My Apple ID Password does not work with the iOS Dev Center

Hello, When I go to log in to the Dev Center the password wil not recognise. I have changed it serveral times and it says it is good but when i go to the dev center it does not work? Please help, thanks

How many IDs do you have?
iOS dev?
Mac app dev?
ibooks?
..etc.
How recent was this account activated?
Which browser are you using to log in at the dev center(s)?

Similar Messages

HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps. It also has stop work when trying to down load new Apps. Any suggestions out their???

For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps. Everything else seems to work. Any suggestions out their???

I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working. My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads. I have checked into my ITunes account and the ID and password are correct and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work. My problem seems to be just with trying to use my ID and password when wanting to download new books or apps. I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel. This message appears usually ten minutes after I have tried to make a purchase. At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen. Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

Why should Apple fix the problem? Maybe you should consider NOT upgrading if an expensive piece of (obsolete) software you're running won't work with it...

Brightness control does not work with the bluetooth keyboard connected on my iPad2. Please someone could help me ?

Brightness control does not work with the bluetooth keyboard connected on my iPad2. Please someone could help me ?

Julien-
I have the Apple MC184LL/A Bluetooth Wireless Keyboard. The brigtness control works with mine, as do most of the other functions.
Try cycling the keyboard off and on. Hold the power button until the green LED goes out. Then press it one more time to turn it back on.
You might try resetting the iPad's network. Go to Settings-General-Reset-Reset Network Settings. Then you may need to reconnect your WiFi and Bluetooth.
If that doesn't help, try resetting/rebooting the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart in a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred

Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue

fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?

I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense.

DB Adaptor import table option does not work with the AS400 DB

1. The DB Adaptor import table option does not work with the IBM i-series(AS/400) tables(Both in ESB and BPEL).
2. Also I was not able to import tables from multiple databases into
the same BPEL project.

Both of these issues work in preview version. My earlier posting was based on beta version testing.

Apple USB keyboard does not work with one internal usb port

Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
Guillaume

I'm facing the same problem, found any solutions ?

My ipod touch 3g with ios 5.0.1 does not work with the player's car

ios 5.0.1 update from my ipod touch 3g does not work with various audio players Car pionerr with previous updates had not had problems like I can solve this problem???
thanks

I have tried everything and nothing that happened when you upgrade to ios 5.0.1, I want to know if anyone else has had this problem

Apple av adapter does not work after updating ios 5,01

apple av adapter does not work after ios 5,01. no video on vga monitor. sound goes out on iphone 4 also.

Thank you for your interest. Last night i tried again. It worked. there is still problem, so i could find out it that monitor is going to power saving mode then voice goes out and no view on monitor. I changed the power saving settings. And worked well. Thnx again.

ID & password is NOT working with the Menu Bar CC icon

ID & password that I use for the Adobe CC web page login is NOT working with the Menu Bar CC icon (Mac OS 10.10.2). I have two updates to download, but the ID and/or password is rejected. Also the the "Hint" field is blank.https://forums.adobe.com/discussion/create.jspa?containerType=14&containerID=4670&question =true&subject=ID+%26+password+…

If the is prompts like Creative Cloud wants to make changes to system : Please enter Mac username and Password.

WRT610N disconnects and does not work with Vista or media center extenders like the DMA2200

