My Apple Diagnostic Reference code is: 4HDD/11/4000000:SATA(0,0). What do i do next?

I have run a diagnostic test, which returned the ref. code: 4DD/11/4000000: SATA(0,0). But this code does not appear in the code list.
Have any other had the same experience? What do I do now?

See this thread:
https://discussions.apple.com/thread/4023442?tstart=0
Looks like a HDD failure .

Similar Messages

My imac8,1 has an error code of 4HDD/11/40000004:SATA(0,0) what does this mean and where or how can i get this fixed?

I need my computer although it is old i bought it in 2008, i just can not afford a new computer. Could someone possibly tell me the meaning of my error code?

The error shows a problem with the hard drive, and as it says SATA, it may be related to the SATA connector of the hard drive or the logic board. I recommend you to take it to an Apple Store or reseller to get it diagnosed, so you will know what the problem is and they will provide you a solution. If the problem is in the logic board, this may be an expensive repair

Error 4hdd/11/4000000:sata ssd - using Apple diagnostics on a MacBook PRO 15" with 512GB SSD. My trackpad goes berserk.

I have a MacBook PRO early 2013 15" (10,1). 16 GB RAM, 512GB SSD. Running Mac OS X 10.10.
A couple of weeks ago my trackpad started being unresponsive and within a couple of days was not usable. Searched for solutions and have tried them all, (control option shift L power); (Option cmd R P power) (checked for dirt around the trackpad) (Cleaned the trackpad in case there was oil on it from my skin) (shut the screen and leave for a few minutes and try again).
I ran apple diagnostics (twice) and got the error 4hdd/11/4000000:sata ssd.
I have noticed that the computer recently will also randomly reboot.
When I connect the bluetooth mouse it sometimes has problems connecting; i.e. won't pair, but once paired works fine.
Anyone had similar issues. This is my 5th MacBook and the first time I've had a problem.
John

Ah, here we go. The alert can be safely ignored. Your drive is fine:
Symptoms
When you test your Mac notebook using an SSD or Flash storage drive with Apple Hardware Test (AHT) diagnostics, you may encounter the following message if the test is looped multiple times:
4HDD/11/40000000:SATA
Resolution
The alert is erroneous and generally takes multiple loops of Apple Hardware Test to induce.
Before starting Apple Hardware Test, looping can be enabled or disabled by pressing the L key on the keyboard. If the message appears and there are also other issues with the computer that appear to be related to the solid state drive (SSD) or Flash storage drive, schedule an appointment at an Apple Retail Store or contact an Apple Service Provider.
Excerpt from Apple Support article: http://support.apple.com/kb/TS4356

My iMac won't start up -- makes the usual start up sound, get the gray screen with the apple, and whirling icon goes endlessly below it. apple hardware test code is 4MOT/2/40000004:0x3d2fdb90

Prior to shutting it down, I had to force quit Safari. I has been running a little slow lately, but nothing major.
Apple Hardware Test code shows
4MOT/2/40000004:0x3d2fdb90
anyone know what that means?
I have a late 2006 intel-based iMac with the iSight camera, running Snow Leopard

Thanks SO MUCH! I am having nightmares about all that could be lost. If the fan can be fixed, then I can cope with the backing up and maybe relieve the hard drive so it gets faster. As Murphy's law would have it, I just bought an external drive but haven't had a chance to set it up to automatically back up. Your reply makes me feel much better... There is hope that I can lip along with this old iMac until I can afford a new one.

4HDD/11/40000004: SATA (0,0) - Apple Extended Hardware Test

Hi!
My mid-2009 13-inch Macbook Pro's performance deteriorated last month. It become super super slow.
So, out of curiosity, I performed an Apple Extended Hardware Test. And here is the error code: 4HDD/11/40000004: SATA (0,0)
I didn't expect that problem to arise so I don't have any back-up of my essential files. I tried to copy my files to an external drive but copying a 600MB folder required me to wait for more than 30 min before receiving the error code which said somthing like "files cannot be copied"
Then, I bought a new 60GB Kingston SSDnow V+ and 4GB Trascend 1066Mhz RAM. I successfully installed Snow Leopard on my new SSD and installed the new 4GB memory. Things went well. I even booted my mac so fast using my new SSD via USB enclosure.
But the problem came when I installed my new drive internally. Flashing question mark appears when starting my Mac. Internal drive is also not recognized by Disk utility when booting my Mac from OS X Installation Disk. Installed my old drive and no success.
I don't know if the problem is the compatibility of my SSD or the SATA cable. For now, I'm booting my Mac on my new SSD via a USB External Enclosure. My old drive is installed internally but it is not recognized. And I find it too inconvenient to use my Mac booting externally (even though the performance is ultra fast) since I'm a college student.
My problems:
a. What to do so that my SSD will be recognized when connected on my Mac internally via SATA?
b. What to do so that I can have a back-up of my very essential files saved on my old drive? (I remember booting from my old drive connected via USB Enclosure took me more than 1 hour, then logging in to enter my password took me to watch that spinning rainbow wheel forever)
P.S. Sorry if you find grammatically incorrect sentences.
I also leave here in the Philippines. And there is no Apple Store here. Apple Authorized Service Centers don't sell the SATA cable. Purchasing the cable via internet is not feasible due to the following reasons: a. My location. b. I'm still a student and I don't have a credit card to pay an online purchase.
Your generous help will be much appreciated.
Here's additional info on my Mac:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,5
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.26 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP55.00AC.B03
SMC Version (system):          1.47f2
Serial Number (system):   xxxxxxxxxxx
Hardware UUID:          84AA25C3-B3EC-5FD4-B9EA-03885D9E41B6
Regards, Christ Denn - Philippines

