sharing Center and Cisco AnyConnect suddenly disconnected. This happens most of the times that I change to another location with a different wi-fi network. With my past Windows 2003 and AnyConnect versions (not sure which one that was), the VPN connection would be recovered shortly after re-connecting to the new wi-fi, but with this version it will never allow me to connect to the new wi-fi. Sometimes, if I use the troubleshoot manager from Windows, it will reset my network adapter and that will allow me to connect to the new wi-fi network. Most of the times it won't.
In those cases, I need to close all programs, log off and log back into Windows. Some other times that will not work either and I will need to restart the whole machine. Restarting the Anyconnect related services alone does not help.
I am worried because today I lost the connection all of a sudden in my own home, while any other device could easily connect to the wifi. Anyconnect will simply say that it is unable to connect. After many tests I had to reset the computer.
Am I the only one seeing this problem? Any advice anyone can give me?
Thanks in advance,
Antonio

So it seems that I was barking at the wrong tree :)
After a bit more research on-line, I found that changing the Power management options for the Wireless network adapter resolved the problem.
I went to Control Panel> Device Manager> right-click on Wireless Network Adapter> Properties > Power Management tab > Uncheck 'Allow the computer to turn off this device to save power'
So far so good. Hope this helps others.
Best,
Antonio

Similar Messages

  • AnyConnect Secure Mobility Client v3.1.04066 "The VPN client driver encountered an error"

    Hello, I am a software engineer and have been trying to connect to my client's VPN using the AnyConnect Secure Mobility Client (version 3.1.04066) and keep receiving the error "The VPN client driver encountered an error. Please try again or restart your system."
    I am on a Windows 7 system with an intel i7-2670QM cpu. My computer model is an HP Pavilion dv7.
    I have tried uninstalling the software, re-installing it. I've tried restarting my system multiple times through the process. I've checked the registry and made sure the name was setup correctly. I have checked and made sure that the correct services are not enabled. I have also tried what was suggested on the support page and checked the integrity of catroot2 as well as renaming it and regenerating the folder. None of these have been able to fix my problem.
    For information, this is the message history when I try to connect:
    [12/8/2014 8:55:49 AM] Ready to connect.
    [12/8/2014 9:27:19 AM] Contacting vpn.[hostaddressremoved].com.
    [12/8/2014 9:27:22 AM] Please enter your username and password.
    [12/8/2014 9:27:29 AM] User credentials entered.
    [12/8/2014 9:27:30 AM] Please respond to banner.
    [12/8/2014 9:27:31 AM] User accepted banner.
    [12/8/2014 9:27:31 AM] Establishing VPN session...
    [12/8/2014 9:27:32 AM] Checking for profile updates...
    [12/8/2014 9:27:32 AM] Checking for product updates...
    [12/8/2014 9:27:32 AM] Checking for customization updates...
    [12/8/2014 9:27:32 AM] Performing any required updates...
    [12/8/2014 9:27:32 AM] Establishing VPN session...
    [12/8/2014 9:27:32 AM] Establishing VPN - Initiating connection...
    [12/8/2014 9:27:33 AM] Establishing VPN - Examining system...
    [12/8/2014 9:27:33 AM] Establishing VPN - Activating VPN adapter...
    [12/8/2014 9:27:33 AM] Establishing VPN - Attempting to repair VPN adapter...
    [12/8/2014 9:27:33 AM] Disconnect in progress, please wait...
    [12/8/2014 9:28:22 AM] Connection attempt has failed.
    [12/8/2014 9:28:24 AM] Ready to connect.
    I have tried every kind of search I can think of to find any other solutions to try, and I cannot find anything else. Does anyone have any other recommendations of what to try in order to be able to connect to my client?
    -TheJayDude

