My Apple TV 2 does not recognize my laptop (Win 7), but I can select Apple TV speakers in ITunes

I am setting up my Apple TV, and cannot recognize my Laptop.
At first it showed it, but could not access it, now it just does not show it, I checked they are both on the same wifi, I have Home Share settings activated on both, but it still does not recognize it.
If I play music (radio) on Itunes in my Laptop, I can select to use Apple TV speakers, so they are communicating.
Please help.
Regards,

Could be, didn't think about that, will check tonight.
Thanks for your help.

Similar Messages

  • Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

    Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

    We need to find out what you actually have here. There is no Adobe Reader Pro. There is Adobe Reader and Adobe Acrobat Pro.
    With Acrobat Pro, you may be able to do some editing after running OCR. With Adobe Reader, you cannot edit.
    Which one do you have?

  • Yosemite does not recognize HP printer after upgrade.  I can print from my iPhone, but not my 13" Macbook Air (2013)Yosemite does not recognize HP printer after upgrade.  I can print from my iPhone, but not my 13" Macbook Air (2013)

    Yosemite does not recognize HP printer after upgrade.  I can print from my iPhone, but not my 13" Macbook Air (2013)
    Are others having the same problems?

    Try this. Worked for me.
    - turn off your router
    - turn off you Mac's after removing all available printers
    - turn off all iDevices
    - do a factory reset of your printer remove all cables min. 30 sec.
    - turn on your router first
    - ran the network set up wizard
    - give your printer also a new name like "DeskJet 2015"
       Something which you don't have used before.
    - turn on your Mac's and add your printer
    - turn on your iDevices at least.
    Should work after these steps.
    It worked for me including all iDevices.
    iOS and Yosemite

  • Airport Utility SW rel. 5.5 does not recognize AE under WIN 7

    Hi everybody,
    I have an issue using AE utility SW under WIN 7. Yesterday I bought an Airport Extreme. Connecting it in my network is working fine. AE is coming up and will stay with flashing amber. Internet connection is fine, so I can connect to the web. I did install Airport utility SW rel 5.5 from disk. It runs fine, entry page shows me AE with MAC address. Trying to connect and start configuration it will show window `searching for apple mobile devices` and will end with error message Code -4 - no network connection. I tried is with antivirus disabled, FW off, still not able to start configuration?
    Any help highly appreciated. Thanks!!!

    Just one more: did install AE utility SW also on a Win XP workstation, same issue, AE utility SW does not recognice AE device. I´m starting to believe the HW is maybe root cause.

  • Windows 7 does not recognize new laptop HDD?

    I got a new hard drive for my comuter, I went to install windows on it but the installer said is no drive there, and tells me to get the proper drivers. I don't know where to get the drivers, and it's a Western Digital so it uses the built in drivers from windows. My desktop recognizes the drive fine, but the laptop does not. Any help?

    Nevermind.  I removed the device, turned the power off and back on to let Windows reinstall the device.  That made the problem go away.  I should have tried that first.

  • Replaced hard drive and iTunes does not recognize my laptop

    My 2011 MacBook Pro froze up and when I rebooted the folder error came up.  Replaced hard drive with a SSD drive and my new OS has a new name.  When I logged into ITunes I had to delete an account due to my limit being reached.  My old Mac ID was showing and it was signed up for the cloud at a fee of $24.00.  The same MacBook but with a new hard drive had a new ID and I can not restore any of my pics or ITunes music.  Am I missing a step or can I rename my Mac so it will match my old ID?  If I rename it can I download my old info off of ITunes?? Thanks

    I'm not following much of the question and for me it would help to get some terms straight. You only "log into" the iTunes Store (online).  What account was this and what limit??
    Old Mac ID?  Your AppleID is what you use to log into the store. It does not change with computers.  You always use the same one, perhaps updating the email address from time to time.
    By the cloud do you mean iTunes Match?
    Sure, your computer hard drive has a new name (you can rename it -- my series of drives have kept the same name for 23 years now).  That doesn't affect logging into the Store. Start up iTunes, log into the Store using your same Apple ID, download available past purchases, and if you have the Match service download your other music too.   You may have to authorize the computer again.  I don't know which part of the computer is used for authentication and if that got lost with the old drive.

