My Apple itouch is disabled for 22545864 minutes how do I fix it

My son says it is a glitch
I don't Know enough about the Item to know for sure

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Similar Messages

  • IPod Touch disabled for 4342386 minutes!

    So last night I let my iPod Touch chrage overnight, when I woke up and turned it on, it said it was disabled for 4342386 minutes. When I try to sync it with my computer, it wont let because its says I need to enter the passcode first on the iPod...Is there anything I can do to dump it and restore it? I have tried restarting it 10 times but same result so any help is appreciated.
    Thanks,
    Gus

    Hey finnpoika19,
    Try connecting the iPod to the computer you normally sync with. After disconnecting from the computer you normally sync with, you should be able to try again.
    This article provides more information and describes how to restore the iPod touch, when its in this state. http://support.apple.com/kb/HT1212
    Jason

  • HT4061 My Child has disabled my ipad mini...It ran out of charge and now is disabled for 22928370 minutes, what can I do as I cant get onto the ipad to get the serial number to speak to an advisor and its only 10 months old. HELP!

    Please help me....
    My Child has disabled my ipad mini...It ran out of charge and now is disabled for 22928370 minutes, what can I do as I cant get onto the ipad to get the serial number to speak to an advisor and its only 10 months old. HELP!

    Hello Jesslocko,
    Before following the iPad Restore process make sure you have updated version of iTunes installed on your computer, to check that Open iTunes on your computer click on Help and then check for updates ( If there is any updates available then Install it ) and If you do not have iTunes Installed or if you want to directly update the version of your iTunes then Download and Install iTunes from here : http://www.apple.com/itunes/download/
    1. Make sure your device (iPad) is unplugged (Disconnected) from your computer (this should be the computer that you use to sync your iPad or you can use any other computer with iTunes installed in it). You can leave the USB cable connected to your iPad though.
    2. Turn off your iPad. Press and hold the power button on the top edge until a slider appears. Slide it from left to right to power off your device. If the slider doesn't appear (because your iOS device has frozen up) then hold the power and Home buttons down until the iPhone or iPad turns off.
    3. Ensure your device has a decent amount of charge. Leave it plugged in to the mains for 10 minutes or so if you see the flat battery icon. (iPad low battery)
    4. Hold down the Home button (the round button at the bottom of your iPad screen) and connect the other end of USB cable to the computer this should cause your iPhone or iPad to turn on. Keep holding the Home button until you see the iTunes and USB cable images on your iPad screen, then release the button.(iPad recovery mode)
    5. In iTunes (launch the application if it isn't running on your Computer), you should see a message saying an iPad has been found in recovery mode.
    6. Click OK and then click on Restore to bring your iPad to Factory settings

  • Have the oldest ipod touch. . daughter forgot password to enable it. It's now been disabled for 22K  minutes. I'm trying to reset as a new device, but iTunes is telling me it can't do anything w/it b/c it's "disabled". Does anyone know a way around this?

    Have the oldest ipod touch. . daughter forgot password to enable it. It's now been disabled for 22K  minutes. I'm trying to reset as a new device, but iTunes is telling me it can't do anything w/it b/c it's "disabled". Does anyone know a way around this?

    Read this
    iOS: Unable to update or restore

  • Slim "Id "x" respawning too fast: disabled for 5 minutes"

    Hello Everyone,
    Slim "Id "x" respawning too fast: disabled for 5 minutes"
    This error drives my crazy I changed to slim after the recent change of gdm.
    Since I changed, when I boot my PC this error always occurs. Only solution so far is either to wait for 5 minutes  or to change to another TTY#, login and try init 3 and then init 5 (which only works sometimes but most of the time delivers the same error).
    The error doesn't occur when I REboot the PC.
    I start slim via inittab with "x:5:respawn:/usr/bin/slim >& /dev/null"
    I already tried the German Arch-Forum but got no reply.
    There is a topic http://bbs.archlinux.org/viewtopic.php?id=81159 with the "solution" to change inittab
    "x:5:respawn:/usr/bin/slim >& /dev/null"
    to
    "x:5:once:/usr/bin/slim >& /dev/null"
    but this doesn't work for me, slim then refuses completly to start.
    I'd prefer to use the inittab method and not the daemon method...
    Thank you in advance
    cl10k
    PS: Sry for bad English...
    Last edited by cl10k (2009-11-24 21:54:18)

