My Apple TV Gen 1 just doesn't work
Hello,
I have setup/reset/setup this device so many times it just drives me crazy. I honestly believe that this technology just doesn't work.
I have an iMac running the most up to date version of OS X 10.6.5, I have the latest version of iTunes, 10.1.1. I'm using the Airport Extreme.
I have followed the directions to the letter!
Please help!
Thanks,
Aloha
John
I have a number of movies, etc on my pc but to make things easier, i just opted to a custom sync, display only those items i have selected, and chose 3 movies only.
I can see them on my tv, but when i select play, i always get an error indicating that this device is not authorized to play the content. I have deauthorized/authorized my pc many times.
I'm thinking about just dumping all my apple products and just stick with a microsoft based pc.
I am having the SAME issue. Just bought the Apple TV 1st Gen. from AppleStore, then followed the instructions to the letter. I am using iMac 10.5.8, Airport Extreme Base Station, AppleTV, and I have the most up-to-date iTunes and also made sure AppleTV is up to date. I get the same stupid error messages indicating the device is not authorized. Called Apple (no)Support, and was walked through restarting all my devices (like I didn't already try this, but just to make 'em happy, did it again...), didn't resolve the issue. "Steve" was like "...hmm, that shouldn't be doing that..." Really, dude? Maybe that's why I called you. Thanks for your time. Hope you guys enjoy my money I gave you.
Anyone have any ideas? I am about to pack this thing up and send it back. When I purchase ALL Apple products that are advertised as being able to just plug and go, it should freakin' work.
Similar Messages
-
Time Machine Just Doesn't Work Anymore
I was a happy Time Machine (with Time Capsule) user for months. But it just doesn't work anymore. It takes longer than an hour to do every hourly backup so it is backing up 24 hours a day. It finds hundreds of thousands of files changed every hour and tries to back them up. Finders says only tens of files have been modified all of today. I have tried rebuilding my spotlight indexes, repairing my Time Capsule with Disk Utility and starting over with a brand new backup. But it just backs up hundreds of thousands of files every hour. So I am turning off Time capsule since it is clearly broken. If anyone has any suggestions at all I would welcome them.
Marcia,
Consider the following, it might give you some ideas:
Time Machine performs backups at the file level. If a single bit in a large file is changed, the WHOLE file is backed up again. This is a problem for programs that save data to monolithic virtual disk files that are modified frequently. These include Parallels, VMware Fusion, Aperture vaults, or the databases that Entourage and Thunderbird create. These should be excluded from backup using the Time Machine Preference Exclusion list. You will, however, need to backup these files manually to another external disk.
One poster observed regarding Photoshop: “If you find yourself working with large files, you may discover that TM is suddenly backing up your scratch disk's temp files. This is useless, find out how to exclude these (I'm not actually sure here). Alternatively, turn off TM whilst you work in Photoshop.” (http://discussions.apple.com/thread.jspa?threadID=1209412)
If you do a lot of movie editing, unless these files are excluded, expect Time Machine to treat revised versions of a single movie as entirely new files.
If you frequently download software or video files that you only expect to keep for a short time, consider excluding the folder these are stored in from Time Machine backups.
If you have recently created a new disk image or burned a DVD, Time Machine will target these files for backup unless they are deleted or excluded from backup.
Installing new software, upgrading existing software, or updating Mac OS X system software can created major changes in the structure of your directories. Time Machine will backup every file that has changed since the installation.
Files or folders that are simply moved or renamed are counted as NEW files or folders. If you rename any file or folder, Time Machine will back up the ENTIRE file or folder again no matter how big or small it is.
George Schreyer describes this behavior: “If you should want to do some massive rearrangement of your disk, Time Machine will interpret the rearranged files as new files and back them up again in their new locations. Just renaming a folder will cause this to happen. This is OK if you've got lots of room on your backup disk. Eventually, Time Machine will thin those backups and the space consumed will be recovered. However, if you really want recover the space in the backup volume immediately, you can. To do this, bring a Finder window to the front and then click the Time Machine icon on the dock. This will activate the Time Machine user interface. Navigate back in time to where the old stuff exists and select it. Then pull down the "action" menu (the gear thing) and select "delete all backups" and the older stuff vanishes.” (http://www.girr.org/mac_stuff/backups.html)
*TechTool Pro Directory Protection*
This disk utility feature creates backup copies of your system directories. Obviously these directories are changing all the time. So, depending on how it is configured, these backup files will be changing as well which is interpreted by Time Machine as new data to backup. Excluding the folder these backups are stored in will eliminate this effect.
