My apple new apple ipad wifi connectivity is poor
hi presently iam using latest ipad. i observed its wifi connectivity is poor. when try to connect ipad via wifi it is taking lot of time some times not getting coneect if the signal is poor, while my laptop, my phone and my ipod were connecting very fast. is their any solution.
If your router is dual-band, try ensuring that the SSID is different for the 5GHz band from the 2.4GHz one.
If sounds like your other devices which have no issue would all be 2.4GHz only.
If this is the case, try updating your router firmware - latest can firmware can make it easier for dual-band devices to connect firmly to the router without 'hunting' between signals of similar strength from the two bands from the same router.
Similar Messages
-
I was using the iPad one day and then all of a sudden it stopped connecting to the internet. The network at this hotel is very good and I've asked them about their router so it is not the router's problem.
I go to the Settings and tap on Wi-Fi then I tap on the hotel network. After a few seconds, it says the network name beside the Wi-Fi tab and it gives me the WiFi symbol showing 3 bars. But then I never get the checkmark or tick saying everything is connected. I try going online and it says the iPad is not connected to the internet. I've tried an iPhone and it connected and got a checkmark in a few seconds. I've talked to the front desk and he took out his phone and showed me that he could connect, he even opened a page without any problems at all.
I've been trying to find a solution for this for a long time. I've been searching Google over and over again. I turned Airplane Mode on for 1 minute, I've tried Resetting my Network settings, I've tried forgetting the network and reconnecting again, I've tried removing all restrictions from the iPad, I've rebooted the iPad A LOT, etc.
So this is my problem for people who don't want to read the whole message:
1. I can't connect to the internet with the iPad
2. It shows the WiFi symbol saying its connected but I never get the checkmark or tick.
3. It's not the router problem.
4. I've tried other networks and it doesn't work. It just keeps on showing that loading circle right beside the network name.
5. Do any of you know what this problem is? Or do you have a solution?
Thank you for reading this and have a great daySince you are in a hotel, some of these are not applicable.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Are there any known issues with iPad wifi connections to Comcast routers
I consistently get the "unable to join network " error when trying to connect to my Comcast all in one router. My other laptops and smartphones connect without issue. I'm using 32GB iPad2 with wi-fi + 3G. Coincidentally I switched to comast at the same time I did the 5.1.1 update. Prior to the switch i had a fios router and 5.0 OS version. I've tried resetting the network info on the iPad and I've reset the router as well. I can see the network just cant connect to it.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My ipad wifi connection cuts out I have a airport express
My ipad wifi connection cuts out I have a airport express I tried to reset wifi and it still cuts out
Try resetting the iPad (hold the home and power keys down until the Apple logo appears).
Barry -
So disappointed with IOS 6. I'm having weak wifi connection since upgrading to it. Can Apple do something about it? Can you at least reset it to IOS 5.1.1?
Sorry Jim for the wrong question because I'm getting frustated with my IPAD since I can't use it for surfing internet with a faster speed. Ipad was very convenient to use until this IOS 6 upgrade. Tried all the suggestions in the forums but still gets back to weak wifi connection.
-
I cannot connect my apple tv to the wifi bc of the web page authentication. When signing my other iOS devices on the network an immediate web page pops up with a user agreement to check and agree. How can I do this with the new apple tv?
Welcome to the Apple community.
Unfortunately that isn't possible with the Apple TV, the Apple TV does not have a web browser. -
My Apple TV loses/regains wifi connection every 10seconds.
Installed my Apple tv yesterday, connected with my wifi, and everything worked fine.
Now Apple TV gets/loses the wifi connection approx. every 10 seconds.
Got other devices using same wifi without probs, both IOS (iPhone/iPad/Macbook) , android phones and pc.
Maybe something with the router configuration, but as said other IOS devices works excellent with wifi connection.
Anyone got a clue what could be causing this?
Regards K HartvigAre you literally unplugging it or just putting it to sleep?
-
Apple TV3 not find wifi connection
Apple TV3 only works on Ethernet cable not find wifi ?
If I connect the ethernet cable finds wifi connecting when the ethernet cable disconnecting from apple tv not find Wifi.Does it broadcast ssid?
Wha encryption is used?
Hve you updated the firmware of the router to the lates from the router maker? -
Im having trouble with my ipad wifi connection my mac air has no issues but ipad not working
hello,
Im having trouble with my wifi connection.
Ive reset the router, reset all my connections, still no good.
It keeps spinning when trying to connect
my mac air and other apple products are fine on same internet connection
the cellular connection works just having issue with ipad3i did the reset of network settings.. still no good. recently upgraded to new os 6.1 version any way to go back to older version of os?
-
IPad wifi connection password not memorized !
Every time I turn on my iPad I have to re-type the password !!! All my other devices work fine, so definitely it's an iPad problem.
Apple, do you read these messages? Any software updates coming soon to fix this major issue?Mache wrote:
Every time I turn on my iPad I have to re-type the password !!! All my other devices work fine, so definitely it's an iPad problem.
Apple, do you read these messages? Any software updates coming soon to fix this major issue?
Actually Apple doesn't read these messages. These are user-to-user forums.
To report a problem to Apple visit http://www.apple.com/feedback/ipad.html or contact Apple support.
Perhaps someone could offer some help if you gave some details of the specifics of you problem, i.e., router make and model, encryption type (WEP, WPA, WPA2), WiFi type 802.11g or n, etc.