  • My Time Capsule does not recognize internet after DSL problem. I can hard wire my computer but cannot get TC to do wireless.  How do I reset?  I have unplugged for a reboot but the amber light is flashing.

    I had a problem with DSL service provider.  They have corrected their problem but now, I can only hard wire into my desktop for internet access.  If I plug in through the Time Capsule, I get no wireless service.  I unplugged the Time Capule and rebooted but now the amber light is blinking tellimg me that it cannot access internet.  So, I have hard wired back to my Mac and need to know how to get the Time Capsue to recognize the internet when I plug into it.

    Start with a factory reset and do setup over again.
    If the DSL modem is working as router.. which will be the case for most people then the TC must be in bridge mode..
    The Factory Reset.
    Power down the TC.
    Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
    (I fix TC and have several reset levers bent over and jammed or broken off).
    Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
    Keep holding in reset for about 10sec until the front LED flashes rapidly.
    Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.

  • HT3529 iPad does not delete a certain message received,but I can delete others

    Received an email from a country outside of USA,and can not delete the message. Also, when tapping the mail icon, it displays "no email selected"

    Try the '''''reset''''' described here: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

  • I've saved a 2 gigabite Photoshop  file (an illustration) to my desktop but when I dble-click on it , while Photoshop opens, the image does not.  It is still there  but how can I access it?

    AFter saving a very large file in photoshop Icant seem to call it up. DbLe clicking on the icon opens Photoshop but there is no evidence of the image. I have also triedaccessing it through the pull down menu in Photoshop and again, I can select it but it never appears. It's as though it is hidden somehow.

    Are you seeing anything in the layers panel when you open it?
    Can you open it in any other image editor or viewer?  2 GB is the upper limit for a psd. Maybe you should convert to tiff file format.
    Photoshop > File > Scripts > Image Processor will do this for you.
    Gene

  • Windows says "device is not functioning" and "Windows does not recognize"

    I lost my USB dock connector cable for my ipod. I just went out today and bought a brand new "Cygnett GrooveLink Strech Retractable USB Cable for iPod". I was pumped when I came home to finally be able to add music to my ipod again, but alas when I plug the iPod in, Windows pops up saying that the device is not functional and that Windows does not recognize it. I tried everything from rebooting the iPod to re-downloading iTunes and iPod updater. After searching this site for the past few hours, I figured I'd try and possibly find some real answers here. Please Help!!

    Hey everyone,
    I had the same problems all of you are having. I
    just got a 5th generation video ipod. For a few
    days, my computer a) wouldn't recognize it; b) froze
    up when I connected it; c) mistook it for a mass
    storage device ("drive E"). I bought a USB 2.0
    notebook card which didn't work either and actually
    seemed to make the problem worse because when I
    connected the iPod to it my computer froze up.
    I was very confused because my new iPod worked on my
    brother's computer--which is much older than mine but
    still recognized the iPod and connected to it.
    Then I noticed that my brother's computer is running
    an older version of the ipod software. I used his
    disk to install "Ipod Updater 2005-06-26" rather than
    the new version of the software on the Apple Web
    site. Then I plugged my iPod into a USB 1.1 port.
    To my surprise, my computer finally recognized the
    iPod and is now loading music onto it. I cannot
    believe this worked. I wonder if the latest version
    of the software is faulty in some way.
    Try it! I hope it will work for you too. You will
    need an older version of the iPod updater software,
    so borrow it from a friend with an older ipod.
    I am having this problem also...It will work fine on the 1.1 but when i plug it into the 2.0 it has trouble recognizing it...