Well, usually DW (Disk Warrior) may be able to fix that; see this discussion:
https://discussions.apple.com/thread/424787?start=0&tstart=0
You need to use DW from either an external boot disk or the DW CD since repairs cannot be made on a volume that you are booted up from.
You can take a look at DW here:
http://www.alsoft.com/diskwarrior/index.html

Mac Mini late 2012 with fusion drive running slow and has error code 4dd/11/4000000: sata (1,0) after running diagnostic

Hi,
I have a mac mini late 2012 i7 with 16 GB RAM, fusin drive 1.12TB. It became very lagging recently and after doing the first verify disk, I was prompted to reclone using time machine. Anyway I did a full restoration with my image and the problem still persist. And I did a verify disk again and this time it indicates the disk was ok and I even did a permission repair. Problem still persist and I did the PRAM reset and nothing helps.
I did a fresh mavericks installation. Initially it seems ok but after transfering more data into the system, the lagging seems to comes back. My suspicion was a hard disk failure on the 1tb hard drive.
Finally I did a diagnostic abd the test has this error code 4dd/11/4000000: sata (1,0) .
Does this means one of my drive is giving problem? As fusion drives comes with 2 drive I believe. One is 128GB SSD and the other is 1 TB drive.
My warranty has expired.
Thanks in advance for any help or advise

Hi IIIaass,
Thanks for the reply. I have search on youtube regards to the apple fusion drive. However, I didn't find anything useful. I would like to know if it consists of 2 hard drives or just 1 drive. And if it consists of 2 hard drives, can I buy another ssd and merge the 2 together.
I do not have the tools right now to open up the mac mini. I have ordered it online and its on the way. If you have any information on this, please share with me.
Thanks

E-Rec Reference Code in the Publication tab should not appear after enddate

hi,
There is a requirement from the client after the end date of the publication ,the reference code should not be displayed to the candidate in the Candidate page ,presently the same is manually done in the system by changing the status to withdrawn.
Is there any way by which we can automate the process by change in customising by which the reference code does not appear after the end date
Please provide a solution if something can be done in the standard setting or do we require any Zworkflow to be developed for the same.
Regards
RK

Hi RK,
this is nothing the standard supports.
But I would not use a workflow here. As this is a mass handling workflow is no good idea. This is a task for a customer periodical service. Just build a class implementing the periodical service interface which gets all released publications which have a publication end in the past and status released and change their status using the cl_hrrcf_posting_inst_bl. This should be done in a couple of hours. Add the customizing and the issue is solved.
A requirement in this context where a customer workflow is quite handy in my opinion is a customer workflow which closes all postings and withdraws released publications when you close the requisition. This reduces the steps a recruiter has to do and ensures that no candidate applies although you are already done with the requisition.
Kind Regards
Roman

I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS?

I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS? What other options do I have? What can be an approximate cost for fixing this problem?

Of course not. It's a hardware problem, so it can't be fixed by upgrading software. The only option you have got is to take the MacBook to an Apple Store or reseller.
That error indicates a problem with the hard drive. What you have to do is to make a backup of your files and take the MacBook to an Apple Store or reseller, so they can confirm that the problem is the hard drive and not the SATA connector, which could be worse.
If it's a hard drive issue, it's not expensive (about $100-200, depending on the hard drive). If it's a SATA connector issue, the whole logic board may have to be replaced.
Note that you can replace the hard drive yourself if you want, but the cost between doing it yourself and taking the MacBook to an Apple Store or reseller is similar

