My apple ID is not working with messenger in iPad3

it says that I don't have an apple ID and must create a new ID and that I can't do either.

I have the exact same problem as "Jan Olsen 1"
I sent them feedback:
"I was given a $25 iTunes gift card.
When trying to log on to my account, my password didn't work (though I entered the correct password THREE TIMES).
I requested help changing the password through an e-mail. Went through the process, changed the password.
I successfully logged on to my account and entered the gift card information and was given a $25 credit.
When I tried to buy mp3s, I was asked to enter my password - AGAIN.
I got one of the following messages each time I tried to enter my NEW password:
'We could not complete your iTunes Store request. An unknown error occurred (5002).
There was an error in the iTunes Store. Please try again later.'
or
'Verification is required.
You must enter your AppleID and password, click Billing Info, and verify your payment information in order to make purchases.
The Apple ID you entered couldn't be found or your password was incorrect. Please try again.'
Don't know where to go from here."
And then, just to log on to this forum, I had to enter my AppleID TWICE! Once, then again to verify my AppleID!
Ridiculous! Frustrating!

Similar Messages

APPLE TV DOES NOT WORK WITH NETFLIX

APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appears

It started working.....!!!!! (It seems someone back there is listening)
I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
TIPS:
I didn´t change any language or video quality configuration (scared to do so)
I changed to ethernet (cable) instead of wireless
My internet plan is 6 Megabytes (it was the same while it wasn't working)
good luck!!

HT202157 My apple TV is not working with light flashing after up date

My apple TV is not working with the light flashing after an up date, what can be done?

same here macbok air 2012 appletv 3 bugs the **** out of me
it just stops randomly after a "while"

My Apple TV is not working with my Macbook pro 13 inch mountain lion after Apple TV upgrade?

My Apple TV is not working with my Macbook pro 13 inch mountain lion OS X 10.8.2 after Apple TV upgrade?
I am getting an error message as soon as I try to connect my Apple TV
An error occurred (-6722) while connecting to the AirPlay device “Apple TV”
it was working fine however after the upgrde it is giving me the above error message

same here macbok air 2012 appletv 3 bugs the **** out of me
it just stops randomly after a "while"

My apple ID is not working with my apple store

My apple ID is not working with my apple store

I have the exact same problem as "Jan Olsen 1"
I sent them feedback:
"I was given a $25 iTunes gift card.
When trying to log on to my account, my password didn't work (though I entered the correct password THREE TIMES).
I requested help changing the password through an e-mail. Went through the process, changed the password.
I successfully logged on to my account and entered the gift card information and was given a $25 credit.
When I tried to buy mp3s, I was asked to enter my password - AGAIN.
I got one of the following messages each time I tried to enter my NEW password:
'We could not complete your iTunes Store request. An unknown error occurred (5002).
There was an error in the iTunes Store. Please try again later.'
or
'Verification is required.
You must enter your AppleID and password, click Billing Info, and verify your payment information in order to make purchases.
The Apple ID you entered couldn't be found or your password was incorrect. Please try again.'
Don't know where to go from here."
And then, just to log on to this forum, I had to enter my AppleID TWICE! Once, then again to verify my AppleID!
Ridiculous! Frustrating!

Why apple password did not work with my Ipod Touch

why my apple password did not work with my Ipod Touch?

Just where are you entering it?
What happens when you try?

Why docking cradle with headset jack for apple iphone 5s not working with iPhone 5s headset

why docking cradle with headset jack for apple iphone 5s not working with iPhone 5s headset.

don't know. what have you done to troubleshoot?

Genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge

genuine Apple lightning charger not working with my iPhone 5S. a notification comes up that's says 'this cable is not a genuine Apple product and may not work reliably' and although the charging symbol comes up, it does not charge - went to Apple in Milton keynes to get a replacement charger this weekend that does not work as well!

Well, if this problems is so old I think it is strange that Apple hasen't fixed the bug long time ago, and certainly after the release of iOS 8.1.
Well, thank you very much for your answer, Lawrence Finch. I think the best thing to do is to send the phone to repair, if there is no solution to fix this by my self. I will anyway call the Apple support tomorrow, but I don't think they will illuminate me...

