My apple calendar shuts off after a second on some days not others

My google calendar turns off after a second on some days and not others

Hello JPhardboiled,
To save battery power, the camera turns off automatically after 1 minute of non-operation. To turn on the camera again, just press the shutter button halfway.You can change the auto power-off time with [: Auto power off] Setting the Power-off Time/Auto Power Off To save battery power, the camera turns off automatically after a set time of idle operation elapses. If you do not want the camera to turn off automatically, set this to [Disable]. After the power turns off, you can turn on the camera again by pressing the shutter button or other buttons.1 Select [Auto power off]. Under the [] tab, select [Auto power off], then press <>.2 Set the desired time. Select the desired setting, then press <>.
Even if [Disable] is set, the LCD monitor will turn off automatically after 30 min. to save power. (The camera’s power does not turn off.)

Similar Messages

  • Shooting a video works sometimes, but sometimes it shuts off after one second without recording any video

    Have had the Turbo Droid for only 3 days and just tried to shoot video. Twice it worked, but more often it seems to begin recording, but shuts off after one second without recording anything.
    Not sure what I'm doing wrong to cause this to happen.
    Can you help?
    Thanks!

    Thanks, EfrainM_VZW.
    Haven't seen any error messages. Occasionallly, but only rarely, the video will record 1-2 frames, but most of the time it just shuts down. I have tried it with and without the rubber-grip case; taking off the case had no effect. The video still would not function.
    When you tap the video camera icon, it tries to shoot video and seems to begin to record, but one (or two) second(s) later, it beeps and stops. Rarely with a frame or so of video; mostly nothing is recorded.
    The still camera works great! Love being able to touch it anywhere to grab a snap.
    BTW, my partner and I got identical phones at the same time last week. His video has the exact same problems as my phone.
    Another point: I downloaded the Google Camera and can shoot video just fine through that camera. But not through the stock Motorola camera that came with the Droid Turbos.
    I'm starting to think we got phones from a defective batch.
    What do you think?

  • Rebel T3 keeps shutting off after few seconds of videoing

    I purchased a Rebel T3 for my daughter a few months ago.  We are having trouble getting it to video.  It keeps shutting off after a few seconds.  It has a clean class 10 - 32gb card in it.  Help please!  (we have used a couple different cards in it, they all do fine & take excellent photos, just MAJOR problem trying to use the video mode)  I have a T1i & have no trouble with the video on mine.

    The manual may state Class 6 as the minimum speed for reliable HD video capture, but that it is most definitely not the fastest card supported by the camera.
    The camera is able to take advantage of cards rated for speeds up to 45MB/s which should be at least 2x faster than the fastest Class 10 cards and about 4.5x faster than a Class 10 card operating at minimum spec of 10MB/s.  A Class 10 card is rated for minimum throughput of 10MB/s write speeds. So, it should be between 7-8x faster than a Class 6 card performing at it's specified minimum 6MB/s speed.
    So you really need to be looking at the write speed of the SD cards you buy.  But, this assumes that the SD card is the problem which it may not be.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • Macbook Pro shuts off after few seconds of gray screen

    Help - I came home to discover my power cord had died and my laptop turned off due to no power. I used a friend's power cord to turn it on later that night and send some emails. I bought a new power cord the next day, plugged in, and turned  the laptop on. It stayed on the gray screen with a spinning wheel beneath the apple logo for a while. I restarted it and it turned off after a few seconds of the gray screen. An empty bar flashes twice horizontally at the bottom before the spinning bar begins.
    I tried booting in safe mode, but it would just stay on the gray screen. I tried doing shift+command+v and received a message about keys out of order and disk error full, can't repair. I was able to boot from the install disc, and when I click "Repair Disc" I get the same erros. Not sure what to do now?

    Migg7 wrote:
    Would my time machine data be preserved with this?
    Well this is the big gamble. You really don't know for sure.
    TimeMachine has gotten corrupted from a failing original drive and then unable to restore properly to a new drive.
    It's not like you can access the files on a TM drive directly and cherry pick what you need and leave the rest. It's all or nothing.
    If you go erasing your only other copy on the boot drive, which the files still could be accessed from another boot drive, and if you find out the TimeMachine drive can't restore, then your up the creek without a paddle right?
    So if your able, create a data recovery drive and try to rescue your second copy of the files on the boot drive or restore the TM drive to the second boot drive , so this way your files can be accessed directly if you need it and you have two copies again.
    Once you can direclty access your files then you can go about erasing and installing on the internal boot drive.

  • I have a new mac pro.  i may have changed the settings and now when i log on it shuts off after 10 seconds. not long enough to check settings.

    i am new to mac book pro.  i was checking out the settings and must have changed something as now when i log on, it shuts down within 10 seconds and i don't have time to get into the settings. the top tool bar is red/pink.  please help!