Linksys and all other router manufacturers advertise the greatness of the wireless 5ghz band (especially with 802.11n), but I’m beginning to have my doubts. It is true that the 5Ghz band is hardly being used so you'll have virtually no one to compete with. However, the 5Ghz distance in no way compares to 2.4Ghz, and as a matter of fact, I find it to be quite terrible. At approximately 20 feet away, both my Linksys DMA2200 and HP notebook barely get 1 bar using the 5Ghz N band with my WRT610N router. In comparison, while using my 2.4Ghz WRT54g router, I get 5 full bars at that range, and at least 2 bars from anywhere else in my house.
I have all Linksys equipment in my house as I have been impressed with all of their 2.4Ghz in the past. However, I’ve recently upgraded everything to dual-band N equipment and found numerous flaws in each of the new devices, plus none of them really even play well together. My setup is: Linksys 610n router, DMA2200 media center extender, and a WUSB600N Dual-Band Wireless-N USB Network Adapter for my laptop – all of which are currently using the most up-to-date firmware. Other devices include a WRE54G extender and Nintendo Wii.
Problem #1) The LELA software with the new N devices doesn't even recognize that my DMA2200 is a media center extender. Using LELA, I should be able to select my media extender and allocate more bandwidth for streaming media. However, since my extender only shows up as an “unknown network device” those options are greyed out. I tried to manually change the device to a media center, but still no go. I suppose you can manually allocate bandwidth in the router setup somewhere, but considering these are all Linksys products, it’s absolutely ridiculous that an option specifically incorporated in the LELA software for a Linksys Media Extender does not work!!!
Problem #2) If you are only using one system with the router, the router might actually work as intended. For most of us though there are going to be at least 2 or more systems connected to the router (wired, wireless, or a combination of the two) such as a PS3, Wii, laptop, PC, media extender, Xbox, etc. If that’s the case, you’re probably screwed because you WILL experience frequent dropouts… ESPECIALLY if just one those clients is a VISTA machine. Check the Linksys forums and you will find that this seems to be a problem with all of the new Linksys routers (610N, 310N, and 110).
Here is a Microsoft article that explains the issue
http://support.microsoft.com/kb/928233/en-us
Problem #3) Because of problem #2 I will never be able to get rid of the dropouts since my network is using one of Linksys’s media center extenders. The DMA2200 is essentially a VISTA PC to some extent and accepts DHCP requests the same as a VISTA PC. Since it is not really a PC though, there is no registry modification that can be done to alleviate the VISTA problem (not that the registry mod really works anyways). So as long as I try to use my DMA2200 wirelessly with my WRT610N router, the frequent dropouts will occur and there’s nothing I can do about it. This is REALLY TERRIBLE since the DMA2200 is specifically designed to be used with the WRT610N router in order to take advantage of the 5Ghz band and wireless N transfer rates. You absolutely need 5Ghz wireless N to efficiently stream HDTV WIRELESSLY, but if you lose your connection every 10 minutes, it is impossible to watch any type of streaming media.
Problem #4) As mentioned already, when the “N” 5Ghz range is working on the WRT510N router, the distance sucks compared to standard 2.4Ghz G, N or mixed mode networks. You can try to make it better by strictly using N products, disabling the 2.4ghz band all-to-gether, and using the wider 40mhz frequency, but it doesn’t really help. The higher 5Ghz band is a more concentrated signal and therefore simply does not reach as far as the lower 2.4ghz band. I wonder why all of these new products state that the 5Ghz range will increase your distance, when in fact it actually makes it worse?
So… basically, this router does nothing that it claims too and is basically rendered useless on any network with a VISTA machine. This has not been addressed by any Linksys firmware updates or VISTA software updates so there is no reason to even consider using this router if you you’re using VISTA or some type of VISTA Media Center Extender such as the Linksys DMA2200.
Although, I’ve always sworn by Linksys in the past, the amount of wasted time, frustration, and horrible support has really changed my view about them. I’ve reverted back to my old trustworthy WRT54g router and had to run cable through my house so that I wouldn’t have to box my DMA2200 extender up and let it collect dust in the attic. It’s really disappointing that I spent all this money to buy this equipment specifically because they’re supposed to work together, but in fact they don’t. Plus what’s the point of having top notch wireless equipment if you have to run cables in order for them to work?
Message Edited by bobbodavis on 11-15-2008 07:37 PM

I have fixed all the IP adresses to avoid the DHCP problem but I still have problems.
I have sereval scenarioes:
1. MC < 1Gb wire > WRT610N < 5.0n WIFI > MX
I can see HDTV on this one but it disconnects
2. MC < 1Gb wire > WRT610N < 2.4b/g WIFI > MX
No HDTV and disconnections
3. MC < 2.4b/g WIFI > WRT610N < 2.4b/g WIFI > MX
No HDTV but no disconnections - but very slow and streaming like youtube
4. MC < 100Mb wire > WRT610N < 2.4b/g WIFI > MX
No HDTV but nice picture - testing for disconnections right now - 30+ min.
Result:
This test was very good. Stabil streaming, no disconnects for an hour. Won't support HDTV but the rest seem to work fine.
5. MC < 100Mb wire > WRT610N < 5.0n WIFI > MX
Not tested yet - looking forward to this - might bring me HDTV.
Result:
This gives HDTV but there is a problem with stability on the streaming but very difficult to see on the picture. Testing for disconnects - now tested for 30 min. - no disconnects.
This looks really promissing.
I am pretty sure that the WRT610N have a problem in the switching part of the router specially when it has to switch from 1G to WIFI. I bought the WRT610N to get HDTV on WIFI and Cisco markets the DMA and WRT610N as a perfect match. But it definately have problems - i still do not understand their silence about this.
I will come back with the last results when I have them
/John
Message Edited by Infraxpert on 01-05-2009 04:38 PM
Message Edited by Infraxpert on 01-05-2009 05:35 PM

Firefox does not work with the USPS self ship web site. Will not allow printing of postage labels.