    Hi,
    "generally" X seems to work fine. I use Openbox without any problems. If I try /usr/bin/slim from init 3 it says: "Stale lockfile found, removing it" and then nothing happens - the console just stays on.
    I haven't changed my Xorg for ages, I still use the same X configuration (besides updates) that I had years ago with kdm and then with gdm. Even when I switched from gdm to slim I just follwed to wiki and changed the Inittab line from gdm to slim.
    Heres my Inittab and my Xorg.conf (to be honest I'm not really fit with Xorg configuration...)
    To be sure, I just created a (very basic) new Xorg.conf with nvidia-xconfig.
    # /etc/inittab
    # Runlevels:
    # 0 Halt
    # 1(S) Single-user
    # 2 Not used
    # 3 Multi-user
    # 4 Not used
    # 5 X11
    # 6 Reboot
    ## Only one of the following two lines can be uncommented!
    # Boot to console
    #id:3:initdefault:
    # Boot to X11
    id:5:initdefault:
    rc::sysinit:/etc/rc.sysinit
    rs:S1:wait:/etc/rc.single
    rm:2345:wait:/etc/rc.multi
    rh:06:wait:/etc/rc.shutdown
    su:S:wait:/sbin/sulogin -p
    # -8 options fixes umlauts problem on login
    c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
    c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
    c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
    c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
    c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
    c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
    ca::ctrlaltdel:/sbin/shutdown -t3 -r now
    # Example lines for starting a login manager
    #x:5:respawn:/usr/bin/xdm -nodaemon
    #x:5:respawn:/usr/sbin/gdm -nodaemon
    #x:5:respawn:/usr/bin/kdm -nodaemon
    x:5:respawn:/usr/bin/slim >& /dev/null
    # End of file
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 1.0 (buildmeister@builder63) Tue Oct 20 21:01:12 PDT 2009
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "0"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "LG F900B"
    HorizSync 30.0 - 98.0
    VertRefresh 50.0 - 160.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7600 GS"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "1"
    Option "TwinViewXineramaInfoOrder" "CRT-0"
    Option "metamodes" "CRT-0: 1280x1024_85 +1280+0, CRT-1: 1280x1024_85 +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    EDIT: It seems to work now! Slim started without any errors. I will test that for some days to see if the problem is really gone now.
    Just out of curiosity:
    A lot seems to have changed in Xorg.conf since my old ~2years old config was made.
    I had to turnoff boot logo manually and set Option "Composite" "Enable" but now everything seems to work by default?
    Do you see any flaws in my xorg.conf? Any ideas for improvements (except metamodes)?
    Last edited by cl10k (2009-11-25 10:47:02)

  • "INIT: id "x" respawning to fast: disabled for 5 minute"

    Hello Archers!
    This is my situation… I am running ArchBang! On my Acer Aspire Timeline with all Intel, 320HD, 3GB Ram DDR2 and Intel Mobile 4 Series Express Chipset Family GMA 4500MHD (GM45) 64bit. I  understand that this may not be the appropriate place to post my thread but this Forum is my last Resource!
    I removed Vesa driver (# pacman –R xf86-video-vesa) and install the Intel driver available in the repositories (# pacman –S xf86-video-intel) then I edit my /boot/grub/grub.cfg and deleted: xorg=vesa nomodeset.
    Rebooted and I see the changes right away fonts are looking wonderful but after all deamons finish running I go into this command login screen! Rather than my login manager to then go into my OpenBox window manager. And so I get this weird message "INIT: id  "x" respawning to fast: disabled for 5 minute"
    I tried uncommenting in my slim.conf:
    #/etc/slim.conf
    Daemon yes
    Per suggested in the ArchBang! forums
    I also tried the KMS per the Archwiki Intel… https://wiki.archlinux.org/index.php/Intel
    One thing I did not try was installing lib32-intel-dri because my system is 64 bit. But I don't think this step is necessary. Is it?
    I have tried other things but have not been successful. Please Help! Any suggestions/guidance and/or tips are highly appreciated.
    Happy Holidays,
    Luis Caballero

    Please don't post multiple threads. Closed your other ones. Consider this your first warning.
    For reference, please go to https://wiki.archlinux.org/index.php/Fo … ss-Posting
    Actually, please read that whole document.

