My Apple ID will not work in iMessage & Facetime.  It works everywhere else.  Any ideas.  Thank you

My Apple ID will not work in iMessage & Facetime.  It works everywhere else.  Any ideas.  Thank you

Facetime and iMessage seem to be issues on Apple's end, so not much you can do but wait for them to fix it.

Similar Messages

  • Good Morning, Are there any other donotfollow plug-ins or add ons for the version 4 of Firefox? The one available on your site will not work with version 4. Thank you.

    I am starting to affiliate market and need a donotfollow plug in or add on and the one available on your site will not work with version 4 of Firefox. Is there another place I can go or do you have another add on that will perform the same function as the do not follow you have on your site for the previous versions of Firefox? Any help would be greatly appreciated.

    OK - to answer my own question, Apple recommend 8.2.1, but you can install 9.1.1 and it will run on a G3. Very slowly. Looks like this is the only option. Get it here: http://support.apple.com/kb/DL1036. You need OSX 10.4.11 or later though....

  • I have a 2nd generation iPod touch and it shows to be connected to WiFi but will not access the internet, please tell me what i can do, because i use this device for work and it make things difficult that it will not work now. Please help, thank you!

    I really need help, my ipod shows to connect to the WiFi but then it will not let me use the interent it says no connection but according to my screen i have WiFi connection, i am very confused an i would really appriciate it if someone could help me sort out this problem so i can start using my iPod for work again.

    Even though the iPod shows as been connected, it might not have actually received a valid IP address via DHCP from your Wi-Fi access point or router.  Head to Settings -> Wi-Fi and tap the > next to the network you are connected. If 169.xxx.xxx.xxx is listed for an IP Address, then your iPod did not receive a valid IP address.  To correct this you can reboot your router by unplugging it from power for about 30 seconds.
    It wouldn't hurt to also reset your iPod.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    See here for more troubleshooting assistance.
    iOS: Troubleshooting Wi-Fi networks and connections
    B-rock

  • Hello,  I have  upgraded my laptop to lion,  from Snow Leopard,  but now my Music Pad Pro,  program will not work ,   can anyone help?  Thank you.

    Hello,  I upgraded my laptop from Snow Leopard to lion,  unfortunately I have a  2 music programs that no longer work.  one is called the Music PadPro,   which is now gone bankrupt,  can anyone help?.   I was talking to the Apple Store earlier and they said if I upgrade to the mountain lion it may help but I'm not so sure,
    kind regards
    Nigel

    There's no reason that upgrading from Lion to Mountain Lion would make this application work.  I've looked up Music PadPro.  I don't know much about it, but it looks pretty old.  Here are the requirements:
    Macintosh G4 or higher processor running Mac OS X Version 10.2.6 (minimum),
    Mac OS X Version 10.3.2 (recommended), or Mac OS X Version 10.4.2.
    Looking at that, I would guess that the application would require a PowerPC processor.  After the release of the Intel machines back in 2006, Apple included something called Rosetta within OS X.  This allowed programs developed for the older architecture (PowerPC) to run on the newer Intel machines.  The reason for this was to give developers some time to upgrade their applications to run natively on Intel processors.  It was only with the introduction of Lion that Apple pulled Rosetta from their OS.  They had basically given developers about five years to upgrade their applications.  Unfortunately, in your case, the developer went belly up.  You can always install an older version of the OS on either a separate partition or an external drive and you can run your program from there.

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • My apple id will not work for my icloud account

    my apple id will not work for my icloud account I am running windows 7 I have reinstalled ICloud for PC several times but do not know where to set up an icloud account

    If you are getting a message that says you have a valid Apple ID but not an iCloud ID, it's because you are trying to create an iCloud account on a PC.  You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher.  After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.

  • My wired apple keyboard will not work since unplugging it and plugging it back in.

    my apple keyboard will not work since I unplugged it to clean and plugged it back in.