Apple Tv does not work with youtube and movies on iphone or ipad

I am on my 2nd generation apple TV. Always worked with Youtube, my iphones and ipads and Netflix.
I think it started about a month ago. I can only use Netflix.
If I try YouTube and select a video (even if small) it just keep spinning and never starts.
The same thing happens with my video from iphone 5S, 5, and ipad 2.
Than I went to my sons house with a Apple TV 3rd generation and different wifi,
same thing happens, I can not show a video from my iPhone 5S.
What is going on, did Apple TV change something?
Is this a update that went wrong?
(I have auto update and also checked manually to make sure have latest apple TV FW)
(All iphone and ipads are latest FW).

Hi pcorsaro,
You may need to restore your Apple TV and see if the issue is resolved after that process:
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/ht4367
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Apple 23 Cinema not working with nvidia 5200...help!!!

Hey all!
I have an Apple 23" Cinema that is not working with my Windows XP machine using an NVIDIA 5200 128meg graphics card. The montior, when booting Windows, just flashes its power light 3 times...goes off...then repeats the sequence.
So, I tried a Dell 2007WFP with the XP machine using the DVI port of the card. When booting, it seems like it's going to fire up the monitor (shows splash screen and Windows logo) but then goes blank when it hits the desktop.
Oddly enough, when I plug in my Apple 30" into the DVI port of the NVIDIA card, it works just great. No fuss or muss (other than a resolution change).
The 23" also works fine with my MacPro BTW so I know the monitor is golden.
Any takers on this one?
Thanks in advance!

Hi Talon, I just accidentally came across your thread. Maybe I can help. I own a 23-inch cinema HD display but mine is ADC and I have to run mine through an ADC to DVI adapter.
Anyways on to the discussion...
The nvidia 5200 is a rather old-ish card (or chipset). The feature set in these older cards are not necessarily symmetrically reciprocal (what?) throughout the feature set. In other words, the feature may work in one mode and not in the another mode...etc...
You may have seen these specs on your 5200 card/chipset:
+Dual RAMDACs (up to 400 MHz) for display resolutions up to and including 2048×1536 @ 85Hz+
and thought this would be great, my resolution is less than that @ 1920x1200 on my 23-inch cinema display. However I believe this may be referring only to the vga output signal and not the DVI. Read on...
Further down in the specs for the 5200 card/chipset you'll see:
+DVI support for compatibility with nextgeneration flat panel displays with resolutions up to and including 1600×1200+
Unfortunately, this is not enough resolution to power your 23-inch display at 1920x1200. Windows may even show the resolution 1920x1200 as available (if you're able to get to the screen) but what I think it's not telling you, it that in order for you to be able to use that resolution you'll need to switch to dual mode DVI, and the card does this automatically.
For example: 640x800 to 1600x1200 uses single mode DVI and anything above that (like our 23-inch cinema HD monitors @ 1920x1200) +using this particular card/chipset+ will be using dual mode DVI whether the monitor can support that mode or not. From my experience with my HD cinema it uses single mode DVI.
As someone said above your 23-inch is in *single mode DVI* and from my experience only accepts *single mode DVI input* from the graphics card.
From my understanding of the specs and your description of the delimma, I would suppose that you are able to get the 30 inch display to work because the 30 inch is a *dual mode DVI monitor* and your graphics card does work in dual DVI mode up to your 30-inch resolution but ONLY in dual DVI mode.
Here are the specs on it:
http://www.nvidia.com/page/pg_20040109440047.html
I hope this helps you out.
If you were to ask my recommendation, I'd go buy a new video card that has higher resolution on the single mode DVI output. I can tell you that my ATI 2600 HD Pro (AGP) (windows version, not mac only) has two DVI ports that are both dual mode DVI capable but also dumb down to single mode DVI signaling at high enough resolution to support our 23-inch cinema HD single mode DVI displays.
Good luck!
Dibit

My apple id will not work with ichat., my apple id will not work with ichat.

My ichat will not work with my apple id. How can I make it work without changing my apple ID?

the error message reads:
your account has been disabled
This Apple ID account has been disabled for security reasons. Tap Reset to reset your account
I have reset my account ID but it still does nit work on my IPAD.
Does work on my IMAC and IPHONE

Apple remote contra not working with Lion

I installed Lion and my littele apple remote control does not work anymore with my mac book pro.
Is there any solution for that?
Thanks

It's not working for me either.
I know that Lion doesn't include Front Row, but the remote is not working with any other application (ex. iTunes).
Please somebody help us!