*Backups WAY Too Large*
If an initial full backup or subsequent incremental backup is tens or hundreds of Gigs larger than expected, check to see that all unwanted external hard disks are still excluded from Time Machine backups.
This includes the Time Machine backup drive ITSELF. Normally, Time Machine is set to exclude itself by default. But on rare occasions it can forget. When your backup begins, Time Machine mounts the backup on your desktop. (For Time Capsule users it appears as a white drive icon labeled something like “Backup of (your computer)”.) If, while it is mounted, it does not show up in the Time Machine Prefs “Do not back up” list, then Time Machine will attempt to back ITSELF up. If it is not listed while the drive is mounted, then you need to add it to the list.
*FileVault / Boot Camp / iDisk Syncing*
Note: Leopard has changed the way it deals with FileVault disk images, so it is not necessary to exclude your Home folder if you have FileVault activated. Additionally, Time Machine ignores Boot Camp partitions as the manner in which they are formatted is incompatible. Finally, if you have your iDisk Synced to your desktop, it is not necessary to exclude the disk image file it creates as that has been changed to a sparsebundle as well in Leopard.
Let us know if any of this helps.
Cheers! -
Is there a way to fix an iPod touch 4G home button that isn't stuck but just doesn't work?
A couple weeks ago my home button got stuck. To fix it I found this video http://www.youtube.com/watch?v=yBfhCmq9VkA&list=WL429346A18D0B1E65 to help me out. The second option of using the charger ended up working, thus making the button work again. It was working fine after doing that but then it got stuck down again and I had to put the charger in and do that again. However, all of a sudden the home button just doesn't work anymore. It's not even stuck all the way down. I can press it repeatedly but still nothing.
I've had the iPod for about 6 months now and got it off of amazon refurbished so warranty is out of the question i'm sure. If it really is broken with no way to fix it then that's fine as i've been using assitive touch for weeks now and am used to it since i've been using it egulary since there's no other way. I just wanted to ask and make sure first before anything else though.Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PLEASE HELP!!
Hi jim1287,po
Check for the latest updates. Installing latest updates should resolve this problem.
Also, try to ran disk repair using safe mode in Mac, for instructions please visit: http://support.apple.com/kb/PH14204
Try enabling root user profile on mac and try to check. OS X Mavericks: Enable and disable the root user
Regards,
Ajlan Huda. -
ISight just doesn't work on Windows 7 64Bits
I'm a new MacBook Pro user for a few days. I was attracted by the design of MacBook and knew I could install Windows on it, so after shopping for some time, I decided to get MBP 13". I got Windows 7 64Bits installed yesterdat; all the drivers are installed as well. I went to Control Panel\System, and I saw "Built-in iSight" listed. However, the camera device just doesn't work. In Control Panel, I didn't see the "Imaging and Scanning" icon. I tried to uninstall and reinstall the driver and no luck. I'm already using the latest Boot Camp, and I just don't know what to do now. I really need the camera working. Can someone help?
Does this help? http://discussions.apple.com/message.jspa?messageID=11953256#11953256
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
STP just doesn't work as advertised
So here's my question:
Is anyone out there using this app having the amount of misery I'm having? Does STP seem half baked at this point of its development? It certainly does to me.
I sincerely hope Apple is planning a major update to STP real soon, because frankly, (IMHO) this app just doesn't work as advertised. I am now giving up trying to mix 9 episodes of a show because I can no longer work around the litany of bugs in this program.
This is a major disappointment, and I hope the product manager for STP is listening and moving forward to take corrective action ASAP.Hello Todd,
Where do I begin? Well, let me preface by saying that I feel like I've given STP a fair shot at the show I'm working on (six weeks now). But almost everytime I run into a problem and present it to knowledgable STP users, they reply with "Uh, yeah, I think they know about that one - hopefully there'll be a fix soon".
But here goes with a small sample of bugs - and features that SHOULD be in this app. If you can solve any of these issues, I'd be appreciate it!
- STP will refuse to save a file in the waveform editor if the ORIGINAL filename contains certain (illegal?) characters. Even if you change the name of the file TO BE SAVED to something which "should" work fine, it still won't save. I spent many days tracking this one down because STP gives you no indication as to why it won't save the file.
- STP will not allow you to perform FADES to/from silence in a MULTI-TRACK project (it will allow this in the waveform editor). This forces you to create keyframes on the VOLUME envelope (which requires numerous mouse clicks) to achieve the desired result.