    1. Reset PRAM.  http://support.apple.com/kb/ph14222
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I need to make a pdf document, made in photoshop, 'page turn' and then add it to my website. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

    I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

    Hello waitingone,
    please try this (all terms are translated from my German programs to my best knowledge):
    1. Did the creator of the pdf file enable the import options?
    2. See import options: choose an other visibility option for your layer.
    3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
    4. See trimming: try the different modes there. Often works: "Media".
    5. Is the pdf file (eg from Word) correctly created?
    6. Is the PDF file protected? >>> no import possible.
    7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
    Good luck!
    Hans-Günter

  • After Mountain Lion download, FaceTime is not working anymore. Any ideas?

    After Mountain Lion download, FaceTime is not working anymore. Any ideas?

    I have reinstalled mountain Lion again . This time, Facetime works when somebody calls me, and I can do calls from my Mac again. But the problem was still that I was not able to call my iPad, what I was able to do with Lion (I had one Apple-ID and two call adresses). The solution was this time to generate a second Apple-ID from the Facetime in my Mac (this doesn't affect your main Apple-ID, it's only used for Facetime). Now, it works!  ;-)

  • Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?

    Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?

    Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?

  • HT201441 I have a used ipad mini.  I did a reset on it and I am trying to set it back up, but it is still tied to last users iTunes ID and will not let me set it up with mine.  Any ideas.  I tried setting it back to factory defaults with usb cable, but st

    I have a used ipad mini.  I did a reset on it and I am trying to set it back up, but it is still tied to last users iTunes ID and will not let me set it up with mine.  Any ideas.  I tried setting it back to factory defaults with usb cable, but still no go.  How do I activate ipad mini with my iTunes ID.

    delete the email account and try again

  • HT5706 After the update the Apple TV will not work -  It puts up a symbol to connect to the Icloud - which I do not have the cable for or know what it means or why -  Message do not update if it works

    After the update to the Apple TV, it will not work -  It puts up a symbol to connect to the Icloud - which I do not have the cable for or know what it means or why - 
    Message to users is, do not update if it works.  This product apparently was not tested very well

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.
    If when you choose restore you get a message that the device cannot be found, download the file below
    Apple TV Software Restore 5.1.1 (2nd generation)
    Apple TV Software Restore 5.1.1 (3rd generation)
    Then hold down the option key while choosing restore and select the downloaded file when prompted.

  • Apple Mail will not work without webmail login

    Spontaneously 2 weeks ago I got a triangle next to my Apple Mail Inbox and could neither send nor receive email. I have used ATT for DSL and my email address for over two years without this problem. I have checked all my settings with ATT and they claim they have even "rebuilt" my mailbox and all is good. But unless I use a browser to log into webmail first, Mail will not work. The user name/password/port info is all correct, but Mail cannot connect. Even when the "keep me logged in" box is checked when I log in to webmail, Mail will stop working if I close out the browser and put the computer to sleep. This is driving me crazy.

    I've had what sounds very similar issue with another DSL ISP: Qwest.
    Ran both Comcast & Qwest simultaneously (alternately, not really concurrently)
    for awhile & got sporadic blips & failures to connect.
    I never could establish conclusively whether it was the ISP, or a local client problem.
    I think its the ISP. Had other email annoyances with them that never quite got resolved
    Sometimes my mail was left on the webmail server & never got delivered & would do so, same as you describe.
    Its never anyone's fault, or problem...
    I doubt they'd tell you if it was an issue on their end, if it not resolved.

  • My apple id will not work with ichat., my apple id will not work with ichat.

    My ichat will not work with my apple id. How can I make it work without changing my apple ID?

    the error message reads:
    your account has been disabled
    This Apple ID account has been disabled for security reasons. Tap Reset to reset your account
    I have reset my account  ID but it still does nit work on my IPAD.
    Does work on my IMAC and IPHONE

Maybe you are looking for