My apple TV is having trouble setting date and time

While fast forwarding a purchased movie, ATV froze.  Then it wouldn't play any movies.  Unplugged it, restarted it, tried to reset the settings, and it keeps getting hung up on date and time.  Any ideas?
Thanks!

It is having trouble connecting to the network. Make sure location is set correctly, DNS should be on automatic (settings - general - network). If on wifi try Ethernet. Make sure router is up to date. Reboot ATV and router

Similar Messages

  • TS3972 having trouble setting date and time

    having trouble setting up wired apple tv, can't get itunes because network don't setup time?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
        1.    Restart the Apple TV (Settings > General > Restart).
        2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
        3.    Restart your router.
        4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
        5.    Restore the Apple TV (Settings > General > Reset > Restore)

  • Having problem with the apple tv, because it still setting date and time and dont finish w the activation

    having problem with the apple tv, because it still setting date and time and dont finish w the activation

    That means it is having trouble connecting to the network. Make sure location is set correctly. Go to settings - general - network and ensure DNS is set to automatic. Check that your router is up to date. If on wifi try Ethernet.

  • The apple tv is stocked at setting date and time

    I Updated the Apple TV and now it requested to start the configuratio all over again and is stocked at setting date and time, can somebody help me?

    http://appletv2.com/stuck-on-setting-date-and-time-fix/

  • Apple Tv is stuck on setting date and time.

    I have my Apple Tv hooked up to my cellular network and it won't go passed the setting date and time screen. any ideas why it's not working?

    Welcome to the Apple Community.
    I don't have an answer to your specific question but trying to use the Apple TV with a cellular connection is not advisable, you will use up your monthly allowance in minutes.

  • My apple TV not able to set date and time

    Pl let me know how to signin in iTunes in apple as date and time is not working

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • HT1551 trouble setting date and time

    my power went out at home. when it came back on, appletv turns on, is connected to home wireless internet BUT can't access shows because the automatic "date and time" will not reset. FRUSTRATING. This occurred once before and I was able to correct it by hitting "restart" under settings. this "fix" isn't working this time.

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
        1.    Restart the Apple TV (Settings > General > Restart).
        2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
        3.    Restart your router.
        4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
        5.    Restore the Apple TV (Settings > General > Reset > Restore)

  • HT3180 My apple tv 3 keeps saying "setting date and time", but it's not connected to Internet, and I've restarted it for more then five minutes at a time. It also won't let me click menu to go back, but my apple tv light flashes. What do I do now?

    I'm about to call, but this is my last chance. What can I do?

    Aha! A bit more searching and I found the answer that just fixed it for me.
    Press Menu and the Back arrow at the same time until a broken chain icon appears on the top left of the screen.
    Let them go....
    Press Menu and Right arrow (forward arrow) until a "fixed" or "whole" chain appears.
    This enabled my apple tv to once again respond and get off the "setting time and date" screen.
    Hope it works for you.

  • Cant set date and time

    having trouble setting date and time.

    I was able to get my Apple TV working again by downgrading the firmware following the instructions in this message:
    https://discussions.apple.com/message/20008613#20008613
    In case that message disappears, here's my translation:
    1. Connect your Apple TV to your computer via USB. Don't plug in the power cable.
    2. Download the older 5.0.2 firmware from Apple here:
    5.0.2 (Apple TV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
    5.0.2 (Apple TV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
    3. Open iTunes and select the Apple TV. Hold down the option key and press the restore button at the same time.
    4. In the dialog that opens select the firmware that you downloaded.
    5. The restore process will take a few minutes. Once it's done plug your Apple TV back into your TV. If the date and time message persists just press the menu button to skip it. This got mine working again.
    Good luck !!!

  • Can not set date and time

    i can't not set date and time i live in florida and i am visiting hawaii.Brought my apple tv and airport express , created my own network to watch my apple tv but unable to set date and time on my apple tv.Pleas help.

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • HT201250 I am having trouble setting up my time capsule.  the amber light is flashing.  i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function.  I just want the Time Capsule to ba

    I am having trouble setting up my time capsule.  the amber light is flashing.  i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function.  I just want the Time Capsule to back up.

    Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
    Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you.

  • HT1595 My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

    My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

    I just went through this last night. (Aug 15, 2013)
    What I did to get back up and running. This is not the first time I have lost the network connection with my Apple TV 3
    Products effected: Apple TV 3 and Home Sharing (My Apple TV 1 was not effected)
    Power down (unplug) the Apple TV and power down your router ( in my case, it is a FIOS router, flipping the on/off works fine).
    Power both items back up.
    At this point, I usually can reenter my Apple ID and PW. and reconnect Home Sharing.  But for some reason I was unable to reconnect last night but was able to get it reconnected in the morning. I was jut to tired to deal with it last night.
    A new issue that is was able to fix after a good nights sleep.
    I did figure out, (after trying to reenter my ID and PW many times and having it tell me that my ID and PW was wrong), that when using the Apple TV on screen keypad to type in the user ID. DO NOT use the ".com" keypad button. Instead type out each character for .com. ( or what ever ending you use for your ID account.)
    Once I typed out my full ID and PW. everything is back to 100%

  • HT3180 Can't set date and time on apple tv

    I cannot set date and time. Help!

    It is having trouble connecting to the network. Make sure location is set correctly. DNS should be set to automatic (settings - general - network). If on wifi try ethernet. Reboot ATV and router.

  • Purchased LaCie external to backup having trouble setting up and getting started

    external to backup having trouble setting up and getting started

    Okay, first you will need to setup time machine to backup your system to the new hard drive.  Just open time machine and turn it on, then select your new hard drive and time machine will start the backup in a few minutes. 
    Take a look at this link, http://support.apple.com/kb/HT1427

  • How do I set date and time on apple tv?

    How do I set date and time on apple tv?

    Fixed the same problem, STEPS
    1. Reset your apple TV
    2.It will again stuck on that setting, ignore it by press menu
    3. Unplug ethernet wire
    4. Try to connect with wifi, it should be work with wifi connection as mine.
    5. Then you can switch back Ethernet wire after get fixed.
    Thanks. Lemme know dude if it's work.

Maybe you are looking for

  • Delta records are not loading from DSO to info cube

    My query is about delta loading from DSO to info cube. (Filter used in selection) Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck. Selected "Change log" and "Get one request only" and run the

  • I need linkability on an placed edge animation

    I brought in an edge animation that needs to link (on click) to a page within the site.  the animation has some interactive features that I established in Edge (and they are working fine) so I can't put a 0 opacity linking object over the top of it b

  • ABR delta extractor and entries written to the delta queue

    Hello Everyone, We have an ABR extractor and it's behaving like this: For example fields: PM Order Number, Post Goods Issue Date, Start Date, Work Qty, Projected Qty Create the PM order the entry is written perfect to the delta queue: 10019987, blank

  • RE : Data load

    Hi All , We have lot of fragmentation in the Essbase cube , so we are thinking to export the data of all the level 0 members and delete the data completely and load it again , because its the planning application using for Planning and budgeting sime

  • Error Fixing..

    i am getting an error as statement is not accesible in ECC 6.0 code is as follows..please guide me,,...full marks wud be given TABLES: MARA. DATA: BEGIN OF TMP_AFKO OCCURS 1.         INCLUDE STRUCTURE AFKO. DATA: END OF TMP_AFKO. DATA: RET_REQ LIKE Z