    Close all windows and quit all applications.
    Hold the option key down and click the "Go" menu in the Finder menubar.
    Select "Library" from the dropdown, then "Preferences" folder.
    Look for these two files.
    com.apple.desktop.plist
    com.apple.systempreferences.plist
    Right click each  one of those and select " Move To Trash" from the contextual menu.
    Restart the computer.

  • IPod will not charge, shuts off after three seconds

    Pretty much what it says up there. When plugged in, the screen comes on for about five seconds, then the device turns back off. I REALLY want to avoid a DFU restore, because I didn't back up my apps. Any way to get it to turn on?

    I am afraid you will not be able to get your iPod Touch to turn back on. My iPod Touch did the same thing yesterday, and it would not turn on. Your only option (as far as I know) is to hold the home button while plugging your ipod into the computer. Then you will be able to go into iTunes and restore your iPod.

  • My ipod classic turns on with apple logo then shuts off about 30 seconds later, when plugged in my windows and itunes will not recognize it.

    earlier my itunes told me that my files were corrupted and I needed to restore, so I did.  In the middle of the restore I lost internet connection. Now my computer and Itunes will not recognize my Ipod and if it is not plugged in when I turn the Ipod on it only shows the apple logo then shuts off after 30 seconds.  If it is plugged in it will charge, but Itunes and Windows will not recognize it.  I have tried the menu + select shutoff multiple times with no change.  All it will say while it is charging is do not disconnect.

    The clicking sound is your iPod Hardisk, trying to retract and find the boot sector unsuccesfully.
    Hopefully, you can do the iPod Disk Diagnostic as in this great post by tt2., it wont fix your problem, but let you know, how dire is your Hardisk health.
    So only as a last resort, one way, to get the stuck Hardisk head free, is to bang the iPod on a rubber mouse pad, when you reset it, but do it at your own risk, some very lucky guys got it working again for the next 14 months, like myself.

  • HP DV6-6B25TX shutting off after 10 to 15 seconds irrespective of battery power or AC power

    Hi,
    MY DV6-6B25TX is shutting off after 10 to 15 seconds irrespective of battery power or AC power.
    Following is the complete scenario of what happened during the last few weeks:-
    Two weeks back i was using the laptop with the AC adaptor plugged in for charging, the battery got charged upto 99% then it stopped charging and the battery icon text displayed, 'Plugged in, Not Charging'.
    A week back the battery was 20 %, after plugging in the charger, still the same message 'Plugged in, Not Charging'.
    Now the laptop doesnt respond to the power key when the battery is inserted.
    If i remove the battery and again put it back, it starts without pushing the power button and shuts off after 10 seconds, i.e. even before starting Windows.
    It shuts down even when on Bios Screen, so OS is definately not the issue.
    When i connect the charger and press the power button, same thing i.e. starts and shutts off after 10 to 15 seconds irrespective of BIOS screen or Windows Boot.
    I removed the ram and but it back again but still the problem persists.
    Also there is no question of overheating due to dust as i have barely used the laptop for a few hours, the laptop is around 6 months old and under warranty.
    Please Advice ASAP.
    Thanks in Advance.
    This question was solved.
    View Solution.

    Honestly, something is preventing the battery from being charged. The notebook shutting down seconds after reinserting the battery is a good indication the battery just isn't getting charged. This could be a failed battery, charger, charging port, or motherboard in rare instances.
    Since it is in warranty, I recommend contacting HP support as there is no easy fix for this on the forums. It is a hardware issue.
    The number for support in the U.S.A. and Canada is 1-800-474-6836.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Apple Mac book pro just turns off after few seconds after turning on

    Hi Folks,
    I just turned on my Apple Macbook pro. Whenever, I turn it on, the progress bar comes with the Apple symbol and after few secs, it turns off by itself. Have tried to turn on the MBP number of times but the same result
    Please help...
    Regards,
    Nadeem

    Correction:
    When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
    - MacBook does not work on batery - evenif  i disconect batery - no result
    - I try with diferent power adapter - no result.

  • Ibook remote vga monitors switching off after 30 seconds. (EMERGENCY)

    Hi,
    I run teleprompter for a major band. I use two white dual usb ibooks as they will run OS9. The only real pro prompter application for the mac never made it successfully to os X (accuprompt). I use two mini VGA to VGA adapters and run 100 ft of VGA cable to two VGA monitors. For no reason I can think of one day the monitors started going blank after 30 seconds as if they were going to sleep. The machines are set to NEVER sleep as are the displays, for battery AND power adapter use. I get a message on the monitors saying "not in optimum mode" and I usually just pressed the auto adjust button on the samsung (syncmaster 730B) flat screen and it would work fine. Now they both shut off after 30 seconds with no indication on the laptop displays. I swapped out the monitor and it was the same. I swapped out the computers with (sick) older ones and they worked. Apparently something changed on the computers........ at the same time. Puzzling......
    I deleted the entire preferences folder. Rebuilt desktop, reset nvram and such in open firmware. It is not application based as the desktop disappears from the remote samsungs as well. What could be causing this.... what am I overlooking.... I'm wracking my brain..
    many   Mac OS X (10.4.3)  