    Yes, I am sorry to say that several people have seen the same issue.  It seems like the issue is specific to Yosemite and Anyconnect. My very technical staff and I have tried many things.  The default route is missing and the file /var/run/resolv.conf is also missing which means that both the route and DNS server are messed up.  We re-added the default route manually which allows us to ping the servers and even access them via the IP address
    Run the command below before starting the VPN to get the default route
    netstat -nr | grep default
    Then run the following to re-add the default route.
    route add default xxx.xxx.xxx.xxx
    BUT there is no way that I can find to fix the DNS entry. 
    We tried re-adding the DNS entries in the /var/run/resolv.conf  and then restarting the DNS service
    $ sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist                                                                              
    Password:
    $ sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist 
    BUT THIS DOES NOT WORK!
    If anyone can help us solve the DNS issue, at least we have a work-around for our technical people until Cisco and/or Apple can resolve it.
    Here is a link to the same issue at Cisco.
    https://supportforums.cisco.com/discussion/12334071/cisco-anyconnect-secure-mobi lity-client-os-x-yosemite-vpn-not-working-if-mac

  • Cisco AnyConnect Secure Mobility Client using discrete graphics on Mac

    Hello,
    I use your Cisco AnyConnect Secure Mobility Client to connect to my University's VPN. The programme is supplied to me by my University so I presume it licenses it for its students such as myself.
    I am writing to let you know the Cisco AnyConnect Secure Mobility Client uses the discrete graphics card on my MacBook Pro whenever it is running. I cannot quit the Client, that will end my VPN session, but at the same time using the discrete graphics card is a drain on the battery for no good reason; Cisco AnyConnect does not display any visuals that I am aware would require the use of an NVidia Kepler card with 1GB VRAM. The application's code perhaps needs to be rectified so it does not depend on the discrete graphics card when clearly (as the attachments show) it does not need a discrete graphics card to render its very simple interface.
    Cheers.

    If your company has the Cisco IPSec protocol open you can use the Mac's built-in VPN settings.
    However, if those ports are blocked by your local service (Starbucks or w/e) then you will have to use the AnyConnect VPN, which is done over SSL (https).

  • Connections drop when using Cisco Anyconnect Secure Mobility Client

    Folks I have a strange issues. I have a few laptops that I'm testing using the Cisco AnyConnect Secure Mobility Client Network Access Manager. We like the interface and overall are happy, but have one nagging issue. Periodically the connection drops when using the client, and the only way to reconnect is to choose the Network repair option on the client. That fixes it just fine, but we shouldn't have to do this. The same clients using the built in WIndows supplicant do not have this problem. We are on version 3.0.07059.

    Right now I'm testing on a single access point (autonomous) with WEP! The same laptop works fine without the Cisco client. Usually it is several hours, 12 or more when it happens, but I've seen it less than that. And I've seen it up for over a day and a half. At this point I just don't trust the client to roll out to a larger audience.

  • Cisco AnyConnect Secured Mobility Client not saving the VPN url after disconnecting from session/restarting client

    Hello there.
    I am having a problem with Cisco AnyConnect version 3.1.04072. When one of my colleagues disconnects from the VPN session, closes out the program, and then later on, reopens the client, the address that he manually entered did not save and it's defaulting on the two now-defunct VPN servers listed.
    Here's an example to see if it makes more sense:
    -User opens Cisco AnyConnect. By default, there are two selections available on the pulldown:
    SSLVPN.abcdefg.com
    access.abcdefg.ca
    These two VPN servers are now defunct and we use a new VPN server:
    access.abcdefg.com
    The user has to manually type it in. He is now able to connect. However, when disconnected. Regardless if the program is closed or not, it does not save the new VPN server address, rather goes back to the default two VPN servers listed.
    I've checked XML, HTML, registry keys, sys files, dll files to see if I can change the default servers manually. No sign of it.
    I'm hoping that someone out there knows a solution to fix it.
    Thanks in advance!

    Hi Vergel ,
    You can create Anyconnect client profile on ASA. In this profile , you can define the hostname/IP that you wish to connect , along with hostname/IP that should be displayed on the client.
    In the client profile , you can define these parameters - "HostName" and "HostAddress" as "access.abcdefg.com" so that any user , who tries to connects , will see "access.abcdefg.com" as the name displayed in the anyconnect connect field.
    On the client, the xml profile (C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile) [Win 7] can be seen using those parameters as follows:-
            <HostEntry>
                <HostName>access.abcdefg.com</HostName>
                <HostAddress>access.abcdefg.com</HostAddress>
            </HostEntry>
    Ref:- http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/anyconnectadmin30/ac03vpn.html#89103
    Additionally, you can try to delete preferences.xml file to remove the redundant hostnames from the anyconnect connect filed.
    Path for preferences.xml is C:\Users\Cisco\AppData\Local\Cisco\Cisco AnyConnect Secure Mobility Client (Win 7),
    Hope this helps.
    Regards,
    Dinesh Moudgil
    P.S. Please rate helpful posts.

