My apple stops its startup process in the apple symbol screen and keeps loading
My macbook has some startup problem as it keeps loading in the apple symbol screen and doesnt load to login screen. I have tried resetting PRAM and it produced no change. This problen occured when i logged out of guest account to reach admin account where i noticed the login page loading for a long time
See this Apple note on that boot issue.
Similar Messages
-
Ipod touch stuck on apple logo screen and empty loading bar
This is what happened. I got a friend who knows how to download games in my ipod touch. But as it turned out He broke it
He cant restore it. I tried DFU mode the restoring. and even Redsnow! its just stuck on a Apple logo and an empty loading bar under it.
and when you look at itunes it says "waiting for ipod" but it doesn't do ANYTHING! i left it like that for 2 days and it haven't load a single bit.
please help. if you have an answer please give the steps. Ive been searching for the past two weeks on my own and i can't fix it.Try mstarting with the bold
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i am having an MacBook Pro 13inch , having an Startup Problem , the time i press the power button after few seconds the apple symbol appears with a loading sign below it and wont go further ahead of it . My data is all in the hard drive .. . I even tried the Internet recovery but no use !!!! but still no respons and the recovery and macintosh hd is now lock! but earlier only the recovery is lock and after both of them is lock. i can reinstall,... and i didnt try to back up any data bec i dont know how? so please help me to resolve my prroblem.?
luoie wrote:
This thing happend,, it say Disk utility stopped repairing "Macintosh HD" disk utility can't repair this disk
Sorry, possibly you need a new hard drive or try reformating. First
you can try something like http://www.alsoft.com/diskwarrior/ it has been known to repair disk that DiskUtility could not. YMMV and they don't give it away.
If Disk Warrior can not repair then you need to Reformate the drive. Make sure you have a back-up in place no matter what.
http://www.apple.com/support/backup/
Disk Utility will tell you something about it's SMART status: -
when i plug in my ipod touch it goes to the battery witht he bolt under it the goes to the apple logo screen and after a while it will flash white like its trying to go to the lock screen but just restarts and restarts the process and keeps doing it. What should i do? Is there any way to fix it?
See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am going through startup on Macbook Air 11. When I get to the "Sign in with Your Apple ID" screen, I keep getting the message, "Couldn't sign in because of server error." I am connected to wifi. Any ideas on how to proceed?
Hello KathyBrust
Check out the article below to go over a few troubleshooting steps with issues connecting to iCloud. If you are still stuck, there are other resources to get a resolution.
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
Regards,
-Norm G. -
iPhone 4, stopped 6.0 upgrade in the middle of install, and now I just get the blinking apple. Can't even get it to restore or recognize my phone when I plug into the computer/itunes....
Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore
-
please help i upgraded my iphone5 to new ios7 yesterday 2pm and untill now its already 17hours and why cant access or back to normal?is this normal or stil upgrading? it only appears the apple logo on screen and keep coming the logo screen on and off.do i need to bring my phone to apple center or is this iops 7 takes longer time or an hours to successfully upgraded.please help me what can i do?
Anyone have any suggestions? or is everyone else just as clueless as me !
-
My MacBook Pro fell and now when I turn it on its stuck at the apple logo screen with a loading circle underneath it. What can I do to get passed this?
Sounds like something internal was damaged in the fall, probably the disk drive. Take to Apple and ask them to fix it.
Allan -
I have created Apple id and password to set up icloud but its not taking in the same login id and password. Should i have an Apple product in order to install icloud? becoz i am using HP PC
thanks riaYou can on create an iCloud account on an iiPhone, iPad or iPod Touch( running iOS 5 or higher) or Mac (running OS X Lion or higher).
After creating an account on one of these devices you can then sign into the account on your PC, but you can't create the account on a PC. -
my iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging when i connected to the laptop as well, bit confusing, help please
Take a look at this link, http://support.apple.com/kb/TS1538
-
My macbook doesn't work. After pressing down the power button I hear the sound from starting the apple symbol appears and after a while a sign prohibited appears on the place of the apple symbol
Hi Kappy Thanks for your answer. I did a reboot on my Macbook as suggested and this operation is going on non stop for 14 hours and on the screen always appears the same message that you can see in the picture in attachment. Any ideas?
-
my phone stuck on the log in screen and the only thing apears the apple logo why is that happening?
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps... -
I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file. I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix issues I had fixed in the single files. I need suggestions on what else can be done if any. Using Acrobat pro XI.
Out of habit, I tend to combine PDF files in the Page Thumbnails pane by right-click then "Insert Pages" -> "From File". For me, this preserves the tags from both documents, although the tags may have to be moved into the right location (if I recall correctly the tags for the inserted pages get put at the end of the tag structure, regardless of where the pages are inserted), If I first put the tags for the document to be inserted inside a container tag like Section, it makes the process easier. Moving that set of tags to the right place is the only re-fixing that I recall having to do. What behavior are you experiencing?
a 'C' student -
How can I change the Apple Store language and keep the country of residence?
How can I change the Apple Store language and keep the country of residence?
Users do not have control over the language of the Mac App Store or iTunes stores for a particular country or region. It is what it is and can't be changed.
-
While editing, muy photos stopped changing. Even as the red line moves and the music plays, the photo is stuck on first frame. How do I fix this?
BDAqua and old comm guy,
thanks so much for the good advice. I used both of these and now the problem has stopped. first I checked the finder crash logs and yes, my finder had been crashing repeatedly.
next I removed the preferences files from the library, rebooted from the CD and ran disk utility to repair preferences. since then my computer has been stable.
there were some preferences that didn't get repaired when I ran disk utility. I am copying them here to refer to later if I need to. I don't understand what these mean to me:
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/pppd" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/vpnd" has been modified and will not be repaired.
Maybe you are looking for
-
i have pulgged my phone in and i've been waiting about two hours now and it hasnt turned on when it is saying it is charging. What should i do? is it broken?
-
Add AdHoc on Header Level SC within Status "In Revision" (BRF SRM 7.0)
Hi all, we have implemented a n-step approval workflow within SRM 7.0 (BRF) If the SC is created, user can add AdHoc approvers on header level. Problem: If an approver rejects or changes the SC, SC is sent back to requisitioner and he has to accept t
-
Is there a way to get CF to overide the original file?
When I upload a file to cf, cf will rename the file if the file already exists. Is there a way to get CF to overide the original file?
-
Pass Select-option as FunctioModule parameter ?
Hi experts, I need to pass the Select-option parameter as import of a function module. How can i do that? Regards Dhanya
-
Upgrade optical drive OS issues
Hi, Please somebody; advice needed: On ebay I bought en older Macbook A1181 (2ghz, lion/win7) with combo Matsushita CW-8221. Now I want to upgrade it to an superdrive. ifixit.com shows as alternatives the P/N: UJ-857-C, UJ-867, or GSA-S10N and I foun