My Apple Mobile decive doesn't recognise my iPhone and refuses to start.
My Apple Mobile device doesn't recognise my iPhone and refuses to start, I've tried all the trouble shooting options on here and none of them have worked, culd someone help me out please?
Make sure you have the Latest version of iTunes installed on your computer...
http://www.apple.com/support/itunes/install/
Are you running as an administator...
Have you ever used this phone with this computer before...
Similar Messages
-
Apple Mobile Device can't recognise my IPhone
I have a IPhone 16GB (not G3)and it workes for about 4 months without a problem. After a Crash during update the iTunes SW iTunes cannot find my IPhone anymore. I have removed all Apple software many times and reinstall it but always the same...
Also after cleaning my Registry It's not possible to connect my IPhone. A manually start the Mobile Device will stop it automatically after 1 second.
I tryed to go to a saved earlier Version (Saved System XP-Version)but also this does not help me!
Also the manual on the support page support.apple.com/kb/HT1925?... does not help me!
Sometimes during the new installation the Installation stops at Bonjour
My Computer has only buyed SW installed (Magix Video deluxe and Samplitude) and nothing more
I'm using Avira antivir SV (the stopping of that does not help)!Welcome to the discussions,
Did you try these suggestions?: "iPhone not recognized in iTunes for Windows" http://support.apple.com/kb/TS1495 and "Using MSCONFIG to troubleshoot conflicts in Windows XP" http://support.apple.com/kb/HT1275 -
Can anyone help, I have removed and re-installed the 64 bit version at least 10 times now.
Success!
By completely removing all reference to apple or iTunes/iPod/ Safari etc from my computer, it has at last installed. -
iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have reinstalled itunes multiple times but apple mobile device doesn't download. how can i fix this or download apple mobile device
Type "apple mobile device service" into the search bar at the top of this page by "Support" and read the resulting articles.
-
I was told to uninstall then reinstall itunes because "no apple application support", so i did, now it wont recognise my iphone and says to unistall+install the 64-bit version of itunes so i did, again..and again..still nothing please help me?!
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
I am trying to download itunes to PC and it downloads but then says Service Apple Mobile Device failed to restart. Verify sufficient privileges to start system services. What do I need to do? I am an Administrator on the PC so what else needs attention?
Hi txatxo
Thanks for using Apple Support Communities. You may need to restart the Apple Mobile Device Service. This article has instructions for doing this:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
If that doesn't resolve the issue, I would recommend trying a thorough uninstall and reinstall of iTunes as described here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari -
I have an apple id which I have been happily using to purchase from iTunes and it appears magically on iPad and iPhone, MacBook and partner's iPod touch. Now I have done something wrong in iCloud and my mobile me Id comes up on iPhone and iPad so I can no longer purchase using this and i can't find a way to reset What should I do? I want to be able to buy apps from iPhone and iPad from this same account and still synch with my mac book and share with my partner's iPod touch.
Any suggestions?We are users, not Apple. We cannot trace your phone, and neither can Apple.
Please change every password you have. Posting your email addresses and Apple IDs on a public forum is insane. Hopefully a Mod will edit them out for you. -
hy, does anyone know why my computer doesn't recognise my iphone? I can't seem to make it see the personal hot spot any suggestions? thanks
Did you update to iOS 7? If yes you need to update iTunes on your computer to iTunes 11.1
If you are using iTunes 11.0 and iOS 6.x then show the left sidebar in iTunes.
When in iTunes on your computer use the View menu to View Sidebar. The device should show up there when connected. -
I bought my iPad in USA. It was set up over there.i live in Ireland.when I try to buy from apple store it doesn't accept my details and says I must put in my USA address.can this be changed?
Walk it into the nearest Apple Store there in Ireland, admit you purposely avoided buying it there, and ask them to help you sort it out. I'm sure they'll be happy to service your overseas purchase.....