  • AnyConnect Secure Mobility Client Connection Issue

    Hello all,
    I am specifically having issue of unable to connect do VPN using AnyConnect Secure Mobility Client. This issue is only happening on my Windows7 machine. All of this use to work before properly without any issue. All of sudden now I am getting below error when I initiate the AnyConnect client from last few days. The errors are as below in sequence:
    1) Posture Assessment Failed: Hotscan prelogin error
    2) An Error has occured while running HotScan. Please attempt to connect again
    Message HIstory shows below:
    Wed Feb 05 00:34:28 2014] Posture Assessment: Required for access
    [Wed Feb 05 00:34:28 2014] Posture Assessment: Checking for updates...
    [Wed Feb 05 00:34:30 2014] Posture Assessment: Updating...
    [Wed Feb 05 00:34:32 2014] Posture Assessment: Initiating...
    [Wed Feb 05 00:34:37 2014] Posture Assessment: Failed
    Wed Feb 05 00:34:28 2014] Posture Assessment: Required for access
    [Wed Feb 05 00:34:28 2014] Posture Assessment: Checking for updates...
    [Wed Feb 05 00:34:30 2014] Posture Assessment: Updating...
    [Wed Feb 05 00:34:32 2014] Posture Assessment: Initiating...
    [Wed Feb 05 00:34:37 2014] Posture Assessment: Failed
    Any idea whats causing this issue on my machine?
    Thanks,
    bws

    What are the prelogin checks specified in your dap.xml file? Verify your client meets those checks.

  • Network becomes limited or unavailable as soon as i connect to cisco anyconnect secure mobility client, version - 3.1.05170

    Hiee,
    I am using cisco anyconnect secure mobility client, version - 3.1.05170 , in my windows 8.1 PC to access vpn to my office desktop. But as soon as i connect cisco anyconnect client, my wifi networks becomes limited or unavailable. Thus, i am not able to get remote access to my office desktop. And not even able to access any other websites also. But as soon as i disconnect from the cisco anyconnect vpn client, every thing becomes normal, and the exclamation mark from the network icon also disappears.
    kindly help me in this regard.
    Thanks and regards
    Neeraj

    There are a few things to consider here:
    - The IPSec VPN client is EoL, so even if we consider this as a bug, it wouldn't be fixed
    - fixing the file server access would break the DHCP renew which means there is no completely clean way to fix this, at least not at the IP level since the client can't route to the same destination using 2 different paths.
    Is there any chance we could do a static policy NAT for the DHCP traffic so it appears to come from another IP? It's twisted and it may not work (the client might use the DHCP server IP embedded inside the payload and not the source IP) but if it does, then we'd fix the overlap.
    Could the server use another IP address for the DHCP service (much like using a loopback for a certain service on a router?)
    A third solution would be to NAT the destination server IP on the ASA for traffic from the IP pool going to the server. We'd need DNS doctoring as well to resolve the server's name to the NATted IP. This way the server would appear from the VPN client as being at a different IP, thereby fixing the overlap.
    All these potential solutions are quite involved... you may be better off wityh a simpler design: splitting of your server into 2 or using something else to do DHCP for the VPN clients.

  • Error "Version 3.1.04063 of the Cisco AnyConnect Secure Mobility Client is already installed" - help !

    hi,
    I've tried to install AnyConnect Secure Mobility Client on my computer (Mac OS 10.6.8), I've never installed it before on this computer, however when I want to install  i got the message
    "Version 3.1.04063 of the Cisco AnyConnect Secure Mobility Client is already installed"
    I would be thankful if anyone could help me with this problem !!!

