MY APPLE IPOD 16GM TOCH SCREEN WILL NOT TURN ON

hELLO MY NAMEIS ROSIE.. I HAVE AIPOD TOUCH SCREEN AND IT WILL NOT TURN ON

Try:                                               
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable       
- Try on another computer                            
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     

Similar Messages

  • My ipod has a black screen will not turn on or reset

    my ipod has a black screen will not turn on.  Will not reset per ipod instructions.  no battery picture when plugged in

    Try restoring...
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    If you have problems restoring...
    iPhone and iPod touch: Unable to update or restore

  • My ipod nano 4th generation will not turn on or charge.  It is just sitting (frozen) at a black screeen.

    My ipod nano 4th generation will not turn on or charge.  It is just sitting (frozen) at a black (blank) screen.  What do I do?

    Hello, HJA-heartgirl. 
    There are a couple things you can try to troubleshoot this issue.  Below, I have included a couple articles that will help you troubleshoot your iPod.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    iPod nano (4th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano4gen/
    Regards,
    Jason H. 

  • HT1459 MY IPOD NANO 6TH GENERATION WILL NOT TURN ON I GOT IT FOR CHRISTMAS AND PLAYED THE RADIO ON IT WITH OUT PLUGING IT INOT ITUNES AND I WAS WONERING HOW TO FIX IT ?

    hi my ipod nano 6th generation will not turn on what should i do ...no batery left and never pluged it into itunes

    Hi meganisawsome,
    If your iPod will not turn on and you are getting indicators that there is no battery left, the first step would be to make sure that the iPod has been charged correctly. You may find the following article useful:
    Apple Support: Charging your iPod battery
    http://support.apple.com/kb/HT1384
    If you are still having issues after charging, you may want to look at this article:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Regards,
    - Brenden

  • My ipod touch 4th gen will not turn on, i have held the power and home buttons, i have plugged my ipod into itunes and tried again, yet nothing happens, what should i do?

    My ipod touch 4th gen will not turn on, i have held the power and home buttons, i have plugged my ipod into itunes and tried again, yet nothing happens, what should i do?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My ipod nano 6th generation will not turn on.

    My iPod nano (6th generation) will not turn on. I have charged it (attached to my computer) for 30 minutes. I have tried to reset it (held down Wake and Volume Down for 8 seconds)- no response. I have factory restored it (through iTunes)- no response. It shows up as connected to my computer and will sync in iTunes, but the display on the iPod will not turn on. Any ideas?

    Hey s.mccarter2010,
    Thanks for the question. After reviewing your post, it sounds like you have tried a lot of things and the iPod still will not turn on. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iPod won't turn on
    If you have tried the solutions above and iPod still won't turn on, check the following:
    Make sure iPod is the only device in your FireWire or USB chain. Disconnect everything but the mouse, keyboard, and your iPod, then see if it will turn on.
    Make sure you are using the FireWire or USB cable that came with your iPod, and that the cable is in good condition.
    Try connecting iPod to the built-in port of a different computer to see if that works. Note: If using a portable computer, make sure it is plugged in to a power source and that the lid or display is open. If the lid is closed the computer may go into either standby, sleep, or hibernation mode and iPod will not charge properly.
    If you still can't turn iPod on after performing these steps, it may need to be repaired. You can arrange for repair at the iPod Service Website.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • IPod Touch 4th Gen. will not turn on!

    My iPod touch 4th Generation will not turn on. I've only had it since September and have barely used it. I plug it into my computer and it doesn't charge, it doesn't turn on even with a low battery symbol... my computer doesn't even recognize it as being plugged in. When I plug a 3rd generation in, it charges and is recognized by my computer, so I am almost 100% sure it's not a problem with my computer.
    I've tried holding down both the home key and the power key at the same time and nothing happens...
    Help please!

    Welcome to the discussions,
    does it charge using the adapter? If yes, charge it for at least 10min, then connect in recovery mode, shown here: http://support.apple.com/kb/HT1808

  • My iPhone 4 has just shut down.  Rang the phone then vibrated for 2 minutes bank screen, will not turn on, also tried charging and will not charge.  Any suggestions

    my iPhone 4 has just shut down.  Rang the phone then vibrated for 2 minutes bank screen, will not turn on, also tried charging and will not charge.  Any suggestions?  I did download a ringtone app and went on to iTunes to sync!. 