The iPad should automatically connect to known networks. Note that for most iPad users this is the case. If you search these forums you will find many posts about having to re-enter WiFi passwords see also Apple trouble shooting guide 3304 - http://support.apple.com/kb/TS3304
Message was edited by: JimHdk -
I just spent 15 minutes holding and 20 or more minutes on the phone speaking to incompetent tech help people two days in a row. They asked the same questions and went through the same useless steps trying to get my iPad's wifi to work. Nothing worked and neither tech even remotely understood that it was a Verizon problem not an iPad problem (connected fine to 3 outside networks). Finally I just hung up and reset my router to factory specs. Miracle! that worked! Needless to say that I am totally underwhelmed by Verizon's tech help.
MSM wrote:
Thanks for your input but WPA2 worked (barely) with my MB air, the connection was iffy. It did NOT however work with my iPad 2 and THREE Verizon techs could not fix it. So, until someone comes up with a solution for that I will stay with factory settings.
Maybe it would be worthwhile bringing your iPad to the genius bar to see if an Apple tech might have a clue what the problem is.
For whatever it is or isn't worth, I have an Actiontec Rev I router set to WPA2. All our devices connect with no problem, including an iPad2, MacBook Pro with Mavericks, an iPhone 5 and a 5s and a couple of Windows 7 machines. Frequent guests' devices also connect with no problem. -
My IPad wifi and Internet connection goes on and off. But when I being my IPad to other homes, it works. What's wrong?
Try this
Settings->General->Reset->Reset Network Settings
Then rejoin the wifi.
If this does not work try this
Settings->WI-FI->The wifi name->Forget this Network
Then rejoin the wifi.
If this does not work try this
press the home button and lock until you see the apple logo.
I hope this works ;-) -
I checked my Airport Extreme stats to se what my new iPad is connecting at, I was very disappointed to se it connects at only 39Mbs. Even my gen1 iPod touch connects at 54MBs and my Macbook over 100Mbs. I verified my speed on a Time capsule with the same results.
What are others seeing?
JoeFor those that are seeing problems, did you make sure your FW is up to date on the AEBS?
If you have a Mac click Applications>Utilities>Airport Utility. You should see your base-station in there and there will be a button that says update firmware. Click that and make sure it's up to date, then report back.
I suspect that could be one potential reason if the iPad is not seeing any throughput issues only reporting the wrong number. What you are saying would suggest to me it's not the iPad HW, but potentially the SW of either the iPad or AEBS. But if I was a betting man, I'd say it's older FW on the airport, since the client will connect to whatever it's told to connect to. The AEBS would control what it should connect to. -
IPad update to 4.3.5 wifi connection very poor
I have a iPad wifi 3G. The wifi connection use to be fine but after I updated to the 4.3.5 the connection became very unstable. It usually auto disconnect every 5 mins and will back to normal in 2 mins. it was very frustrated especially when I am watching YouTube
If anybody know the cause and solution plz reply under will be much apperciated
RegardsTap Settings / General / Reset / Reset Network Settings.
If that didn't help try here > iOS: Troubleshooting Wi-Fi networks and connections -
Dear Users,
Can anyone assist me, I have 2 Apple Airport Express recievers and an Apple TV2 connected to my iMac. The Apple TV is connected via ethernet and a gigabit switch via the BT Infinity Router. The 2 Apple Airport Expresses are connected via wiresles to the BT router.
Everything works fine, music streams perfectly most of the time.
But after 24-48 hours of being dorment the Router seems to drop the wireless connections to the Apple Airport Expresses, if you reboot the router they connect again immediatley. I have adjusted the router settings to 802.1n, instead of 802.1n/b/g, which seemed to work better for a few days and the connection never dropped and now the problem has started again.
Frankly its not the end of the world, but it means I have to reboot the router everytime we want to use all zones for music, which when you have a wife that moans that 'my setup is too complicted and has to be rebooted everytime', it would be great to resolve this for once and all.....
Have a I missed something simple or do I need a new router/Airport Extreme?
Thanks in advance
MattThe whole idea here is to test by first powering off your "extending" AirPort.
Then, take a measurement with your laptop at the location of the "extending" AirPort.....to see what quality of signal that it is receiving. Remember, it can only "extend" the quality of signal that it receives.
You would want to see a minimum SNR of 25 at the location of your "extending" AirPort Express. Higher would be better. If it is less than 25, you need to move the "extending" Express closer to the "main" router so that it will receive a better quality signal to extend.
Once you have a location with a decent SNR of 25 or higher, then power the "extending" Express back up at that location.
Maybe you are looking for
-
Intercompany billing exchange rate is not updated on change of the currency
Hi, I create a intercompany billing via VF01 with reference to a outbound delivery, and the currency is picking up from the customer master which is USD. But I need to change the currency to be the same as the PO which is GBP. So I change the currenc
-
Photoshop CC and Bridge CC crashes during work
On a brand new Macbook Pro Retina (OS X 10.9) I have some problems : 1. Photoshop CC crashes without any reason during work on pictures 2. Bridge crashes during working in ACR 8.3. (Makel entfernen) and during saving from ACR 8.3 3. Bridge CC is load
-
Java interaction with websites?
Hey, I'm been learning java for a few months now, and know the basics well, I have written a few small programs, including one which transfers songs from iPod to computer. I need some advice on where to start on my next project. Basically I want to m
-
I am currently working on a project that proposes to use XA transactions with MS SQL Server 2000. I have been searching for information on this subject and have found information that worries me with regard to MS SQL Server 6.5 and XA transactions. T
-
While i am creating a table in my schema i got an error like the following ORA-01630: max # extents () reached in temp segment in tablespace. shall i want to increase the max extent of my tablespace?