Some months ago, user "junkbondman" asked this question somewhat poorly, and partly as a result got a non-responsive boilerplate answer by someone who did not read the question's key (if cryptic) point:
> Select a service type. THIS IS WHERE THE WEB SITE FAILS TO WORK PROPERLY
That's too bad, because 16 other users identified "HAVE SAME PROBLEM" - as had, no doubt, a large majority of the 677 viewers of the question. However, maybe to get a better answer we need to start with a better definition of the problem.
The way that the USPS site <cns.usps.com> works to print a label is that addresses (return and forward) are defined, the package weight and value are specified, and then a shipping mode is selected before paying and printing the label. The shipping mode is selected in a section titled "Select a service type", via an embedded table using a vertical scroll-bar that Firefox cannot handle. [Firefox is not alone in that. For example, Safari under iOS cannot scroll the embedded table, but USPS provides a mobile app which mitigates that problem by presenting the table differently.]
Now, it should be stipulated that the table is the worst element in a bad page that does not begin to pass W3 validation [71 errors, 19 warnings - looks like government work]. However, other browsers (like Google Chrome) handle that table with apparent ease. The question is whether Firefox should be able to do so - and, if so, how? As of Fx 33.0, this still does not work.
NOTES:
(1) Unfortunately, to examine this problem requires setting up a USPS account in order to see the shipping page. Setting up the account is easy, but it is a small extra burden to examining the problem.
(2) The problem has been reported to USPS, but has elicited no sign of intelligent life.

''I get the "pointer" mouse cursor when mousing over the blue bar, and I can click on it and scroll the contents as with any other scroll bar, but the bar doesn't move up and down in sync with the content being scrolled: it just stays put. If I do not slide straight down, the blue bar may twitch a pixel left or right.''
Great description! - sorry if you implied that earlier and I misunderstood, but I think that description adds crucial details:
* must hover over the ''blue'' part of the bar (representing the visible part of the table) and
* get the "selector" cursor (the pointing finger), then
* hold that click while scrolling (inside or outside of the table doesn't matter, as long as that click is held) to the needed table row, then
* release the click, and the table stays in place to allow a selection.
Most pages with an embedded scrollable input form (like the box I'm typing in on this page) do not change to the selector cursor when hovering over ''any'' part of the scroll bar, either ''blue'' (representing the visible part of the input form) or ''white'' (the invisible part of the input form). And it is common to click in the ''white'' part of the bar as a way of saying "show what is not visible". You can't do that with these USPS input forms, which behave differently.
Now, even with this method, that remains a very unintuitive (because the scroll bar does not reflect the position, and because the actual ''selections'' never get the "selector" cursor) and awkward way to work, so there is no visual feedback on either part of the operation.
And, I must try to understand why some browsers treat this differently. For example with Chrome (like Firefox), the cursor changes to "selector" in the blue part of the scroll bar, but not in the white part, but with Chrome (unlike Firefox):
- a ''click'' in the white ("invisible") part of the scroll bar or
- a ''drag'' on the blue ("visible") part of the scroll bar
causes movement in the required direction - altogether more intuitive behavior.
Bottom line: At least there is a way to make this work with Firefox, but it is awkward, to say the least. It will require a lot more thought to think about:
* how and why some browsers handle these non-standard input forms with such intuitive behavior (that is, behavior that is familiar in more standard input forms),
* whether the fact that Firefox is less accommodating in that regard is a reportable bug, or whether Firefox should not have to worry about sites (like usps.com) that can't be bothered to comply with standards.
What do you think about those questions?

I'm big fan of Google Toolbar but is does not work with the latest version of Firefox??

I made an update yesterday and all of a sudden the Google Toolbar did not match with the latest version of Firefox...??
Will that be solve or is my time with Firefox over???

whatever you are trying for me to see, it blips up on my screen for a half a second and then it goes immediately to the reply page, can you type out or cut and past the entire link or tell me the title of what the post or article is? This is even worse, Firefox doesn't work within Firefox!! now that is sad

My Apple ID Password does not work with the iOS Dev Center

Similar Messages

Maybe you are looking for