-
The iTune cannot detect my iPhone 4S. I have already tried all methods suggested, including re-installling iTune, re-activating Apple Mobile Device, plugging in various USB ports, and etc. I use windows 7. How can I solve this?
The new cable is completely new, and my computer can detect the phone as a drive, and battery charging is ok. So I believe the USB cable works properly. It is so weird that just iTune itself cannot detect the phone, and it is of the most updated version. What else can I do? Thanks.
-
Can anyone tell me how to transfer photos from iphone 5 to my computer? my computer doesn't recognise my iphone as camera or drive at all and there is no option for me to down photos from itune either
Try taking a new picture with your iPhone then reconnect it to your computer.
-
My computer doesn't recognize my iphone and now my iphone displays the apple and I can't use it. What can I do ?
First, try to do a hard reset of your phone. (Hold down the Home button and the sleep/wake button at the same time for about 10 seconds. When the screen flashes and the Apple appears again, release the buttons.)
If that doesn't work, then you may have to put your phone in restore mode.
Power off your phone and disconnect it from the USB cable.
Close iTunes.
Then press and hold the Home button and while keeping the Home button pressed down, connect the phone to the USB cable.
Continue to hold the Home button pressed down.
After a few seconds, you should see the display prompt you to connect to iTunes.
After that, you should be able to restore your phone from iTunes. -
My apple id shows to be disabled on iphone and ipads but workd on PC. Have tried changing password on PC and signing out and back in on devices with no results. How do I reenable my ID so I can update and purchase apps?
Contact iTune Support
https://ssl.apple.com/emea/support/itunes/contact.html -
I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68
HI,
The Apple IDs from @mac.com and @me.com (Older MobileMe and more recent iCloud Names) are also Valid AIM Screen names.
Any other sort of Apple ID is not a Valid AIM Name.
A Google ID that is associated with Google Mail Account (And has "Talk" enable on your Google Settings) can be used in iChat as Jabber Name/ID. (Google Run Jabber server).
Jabber and AIM are different IM Services and it is not easy or straight forward to add Buddies from one Service to the Buddy List of another. (As A Starting point consider it "impossible")
iChat 4 and 5 have links to the registration page of @Mac.com here with a "Get an iChat Account" button in the add (Account) screen (You select @mac.com or MobileMe and then press the Button - Choosing AIM and then pressing the button used to lead to the AIM registration page but AIM moved their page).
Apple IDs can be any valid email (or an @mac.com or iCloud registration)
Therefore you could make a Google ID into an Apple ID.
However this will not be a valid AIM Screen Name the way @mac.com or MobileMe/iCloud ones are.
Valid AIM Screen Names in Table (pic)
7:46 PM Monday; December 5, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously
Maybe you are looking for
-
Using DYNP_VALUES_UPDATE with a Maintenance View
Hi, I am using a maintenance view to insert values into a table. When user creates a new entry, based on the value provided for a field,I need to fill a read-only field. In PAI, when user enters a value for one field, I am using FM 'DYNP_GET_STEPL' t
-
Hi, I am trying to send an EDIFACT file to IDOC through AS2 Adapter (sender). Can you please tell me how to configure the sender AS2 Channel.I have configured it, but it is giving me the following error in Channel Monitoring. Alert: Maximum number of
-
Problems importing servlet classes
When I try to compile a bean which has import statements for importing servlet classes, I get the message that the class is not found in import when I compile the code. I have all these class files and I'm not sure whether I've placed them aptly. Ple
-
Applying a class to a button on a page
Using APEX 4.0.2 Trying to style a button on a form. BUTTON STYLE = Template Based Button BUTTON TEMPLATE = Button BUTTON ATTRIBUTES = class="btn btn-primary" When I firebug the page the only class I see applied is "t3ButtonHtmlMiddle". Is it possibl
-
Can i get help on procedures for amending passwords
can any one help me write the procedures for creating user as well as amending the paaswords of userS??