APPLE mouse & keyboard not working with Windows (Bootcamp)

I installed Leopard and Windows XP on my Mac Pro. The installation went very smoothly. Only problem I have is that my Apple wireless keyboard and mouse do not work on Windows (frozen) although they work fine on Leopard. I tried a Logitech wireless trackball and it works fine on both Windows and Leopard. Any suggestion?

Thanks. I upgraded from Tiger and downloaded Bootcamp from Leopard Installation disc ( I did not have a beta version ). I then installed Windows XP SP2 ( brand new, just bought for that purpose ). Wonder if Mac wireless keyboard and mouse are compatible with Window. Everything else work beyond my expectation.

Apple TV does not work with 877W

Hi all,
I am using an 877W as my DSL router and trying to use Apple TV or other Apple Bonjour services over Wireless. It is simply not working although I tried several IGMP configurations. I've seen some references to 877W issues but they were all about bridging between wired and wireless. In my case though everything is on wireless (PC with iTunes, Apple TV and and iPhone to be more specific). I wanted to ask once more as I've also seen references to people having this setup working ok.
interface Dot11Radio0
ip address 192.168.15.1 255.255.255.0
ip nat inside
ip virtual-reassembly
load-interval 30
encryption mode ciphers aes-ccm
ssid Princes
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2472
station-role root
end
I tried with igmp snooping on and off with no luck, also it didn't helped to add 239.0.0.0 as a static group to the interface.
If you have apple stuff working on your 8xxW environment I appreciate if you can share your configuration, any other ideas are more than welcome.
Many thanks,
Cagri

Hi Cagri,
Hope you've found an answer to your problem already, if not I had similar issues trying to get mine to work.
I did manage to get it to work in the end, I've added an article to my blog which goes over what I had to do to get it working.
Basically, configured correct multicast-routing groups, IGMP v3, pim dense-mode on both the radio and BVI interfaces and it started working.
http://www.thehelpdesk.co.nz/2012/01/how-to-use-apple-tv-with-cisco-877w.html
Cheers,
Sully.

Apple Bluetooth Keyboard not working with Macbook??

I copied this from a post on a reply earlier, but thought I'd start a new post and hope that someone has had a similar problem.
I have the new Apple wireless keyboard that doesn't work on my Macbook. Ironically, the only keys that do work are the top row. Screen brighten or dim, Dashboard, speaker volume control etc...
I've connected it and paired it successfully, but the keys just don't seem to work. (delete and arrow keys also work) After a while, my mighty mouse (wireless) start acting funny, or the track pad button on the laptop itself stops working. Shutting of the keyboard at this point doesn't help and I need to reboot the computer.
I've taken it to Fortune Tower in Bangkok where they have a apple support center and he couldn't get it to work on his 17" mac book pro either. He wanted me to leave it, but I took it back to the international departure terminal of the Bangkok international airport, (had to wait for another flight to China to do this) and returned it to the store where I bought it. But they wanted to see the problem and I showed them that it didn't work. Convinced, then then brought out a new one and I wanted to verify that IT worked but same exact problems.
I suggested that they connect it to another computer? Which they did, an Imac and it worked fine. Then they connected it to a Mac Book Pro, (15 inch) and it worked fine there as well.
Could this be a firmware update issue?
Anyone else having problems like this?
I just hope that this isn't a simple setting somewhere that I've overlooked... but I'll try anything at this point.
thanks,

I have exactly the same problem! Macbook Pro 2GHz (so not a very recent one...), OS, firmware, etc updated to the latest. My Mac dealer proposed to do a clean installation of 10.5.2 - did not help. Apple Support told me to uninstall the keyboard and install it again (for more help they want money...) I did - same problem. Only function keys and cursor keys work. Funny thing - during pairing the code can be entered and recognized, but later no character cames through.
The keyboard is perfectly OK, since it works with my MacPro without any problems.
The mouse, on other hand, works nicely so far.
Maybe now will someone give us a wise advice?

My apple ID is not working with messenger in iPad3

Similar Messages

Maybe you are looking for