My apple mac pro will e in the  car while we are skiing. It is 2 degrees out. I thinkit will be come frozen. does that create damage or can it defrost?

my apple mac pro will e in the  car while we are skiing. It is 2 degrees out. I thinkit will be come frozen. does that create damage or can it defrost?

Look at the Power and Operating Requirements shown in http://www.apple.com/macbook-pro/specs-retina/ and note the temperature limitations.  If you leave it in the car for a period of time, make sure you do not try to use it until it has warmed to room temperature.
The low temperature can affect the battery so you may need to charge after it has warmed, do not do so while it is still cold.

Similar Messages

  • Hello, I have an apple Mac Pro. It is an older machine but I just had the Apple Store install a new drive with OSX 10.6.8. It runs great but I need to load software. Will it run CS4 Design Standard? Or, will I need CS5.

    Hello, I have an Apple Mac Pro Laptop. It is an older machine but I just had the Apple Store install a new hard drive with OSX 10.6.8. It runs great but I need to load software. Will it run CS4 Design Standard? Or, will I need CS5. This machine can't run 10.7.

    Hi There,
    As per CS5.5 Design Standard release notes it can run on 10.6.8.
    Kindly try to install in and share the results so that we can assist you if needed.
    Please find the download link in my previous post.
    Thanks,
    Atul Saini

  • We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

    we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
    Appreciate your support and if possible , how to do this?

    If you want to work with Mac OS X, you need one computer per simultaneous user.
    What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
    Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

  • I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

    I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

    Before you sell or give away your computer, in addition to the steps mentioned in this support article, take these steps:
    Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
    Reset the PRAM and the SMC, which might contain personal information.
    If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
    If you activated FileVault in OS X 10.7 or later, turn it off.
    If you use Boot Camp, the partition must be deleted
    If you created any other data partitions on the internal drive, remove them in Disk Utility.
    Erase the data partition(s) with the option to zero out data. An SSD doesn't need to be zeroed.
    You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall  an older OS, either from the installation media, if applicable, or by booting into Internet Recovery (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
    If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer with the machine.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
    The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either.
    Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

  • I'm shopping for the Apple Mac Pro

    I'm shopping for the Apple Mac Pro Desktop 2.66GHz Intel Core 2 Quad, 3GB RAM
    Mfr. Part # MB871LL/A
    When I put that in the Apple website, (just MB871LL/A ) or Google on the Web, it shows results)
    which on the Web is :
    2300$ at PC connection, J&R and Amazon
    While looking for a better price I found one
    for much much cheaper (+/- $500 less)
    Desktop Computers » APMP266QC3 » Apple Mac Pro Desktop Computer Workstation (Early 2009)
    (I don't know why they call it a workstation ?)
    They say all our products are new, not refurbished
    It's the same as the one seen on J&R, Amazon, etc. but what bothers me is that the Mfr# is different. [APMP266QC3] when everywhere else, including Apple store, it is MB871LL/A
    I'm wondering if there's something fishy here ?

    First a clarification: After reading the May 2009 issue of MacWorld (pg 50) I decided to buy the Apple Mac Pro Desktop 2.66GHz Intel Core 2 Quad, 3GB
    I find out that this model is known as Mfr. Part # MB871LL/A
    So if I see a Mfr#Z0G8-0002 (see below) I'm wondering what it is.
    The store that I'm talking is not B&H, it's on the other side of the country. They sell a 3GB and a 6 GB.
    they sell a 3GB computer with # [APMP266QC3] which seems now to be a B&H stock # (No information on Mfr#)
    They have also a 6GB and it has the APMP266QC6GB and
    Mfr#Z0G8-0002 also with $500 less than anywhere else.
    Both these number can be seen in B&H
    And that's my question: Mfr#Z0G8-0002 ? (not sure what is 0002)
    A completely different number just because 6GB instead of 3GB and everything else is the same ? That would be stupid. Usually it would just have one digit different at the end.
    When I put that number in the Apple page it said no result found. (but that could be because they stop selling it ?) If you google it will show results.
    I google both ZOG8-3GB and Z0G8-6GB
    http://www.google.com/search?client=safari&rls=en&q=Z0G8-6GB)&ie=UTF-8&oe=UTF-8
    http://www.google.com/search?hl=en&client=safari&rls=en&q=Z0G8-3GB%29&btnG=Searc h
    or
    http://www.epinions.com/MacDesktops--price_range_20006000
    The first one compare to the 4th one. Ignore the stores. I'm not buying from them. I just want to show both computer on the same page.
    Again, they have a different manuf. number. Is it just because it's 6GB instead of 3GB ?
    So a store in the West, with no affiliation that I know with B&H in New York, sells a computer with a BH stock number ?
    I know the saying of "if it's too good.."
    I checked with the BBB there's no complaints about this company.

