My apple tv has always had issues on connecting to wifi. but now that iv'e updated the system, it wont connect to wifi at all. Id like to know what to do, and if its eligible to get a new one. the serial number is: DY5HNVP5DRHN
My apple tv has always had issues on connecting to wifi. but now that iv'e updated the system, it wont connect to wifi at all.
My connection is fine because Im using it on my macbook pro perfectly, so the problem is definetly on apple tv.
Id like to know what to do, and if its eligible to get a new one. the serial number is: DY5HNVP5DRHN
From what I understand from this post, yes you do qualify for a replacement.
http://www.macrumors.com/2013/04/15/apple-initiates-replacement-program-for-3rd- generation-apple-tvs-with-wifi-connectivity-issues/
Similar Messages
-
My laptop has crashed and I'm in between getting a new one but need to update my iOS on my iPad, is there anyway of doing this without a laptop or computer?
If you can't update via wifi, you can use a friend's computer, or an Apple store will do it for you.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 4: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom
PS When you get your new computer.
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
Message was edited by: Texas Mac Man -
I was able to text my friend to her number but now that I have updated my iPhone it shows that it's an iMessage when I text her to the same number, I know that with iMessages you have to turn on your Internet but I'm texting her to her same number so it shouldn't be an iMessage. Can someone please help?
Hi rennekamp3,
If your machine currentlty won't boot past a grey Apple screen, you may find the following article helpful:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Note: If you get to the portion on starting from the Install Disks or performing an Archive/Erase & Install, you'll notice this article has not yet been updated for the more recent operating systems. In that case, you may want to refer to the following article:
OS X: About OS X Recovery
http://support.apple.com/kb/ht4718
Regards,
- Brenden -
Hello guy, i have a problem when playing the FL commando which when i am playing the game , sudden the game is log out by itself. I would like to know what is the problem for my ipod 4g, just buy recently only and having ios 5.0.1
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I didn't think to make a copy of the message I got, and now it's not coming up. It just showed up on my screen twice when I opened Firefox today (10/28). So, for now at least, I don't have the specifics, but let me make this more general: I'd like to know what I'm getting any time I get a message from Firefox that there is something to add on to the software. I have only recently been using Firefox, and have gotten update messages several times.
By the way, Help > Troubleshooting Information opens a new tab.
Could you check whether you have the 16.0.2 update? You can look at Help > About Firefox for that.
If you get other messages, they could be generated by add-ons or web pages. It's good to be cautious about clicking! -
Has anyone had issues with their HP Lightscribe CD/DVD after a sofware update?
After recently installing software updates from HP and Microsoft my laptop no longer shows the drive with the CD/DVD under Computer. I can install a dvd and hit the Quick Play and it plays fine but it's also a lightscribe dvd burner and I can't send videos or photos to the drive because it's not showing up under the listed drives. Neither are my removable disk flash ports showing up. They were there before the most recent HP and Microsoft security updates installed. When I go to Device Management it shows up there but also shows an error message under the Devices Status: "This device cannot start. (Code 10), Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available." When I click to check for solutions I get the message back that the device is installed and functioning properly. I also checked the device driver and it's telling me it's the correct and most updated driver. i'm at a loss as I'm not at the point where I'm able to replace this laptop which is used for personal and home business use. Does anyone have a solution other than doing a total recovery? I tried taking it back to just before the last update but they're still not showing up. It's like something wiped them out.
Yes with some docks and car systems but I do not remember the specific devices. Sometimes and iOS update breaks compatibility.
Try:
- Go to the dock manufacturers and see what they say. Also see if there is a firmware available for the dock
- Reset the dock
- Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I geta message after attempting to sync with Itunes that says 3 items could not be synced. How do I know what these 3 items are? What should I do about this?
I updated to iOS 5.0.1 days ago and didn't receive that notification until just now...
This time I synced new photos I took yesterday, and it gave me the:
"iTunes Sync: 54 items could not be synced. See iTunes for more information"
Perhaps it kicks off when new items get synced.