  • INIT: Id "c0" respawning too fast: disabled for 5 minutes

    try to do a new arch "2007.08 dont't panic" installation on my toshiba notebook.
    but get always the errror: INIT: Id "c0" respawning too fast: disabled for 5 minutes
    thanks
    the output of /etc/initiab looks about like this, have a foto of the /etc/inittab output, if anyone need it.
    #/etc/inittab
    # Runlevels:
    id:2: initdefault
    rc::sysinit:/etc/rc.sysinit
    rh:06:wait:/etc/rc.shutdown
    c0:2:respawn:/sbin/agetty -n -l /etc/login.sh 9600 ttyS0 linux
    c1:2:respawn:/sbin/agetty -n -l /etc/login.sh 38400 vc/1 linux
    c2:2:respawn:/sbin/agetty -n -l /etc/login.sh 38400 vc/2 linux
    c3:2:respawn:/sbin/agetty -n -l /etc/login.sh 38400 vc/3 linux
    c4:2:respawn:/sbin/agetty -n -l /etc/login.sh 38400 vc/4 linux
    ca::ctraltdel:/sbin/shutdown........
    #End of file

    started the linuxday archlinux version and checked the /etc/inittab
    thiline is not there: c0:2:respawn:/sbin/agetty -n -l /etc/login.sh 9600 ttyS0 linux
    I removed it, and then installation works like a flaw.

  • TS2446 im trying to change my password for my apple id but its says that my account has been disabled for security reasons, how can i solve this problem?

    im trying to change my password for my apple id but its says that my account has been disabled for security reasons, how can i solve this problem?

    Depending on why it's been disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
    If it then works on your computer's iTunes but not your phone/iPad then try logging out of your account on the phone/iPad by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it

  • Apple Id is Disabled for Security reasons 2 Step verfication enabeld

    I have enabled 2 Step verification on my apple id Now my apple id is disabled for security reasons when i am trying to unlock its asking for recovery key after recovery key its asking for code on my trusted device but have sign out icloud on my trusted device so i am not receiving any code on my trusted device As apple say's on 2 step verification help topics that 2 step verification required 2 things So i have 2 things my recovery key and password but i am not able to unblock my apple id Am not able to login in my trusted device to receive code not able to login in Manage apple id page so please help me i am very frustrated
    Thanks a lot
    have a great day   

    Contact Apple... no one in these user to user support forums can help you.

  • My apple id is disabled for a security reson

    my apple id is disabled for a security reson& i want to enable it so i can activate my i phone 5s
    please rply me as soon as you can

    panyf,
    It is not wise to post personal identifyable information in a public forum, I asked the hosts to edit out your email and Apple IDs.
    Try contacting the store support staff as they have access to account information and can correct whatever is wrong with your account:
    http://www.apple.com/emea/support/itunes/contact.html

  • My ipod message is "ipod is disabled try again in 21,565,420 minutes" How do I fix this?

    My tween's ipod message is "ipod is disabled try again in 21,565,420 minutes"  How do I fix this?
    I"m far, far, far from a techy!  Thanks!

    Connect the iPod to its syncing computer and restore via iTunes. If iTunes asks for the passcode and you can't enter the passcode or you dod not have the syncing computer, place the iPod in recovery mode and then restore the iPod. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    This is covered in the manual and you can get that here:
    Apple - Support - Manuals

  • When i download any thing on iPhone using apple id it says your apple id is disabled may i know how to enable it?

    When i download any thing on iPhone using apple id it says your apple id is disabled may i know how to enable it?

    If disabled for Security Reasons
    See here  http://support.apple.com/kb/TS2446
    If not for Security reasons.
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • My ipod 5th generation locked me out for 23,504,646 minutes how do i fix this

    my ipod 5th generation locked me out for 23,504,646 minutes. how do i fix this without deleting all my data or using icloud or itunes?

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
    Disabled Recovery-must use syncing computer.

  • My Iphone 5 keeps restarting over and over. it wont stay on for more than a minute. how do I fix this?

    My Iphone 5 keeps restarting over and over. it wont stay on for more than a minute. how do I fix this?

    Contact Apple Support or an Apple Store if you have one near you. Your battery needs to run through the diagnostic test. You can also try to put the device into Recovery mode as well and rsetore the iOS software, and set up the device as new. Follow this article on Recovery Mode:
    http://support.apple.com/kb/ht1808

  • HT201359 I had cancelled a auto withdrawal from a app I purchased months ago. The app is smule sing. I cancelled  the VIP on December 26,2013. Auto renewal was on 12/27/2013. On 1/7/2014 apple charged my account for this. How do I get my money back

    I had cancelled a auto withdrawal from a app I purchased months ago. The app is smule sing. I cancelled  the VIP on December 26,2013. Auto renewal was on 12/27/2013. On 1/7/2014 apple charged my account for this. How do I get my money back

    Use the Report a Problem link in the emailed receipt.

Maybe you are looking for