My Apple TV is having problems with slideshows for photos synced from iTunes. How can I make it play thew whole slideshow without starting the loop again half way through?
My Apple TV randomly returns to the beginning in the middle of the slideshow for no reason. I don't habve the photos on shuffle
I started the slide show many times and somtimes it got through 20 photos, other times 50. Then all of a sudden, it goes back to the beginning and starts again. It's so frustrating as there is no reason for this and it doesn't loop back to the start on the same photo each time. I have about 350 photos in the album and they all loaded fine as thumbnails before I played the slideshow.
Can anyone help please?
Thanks, Adam
Have solved my own problem. My PC sits on the floor so I have a four-port USB hub on my desktop with one port in use. I use one of the other three ports for USB-related task. As I was shutting down for the night I had a - what turned out to be inspired - thought about whether there was an adequate power supply from the hub. I then tried the iPod USB connection directly into the front of my machine and everything worked. It seems that an inadequate power supply was the cause of this strange set of conditions.
Similar Messages
-
I'm having problems with my email account. I receive emails when I'm in a wifi zone. But if the wifi is turned off and i'm not in a zone I don't receive my emails through the cellular network. Only when I power off the phone and turn it back on, do I receive the emails through the cellualr network (again with the wifi off)
In your email settings on the phone check to make sure it is set to receive emails on cellular network. It's a feature you can turn off so your phone isn't constantly updating emails on the cell network, but if you are usually in a place with wifi and aren't concerned about going over your data allowance, you can turn it back on.
-
Having problem to enable my wifi setting from few days can any 1 help me???????????
having problem to enable my wifi setting from few days can any 1 help me???????????
Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help. -
I have an oder Ipod shuffle with many songs loaded on it. How can I transfer ths songs to a new computer since the old computer is no longer available?
I had the same problem with my iPad, i couldn't get the newer version of itunes because the computer was too old and my iPad couldnt sync with the old itunes. I got a PC from school a few months later so that solved the problem for me. Unfortunately i don't think there would be a program to put your music on your iPod, iTunes should be the only way to transfer files to Apple devices. What operating system are you running and what version of it is it?
-
i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
But... if the Device has been Modified... this will Not necessarily work. -
I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when I select the customer?
iselect the customer?Hi bazza,
We won't be able to put the address from a formula into the same cell that you enter the customer's name. We can put the address in the cell under the customers name.
First let's take James advice and concatenate the address in the address table.
Here is the formula in G2
=CONCATENATE(B2&"
",C2&"
",D2&"
",E2)
It shows this way because after I clicked on B2 and typed [&"] (no brackets) I typed option-return
This gives you your new line. Then I typed the closing ". I repeated this for the rest of the address.
Next we want to bring this to your order sheet. I prefer using the two formulas OFFSET and MATCH instead of VLOOKUP.
base tells OFFSETwhere to start counting from. Click A1.
row-offset is for the row. we will use MATCH() -1 to give us the row.
What MATCH does is give you the row number where something is found and you can specify an exact match. I usually construct the MATCH formula first and then cut and paste it into OFFSET. MATCH looks like this: MATCH(A2,Table 1::A,0). A2 is what we are looking for, Table 1A::A is where we are looking (the entire column A), and 0 means we want an exact match. Can you see it inside the OFFSET formula? Notice that we had to subtract 1 from its result.
column-offset tells OFFSET which column A=0 so we want 6.
we ignore "rows", "colomns" we don't need them.
If this seems like too much, just break it down into small pieces.
quinn -
The Apple Mail group my sent and received similar messages in my inbox, how can i disable this? I just want to see the messages i received, not the ones i sent!
Mail/Preferences/Composing. Do you have the CC myself box checked?
-
my iphone 4 has this same issue, did these steps but when it was doing the software update, half way through my phone still wouldn't move pass the apple logo. help!
Please see the two articles below:
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125 -
I got a new computer and I need to back up my iPod but it says it can only be with one iTunes how can I make it work
Yes. I have no personal experience with this, but it is possible to recover your music from an iPod. See this link: http://guides.macrumors.com/Recovering_Songs_from_an_iPod
-
HT201301 I am having problem with Iphone5, it's show me iTunes & not working
I am having a problem with my iPhone 5. It told to there was a system update. When I clicked it the screen showed me to plug it in to itunes however when going to itunes and updating it the phone won't turn on.
What happened when you contacted iTunes support as directed?
http://www.apple.com/support/itunes/contact/ -
Hi everyone ive put up a few posts as regards to my iphone, im still currently having problems with windows recognizing it the usb cord an the itunes logo appears on the phone along with the message on my computer USB Device not Recognized, One of the USB Devices attached to this computer has malfunctioned an Windows does not recognize it "Unknown Device Properties comes up an in the genral properties Device Status box says no drivers are currently installed for this device please help
Put the device in DFU mode (google it) and restore as new.