    Would I be correct in assuming that you are trying to do a manual install of the AnyConnect client when you get this error? Have you ever used this MAC to connect to an ASA and to establish a VPN? If so it is quite likely that AnyConnect was installed in that on line session and does not require a manual install.
    HTH
    Rick

  • Connection attempt failed. Please try again. Cisco AnyConnect Secure Mobility Client on Windows XP SP3 -

    When trying to connect with Cisco AnyConnect Secure Mobility Client on Windows XP SP3 getting the following error:
    Function: CTransportWinHttp::SendRequest
    File: .\CTransportWinHttp.cpp
    Line: 1170
    Invoked Function: HttpSendRequest
    Return Code: 806 (0x00000326)
    Description: WINDOWS_ERROR_CODE
    Function: CTransportWinHttp::SendRequest
    File: .\CTransportWinHttp.cpp
    Line: 1178
    Invoked Function: CTransportWinHttp::handleRequestError
    Return Code: -30015479 (0xFE360009)
    Description: CTRANSPORT_ERROR_UNEXPECTED
    and finally I get the following message:
    Function: ConnectMgr::processIfcData
    File: .\ConnectMgr.cpp
    Line: 2763
    Invoked Function: ConnectMgr::processIfcData
    Return Code: -30015443 (0xFE36002D)
    Description: CTRANSPORT_ERROR_CONN_UNKNOWN
    Connection attempt failed.  Please try again.
    Any ideas, thanks,
    Ashok.

    Hi Harry,
    I only wish I were more up to speed on all of the security technology. I will contact the network administrator and pass your request to him.  I will let you know the results (probably later today).
    Here is a little background on this issue (optional reading).  All clients worked fine up until around the end of September 2013. Then, a rash of Windows updates came along.  Around Sept. 20th, I noticed I could no longer connect using the VPN.  So, I uninstalled (Mobility Client) but was not able to re-install as the https://site was not longer able to be reached.  I got the standard Microsoft 'Diagnose Connection Problems'.  So I manually installed the 'Mobility Client' but only get errors.  However, I'm only guessing at the 'AnyConnectProfile.xml'.  I may have the settings all wrong.  Don't know.
    We also noticed that all of our Windows 7 clients work fine.  None of the Windows XP clients work any longer.  I figured it was 'time to upgrade' all of our Windows XP clients.
    Regards,
    Stan

  • Cisco AnyConnect Secure Mobility client software has VERY slow file transfers from system on the VPN, about 1/10 of non-VPN.

    I'm running Win7, and with the Software only AnyConnect Security Mobility client Version 3.1.04072
    I've found that copying a file from a system on the VPN runs at about 1/10 the speed of getting a file from a system that is NOT on the VPN.

    first poster -
    "Downloads from random internet sites are 5-10 times faster than anything from a server on the VPN."
    Your corporate network may just have too little bandwidth, your taking a poor internet route between carriers (ISP's are often maxed out believe it or not), there is a speed an duplex problem or you have a bad MTU. test all of them. your pc's MTU should be 1300. MAX on all interfaces. use the setmtu.exe tool.
    Jcohen - if you disable the IPS on the ASA does the slow transfer problem go away?

  • Anyconnect Secure Mobility client 3.1.05187 external DNS issues in Windows 8.1

    I am using AnyConnect Mobility client  3.1.05187 on Windows 8.1 machine and for last couple of days I am not able to connect to external sites.
    There are two network adapters active:
    Ethernet (IP and DNS address obtained automatically)
    Cisco AnyConnect Secure Mobility Client Connection (Tunnel Mode (IPv4): Split Include)
    Cisco AnyConnect Secure Mobility Client 3.1.05187 VPN Statistics Details(Thu Jan 29 12:43:45 2015)
    Connection Information
    Tunnel Mode (IPv4): Split Include
    Tunnel Mode (IPv6): Drop All Traffic
    Duration: 00:03:23
    I have checked for 'do not change default gateway' setting but it's not displaying for VPN connection.
    I hope someone can help me out.

    I'd start with installing the latest version of 3.1 and also try latest version of 3.0
    Michael
    Please rate all helpful posts

  • Windows 8 64 bit issues with Cisco AnyConnect Secure Mobility Client version 3.1.04072