Why won't apple supply unlock codes

why wont apple supply unlock codes to customers, whe they are quite happy to supply the codes to carriers
i bought an iphone 4 in june i was told it was unlocked, but wasnt informed that the 1st sim inserted would make the phone lock to that specific carrier, (orange)
orange will not unlock the phone as they say they didnt lock the phone to their network,and the phone was bought via a 3rd party (carphone warehouse) so they cant unlock it, i am going round in circles being passed back nd forth all i want is to be able to use another network on my iphone and no one is taking responsibilty for it

yeah i agree, i'm even will to pay the unlocking fee, but they keep saying they haven't locked it, even the lad it the orange shop was baffled by it too, he rang orange cs and they cut him off at the finish oh well i'l just have to keep trying with orange,
i google my query & aparently there's another post in the discussions similar to this
https://discussions.apple.com/thread/4382197?start=0&tstart=0
also just had another email from cpw they say its a condition off apple that all phones sold unlocked apart from apple have to be locked via the 1st sim , ridiculous if you ask me , i could of easily just went to apple if i'd known

Where do I change the default Mobil phone # used by apple to send code verification.

Where do I change the default Mobil phone # used by apple to send code verification. They use a cell number that is not valid. I changed it on my profile in the cloud but still they showing the old one for sending SMS code for keychain verificatio. Any idea where to change?

Here:
https://appleid.apple.com

E-Recruiting reference code

Hi,
is it possible to define the reference code as a mandatory field with screen flexibilization on the publication page?
Thanks and regards
Gabriel

Hi,
These might help:
http://help.sap.com/saphelp_erp2005/helpdata/en/17/d992411663ad5fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/232278cad20d25e10000000a1553f7/frameset.htm
Reward points if helpful,
Thank You,
Message was edited by:
Arun Sundararaman

E-Recruitment -- Reference Code for Job Posting

When I create the Job Posting, SAP E-Rec create a system generated reference code. Can this code be changed / customizied?.

Hello Vishal,
there is a BAdI which you can use to implement your logic for generation a reference code. The name of this BAdI is HRRCF00_GET_EXT_CODE. Just create an implementation according to your needs and activate it.
Kind Regards
Roman

How do i make an official complaint about an app? They have stopped access to my account and are trying to extort money via paypal (skirting Apple) to allow me access again!! Who might i contact regarding this behavior? Does Apple have a code of ethics!

Hello community!
How do i make an official complaint about an app? They have stopped access to my account and are trying to extort money via paypal (skirting Apple) to allow me access again!! Who might i contact regarding this behavior? Does Apple have a code of ethics required for apps?
Ive used this app for a couple years now, invested a significant amount of money developing my account over that time (close to a couple of grand id say). The Apps support wont discuss the situation, just demand the cash to reopen my account. There is no anual fee or anything.... Its extrordinary behavior to now be faced with this loss of investment.
I dont wish to go into more detail in the public domain but your help in directing me to the apropriate contact/department would be greatly apreciated. I'm located in Australia.
Best regards,
Mike

All I can suggest is to contact iTunes. You should not have been able to create a new account with the same email address
Apple - Support - iTunes - Contact Us

E-Recruiting: change reference code entered by error

Hi,
how can I change the reference code entered by error (with function "enter external application") in an application?
There is the Workflow 51800042 (ERCAdjEntry) but I don't know how to trigger it...
Thanks in advance for any help and kind regards
Gabriel

Hi Gabriel,
I have never seen this workflow running in any system and i think there is noone who can tell what it is for.
In general there is no function in the application which allows to change the relations of candidacy and application to requisition / posting / publication. Of course you could change on database but you would have to rewrite all related records in IT5132, 5135-5145, IT1001. There is high risk to mess things up and of course no recruiter can do this by hand.
Possible solutions would be reassigning the candidate to another requisition by and reject the original used one. Only problem would be that the candidate can see the wrong assignment in the application list in his start page.
Other way would be the administrator function to delete / deregister the candidate to get completely rid of the wrong entry and enter the candidate again using the correct reference code.
Best Regards
Roman Weise

Can someone tell me the difference of running the apple diagnostic tool that apple has supply online vs the diagnostic they do at apple?

At apple when the "apple genius" check to see if anything is wrong with your macbook hardware. They would connect an ethernet cable to the macbook and run there diagnostic. Are there any difference between either diagnostic test. And does the apple diagnostic test (the one that they supply instruction online) check all hardware inside? I remember see there screen was much different from the diagnostic screen i just ran (which was all gray with a little progress bar.)

Apple Service Diagnostics (ASD) is very time-consuming and produces results that refer to service procedures not available to the general public. It is not available outside of authorized Apple repair facilities. Without supporting documentation, its results could easily be misinterpreted. Apple also has additional diagnostic procedures for certain specific purposes.
Apple Hardware Test (AHT) is faster and more superficial. It performs cursory tests that do little more than check for the presence or absence of operable hardware.
AHT has been superseded with Apple Diagnostics in Macs produced after June 2013.

My Apple Diagnostic Reference code is: 4HDD/11/4000000:SATA(0,0). What do i do next?

Similar Messages

Maybe you are looking for