  • I tunes does not recognize i touch after trying to upgrade software

    My itouch was working fine until an error occured while trying to upgrade the software. Now, when i plug it in it just shows me a picture telling me to connect to itunes, and i tunes does not recognize my ipod as being connected. i can not get the ipod to even go into the main menu

    Of course iTunes won't recognize an iTouch. That's not an apple iPod. Are you thinking of the iPod touch?
    Hah, I'm just kidding. For your issue here, I suggest a few things
    -Restart your computer
    -Make sure you have the latest version of iTunes by going to 'help' and then 'check for updates
    -Try another USB cord
    -Try another USB port and make sure your USB drivers are installed correctly and up to date (http://support.apple.com/kb/TS1538)
    -Restart the Apple Mobile Device Service (http://support.apple.com/kb/TS1567)
    -Uninstall iTunes and reinstall (http://support.apple.com/kb/HT1925)
    Those steps should fix everything up for you but if they don't, be sure to try it on a different computer.
    Hope I helped
    Becca

  • "Could not complete your request because Photoshop does not recognize this type of file."

    I am using the latest version of Photoshop CC. When I attempt to open a recent .psd file listed in the Open Recent list, I get the message "Could not complete your request because Photoshop does not recognize this type of file." I can use the open command to open these files with no problem. The files are not damaged or missing the .psd extension and open normally except when using the Open Recent menu. OS is Mac 10.8.5. Thanks for any clues as to a fix.

    As weid as it may sound: simply don't use "Open recent...". Use Bridge to manage, find and start them in PS.

  • Computer does not recognize ipod after update

    I updated my Ipod touch, now my computer does not recognize it. I want to resolve this problem without having todelete  my Itunes Library, for I have music that I no longer have m the CD's.
    Please Help
    Tank you

    IIIaass, the ipod charges when connected to the computer, and it is working, i have donwloaded some apps, and set it up because it got restored to the original setting, once I update it. I do get an erro message (itunes could not connect to this ipod. An unknown error occurred (0xE800000A) )it doesn't even show as a camera in the drive of the computer. If you can help, I would appreciate it.

  • After recent update my ipad will not recognize my laptop in other devices

    After the most recent update, my ipad and iphone does not recognize my laptop in other devices.  I have uninstalled and reinstalled itunes and also updated itunes and nothing seems to work.  Any suggestions would be greatly appreciated.

    Solved my own problem     Uninstalled google chrome on both iOs devices and reinstalled and it's as good as new.  Thanks for your help Ralph!

  • I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. Please help

    I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. There's only a few things that could be my passcode, but because it disables for an hour, it is time consuming trying to figure it out. What do I do? I do not care about having to erase everything since it's new and there's nothing on it, but it was never synced with iTunes.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Maybe you are looking for

  • URGENT project settings to use when creating broadcast quality television

    Hi, What project settings do I use to create broadcast quality television in a widescreen format. Note I use a mac book and also I'm in NZ so we use PAL. I'm only using animation and still pictures so haven't got any video to import. I work for a cha

  • Objects in MSO refuse to link to articles

    Hi there, I realize this is a pretty insignificant problem compared to the complexity I'm reading about here in this forum  - but I'm new to this...and really could use some help.  This was not a problem with the other app I built - but I have not be

  • Update multiple fields using select query efficiently – 9i

    I need to populate a table called prop_charact used for synching data to a legacy system. Prop_charact has fields that are found in a few other tables (no one field is found in more than one table outside of prop_charact). I want to pull the data fro

  • Is there any way to find out where a standard text is used?

    Is there any way to find out where a standard text is used? We can see the text from SO10, but i want to find out where it is used.

  • Scroll Direction: Natural Problem

    On my macbook pro 13-inch mid 2010 I install Lion and from the beginning doesn't work the natural scroll with two fingers.I check system preferences in the box scroll direction natural. All others gestures works perfectly, only scroll direction doesn