    I am having an issue with the Cisco AnyConnect Secure Mobility Client version 3.1.04072 on a Windows 8 64 bit laptop.
    I am able to create the VPN connection but the connection will not allow data to be transferred.
    Stats from a manual connection:
    Cisco AnyConnect Secure Mobility Client Version 3.1.04072
    VPN Stats
        Bytes Received:  14375
        Bytes Sent:  0
        Compressed Bytes Received:  0
        Compressed Bytes Sent:  0
        Compressed Packets Received:  0
        Compressed Packets Sent:  0
        Control Bytes Received:  0
        Control Bytes Sent:  0
        Control Packets Received:  0
        Control Packets Sent:  0
        Encrypted Bytes Received:  7820
        Encrypted Bytes Sent:  1207
        Encrypted Packets Received:  9
        Encrypted Packets Sent:  3
        Inbound Bypassed Packets:  0
        Inbound Discarded Packets:  0
        Outbound Bypassed Packets:  0
        Outbound Discarded Packets:  0
        Packets Received:  4
        Packets Sent:  0
        Time Connected:  00:03:01
    Protocol Info
        Inactive Protocol
            Protocol Cipher:  RSA_3DES_168_SHA1
            Protocol Compression:  None
            Protocol State:  Disconnected
            Protocol:  DTLS
        Active Protocol
            Protocol Cipher:  RSA_3DES_168_SHA1
            Protocol Compression:  Deflate
            Protocol State:  Connected
            Protocol:  TLS
    OS Version
        Windows 8 : WinNT 6.2.9200
    Log from the data transmission software:
    24/12/2013 12:51:13 - Application version = 1.11.28.0
    24/12/2013 12:51:13 - Lodgement Library Version =  1.11.28.0
    24/12/2013 12:51:13 - Connection Method =  INTERNET
    24/12/2013 12:51:13 - DIS Connection Type = Automatic
    24/12/2013 12:51:13 - VPN Client =  ACTIVE
    24/12/2013 12:51:13 - Check Available Connections =  NOT ACTIVE
    24/12/2013 12:51:13 - Windows 8 (6.2.9200 SP )
    24/12/2013 12:51:13 - Language: English (Australia)
    24/12/2013 12:51:13 -
    24/12/2013 12:51:13 - Connected to ISP via LAN
    24/12/2013 12:51:13 - Checking for presence of VPN client.
    24/12/2013 12:51:13 - VPN client found. (C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpncli.exe)
    24/12/2013 12:51:13 - The Cisco AnyConnect Secure Mobility Client application is in use.
    24/12/2013 12:51:18 - Terminating Cisco AnyConnect Secure Mobility Client in progress ...
    24/12/2013 12:51:18 -
    24/12/2013 12:51:18 - Checking Cisco AnyConnect  version.
    24/12/2013 12:51:19 - Cisco AnyConnect Secure Mobility Client (version 3.1.04072) .
    24/12/2013 12:51:19 - Copyright (c) 2004 - 2013 Cisco Systems, Inc.  All Rights Reserved.
    24/12/2013 12:51:19 - Config file directory:C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\
    24/12/2013 12:51:19 -
    24/12/2013 12:51:19 - Loading profile:C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\ELS-IMelAde-TCP.xml
    24/12/2013 12:51:19 -
    24/12/2013 12:51:19 - Initializing the VPN connection.
    24/12/2013 12:51:19 - Ready to connect.
    24/12/2013 12:51:19 - Ready to connect.
    24/12/2013 12:51:19 - Contacting ELS-IMelAde-TCP.
    24/12/2013 12:51:23 - Authenticating user.
    24/12/2013 12:51:23 - Connected to VPN concentrator.
    24/12/2013 12:51:23 - Establishing VPN session...
    24/12/2013 12:51:23 - Checking for profile updates...
    24/12/2013 12:51:23 - Checking for product updates...
    24/12/2013 12:51:23 - Checking for customization updates...
    24/12/2013 12:51:23 - Performing any required updates...
    24/12/2013 12:51:23 - Establishing VPN session...
    24/12/2013 12:51:23 - Establishing VPN - Initiating connection...
    24/12/2013 12:51:24 - Establishing VPN - Examining system...
    24/12/2013 12:51:24 - Establishing VPN - Activating VPN adapter...
    24/12/2013 12:51:24 - Establishing VPN - Configuring system...
    24/12/2013 12:51:24 - Establishing VPN...
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connected to ELS-IMelAde-TCP.
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connection to VPN client return code = 0.
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connecting : Connecting to 203.202.43.2.
    24/12/2013 12:51:45 - Error in ConnectToDIS - Socket Error # 10060
    Connection timed out.
    24/12/2013 12:51:46 -
    24/12/2013 12:51:46 - Disconnecting from the VPN concentrator.
    24/12/2013 12:51:46 - Disconnect in progress, please wait...
    24/12/2013 12:51:46 - Detaching AnyConnect, please wait...
    24/12/2013 12:51:47 - Detached.
    24/12/2013 12:51:47 - Disconnected from VPN concentrator.
    24/12/2013 12:51:47 - *****************************************************
    24/12/2013 12:51:47 -               END OF LODGEMENT PROCESS
    24/12/2013 12:51:47 - *****************************************************
    Issue history:
    - Previously running Cisco VPN client on Windows 8 64 bit laptop (VPN working and able to transmit data over VPN)
    - Upgrade to Windows 8.1 stopped the VPN client working
    - Refreshed system back to Windows 8 and reinstalled all software
    - Cisco VPN client would not install on system
    - Cisco AnyConnect Secure Mobility Client installs and is able to connect to VPN host
    - Cisco AnyConnect Secure Mobility Client downloads and installs software from VPN host
    - Data transmission software returns error code #10060
    Any assistance would be greatly appreciated.

