My apple account not working

I bought a game online .It charge on my credit card already but not work on my game.Please help . Thankyou

LeesaHeeley wrote:
When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account.
When fist setting up your new iphone you will be asked to log in with an apple id and password. If this did not happen you can then do as you suggested going to settings to itunes and app store and add your apple id login. This apple id login must have already been created for the iphone to accept it. If this apple id is already created but is not being accepted by your iphone you then should shut down your iphone and restart the device.
Good luck.

Similar Messages

  • Why is my Apple ID not working in iTunes and App Store on my iPhone? Nothing happens if I click buy for apps or music. If I then go to settings/iTunes App Store my Apple ID is not there. If I then enter ID and password it does not save or link to account?

    Why is my Apple ID not working in iTunes or App Store on my iPhone? When I try to buy apps or music it asks for Apple ID so I enter my info and nothing happens. When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account. I do not have this problem with iPad ID is stored and can be used in App Store and iTunes. I have just upgraded to 5c and it's still a problem.

    LeesaHeeley wrote:
    When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account.
    When fist setting up your new iphone you will be asked to log in with an apple id and password. If this did not happen you can then do as you suggested going to settings to itunes and app store and add your apple id login. This apple id login must have already been created for the iphone to accept it. If this apple id is already created but is not being accepted by your iphone you then should shut down your iphone and restart the device.
    Good luck.

  • Why is my apple id not working in itunes store?

    why is my apple id not working in itunes store?

    When is it asking for it ?
    If you are updating from iOS 7+ to 7.0.4 then did you have Find My iPod enabled on it ? If you did then it might be asking for the password for your account when you set that 'on'.

  • My apple ID not working in Apple Store.

    My apple ID not working in Apple Store, in iTunes work fine and with my iPhone work fine too but in my iMac only works in iTunes, App Store and iCloud say "Incorrect password or username", I reset my keychain with the same result. My OS is 10.7.4
    In my iPhone I can acces to App Store, Itunes and iCloud but in my iMac only work in iTunes and online iCloud (icloud.com), the App Store and iCloud system say "Incorrect password or username" and never can loging.
    My Apple ID its confirmed and I buy in iTunes perfect...
    Please help, I have this problem for a long time...

    This is quite strange, as MAS is really the same store as iTS. It's the same account.
    This issue has to be something else going on with your system, and not at the Store's end.
    How about make a new user account for testing. And see what happens when you try to use your Apple ID through there.

  • Apple password not working in iCloud since I updates my email address. Still lists my old email but doesn't accept old password. How do I access?

    Apple password not working in iCloud since I updates my email address. Still lists my old email but doesn't accept old password. How do I access the cloud?

    To change the iCloud ID ("email") you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you do this you may find that the password for your old ID isn't accepted.  If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I can't open my i phon because apple id not working what i do ?! my i iphon 4s ios8

    i can't open my i phon because apple id not working what i do ?! my i iphon 4s ios8

    Welcome to the Apple community.
    Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

  • HT4623 apple account not verified by icloud

    I tried to activate my find my Iphone4 but my apple account not verified by icloud.
    Any help much be appreciated. I'm travelling in Asia in Jan. is this features (find my phone works) as well as my Ipad will be in travelling as well.

    Are you able to sign into icloud.com with that account?

  • I am having real problems with my hotmail account not working on my iMac

    I am having real problems with my hotmail account not working on my IMac but works absolutely fine on my Iphone 5. Can anyone help with the setup for iMac. I am with BT for my Broadband. I am cionverned if I route my Hotmail accoutn to GMail will iy stop working on my Ipone.

    How are you accessing Hotmail?  Via your web browser?  Are you using Apple Mail?  Outlook?
    The answer will be different depending on how you want to access Hotmail.
    If you are using an email client (like Apple Mail, Outlook, Entourage, etc.)) then you need to set up a mail account in your email software.
    The incoming Hotmail settings are these:
    Incoming server: pop3.live.com
    User name: Your full Hotmail email address (aka "me @ hotmail.com" or "me @ live.com")
    Password: Your Hotmail password
    POP port: 995
    Use SSL to connect : yes
    The outgoing Hotmail settings are:
    Outgoing server: smtp.live.com
    User name: Your full Hotmail email address
    Password: Your Hotmail password
    SMTP port: 587 (override the default port if necesssary)
    Use SSL to connect : yes

  • Apple remote not working

    My Apple remote is not working with my MacBook. The Mac OS X 10.5 Help Knowledge Base says to go to Security > Systems > and Disable remote control infrared receiver. I don't have a systems button or box nor the checkbox to Disable remote control infrared receiver. And, my MacBook has an infrared receiver.