I've decided to rent a movie yesterday. Once it gets deleted, I'm curious to see if it jumps to 55 items. -
My apple id has been disables, i have reset my password but now im lost, please help me :)
My apple id has been disabled, i have reset my password and turned my phone on and of but no joy....please help me
http://support.apple.com/kb/TS2446?viewlocale=en_US
-
Ok, I used to be able to open links up in a new Tab using my middle mouse button. However, I updated firefox with the automatic Updates on the 26th of October and now I no longer can open links with my middle mouse button. Why? I use this feature just about every time I go searching on the internet so I really would like it back. I couldn't find anything that it was related to in the options so I turn this over to you guys.
Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
It has a cracked screen also but that is not the issue. I am willing to live with the screen
Unfortunately, ANY signs of 'neglect or damage' automatically become the cause of any issues you're having. As in it doesn't matter if your screen was flickering before it was dropped, when they see the dent or cracked screen, that screen flicker was caused by the drop. Because they have no way to know if you are telling the truth (it's nothing personal, they just literally dont' know) so any signs of damage become the reason for your issue. The only way out of that is if you had taken in your iPad and, even if you didn't get it replaced, an apple employee can have documented that yes, that issue existed before the drop.
It's not fun, I know, but that's just how it is. Any signs of 'neglect or damage' and that 'neglect or damage' is the cause of your issues. -
How can I do a backup now if I can't even access this new device to update its iOS version? And if I just select the option of configuring it as a new Ipod so I can update it, will it still be possible for me to download the previous device's backup on it later? I'd hate to lose everything.
That error message means that your new iPod is not fully updated. Update the new iPod and then restore from the backup of your old iPod.
-
I bought an iphone 5 from one of my friends and unluckily I had yet lost his contact, I had update this iphone to IOs 7 and now it's be locked at iCloud because there was no password . Actually I dont know what I must do for its. Experts, please help me!
The friend who sold it to you needed to clear his Apple ID off the phone before he sold it to you. Of course if it wasn't his phone in the first place then he could not do so. He is your friend but you don't know where he is?
There is nothing that will help you short of getting the password for the Apple ID from your friend. If you cannot obtain that there is no workaround. -
I need a code for verifiing my emailadress. How do get a new one ?
Photoshop Elements 12
Share
Try to send email directly from Photoshop elements
The program ask for a code to verifiing my emailadress
I need a code for verifiing my emailadress. How do get a new one ?Check your email. The screen capture says that they sent one to the email address listed.
-
My computer's hardrive went bad an I had to get a new one. Now my computer has nothing on it and I had to reinstall itunes and i have no music or anything. So now I cannot sync my ipod or anything. Is there anything i can do to get all of my stuff back?
It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy to put everything back. -
I have had bad luck with electronics lately my computer got lost to water and cant be fixed now my Ipod has been stolen I reported it to Apple but now I need to know when I get a new one how can I get back my music and games etc. if I can get it just with my account
What kind of iPod are you getting to replace it? If it is an iPod Touch, and you are in the US, after you set up the Touch you can use the iCloud beta and download your previous music, books and app purchases directly to your Touch.
Maybe you are looking for
-
Issues with using relative links in Captivate 8
Is anyone else having issues with using relative links in Captivate 8? These links all used to work in the previous version of Captivate. And I could have sworn this was fixed already once in Captivate 8 but it's popping up again for us. Here is the
-
Brick Wall Problem: Array of Clusters, Size of array from reference
Good Morning Forums, I have hit a brick wall with my application and I am hoping somebody can help! I have an array of clusters of indeterminate size (the cluster is generic, data contained not relevant.). Inputs to the VI are: a reference to the arr
-
Does anybody has information when we can expect JDeveloper to support new J2SE 5.0 APIs
-
EAP-TLS Machine Authentication/Certificate
Hi, I'm having problems getting EAP-TLS to work when a client machine needs to connect to a WLAN. I can make each user get a user cert from my CA and if I use an admin account I can get windows to put these certs into the machine store, but when it
-
Slow performance after rebooting on my MBP 2,4ghz Penryn
I bought a penryn MBP in the summer 2008, and i had stable, and overall awesome performance. One day the fps in WoW dropped from stable 80fps to 15fps. And i paniced, i thought it was the classic "8600m GT" overheating issue. And i reinstalled MacOSX