    How would one check this Dave?
    Just flex the connections; it would probably be pretty obvious if something's starting to break. There might also be corrosion or dirt in the iBook's video connector that could cause a problem, though I wouldn't think the symptoms would be the monitors going to sleep, but it's possible; different monitors react differently to signal loss.
    Dave, I filter power through a "Monster Power Conditioner"
    (http://www.monstercable.com/power/)
    Even with those power conditioners, it might still be possible to be picking up ground loops in the video feed unless you're tying the entire electrical system, stage and offstage, into a single high-quality ground point. Using a passive hum suppressor transformer or wideband isolation transformer on the VGA feeds might be helpful. The Gefen units I mentioned should also break any ground loops that might be present. For additional information on video ground loops, this site may be helpful (though you may already know all this already).
    Good luck.

  • Macbook Pro 13 turns off after few seconds.

    When I turn MacBook pro 13 on sound play and fans run at full speed but it runs turns off after few seconds.

    Correction:
    When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
    - MacBook does not work on batery - evenif  i disconect batery - no result
    - I try with diferent power adapter - no result.

  • Iphone 3g shuts off after the apple loading screen then cuts back on

    Iphone 3g shuts off after the apple loading screen then cuts back on by its self but when i connect it to a charger it works fine also my on/off button is unresponsive (i havent dropped it or wet it so im confused why its doing this)

    Welcome to the discussions,
    normally you could try to reset the phone by holding the sleep and home button until the Apple logo comes back. But since the sleep button is unresponsive, try to restore "as new iPhone", if necessary without using the backup afterwards, in case the backup contains corrupt data.
    Restoring: http://support.apple.com/kb/HT1414

  • Facebook on my iPad shuts off after a few seconds.  This also happens on Pinterest occasionally .

    FFacebook on my iPad Shuts off after a few secondary.  Pinterest does this occasionally also.

    Try closing all apps in the multi-task window and try again.
    1.Double-click the Home button.
    2. Swipe the app's preview up to close it.
    3. Preview will fly off the screen.

  • IPod Touch shuts off after being locked 4 a while

    Hello, My iPod touch 4th generation will shut off after being locked. Sometimes when I lock it for 3 minutes it'll shut off I will click the sleep/wake button or home button and it'll do nothing, So I have to reset it by holding sleep/wake button for 30 seconds or something. One time I set a alarm for 3 minutes and it went off and it showed on the iPod's screen and froze! What I did was: settings, general, auto-lock and put to never because if I'll let it lock for more than 3 or 5 minutes it'll shut off. Any one know a reason this might be happening?
    Thanks for reading

    Try:
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • Macbook Pro freezes, shuts off for 10 seconds, and then returns to normal

    My 13.3" Macbook Pro has this issue of shutting off for 10 seconds and then turns back on to normal. Usually it happens whenever I wake the laptop with the lid open, whenever I open the lid "too fast" from clam shell sleep, and whenever I reopen the lid after when I realized that I needed to check something else. Every time I start using the Macbook Pro from these situations, everything works fine for about 20 seconds and then suddenly everything freezes and shuts off temporarily. Then after about 10 seconds, everything turns back on again. I do not know why this occurs, but I had this issue the 3rd week I purchased this. Is this a normal thing or is this an issue with possibly the motherboard?

    take a look at this topic, maybe will help:
    http://discussions.apple.com/thread.jspa?threadID=2420192&tstart=15

Maybe you are looking for

  • Communication between multiple page flow portlets

    Hi, I am working on weblogic portal 8.1. I've been struggling to communicate between different page flow portlets, I have a login page flow portlet and i need to submit login details to indeex page after login action is done. I am able to do this by

  • Is it a path problem, or what is it?? Please...

    Hi every one! I am just trying to open a Serial Port This is my code package demo2; * Titre : * Description : * Copyright : Copyright (c) 2002 * Soci�t� : * @author * @version 1.0 import java.io.*; import java.util.*; import javax.comm.*; public clas

  • Will InDesign CS3 export to PDF on it's own?

    I am planning to purchase InDesign CS3 but do not have Adobe Acrobat Pro.  Will I still be able to print or export an InDesign file to pdf without it?  If not can I buy PDF Converter Professional to make this possible?  I am working on a PC.  thank y

  • Airport Express broadcasting both WPA2 Personal and WPA2 Enterprise?

    We were recently scanning for wireless access points for a client using a product called Vistumbler.  The client had two older Airport Express wireless routers, set to use WPA2 Personal, but Vistumbler was detecting both WPA2 Personal and WPA2 Enterp

  • Deskjet 3050 no longer printing wireless or wired

    I have an HP Envy widows 8. and deskjet 3050 J610a and it no longer prints.  I keep getting an error message :"Unable to Communicate with Printer".  it worked just great a couple days ago and nothing has changed since then other than it stopped print