    anyone found the fix for this?

  • CTRANSPORT_ERROR_TIMEOUT with Cisco AnyConnect Secure Mobility Client 3.1.05170

    Hi,
    I use Cisco AnyConnect Secure Mobility Client 3.1.05170 to connect to my company network and it has been working successfully for a while and until Sunday evening Feb 8.
    Today, this solution is no longer working and I've reproduced the same issue on 3 different Mac's which have 10.10.2 (on 2 Mac's) and 10.9.5 (on 1 Mac).
    I can navigate on internet without any problem but when I launch the connection in Cisco AnyConnect Secure Mobility Client, it time outs and I get the following errors:
    Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type information sent to the user: Contacting <company server name removed for security reasons>.
    Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnui[7926]: Initiating VPN connection to the secure gateway https://<company server name removed for security reasons>
    Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: processConnectNotification File: ../../vpn/Agent/MainThread.cpp Line: 11572 Received connect notification (host <company server name removed for security reasons>, profile myaccess1.xml)
    Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: resolveHostName File: ../../vpn/Common/Utility/HostLocator.cpp Line: 718 Invoked Function: CHostLocator::resolveHostNameAlt Return Code: -29294571 (0xFE410015) Description: DNSREQUEST_ERROR_EMPTY_RESPONSE
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: getHostIPAddrByName File: ../../vpn/Common/IPC/SocketSupport.cpp Line: 322 Invoked Function: ::getaddrinfo Return Code: 35 (0x00000023) Description: unknown
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: resolveHostName File: ../../vpn/Common/Utility/HostLocator.cpp Line: 730 Invoked Function: CSocketSupport::getHostIPAddrByName Return Code: -31195124 (0xFE24000C) Description: SOCKETSUPPORT_ERROR_GETADDRINFO
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: ResolveHostname File: ../../vpn/Common/Utility/HostLocator.cpp Line: 839 Invoked Function: CHostLocator::resolveHostName Return Code: -31195124 (0xFE24000C) Description: SOCKETSUPPORT_ERROR_GETADDRINFO failed to resolve host name <company server name removed for security reasons> to IPv6 address
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: logResolutionResult File: ../../vpn/Common/Utility/HostLocator.cpp Line: 913 Host <company server name removed for security reasons> has been resolved to IP address 144.24.19.20
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Writing to hosts file:  144.24.19.20    <company server name removed for security reasons> ###Cisco AnyConnect VPN client modified this file. Please do not modify contents until this comment is removed.
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: respondToConnectNotification File: ../../vpn/Agent/MainThread.cpp Line: 4893 The requested VPN connection to <company server name removed for security reasons> will target the following IP protocols and addresses: primary - IPv4 (address 144.24.19.20), secondary - N/A.
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: getUserName File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 1939 PasswordEntry username is nwipfli
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: PeerCertVerifyCB File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 857 Return success from VerifyServerCertificate
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: SendRequest File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 1422 Invoked Function: curl_easy_perform Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT 28 : Error
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: sendRequest File: ../../vpn/Api/ConnectIfc.cpp Line: 3191 Invoked Function: CTransport::SendRequest Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: connect File: ../../vpn/Api/ConnectIfc.cpp Line: 481 Invoked Function: ConnectIfc::sendRequest Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: TranslateStatusCode File: ../../vpn/Api/ConnectIfc.cpp Line: 3008 Invoked Function: TranslateStatusCode Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT Connection attempt has timed out.  Please verify Internet connectivity.
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: doConnectIfcConnect File: ../../vpn/Api/ConnectMgr.cpp Line: 1963 Invoked Function: ConnectIfc::connect Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type warning sent to the user: Connection attempt has failed.
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: processIfcData File: ../../vpn/Api/ConnectMgr.cpp Line: 2614 Content type (unknown) received. Response type (host unreachable) from <company server name removed for security reasons>:
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type warning sent to the user: Unable to contact <company server name removed for security reasons>.
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: processIfcData File: ../../vpn/Api/ConnectMgr.cpp Line: 2724 Unable to contact <company server name removed for security reasons>
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type error sent to the user: Connection attempt has timed out.  Please verify Internet connectivity.
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: connect File: ../../vpn/Api/ConnectMgr.cpp Line: 2050 ConnectMgr::processIfcData failed
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: initiateConnect File: ../../vpn/Api/ConnectMgr.cpp Line: 1181 Connection failed.
    Any idea about a solution ?
    Thanks in advance
    Nicolas