    Try charging the iPhone via a wall socket for at least 30 minutes then try a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.

  • Help!!!!!! my iPod touch nd gen will not turn on at all even after charging it for 2 days straight what's wrong???

    Help!!!!!! my iPod touch nd gen will not turn on at all even after charging it for 2 days straight what's wrong???

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I dropped my phone in a toilet, the sound and vibrate are working but the screen will not turn on, what should I do?

    I dropped my phone in a toilet, the sound and vibrate are working but the screen will not turn on, what should I do? do I just need a new screen or what? I'm freaking out here

    Don't freak out, just get over it. It's probably done.
    What should I do if I drop my phone in the toilet?
    Apple may offer you an refurbished iPhone in exchange for yours, for about half the cost of a new one.
    I wouldn't be too specific about just how it got wet

  • Ever since I downloaded the new iOS 7 my screen will not turn up and down and it rotates on its own side to side.it will not face the way I want it to go. How do I fix it?

    Ever since I downloaded the new iOS 7 my screen will not turn up and down and it rotates on its own side to side.it will not face the way I want it to go. How do I fix it?

    I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!

  • IPhone 4 is stuck in the telephone screen, will not turn off by holding down top button or main menu

    iPhone 4 is stuck in the telephone screen, will not turn off by holding down top button or main menu, can't send texts, emails, check internet etc.,

    Hold down the home and power buttons until the Apple logo appears(about 15 seconds). It should then restart.

  • My ipod touch 5th generation will not turn on and the home button doesn't work. what do i do?

    Hello my name is Leslie and i would like to ask you guys a question on how to fix my ipod or what is wrong with it. My ipod touch 5th generation will not turn on and the home button doesn't work. what can i do to fix it ?

    Has the home button worked in the past, or is this been something that hasn't worked for some time? The only way to reset the device is with the sleep/wake (power) and home buttons together. Without it, you would have to wait until the battery dies and then plug it in to try and reset it. The Home button is used for several user troubleshooting steps. Without it, you cannot perform a reset, put the device into recovery mode, or place it in DFU mode. You need to get the home button repaired.

  • IPod Nano 7th Generation will not turn on

    My 10 month old iPod Nano 7th Generation will not turn on - all of a sudden.
    All songs on the device have disappeared.
    Shows in iTunes - even shows as having a fully charged battery.
    Holding Home Button and Sleep/Wake button down, even for a long time, doesn't help.
    Have changed USB ports, from computer to AC powered USB charging station.
    Help?

    Just saw elsewhere on the forum to press and hold the power and home buttons and it fixxed it for me

  • N8 screen will not turn on ...New phone just bough...

    N8 screen will not turn on ...New phone just bought today and screen will not come on

    Charge the device (check that the white LED next to the USB port lights up) for at least 20 minutes, keep pressing the on/off button (needs some force) till you feel a vibration.

Maybe you are looking for

  • At line Selection event, failed

    I have created my own pf-status, and assigned 'PICK' to the F2 key in the pf-status. When i am double clicking on a field in the report output, it is coming to the event 'AT LINE-SELECTION'. in that event i am writing the statement. read line sy-lill

  • How to add links to portlet header ?

    I want to add a print link to the portlet header, along with Customize, Help, About etc Is there any way to do this ? (Using PDK, java or pl/sql)

  • Editor freezes after selecting tool.

    I am using PSE 12 on a Macbook Air.  I have a RAW file.  I select "Open Image" so that I can use the non-RAW tools.  When I open the Editor, I can use the mouse freely to select a tool.  I select Dodge.  The mouse cursor changes from the arrow tip to

  • Error installing Solution manager 7.0 EHP1

    Hi All, I am installing Solution manager 7.0 EHP1 on Windows server 2008 64 bit. I have downloaded the installation DVD's from service market place (Named: 51036441_part1, 51036441_part2 and 51036441_part3). But i am getting error while giving the pa

  • Debugger Message SY495 in BSP code

    Hi, I ran into message SY495 while trying to debug a BSP. The solution we found I have posted in the ABAP forum. I put the message number in the title.