  • Is the Apple Mac Pro RAID card (v 2.0) compatible with the Mac Pro (v. 1.1)?

    Hello,
    Just wondering if any of you experts know if the Apple Mac Pro RAID card (v 2.0) is functional with the Mac Pro (v 1.1)?
    I have an original Mac Pro and a new (black) Mac Pro RAID card. I would like to know if I can get any functionality.
    I initially thought that the only difference was that the later RAID card did not have the same limitations on the HDs. I am aware that my original Mac Pro has a SATA II bus rather than a SATA III bus- but I am hoping this will not present any issues other than speed.
    I am currently using Disk Utility for a striped software RAID (0) but would like to move to a parity hardware RAID (5); hence the purchase. If this isn't possible I'm not overly concerned as I managed to get hold of the RAID card for next to nothing so thought I would take the chance.
    Any feedback would be appreciated as everything I've dug up online over the past few days has been a little inconclusive.
    Julius.

    The black-substrate card requires a 2009 or later model, and works only in slot 4, which has a special connector for it there.
    The blue-substrate card requires the ipass cable and connector feature in the 2008 and older models.
    These cards are both showing their age, and limit drive size to 2.2TB each. Their data-backup batteries have been extremely troublesome. You should probably look at other alternatives as well.
    Mac Pro RAID Card: Identification and compatibility

  • My Mac Pro will not power on. I've replaced the power supply, still will not power on. Is there anyone with a solution?

    My Mac Pro will not power on. I've replaced the power supply, still will not power on.
    Is there anyone with a solution?

    Try a pram reset:
    http://support.apple.com/kb/HT1379

  • Apps store icon no longer available, book shelf will no longer access the store, and my mac pro will not sinc apps with my iPad.  What's up??  How do I correct?  This is after upgrading to iOS6 and Mountain Lion.

    Apps store icon no longer available, book shelf will no longer access the store, and my mac pro will not sinc apps with my iPad.  What's up??  How do I correct?  This is after upgrading to iOS6 and Mountain Lion.

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

    I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

    Generally, it's ok to install on two machines as long as they are both yours and you only use one version at a time.
    BTW, this is the forum for Adobe Contribute.

  • When watching my Apple TV (3rd gen) the picture jumps a few frame every few seconds, this happens when I rent a film or play back from my new Mac Pro, my Wifi is the Airport Express.

    When watching my Apple TV (3rd gen) the picture jumps a few frames every few seconds, this happens when I rent a film or play back from my new Mac Pro, my Wifi is the Airport Express.

    These may be different issues, but lets look at rentals first.
    Poor motion can result from mismatched output. If your source is 24 or 30 fps you should set the output of the Apple TV to 60 Hz, for 25 fps content use 50 Hz.
    Additionally motion software on the TV itself can cause the picture to jump, check your TV settings and turn off any motion settings in use,

  • I have a 2009 Apple Mac Pro with no windows,can I surf the web on virgin media wifi

    Can I surf the web on the Apple Mac Pro with out windows on Virgin media wifi

    What are you asking? Are you saying you do not have Microsoft Windows on your computer? If so, Microsoft Windows is not needed to surf the Internet. Or, are you saying that the site you are surfing to requires Windows Internet Explorer which you do not have?
    Rephrase your question being more specific as to your issue.

  • I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

  • CAN the Mac Pro deep-sleep with the Apple Raid Card?

