My apple mac pro won't charge

My MacBook Pro computer won't charge

Apple Portables: Troubleshooting MagSafe adapters
http://support.apple.com/kb/TS1713
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

Similar Messages

  • Mac Pro won't charge!!

    I have a MacBook Pro mid 2009 and it won't charge, it used to only charge when the computer was closed but now it won't work at all!! Anybody know a solution to this issue? (Btw I still have the original charger that came with the computer)

    Welcome to Apple Support Communities
    Have you tried to reset the SMC? > http://support.apple.com/kb/HT3964
    Also, when you try to charge the battery, does the charger light turn on? If not, it may indicate a problem with the charger. Apart from that, open the "System Information" or "System Profiler" app (in /Applications/Utilities), select "Power" in the sidebar and copy here "Charge Information" and "Health Information" to know more about the battery

  • My apple mac pro won't get past opening grey screen with revolving circle

    when I turn on the apple mac there is the blue screen with apple logo and revolving circle - nothing else happens

    Hi johnjak,
    In order to troubleshoot this issue where your Mac Pro is getting stuck on a gray screen with a spinning gear, please follow the steps in the article linked to below.
    Mac OS X: Gray screen appears during startup - Apple Support
    Happy Holidays!
    Alex H.;

  • My mac pro won't charge even though its plugged in?

    i have a new macbook pro 13" bought in july. and today when i plugged into the power source it would not charge? the light on the charger has not turned green or red to say it is in. even though it is?  to answer the basic questions yes it it is in a working power point, and yes it is turned on. there is also no damages or scratched to the cord. Someone please help!!

    Try resetting your SMC:
    http://support.apple.com/kb/ht3964

  • My Mac pro won't charge, whats going on?

    My keyboard no longer lights up, how do I fix it?

    Try the directions offered here:
    http://support.apple.com/kb/HT3964
    You will find links on that page to various models, look for the specific Macbook you have.

  • My Mac book pro won't charge. But the connector is plugged in and shows that its charging but it says it has 0% but if I unplug it it will shut off

    My Mac book pro won't charge. But the connector is plugged in and shows that its charging but it says it has 0% but if I unplug it it will shut off. It's been like this all day but I didn't notice till I turned it on.

    It's either a power adapter issue (not likely) or (more likely) a power supply problem on your MBP. Take the machine into your local Apple Store or an AASP and have them diagnose the problem.
    Good luck,
    Clinton

  • Went on my vacation, brought my macbookpro, got home, mac pro won't acknowledge photos.  Why?

    Wife uses the macbookpro mostly with her iphone.  However, they are my photos on my phone, and all computers are mine, so why in any case because I have synced with another computer with also uses another iphone, that my personal mac pro won't acknowledge the photos that originated from my phone.  Photos shouldn't be subject to copyright like music purchases.  If I decide to share my photos with another mac (which also happens to be my macbookpro that my wife uses), there shouldn't be anything applied to the photos I've taken with my personal iphone once it is plugged into my other mac.  They're my photos regardless and originated from my iphone, so my mac pro should never block these photos from me in iphoto.
    Summary:
    I go on vacation with my macbookpro.
    I take photos with my iphone.  I put them in my macbookpro while on vacation.
    I get home.  I try to put the photos on my macpro.  Not only am I not allowed, I can't even see the photos in iphone via my plugged in iphone.  They are hidden when plugged into my macpro.
    Why don't I have access to MY OWN PHOTOS when I have spent well over 50,000 dollars in Apple products? 
    To fix this I had to export the photos from the macbookpro to a USB and manually add them to my mac pro.  Alternatively I could plug in my iphone to my windows computer and access all the files via a folder search.

    Another way to look at this which imo also applies.
    I go on vacation with friend.  I take photos with my iphone.  I sync some of the photos to his iphoto on his macbook.  I get home.
    I can no longer see those photos, which I took, using my own iphoto sync on my mac.  They don't show up anywhere with preview or image capture (remembered name).  Just because I gave my friend some of my photos, doesn't mean a lock should be applied that doesn't allow me to sync those photos via iphoto on my own mac.  Doesn't this make sense?  Why is this happening?

  • I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

    I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

    Before you sell or give away your computer, in addition to the steps mentioned in this support article, take these steps:
    Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
    Reset the PRAM and the SMC, which might contain personal information.
    If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
    If you activated FileVault in OS X 10.7 or later, turn it off.
    If you use Boot Camp, the partition must be deleted
    If you created any other data partitions on the internal drive, remove them in Disk Utility.
    Erase the data partition(s) with the option to zero out data. An SSD doesn't need to be zeroed.
    You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall  an older OS, either from the installation media, if applicable, or by booting into Internet Recovery (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
    If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer with the machine.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
    The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either.
    Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

  • My macbook pro won't charge due to an electric shock

    My macbook pro won't charge due to an electric shock that was caused from a charger that was in a bad condition, the computer didn't turn off when it happened but it stopped charging. When the battery died it refused to charge with any charger, I even bought 2 new ones. I sent it to apple and they are asking $650 for fixing it! The problem is that the macbook is only a year and a half old and I live abroad where there is no apple branches or any of that. I had to send it to the USA first. Also, I might lose everything saved on the macbook after fixing it! Any solutions? please help!

    qhqpaliwallah wrote:
    I might lose everything saved on the macbook after fixing it! Any solutions?
    My computer is not working, is my personal data lost?

