My apple iP ad and charger plug keep getting very hot. I have tried resetting it but this doesn't help. Please can anyone help?

please can you help? My apple I pad min version 7.1 (11D167) model MD531B/a. Capasity 13.4 GB keeps getting very hot and the charger plug. It seem to run down quickly too. It's been going on for a long time now. I have tried resetting it but this does nothing. Kind regards Rosemary.

Hi Rosemary,
These devices will get very warm (even uncomfortably so) when charging. From my own experience this is exacerbated if the device is in use at the time of charging or if the device is in a case that does not allow air to reach the device.
You will see a warning on the iPad's display in the form of a yellow triangle and exclamation mark long before the device reaches a dangerous temperature.
As long as the device is no warmer than a nice cup of coffee, you're in the clear.
As you have mentioned that your battery is draining quickly, this could indicate that the processes running at the time are rather intensive on the iPad's resources and this would naturally raise the temperature of the iPad.
If you have a look in Settings>General>Usage and look for the Standby and Usage times toward the bottom, are the two numbers significantly different? If you see that the Usage and Standby times are identical then you are experiencing a software issue where the device is not entering sleep as it should when not in use.
Cheers

Similar Messages

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

Is this what you downloaded: iTunes 10.7?
When the update fails what if any error report do you get, specifically? Please do this before trying again:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

I am trying to edit a project originally started on another computer, by someone else and saved onto an external h-drive, but keep getting 'general error 48' when I try to render it to work further. Can anyone help?

I am trying to edit a project originally started on another computer, by someone else and saved onto an external h-drive, but keep getting 'general error 48' when I try to render it to work further. Can anyone help?

Is this problem only occurring with the project you copied from an external drive, or with any FCP project?
For example, if you were to create a new project, do you still have this problem?
In FCP, if you go to the menu FInal Cut Pro > System Settings and look at the Scratch Disks Tab, is it set where you expect it to be? Have you tried switching the scratch disk to a different disk?
MtD

I have a large document which keeps repaginating and adding blank pages. I can no longer use the print preview at all. I have tried all the usual fixes. Nothing works. Can anyone help?

I have a large document which keeps repaginating and adding blank pages. I can no longer use the print preview at all. I have tried all the usual fixes. Nothing works. Can anyone help?

Is your printer selected? <br />
Is '''Print to File''' selected, where the web page is being printed to a file and not being sent to your printer?
See the screenshot below.

My iPod touch isn't working correctly.it is displaying a white light and no matter what i try it isn't helping.tries holding the reset and power button together and tryed holding the power button in but it doesn't work. please can someone help?

my iPod touch isn't working correctly.it is displaying a white light and no matter what i try it isn't helping.tries holding the reset and power button together and tryed holding the power button in but it doesn't work. please can someone help?

Try the remaining items in the white-screen topic of.
iPod touch: Hardware troubleshooting
If not successful. let the battery fully drain and then charfe for an hour and try again.
Frequently a white scree nis due to a hardware problem.

My iPhone will no longer show up in my iTunes. I have tried to look at resolutions but for all of them the "Device" bar must be there and i cannot even get that to pop up. I just want to sync my phone. Can anyone help? :(

Please help. I dont know what to fo i keep getting a USB Device Not Recoganized pop up. This has never happened before and I have no clue what to do. I also cannot manually sync my phone through settings because it says that my computer is not available.

I'd try removing and then re-installing iTunes. An uninstall will not remove your music etc. That should re-install the usb drivers etc. I don't think you can separately delete and install the drivers.

TS3274 I downloaded netflix and it's not showing up and if I go into App Store it says it's downloaded but it won't open. Can anyone help me?

I downloaded Netflix from the App Store and it won't show up on my iPad and when I go into the store it says downloaded and open but it won't open. I tried deleting it and reinstalling it but I can't figure out how to uninstall it either. Please help

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- Try when connected to another network
- Update via iTunes on a computer.

HT5934 I keep getting an error message when trying to instal is7 in my iPad 2 . Can anyone pls help . I lost wifi for a white during the installation ...

Hello
Can anyone assist me with installing ios7 on my ipad2 please ?

laleh08 wrote:
Hello
Error message is "unable to install update " "an error occurred during installing IOS7 "'
Can you assst ?
Ooof... I hate those super-generic messages. If I were in your shoes, I'd start all over again with a new download. My WAG is that your first download was corrupted.

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I drained my ipad's battery and trying to charge it. but it won't turn on. i tried it overnight but still the ipad is dead. can somebody help me?

i drained my ipad's battery and trying to charge it. but it won't turn on. i tried it overnight but still the ipad is dead. can somebody help me?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Every time I start my PC it says Procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll It also keeps freezing on Itunes and I cannot sync. Please can anyone help?

Every time I start my PC it says Procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll It also keeps freezing on Itunes and I cannot sync. Please can anyone help?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

My ipod touch 4g isnt letting me download apps now whenever i try to it says cannot connect to itunes, i cant find anything that works, i logged out of my apple account and tried to log back in but it wont let me! Can anyone help me

My ipod touch 4g isnt letting me download apps now whenever i try to it says cannot connect to itunes, i cant find anything that works, i logged out of my apple account and tried to log back in but it wont let me! Can anyone help me

Likely Apple problem
iTunes Store - 20% of users are affected
Users are unable to make purchases.
http://www.apple.com/support/systemstatus/

I create an apple id then i want to verify it, i verify it once then when i log in with my apple id it asked mi again to verify it.everytime i log in it asked me to resend verication and after i resend it i press done. Please can anyone help me ?

I create an apple id then i want to verify it, i verify it once then when i log in with my apple id it asked mi again to verify it.everytime i log in it asked me to resend verication and after i resend it i press done. Please can anyone help me ?

How are you verifying it? Are you responding to the email that is sent? If not, do so.
If so, then try changing your password.

I am unable to open any app on my iphone. While i'm trying to open an app, it just shakes the screen and it does not get open and remains in the same page. It worked fine until I charged the phone in my laptop. Please can anyone help me to recover it?

I am not able to open any app on my iphone. While i'm trying to open an app it just shake the screen and it does not open and remains in the same screen. It worked fine until I charged the phone this evening. After that suddenly I'm facing this. Please can anyone help me to recover this issue? pls!

This is covered in the basics section.
A restore loses nothing.
A restore does. If you are using the iphone as designed, then everything should be on your computer.

My apple iP ad and charger plug keep getting very hot. I have tried resetting it but this doesn't help. Please can anyone help?

Similar Messages

Maybe you are looking for