    So, reading through previous posts, there seems to be a problem (or 'feature' to charge the battery?) that prevents the Mac Pro from sleeping when the Apple Raid Card is installed.
    Can users owning this setup corraborate? Is this indeed the intended way to work?
    Thx,
    Dan

    as far as I know, deep sleep is only available for portable machines. if you meant regular sleep I cant help you because I haven't got a RAID card.
    edit: I may have confused deep sleep with safe sleep… sorry.

  • My Mac pro will not boot. it gets stuck on the grey screen.

    My Mac pro will not boot. it gets stuck on the grey screen. What can I do?

    Mac OS X: Gray screen appears during startup
    If using 10.7 or later, the Installer/Utilities DVD has been replaced with a special emergency partition on the Hard drive called "Recovery_HD"

  • 2009 Mac Pro will not boot up under Windows

    I have an Early 2009 Mac Pro system (Mac Pro 4,1) and I've had this system for 3 years already and have been working under OS X with this system ever since I purchased it.
    However, when I tried to boot off my Windows disk, something very interesting happens. The Mac Pro WILL NOT boot up off the Windows disk or a known working Windows partition if two monitors are connected. Upon holding down the option key and selecting the Windows partition, I will get a black screen on one monitor (the one connected via Mini Displayport) and the other screen receives no signal and will enter standby and the system is halted. It does not respond to keystrokes, there is no hard drive activity, no measured power increase on the UPS, no apparent network activity, nothing. The only way to exit this scenario (from what I can tell) is to power off the machine, disconnect the display on DVI, power on the machine again, select the Windows partition wait for the system to reach the login window and reconnect the DVI monitor (at which time Windows recognizes it immediately and the system works fine again).
    My question to the community is, does anybody know why this is happening and is there a known fix for this? Quite frankly, having to disconnect a monitor just to restart is very tedious and frustrating. 
    I have two Samsung P2350 monitors attached to an ATI Radeon HD 4870 (512MB, from Apple). One is monitor is connected via directly DVI and the other is using a Mini Displayport to DVI adapter. Both monitors work fine under OS X with no issue. At first, I thought that this may be a driver issue on the Windows side and after installing all the latest updates and drivers the issue is still apparent. From what I can tell, this doesn't seem like a software issue but rather a firmware or EFI issue as this happens before Windows even loads.
    If anyone knows of a fix or what to do in this situation, or if you are also having this issue, I would love to hear your input!
    Thank you!
    For the record, I am running all the latest software builds on the OS X side (10.7.4, not that it would really matter at this point). I have also disconnected all unnecessary equipment in a trial and error scenario but the results are still the same.
    The system passes all ASD testing.
    The full specification of the computer and all connected equipment are as follows:
    2009 Mac Pro (4,1) 8-Core
    2x Intel Xeon Nehalem 2.66GHz Quad-Core CPUs
    16GB DDR3 ECC 1066MHz RAM (Apple Branded)
    Two OWC 120GB SSDs (One for OS X, the other for Windows 7 x64) - These are in place of my optical drives.
    4x 2TB WD Black Hard drives for storage.
    Two Samsung P2350 Monitors connected via DVI. (One using a Mini Displayport to DVI adapter).

    In Windows I am using the latest (12.4) Catalyst Software Suite, 64 bit of course, downloaded directly from AMD's site after installing the drivers from Boot Camp.
    As for installing Windows I used an original (not burned) installation media (Disk is in a pristine condition). And yes, Windows is fine, the problem just seems to be getting the system to boot up Windows with that second monitor. However if the "problem monitor" is disconnected the system boots fine 100% of the time and connecting it later after booting the system will still operate properly.
    For the sake of arguement I swapped monitor cables and connected the "second" monitor to the mini displayport adapter to verify that it wasn't a cabling issue and I'm still yielding the same issues.
    As for GPU testing, I've played games (Crysis, Grand Theft Auto IV, Battlefield 3, etc.) and I've had no issues with the card or stability.
    You would think that Apple would try to find a fix for this, especially considering the caliber of this machine.

Maybe you are looking for