-
Am having problem with my iphone4s not syncing with my iPad
Am having problem with my iPhone 4s calendar events showing up on my iPad . Have turned calendar off & on in both devices, to no avail
On the iPhone, check Settings>Mail,Contacts,Calendars>Default Calendar. Here be sure you have selected the calendar listed under your iCloud account name as your default. If you haven't, change this, then enter a new event on the phone's calendar and see if it syncs to the iPad now.
-
Anyone having problems with art/animation/audio disappearing from the timeline after a save?
Hello,
I'm having problems with many files losing their assets from the timeline after a save and reopening the file in Mac OS X Snow Leopard. This is happens quite often now and there seems to be no pattern to it. For example, I will open an existing Flash animation complete with sound and artwork, make changes to the animation timing, test the SWF and everything looks good, then save. After reopening the exact same file, there will be audio that was on the timeline will be an empty frame. In addition, there is art work that was swapped out or updated to a character and the symbols becomes empty after reopening. I'm losing days and hours of work and I can't seem to find any answers or help to figure out what's going on.
Any insight would be appreciated!
thanks!I now use CS5.5 but I've noticed it on every version since CS4.
I JUST ran the latest update to 11.5.1.349
I'll let you know if it continues but for now I'm planning to learn a new software. Finally have some time to focus on this and if it works out I may say so long to Flash. I'll give CS6 a try but if it's not SIGNIFICANTLY improved (Brush tool comparable to ToonBoom, No losing data, Better Playback, Ability to export HTML5), it's just not worth it anymore. I've been using Flash since version 1 and since Adobe took it over, I hate to say that anything other than actionscript has gone WAY downhill. Many new features but they don't actually work well, or crash at runtime if used beyond a tutorial's level intensity. What's the point of all that functionality if it looks like garbage and can't perform on a professional level? Even if you do take the extra time to work slowly or limited to make it look nice - it loses the data! or now without HTML5 your venues of use are sliced in half? Pointless. I don't want to trash all my Flash experience, but I'm done defending an inferior product and waiting for it to catch up to a modern professional standard. I think my Flash days may be over very soon unfortunately. I feel like the're more interested in defending what they've created, than in making it work or even asking us what we want. I feel like a Girlfriend who's Man keeps promising to get steady work but hasn't after 10 years. Flash...we need to talk. -
Hey, ¿apple tv needs a tv with wifi for see movies from netflix?
¿Does apple tv need a tv with wifi to watch films from netflix?
No. You just need a TV with an HDMI port.
-
I have always imported my cds (including books) into iTunes using one step called "join cd tracks" which is under the "Advanced" menu. Never a problem. But today I was importing a 10 disc book and on the 7th disc all of a sudden the choice to join cd tracks was greyed out. I have tried it with other discs. No luck. How can I get to this option again. I was not doing anything different so don't know what took away this choice. Can anyone help me?
Thought it had worked but soon found out it had not.
after further days of trying finally, solved it for me Yesterday.
turned off notifications when locked, and bingo, wow.
i have not turned off iCloud but location services are also off.
best thing to do I found was keep checking your usage, settings, general, usage, and flip down to bottom, if the standby and usage are similar there is a problem, if there is a big difference then all is ok. Just keep turning things off and on until the difference is very apparent.
something on my phone was keeping the phone alive even when turned off, and I think this was the phone repeatedly trying to update continually.
to me this is definitely down to the iOS, my wife has exactly same phone and iOS but hers doesn't have any problem and the battery lasts for days.
the guy at the Genius Bar told me to restore the phone via iTunes, not iCloud. This is because iCloud remembers the exact info from your phone and simply reinstates it when you restore, and this includes the iOS too.
when I get home from holidays that's what I'll do, or wait for iOS 8 in few weeks. But I'm so pleased I finally made it work, I was beginning to think ditch the phone and buy Samsung.
anyway anyone out there please try my final solution and let me know if it works for you?
Maybe you are looking for
-
Ok stupid question time. I want to get a firewire enclosure and put 3.5 hard drive in it for my mac mini. Can I buy any old hard drive and jam it into the box or do I have to buya hard drive that is specific for the Mac? I mean are hard drives mac or
-
Adhoc query missing field labels
Hi, We have a problem regarding adhoc query. The fields are not showing all characters when you hit the refresh button at the bottom. For example, i chose to output Personnel Area, upon executing the refresh button, it is showing 2 characters only in
-
Urgent HELP! need for my Zen touch (20
Right here we go. I bought my zen touch online last year from a well known supplier. Absolutly brilliant mp3 plaey and happy with the value for money i got. The player did freee alot since i got it at inappropiate times eg. When i was on holiday and
-
Need help with player has stopped running. Thank you.
-
Upgradation from ECC 5.0 to ECC 6.0
Hi Friends, As an SD Consultant what would be the roles and responsibilities in the upgradation projects(from 4.6C/4.7E/ECC 5.0 to ECC 6.0) with regards