    There seem to be much more problems with 3.1.04049
    Especially with certificate authentication.
    I opened some TAC cases.
    Try 3.1.04063 that came out at 07-24-13.
    TAC said that there are some fixes in it...

  • Problems with Cisco AnyConnect Secure Mobility Client 3.1

    Since I upgraded to Cisco AnyConnect Secure Mobility Client 3.1, I am unable to start my VPN.
    The service does not start correctly anymore. I tried reinstabut no help.
    Could anyone help me please?
    Here my logs.
    Thank you very much.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: FileMoveFiles
    File: ..\Common\Utility\NativeSysFileCopy.cpp
    Line: 388
    Invoked Function: ::FindFirstFile
    Return Code: 3 (0x00000003)
    Description: The system cannot find the path specified.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: wWinMain
    File: .\InstallHelper.cpp
    Line: 354
    Invoked Function: FileMoveFiles
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: FileMoveFiles
    File: ..\Common\Utility\NativeSysFileCopy.cpp
    Line: 388
    Invoked Function: ::FindFirstFile
    Return Code: 3 (0x00000003)
    Description: The system cannot find the path specified.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: wWinMain
    File: .\InstallHelper.cpp
    Line: 354
    Invoked Function: FileMoveFiles
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: FileMoveFiles
    File: ..\Common\Utility\NativeSysFileCopy.cpp
    Line: 388
    Invoked Function: ::FindFirstFile
    Return Code: 3 (0x00000003)
    Description: The system cannot find the path specified.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: wWinMain
    File: .\InstallHelper.cpp
    Line: 354
    Invoked Function: FileMoveFiles
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Information
    Source      : acvpnva
    Description : Function: CInstaller::PerformAction
    File: .\VACon.cpp
    Line: 522
    Successfully installed service acsock
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Warning
    Source      : acvpninstall
    Description : Function: XmlLocalACPolMgr::GenerateLocalPolicy
    File: .\Xml\XmlLocalACPolMgr.cpp
    Line: 415
    Local Security Policy file already exists and therefore will not be generated
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x00001F84) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x00001F20) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\ are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script\
    Date        : 07/23/2013
    Time        : 08:49:49
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x000016C0) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:50:10
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x00001F34) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:50:19
    Type        : Information
    Source      : acvpnui
    Description : Cisco AnyConnect Secure Mobility Client GUI started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:50:20
    Type        : Information
    Source      : acvpnui
    Description : Initializing vpnapi version 3.1.04059 ().
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: ClientIfcBase::getCurrentState
    File: .\ClientIfcBase.cpp
    Line: 2058
    API service not ready
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.nam.api
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: L2Api::attach
    File: .\L2Api.cpp
    Line: 87
    The NAM/L2 Api could not be found or failed to load, skipping.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.websecurity.api
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: SSApi::attach
    File: ..\common\SSApi.cpp
    Line: 51
    The Web Security API could not be found or failed to load, skipping.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Error
    Source      : acvpnui
    Description : Function: MFDartBox::getDARTInstallDir
    File: .\MFDartBox.cpp
    Line: 332
    Invoked Function: MsiEnumProductsExW
    Return Code: 259 (0x00000103)
    Description: No more data is available.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: ClientIfcBase::getStats
    File: .\ClientIfcBase.cpp
    Line: 1723
    Called when API service not ready.
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: CSocketTransport::connectTransport
    File: .\IPC\SocketTransport.cpp
    Line: 981
    Invoked Function: ::WSAConnect
    Return Code: 10061 (0x0000274D)
    Description: No connection could be made because the target machine actively refused it.
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: CIpcTransport::connectIpc
    File: .\IPC\IPCTransport.cpp
    Line: 252
    Invoked Function: CSocketTransport::connectTransport
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: CIpcTransport::terminateIpcConnection
    File: .\IPC\IPCTransport.cpp
    Line: 404
    Invoked Function: CSocketTransport::writeSocketBlocking
    Return Code: -31588319 (0xFE1E0021)
    Description: SOCKETTRANSPORT_ERROR_NO_SOCKET_HANDLE:The socket transport does not possess a valid socket handle.
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ApiIpc::initIpc
    File: .\ApiIpc.cpp
    Line: 423
    Invoked Function: CIpcTransport::connectIpc
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ApiIpc::initiateAgentConnection
    File: .\ApiIpc.cpp
    Line: 336
    Invoked Function: ApiIpc::initIpc
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ApiIpc::run
    File: .\ApiIpc.cpp
    Line: 570
    Invoked Function: ApiIpc::initiateAgentConnection
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ClientIfcBase::attach
    File: .\ClientIfcBase.cpp
    Line: 606
    Client failed to attach.
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Error
    Source      : acvpnui
    Description : Function: CMainFrame::OnCreate
    File: .\mainfrm.cpp
    Line: 342
    Invoked Function: The VPN service is not responding or available.
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Information
    Source      : acvpnui
    Description : Function: ClientIfcBase::detach
    File: .\ClientIfcBase.cpp
    Line: 438
    Shutting down vpnapi
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Error
    Source      : acvpnui
    Description : Function: ConnectMgr::activateConnectEvent
    File: .\ConnectMgr.cpp
    Line: 1352
    NULL object. Cannot establish a connection at this time.
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Information
    Source      : acvpnui
    Description : Cisco AnyConnect Secure Mobility Client GUI exiting, version 3.1.04059 , return code 0 [0x00000000]
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x0000162C) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkP

    There seem to be much more problems with 3.1.04049
    Especially with certificate authentication.
    I opened some TAC cases.
    Try 3.1.04063 that came out at 07-24-13.
    TAC said that there are some fixes in it...

  • Configuration File goes bad in Cisco AnyConnect Secure Mobility Client.

    Hi everyone
    We are running a Cisco ISE Version: 1.3.0.876 Patch 1 for 802.1X deployment (Wired + Wireless) with posture assessment where the supplicant for the endpoint is Cisco Anyconnect Secure Mobility Client v4.0.00061.
    Symptoms:
    The Configuration is working fine both Wired and Wireless, but the issue is that some user suddenly start to have issue connecting Wireless with the Cisco Anyconnect dislpaying System Scan: Bypassing Anconnect Scan
    (Some info are masked)
    and When I digged into this found that the configuration.xml files in the path: C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager\newConfigFiles is renamed automatically into configuration_bad.xml.
    Workaround:
    Copy and paste a normal configuration.xml into the same path again.
    Restart the Cisco anyconnect services or restart the Endpoint.
    Question:
    So was wondering if anybody has a clue why this configutatyion.xml turned into bad??
    I'm goin to dig into the Event Viewer for logs about this before going to Cisco TAC

    first poster -
    "Downloads from random internet sites are 5-10 times faster than anything from a server on the VPN."
    Your corporate network may just have too little bandwidth, your taking a poor internet route between carriers (ISP's are often maxed out believe it or not), there is a speed an duplex problem or you have a bad MTU. test all of them. your pc's MTU should be 1300. MAX on all interfaces. use the setmtu.exe tool.
    Jcohen - if you disable the IPS on the ASA does the slow transfer problem go away?

Maybe you are looking for