  • Mac pro won't restart after replacing backplane

    Mac pro won't restart after replacing backplane. I tried resetting PRAM, no luck. The grey screen with apple logo and spinning wheel shows up and the wheel continues to spin.

    What did you modify 'under the hood'?
    Mac OS X: Gray screen appears during startup - Support - Apple
    Read as MBP.
    Message was edited by: nbar

  • Mac pro won't read windows 7 install disc?

    My 2007 mac pro won't read windows 7 install disc. My macbook reads the disc fine, so it is not a problem with the disc. It is 32-bit. The apple help line suggested firewire connecting the macbook to the macpro and starting the macbook in target disc mode, but other posts I have read have said that this will not solve the issue. Any suggestions?

    Could be. I just rebooted and it read the disc. Unfortunately the windows install got interrupted and I had to reboot, and now it wont read the disc again. Is there any other way to install windows 7 to bootcamp, other than from the disc? Can I use FireWire and target disc my MacBook (the MacBook reads the disc just fine)?

  • My Mac Pro won't connect to Wifi?

    My Mac Pro won't connect to the Wifi that it has been for the past 2+ years. All other devices in our home that use the same Wifi are working just fine.

    Tried doing Network Diagnostics multiple times, did not work. Keeps saying it can't connect or times out.
    What color was the light pertaining to Wifi in the left column?  Red, Green, or Yellowish/Orange?
    Some of the following you may have already tried:
    Try the basics first:
       Change your router channel number.  Most times this works & is all you have to do.
    Disconnect & reconnect your modem.  unplug it for about 10 seconds.  Plug it back in.  Do the same for Apple’s routers.  Wait for everything to reboot.
    System Preferences>Network
    Click the Assist Me button.
    In the next window that pops up, click the Diagnostic button & do the necessary.
    Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer.   See these basic networking KB Articles:  http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
    http://support.apple.com/kb/HT4628  Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
    Manually provided DNS server addresses are higher priority than DHCP's
    http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    ============================
    What to do when you can't connect to the Internet
    Also, run the Airport Utility app which is located inside the Utilities folder.
    =====================
    If using a  Linksys router, contact LinkSys Customer Support and/or post in their forums.
    If using Apple's Airport, please re-post over in one of the AirPort Forums.

  • My apple mac pro will e in the  car while we are skiing. It is 2 degrees out. I thinkit will be come frozen. does that create damage or can it defrost?

    my apple mac pro will e in the  car while we are skiing. It is 2 degrees out. I thinkit will be come frozen. does that create damage or can it defrost?

    Look at the Power and Operating Requirements shown in http://www.apple.com/macbook-pro/specs-retina/ and note the temperature limitations.  If you leave it in the car for a period of time, make sure you do not try to use it until it has warmed to room temperature.
    The low temperature can affect the battery so you may need to charge after it has warmed, do not do so while it is still cold.

  • My Mac Pro won't start.  It turns on and then a blank, white screen appears.  What do I do?, My Mac Book Pro won't start.  It turns on and then a blank, white screen appears.  What do I do?

    Mac Pro won't start.  It turns on and than a blank, white screen appears.  What do I do?

    This could be a software/state problem or a hardware problem.  Here are steps to resolve the former.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570

  • My Mac Pro won't start

    My mac pro won't start have a light on and sometimes have a green light on caps key.

    Hello there hoc5050,
    It sounds like your computer is not turning on consistently. I would recommend the troubleshooting in this article to help you determine what might be causing the issue, named:
    Troubleshooting: My computer won't turn on
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

Maybe you are looking for

  • A big problem of Generate report with PDF format....Urgent

    I want to generate a report with pdf format through one java file, it have two page 1)gen_report.jsp 2) report_gen.java , the compliation was failed. However, i don't what the problem is .... i hope anyone can help me as it is very argent for me ....

  • Approver Delegation failed in GRC AC 10.0

    Hi GRC, I am looking for urgent help. I delegated my access to respective approver in GRC AC 10.0 System and I created one Request and select manager field as my name in GRC Access Request form. As per delegation process request should go to respecti

  • Purchased Music not showing correctly in Music App

    HI Something weird i've noticed on my iPhone, I am using iPhone 6 Plus with iOS 8.1 (latest build). I purchased an album X Factor Song book (https://itunes.apple.com/gb/album/the-x-factor-songbook/id935644800) as you can see on the link there is 60 t

  • By default first tab should open, when user clicks on the Open popup.

    Hi Team, I am working on Jdev11g. I am facing problem to Open Fisrt tab from popup when i revisite to it irrespective of the Tab which was earlier selected while closing the popup. Currently i am populating one list for records in ADF table and in fi

  • In MB1B how to get Material description?

    Gurus, At the time of making 541 movement through MB1B referencing the PO, system should show the material Description also.Presently system shows only the Material Code but not the Material description. How do I get the Material description in MB1B