- Sometimes, all the faders and pan controls on the MIXER go grey, preventing any adjustment. The only work around is to recall a user layout (again, took a few days to figure this one out).
- STP will not RELIABLY playback REALTIME EFX on tracks or busses. Often, EFX are simply skipped over (not played back), or they playback incorrectly.
- The ON/OFF parameter of EFX cannot be mapped to AUTO (keyframe) envelope. This is a real pain because you may want to simply turn an effect ON or OFF based on time, without having to adjust other parameters of the effect to achieve the same result.
- STP offers no easy way to navigate (SNAP) to the HEAD or TAIL of a clip on the timeline from the keyboard. The SNAP feature via the mouse is useless in this regard unless your zoomed all the way in.
- STP offers no way to move clips in the TL in user designated increments.
- When applying keyframes to a clip (for volume or pan as an example), STP requires that you manually add keyframes to the beginning and end of the clip - which takes way too long. There should be a way to highlight a clip(s) and with one keystroke, have it add keyframes to the HEAD and TAIL of every clip that was highlighted.
- STP will sometimes report that it cannot playback all the tracks because of bandwidth issues, even when you've got a RAID that will support uncompressed HD/1080i bandwidth.
- STP's screen refresh is agonizingly slow compared to Protools (for example), even when Protools is running on a MUCH slower CPU with far less RAM. Expanding/contract the timeline or tracks is "steppy" and slow.
- STP will not warn you if you're overwriting a clip when dragging from the browser. For example, if you have a clip on TRACK1, and you drag a sound effect from the browser to TRACK1, but it's length is so long that it will overwrite clips that may be out of your view, you have no idea that those clips are now gone or truncated. STP should warn you, and/or allow you hold down a modifier key that forces the clip to fit into the available empty space only.
- STP offers no way to easily copy an effect from one track to another from the mixer. Why can't I click and drag an effect from one fader to another to copy the effect with it's current settings?
- Where are the user adjustments for metering ballistics? Reference levels?
That's it for now!
All the best. -
Brand New everything but just doesn't work as it should
Hello,
Just bought a £2000 HP Elitebook 2.8Ghz with 3gb ram, XP, and a lot a bells and whistles. Installed CS4 production Premium and then the updates for Premiere, Encore, Photoshop and Soundbooth.
Started a new project, connected my Panasonic HVX200 to import DVCPROHD 1080i50 footage - simple you would think.
Wont do it, locks up everytime.
Now I started using Premiere on version 5.1 many years ago but stopped using it on version 6 after getting sick of its crashing and instability.
I went over to FCP and it was a breath of fresh air to say the least.
When Premiere Pro first came out, I tested it on a brand new laptop, crashed within the first minute and that was the end of that !
After 5 years on virtually flawless FCP use I thought I'd try out Premiere again and guess what, nothings changed, it just doesn't work as it should.
How anyone on these forums makes any money from it and keeps their sanity is beyond me.They must have corrected this oversight. I tried it out with the following TXT file, and indeed it no longer worked:
There is no egg in eggplant nor ham in hamburger; neither apple nor pine in pineapple. English muffins weren't invented in England nor French fries in France. Sweetmeats are candies while sweetbreads, which aren't sweet, are meat. Quicksand works slowly, boxing rings are square and a guinea pig is neither from Guinea nor is it a pig. Why is it that writers write but fingers don't fing, grocers don't groce and hammers don't ham?
If the plural of tooth is teeth, why isn't the plural of booth beeth? One goose, 2 geese. So one moose, 2 meese? Doesn't it seem crazy that you can make amends but not one amend. If you have a bunch of odds and ends and get rid of all but one of them, what do you call the thing left? Is it an odd, or an end?
If teachers taught, why didn't preachers praught? If a vegetarian eats vegetables, what does a humanitarian eat? In what language do people recite at a play and play at a recital? Ship by truck and send cargo by ship? Have noses that run and feet that smell?
How can a slim chance and a fat chance be the same, while a wise man and a wise guy are opposites? You have to marvel at the unique lunacy of a language in which your house can burn up as it burns down, in which you fill in a form by filling it out and in which an alarm goes off by going on.
English was invented by people, not computers, and it reflects the creativity of the human race, which, of course, is not a race at all. That is why, when the stars are out, they are visible, but when the lights are out, they are invisible.
What a pity. I just hope that the queueing is taking less time than in the past. I will look at your info ASAP and report back. -
L2TP on Cisco ASA 5505, just doesn't work??!