    Hi Focus,
    I have the same problem. When I update from TIger to Leopard the front row apple remote still working. But is been a long time the last time i used and now on 10.5.2 osx the apple remote not working as I imagine.
    I read some answers that help me understand better the problem. My check box of "disable remote.."is unchecked and I saw a "pair" button and try to pair with my apple remote. The tips told me to HOLD "menu" and "next" buttons of apple remote to pair him with computer. And Works fine. So I try to push only Menu button (as I've done so many times on tiger) but still does not working. So I realize the command to "start front row from apple remote" now on Leopard 10.5.2 is MENU+NEXT buttons and does not anymore only menu button. For me works like this.
    While I write this answer I try again push and hold only MENU button and after almost 2 or 3 seconds holding button appears on screen an virtual image of my apple remote signaling to replace the battery, may be now will be works only on push menu, but I need to change the battery first.
    I hope help somebody.

  • Apple remote not working, is there a way to setup Apple TV without the remote

    Apple remote not working, is there a way to setup Apple TV without the remote

    Welcome to the Apple Community Sylvia.
    There is no way to set up home sharing on the Apple TV without the original remote from Apple, you will need to purchase a new remote from the Apple Store.

  • Why is my Apple ID not working after I've reset it, Why is my Apple ID not working after I've reset it

    Why is my Apple ID not working after I've reset it? After I change it the password icon pops up and I type the new password in and it says it's wrong? What's happening

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Apple account not receiving any Email

    HI sir / madams
    my apple account not receiving any email / help/advice thanks

    Hello angurkawsar, 
    Thanks for participating in the Apple Support Communities. 
    It seems like you can't receive email on your iPhone. If you're using the Mail app, this article has some troubleshooting steps that may help:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Best Regards,
    Jeremy  

  • Apple TV not working with new softwear iOS 7, Apple TV not working with new softwear iOS 7

    Since updated softwear on iPad to 7.0 Apple TV not working?

    I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly).  Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
    I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.

  • Apple tv not working with panosonic TH-50PX75U old.

    Apple tv not working with a 3-4 year old Panasonic TH50PX75U tv, works fine on all other tv's in the house. HDMI cables seem to be fine they work with the DVD and DVR. Ratio is set to auto, apple logo on screen when booting up then Goes away. Seen twice for a split,nano second the apple tv menu on screen. Then in upper left corner of tv a grey box appears with HDMI 2 appears. any help would be great... Thanks in advance, Tom

    I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly).  Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
    I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.

  • Apple tv not working

    apple tv not working - message NO SIGNAL  for this plasma. Was working before. Major difference a download from itunes 4 g movie yesterday. I have tried rebooting the apple device more than once. Switched off all plugs,checked all plug positions.  Can anybody help please? Australia. Maggie.APple tv oroblem

    Good morning Winston.
    thanks.
    i eventually  found a one-liner in THE APPLE MANUAL which fixed it.
    i.e.  Resetting the APPLE TV.   The instruction was to use the silver small operating APPLE device,
    HOLD DOWN THE MENU BUTTON AT THE SAME TIME AS THE  BLACK DOWN BUTTON UNTIL THE WHITE LIGHT ON THE  APPLE TV STARTED BLINKING RAPID  WHICH IT DID. I then released the pressure ON THE BUTTONS and  within a few moments, the TV screen cleared and it started working again.
    The interesting part is that I had thought a reset of the APPLE TV may have taken place when it was unplugged. BUT NO IT DID NOT.
    Also, there was much helpful comment in the forums but not this simple solution which I found ON the WEBSITE APPLE MANUAL.
    HOPE THE  ABOVE IS CLEAR ENOUGH TO HELP OTHERS. Maggie 3/1/2015

Maybe you are looking for

  • I am unable to capture using Matrox MXO2 LE with Preimere Pro CS6 and Windows 8

    I have a Matrox MXO2 LE and trying to capture with Preimere Pro CS6.  My OS is Windows 8 and it sees my Matrox Device via my device managers.  No option comes up in CS6 to allow me to actually capture.  I am a new beginner with both Matorx and Preime

  • How do I convert PDF to word on a mac?

    Hi, I'm new to apple products and i'm struggling to find how i convert a pdf file to word.  On a PC the option automatically popped up on the file or edit and right click.  There is no right click on a mac from what I can see and there is no option i

  • Diskuse.exe crashes when path & filename is longer than 255 chars

    Hi All, I am trying to use diskuse.exe v1.3 from Win2003 Reskit to report over 1TB of data. My problem is that diskuse crashes and does not complete. Just before the crash I get an error: WARNING: Could not get SID for g:\personalfolders\adodds\my pe

  • Early release version of Oracle Spatial sdoapi

    Hi, When am trying to access the geometry object using sdoapi ver 8.1.7 it's returning null . Could you please provide me an early access verion of the sdo api for Oracle 9i Spatial. regards Debasish Sahu.

  • Transaction problems in Stateless EJB

    I have problems as follows. my client is a servlet which call method B in stateless ejb, In side of method B, there is a loop from which antoher method C in this same ejb is called repeatedly. I want each call of method C being a separate transaction