My Apple TV forgets my home network and needs to be unplugged to reset it. how can i fix?

After a day or 2 of non use, i need to reset the module by unplugging and restarting it. it then will connect to Wi-Fi without re entering username and password. is anybody else having this problem or how can i fix it

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.

Similar Messages

HT1339 Hi i recently bought an ipod touch 5th generation from a friend of mine i successfully restored it but when i tried to set it up it says that it is linked to an apple id already. my friend moved and i have no way to contact her how can i fix this?p

hello i recently bought an ipod 5g from a friend i had just met, I took the ipod home and factory reset it, but when i try to sign in is says i have to sign into the account that was used to set it up. i have no way to contact her because she moved to arizona to live with her grandparents . i have no way to get the email or password i need help.!!!!!!!!!!!!!!!!!! someone please.!!!!!!!!!!

Wipe it clean and restore it. You should then be able to rename the iPod and set up an account with iTunes. I hope this helps!

FAX through HP laser jet 3050 which is connected on a Windows Network. I m also connected to this Network and i print through HP LJ 3050. How can i sent fax through HP LJ 3050?

HOW can i sent FAX through HP laser jet 3050 which is connected on a Windows Network.
I m also connected to this Network and i print through HP LJ 3050. How can i sent fax through HP LJ 3050?

Welcome to Apple Support Communities.
Apparently there is no HP software support for the HP 3050 fax or scan functions with OS X 'Lion' 10.7:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02950970 #A1
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c0292511 4
Alternatives?
1) Run a Windows client on the Mac using Boot Camp or one of the available virtualization programs like Parallels, VMware Fusion, and others so you can run the latest Windows print/fax/scan driver.
2) If your Mac hardware supports an older OS X version, downgrade to one (Snow Leopard?) that still had support for print, fax and scan.
3) Buy a newer printer. A 2007 model is 5+ years old, and should now be fully depreciated in a business.

My iPad Air will not recognize my newest Apple ID e-mail address for cloud access. It continually reverts back to an old e-mail address that I no longer have access to and don't remember the PW for. How can I fix this?

My iPad Air will not recognize my newest Apple ID e-mail address for cloud access. It continually reverts back to an old e-mail address that I no longer have access to and don't remember the PW for. How can I fix this?

Didn't work but thx
Mark Flohr
[email protected]
949-636-3069

I have iPhone 4 and updated to iOS 6, after the update what's app asked I give it permission to acces my photos and I pressed no and now I cannot send pics and cannot see profile pix of my friends how can I fix it?! Thx

I have iPhone 4 and updated to iOS 6, after the update what's app asked If i give it permission to acces my photos and I pressed no and now I cannot send pics and cannot see profile pix of my friends how can I fix it?! Thx

Hi yanylove,
If you are having WiFi issues after upgrading to iOS 7, you may find the following article helpful:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Regards,
- Brenden

Hi guys, my iPhone 4S (ios 7.0.2) can't connect wi-fi. I've already reseted Network Settings, but Wi-fi still doesn't work. how can I fix it? thank you!

hi guys, my iPhone 4S (ios 7.0.2) can't connect wi-fi. I've already reseted Network Settings, but Wi-fi still doesn't work. how can I fix it? thank you!

Thank you!
doesn't like one at Starbucks or McDonald's...
I can not activate or deactivate the Wi-fi button ... I don't know how I can explain... the wi-fi is always OFF.
I've reset the network settings and restored by itunes... but I'm still without wi-fi ...

I just downloaded ISO6 and now my music won't play. How can I fix this?

I just downloaded ISO6 and now my music won't play. How can I fix this?

Hi Jackson,
Since you have already done a restore of your iPhone, I would suggest that you now try restoring your iPhone to factory settings, set it up again and test before you restore your content. This article describes the process -
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Note - It is important that you follow this stop:
Use iTunes to back up your device and transfer and sync any additional content to your computer.
Thanks for using Apple Support Communities.
Best,
Brett L

I am on a intel Imac and need to update to 10.5. How can i do this?

I am on a intel Imac and need to update to 10.5. How can i do this?

You really should update to Snow Leopard because Leopard is no longer in production. The following tells you about Snow Leopard but also what's need to upgrade past Snow Leopard should you be able and wish to do so.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     Am I eligible for the free upgrade?
         See Apple - Free OS X Mountain Lion upgrade Program.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal
startup drive.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before installing the update
      unless you will boot from this drive and install the update on it. Reconnect it and turn
      it back on after installation is complete and you've restarted.
2. You may experience unexpected results if you have installed third-party system
       software modifications, or if you have modified the operating system through
       other means. (This does not apply to normal application software installation.)
3. The installation process should not be interrupted. If a power outage or other
      interruption occurs during installation, use the standalone installer (see below)
      from Apple Downloads to update. While the installation is in progress do not use
      the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
      1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple
          logo appears.
      5. Wait for installer to finish loading.
      6. Follow instructions.
E. If updating:
1. Download and install update(s)
2. Use Software Update, or
3. Download standalone updater(s).

I have An iphone 5... And when I take a picture it appear on the photo app on the middle of the screen and not on the whole screen.. How can I fix it?

I have An iphone 5... And when I take a picture it appear on the photo app on the middle of the screen and not on the whole screen.. How can I fix it?

Definitlely have it looked at. That could be a hardware deffect on the maker(apple) so there could be a definite replacement option.

I'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

i'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

There isn't a way directly in Mail.
Here's what google says: http://www.google.com/search?client=safari&rls=en&q=mac+os+x+mail+delayed+send&i e=UTF-8&oe=UTF-8

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

Phone is frozen in a middle of a call and my top restart button do not work, how can i fix this

phone is frozen in a middle of a call and my top restart button do not work, how can i fix it

Bummer.
Without having the top button, you couldn't do a hard reset.
I'd say you might be looking at backing up and restoring through iTunes unfortunatley.

Every time I try to sign on it says that ichat lost the connection to the AIM account and the server connection was unexpectedly lost. How can I fix this?

Every time I try to sign on it says that ichat lost the connection to the AIM account and the server connection was unexpectedly lost. How can I fix this?

Note For others.
For the Port Changes (or server names in some cases) you have to be logged out to make changes on the Server Settings pane.
9:41 PM Friday; October 28, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I'm trying to log into my creative cloud, it accepts my log in info and says I've been logged out. How can I fix this?

I'm trying to log into my creative cloud, it accepts my log in info and says I've been logged out. How can I fix this?

Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
And, just in case you ever have this problem...
BLANK Cloud Screen http://forums.adobe.com/message/5484303
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

I upgraded my Window 8.1 and could not access to iTunes Store. How can I fix it?

I upgraded my Window 8.1 and could not access to iTunes Store. How can I fix it?

I have the same problem. ITunes boots up just fine, I can access all my stuff, but when I click on the ITunes store, all my computer says it that iTunes has stopped working- and that Windows will notify me if a solution is available. I have uninstalled and reinstalled, and also run computer diagnostics and compatibility tests between my computer and iTunes. It give me no error code at all.
I've tried to get into the store through menu options as well- like trying to access my account- but anything that has to do with accessing the store shuts the whole program down.

My Apple TV forgets my home network and needs to be unplugged to reset it. how can i fix?

Similar Messages

Maybe you are looking for