This is pretty urgent, client expects me to have this up by lunch today
So, there is this Cisco ASA 5505 ver 8.4.
Most things work but now I want to setup a vpn connection...
I have done this 2 ways, first by using the "VPN Wizard" in ASDM and then 5 hours later removing everything and configuring from cli.
And it just doesn't work, client (WinXP & Win7) gets "error 792" and sometimes "error 789" (both indicating problem with phase 1, I'm pretty sure of that)
Googling on those gives a few suggestions none works.
All I get in the log on Cisco is the "Error processing payload: Payload ID: 1"
Googling on that only comes up with a few pages telling me this message is caused by an error. (Yeah, I could never have guessed...)
For the cli config, I followed this tutorial carefully (3 times actually...)
http://www.cisco.com/en/US/docs/secu...html#wp1117464
I'm using PSK for IPSec, entered same on Cisco and client - checked several times, this is not a password/PSK issue.
Ports opened on Cisco: 500, 1701, 4500
(For a try I opened all ports, no change.)
And here's the "show run":
Code:
ASA Version 8.4(2)
hostname ciscoasa
enable password <string> encrypted
passwd <string> encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
switchport access vlan 7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.5.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address #.#.#.# 255.255.255.252
interface Vlan7
description VLAN till kontor
no forward interface Vlan2
nameif kontor
security-level 100
ip address 172.16.5.1 255.255.255.0
ftp mode passive
clock timezone GMT 0
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Webserver
host 192.168.5.2
object network Webserver443
host 192.168.5.2
object network rdp
host 192.168.5.2
object network vpnserver
host 192.168.5.2
object service vpn-service-group
object network VPN
host 192.168.5.2
object-group service Webports tcp-udp
description Portar för webbserver
port-object eq 443
port-object eq www
object-group service DM_INLINE_TCP_1 tcp
group-object Webports
port-object eq www
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group service VPNports tcp-udp
port-object eq 1701
port-object eq 4500
port-object eq 500
object-group service RDP tcp-udp
port-object eq 3389
object-group service vpn-services tcp-udp
port-object eq 1701
port-object eq 500
access-list outside_access_in extended permit tcp any object Webserver eq www
access-list outside_access_in_1 extended permit tcp any object Webserver object-group DM_INLINE_TCP_1
access-list outside_access_in_1 remark Ãppnar för vpn
access-list outside_access_in_1 extended permit object-group TCPUDP any any object-group VPNports
access-list outside_access_in_1 extended permit object-group TCPUDP any any object-group RDP
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu kontor 1500
ip local pool vpn1 10.10.10.10-10.10.10.50 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
object network obj_any
nat (inside,outside) dynamic interface
object network Webserver
nat (inside,outside) static interface service tcp www www
object network Webserver443
nat (inside,outside) static interface service tcp https https
object network rdp
nat (inside,outside) static interface service tcp 3389 3389
access-group outside_access_in_1 in interface outside
route outside 0.0.0.0 0.0.0.0 79.142.243.33 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authorization command LOCAL
aaa authorization exec LOCAL
http server enable
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA mode transport
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec ikev2 ipsec-proposal 3DES-SHA
protocol esp encryption aes-256 aes-192 aes 3des
protocol esp integrity sha-1 md5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal 3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
subject-name CN=ciscoasa
proxy-ldc-issuer
crl configure
crypto ca certificate chain ASDM_TrustPoint0
.... (sorry, not giving you the cert...)
crypto ikev2 policy 1
encryption 3des
integrity sha
group 2 1
prf sha
lifetime seconds 86400
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash md5
group 1
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 1
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 1
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh scopy enable
ssh 0.0.0.0 0.0.0.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 10
console timeout 0
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
l2tp tunnel hello 100
dhcpd dns 8.8.8.8
dhcpd auto_config outside
dhcpd address 192.168.5.11-192.168.5.36 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec
address-pools value vpn1
group-policy DfltGrpPolicy attributes
dns-server value 79.142.240.10
vpn-tunnel-protocol l2tp-ipsec
address-pools value vpn1
username test password <string> nt-encrypted
username someoneelse password <string> nt-encrypted privilege 15
username someoneelse attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec
service-type admin
username someone password <string> nt-encrypted privilege 0
tunnel-group DefaultRAGroup general-attributes
authorization-server-group LOCAL
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group vpn1 type remote-access
tunnel-group vpn1 ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:dd92aa6707dc63e8ed7dad47cfecdd47
: end
In Pingvino Veritas!I lmost got it working now, new problem is that the connection is immediately ended.
Logs shows that client is authenticated and assigned an ip.
From the logs, all happens during one second:
IPAA: Client assigned ip-address from local pool
IPAA: Local pool request succeeded for tunnel-group
IPAA: Freeing local pool address
L2TP Tunnel created, tunnel_id is 24
L2TP Tunnel deleted, tunnel_id =24
IPSEC: An outbound remote access SA has been deleted
IPSEC: An inbound remote access SA has been deleted
Session is being torn down. Reason: L2TP initiated
Teardown UDP connection -
I have forgotten my password for mountain os. I have followed the instructions about going to "User group" and enetering my apple ID. It doesn't work. Can anyone help me? Thank you.
Welcome to the Apple Support Communities
https://discussions.apple.com/docs/DOC-4101 -
My external Apple USB Keyboard letters doesn't work, but the numbers do. Why and how can I fix this issue? Also, When I open the Keyboard Viewer, the letters will highlight only if I hold the modifier key(s) "Control" or "Control and Option". I really need help with this. I don't have any other computer to try it on, so I will have to test it on a friends computer sometime. But perhaps solutions that I can try right now? Thanks.
Hello there, IDuncan23.
The following Knowledge Base article has some great troubleshooting steps you can follow to work on resolving your keyboard issue:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Thanks for reaching Apple Support Communities.
Cheers,
Pedro D. -
I can't find any error in my vi but it just doesn't work please help
I'm trying to control a robot named cs-113 and I find someone has already achieved this. He wrote a vi called robot cs-113.vi and I just tried to write a same one but it just doesn't work. Can anyone tell me why it doesn't work? Thanks for your help!
由 normanshi 在 08-01-2006 04:11 AM 上編輯的訊息
Attachments:
robot-cs113.vi 79 KB
cs-113 test.vi 62 KBIt would really help if you were a little more specific about what isn't working. Also try debugging your application in highlighted execution with probes to find out exactly what data you're sending out the port.
Jarrod S.
National Instruments -
Server 2008 r2 setting up firewall rule that just doesn't work!
I have allocated static ip addresses to a group of PCs, then gone to Server 2008 r2 and gone to Windows firewall with advanced security and written a new custom rule. Am blocking internet explorer, have browsed to where it is lodged on PCs, added the ip
addresses for blocking, in fact followed a detailed set of instructions but it just doesn't work! I am at a loss as to why, can anyone help please, driving me mad now! Thanks.Are you applying ADV firewall rules through GPO. If not then you need to create block rules on the clients i think. but I would create a block rule in GPO and link to these PC's OU.
-
Am unable to transfer/sync my "Notes" data from iPhone 6 to my MacAir and MacMini PC. Just doesn't work. Please advise.
regards / krishnakumar
Cochin/IndiaThere may be other ways, but the best way I've found is:
Set up an iCloud email account so that you can use the Notes part of this service. Note that I said "iCloud email" not "iCloud" ... you need to enable the email service of iCloud in order to get the iCloud Notes feature. Otherwise, the "Notes" app on your device will only store notes on your device, or maybe sync them with some other email account (e.g. Gmail, Yahoo ... but does so poorly IMO).
On your Macs, set up the same iCloud account as on your iPhone. Now that you've set up the email part of iCloud, you can enable the Notes feature of iCloud on your Macs.
Be sure to set iCloud as the default account to store your notes, in case you have other email services with a Notes feature.
New notes that you create on any device will sync to each other.
Notes that you created before doing all this cannot sync to your Macs, since the notes were not in iCloud. Just turning on iCloud Notes does not cause them to enter iCloud and sync -- you'd have to copy and paste them into a new note, after ensuring that iCloud is the default account for any new notes. -
Livid with Apple - It just doesn't work. EVER
Hi Guys,
As the title suggests I am beyond aggrevated with Apple. But in the interest of healthy blood pressure and actually solving the problem; I will now continue with the problem at hand.
I have through the years provided support for clients who own Apples, and I have through many years of frustration (due to illogical, broken and unnecessary Apple software functions) and oh so many forum visits solved their problems to their satisfaction.
This one takes the cake however.
My client recently broke the glass of his iPad (64Gig) and is now unable to navigate around. He did however buy an ipad mini(16Gig) for his son afterwards and now wants all the kiddie apps loaded onto his sons. I proposed that we perform a backup of his iPad in iTunes and then just restore to the iPad mini as some of his apps was bought in Mauritius and are nor available here for purchase.
First problem:
We can't restore the backup (45gig of which 30 gigs are pictures) because the iPad mini has too little space. No problem (or so I thought), let's just delete his photos after I manually backed them up. It turns out we cant delete the photos on his iPad (syncing doesnt work, nor can we manually remove them) because iTunes (he is running 10.6.8 and cannot upgrade further) doesn't provide the function of deleting things, and like I just said the syncing doesn't work. This after trying EVERY solution and workaround presented in the forums.
Second Problem:
This would all have been easily solved if we could just do a memory upgrade on the mini. But Apple has seen fit to force their clients to go out and buy BRAND NEW iPad's if they want a small ram upgrade.
Third problem:
I tried the syncing seperately via iPhoto and guess what? After about 4 hours of waiting around for it to syncronize it did Jack Diddly Squat.
Can anyone that maybe has had the same problem provide a solution?
For those PR agents out there who actually care, just make things simple. People WANT simple. I'm done with punting your low quality products though.you can import ALL those photos into iphoto. Then EXPORT them to a large capacity hard drive. Then sort through the photos and sync em to the other ipad.
When you export movies then make sure you choose ORIGINAL not JPEG. -
TS4001 iCloud bookmark syncing just doesn't work.
I've tried all of the disconnect, purge, wait and merge scenarios on on this and other web platforms and iCloud still keeps causing my bookmarks to revert to a long obsolete setup from weeks ago. It's clear I'm not the only one with the problem. Anyone have a better idea?
I've disconnected the Mac and all of the other devices. I've deleted every folder and file I can find (including the bookmarks.plist in "Library/Safari" many times. I've waited days. I've reconnected and "merged" with iCloud. I've deleted all bookmark files on all other devices. Results are still the same - surprise! A return to an old set up.
I'm a Mac fan. I'm an Apple fan. But this is really frustrating - its EXACTLY the kind of thing that Apple shouldn't do.
MobileMe worked fine. What's going on?
More importantly, what can I do to fix it once and for all?
Is there a way to get to the bookmarks info in the cloud and clean it out?
Is there a way to not "merge" but REPLACE the iCloud bookmark info?Yup.. I had less trouble getting SN to work with icloud than I did Lion.
I just popped into the other conversation to say you can indeed use icloud with SN, but you have to have a basic knowledge of how to do things. Unfortunately some people want so much hand holding they just can't be helped.
I was just trying to ensure everyone knew YOU CAN DO THIS. I didn't intend having to train everyone on the basics of computing and using OSX.
Just showing a screen shot isn't going to assist anyone. There's more to it.
I note one individual says "it doesn't work" when I know full well it does". Many have done this and the evidence is all over the web.
One other person is afraid to screw up her machine by attemptoing anything. Why not use Carbon Copy Cloner and totally clone to a spare disk and then experiment away with the knowledge that the entire system could be brought back as original... in little more than a couple of minutes.?? But no.. "I'm afraid". They can't learn this way. Again, hand holding.
So if people don't want to research, learn, understand. and try without fear.... then I can't help them.
Maybe you are looking for
-
How to fetch some certain records at a time
Hi everyone, I dont know how to fetch some records at a time, for some reason,there is not enouht memory.so I cant fethch all the records at a time. example, every time I only want to fetch 10 records. Does anyone know that? thanks Krussi
-
Error-3259 when sharing music on itunes 6.0.4.
I've searched everywhere to find a solution for this error with no answers. I've almost given up using itunes. I've purchased the powerbok G4 months ago and downloaded itunes 6.0.4 version. I don't know if this version is incompatible with the older
-
BAPI - Sales document - Copy control issues
Hi, I am creating a Credit memo referencing an invoice using the function "SD_SALESDOCUMENT_CREATE'. I get the invoice pricing details using RV_INVOICE_DOCUMENT_READ. Populate the inputs manually and pass those values to SD_SALESDOCUMENT_CREATE' with
-
Pacman - error: failed retrieving file
Hi. I just installed Arch on my new laptop but when I first got to the stage where you need to use pacman for the first time, I got this error: error: failed retrieving file for all the mirrors I have uncommented in my /etc/pacman.d/mirrorlist with r
-
Having received a fresh batch of NVidia MacBooks I've remade our default image and attempted to image the MacBooks. However once the imaging is completed they all boot in verbose mode. Other than this they operate perfectly. Our deployment script ble