My Apple TV is locked on a screen with iTune icon and USB cable and is not let me move to any other screen
I bought Apple TV 3rd generation a couple days ago. It was no problem in the first day.
I freshly installed iTunes on my computer and tried to learn about Home Share. Next day,it was locked this screen and I cannot move any other screen. The LED light on the front is glitting in fast. I've tried,
1. Holding 'Menu' and 'down' butten for reset.
2. Disconnecting power cable
3. Turning off the router
After that if I reconnect to TV, it shows same.
Please help me...
Welcome to the Apple Community Dongchun.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)
Similar Messages
-
hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?
You may need to put the iPad in recovery mode to restore it.
http://support.apple.com/kb/HT1808 -
installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug.
I am unable to use the phone now. What should i do next? I plug in to itune in my computer and ask me to restore my phone? I will loose all my date?I hooked up itune and restore. after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug
-
installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug. is this corect? I am unable to use the phone now. What should i do next?
I hooked up itune and restore. after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug
-
Please guide me in Finding a sign appeared on the screen as iTunes and USB cable and connect your computer to a conclusion did not even thank
Do as the image suggests, connect the device to a computer running iTunes.
If it is still not working, try posting in your native language. -
My Ipod classic is corrupted and I only get the red X on the screen...Cannot move to any other screens. Any ideas on fixing without paying Applw?
Unfortunately there isn't. A Red X is usually an indicator that the HDD has failed, if you are unable to restore the device using iTunes and also not able to reformat using windows prior to restoring then a hardware repair is needed. If your iPod is out of warranty then the pricing you pay is to have the iPod replaced not repaired. You're looking at 129.00 - 179.00 plus shipping depending on the gen.
-
Ipad locked up while trying to do an update. Don't know how to fix and can't use ipad at all. Black screen with itunes app in the middle of screen and it shows picture of charger that it wants me to plug in. Nothing works.
You are in recovery mode, you need to restore it through iTunes on your computer. Follow the article you linked from.
-
We got a new computer so i plugged my Iphone4 in, nothing happened so i unplugged it now its just a black screen with the itunes icon & Usb and i cant turn it off or get on anything?
PLEASE HELP!Plug in your phone and launch iTunes on the computer. Then in the sidebar look for something about an iPhone. Click it and set up your iPhone. Has this iPhone ever been synced with another computer?
-
I just got my Iphone and all its doing is showing the USB cord Logo and the Ituns logo, I need help ASAP!
http://support.apple.com/kb/HT1808
-
I am trying to install Lion and I keep getting a fail message that says "Mac OS X could not be installed because the disk Hard Drive is damaged and can't be repaired". It only gives me the option to restart to try again but fails every time, an no other option. Is there anything I can do?
I'll guess that you're upgrading from Snow Leopard? You should be able to start using your original install dvd by inserting the disc and restarting while holding the C key. Run Disk Utility from your install disc and try to repair the drive. Then try the upgrade again.
-
IPod stuck on screen with iTunes icon, please help!
So, a lot of people may have had this problem already, so please help me. When I turn on my iPod touch 4g, a picture pops up with the usb pointing to the iTunes icon, basically meaing I have to connect to iTunes. My computer doesn't detect or cnnect to my iPod, niether does iTunes. Does anyone have ANY solutions?
If so, reply back. Thank you very much.Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
If still not recognized, check here:
iOS: Device not recognized in iTunes for Windows -
My screen on the touch is frozen. the screen shows a usb cable and the itunes logo above it. How can I get it back to the main screen
The screen is telling you to connect the iPod to a computer with iTunes via the USB cable. iTunes should open and give you instructions. If not, open iTunes and retore the iPod via iTunes.
-
is it possible to enter the lock screen with itunes or something else because i've damaged my phone and the touch screen is damaged that i'm not able to unlock it to make a backup on itunes ?
it would be very important to put the data from iphone 5 to my new 5s ..
looking forward to get some help
thxYou cant unlock your phone unless you put in your password. It may be possible that the apple store could do something about it.
-
Download of 8.2 ios on iPhone 5s caused phone to lock up
with iTunes icon and cable icon on screen .Will not reboot. How to fix?Hello jh901,
After reviewing your post, it sounds like you have not been able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
tried synching iphone for the first time on new PC and got error followed by itunes logo and USB cable picture. No idea what went wrong and now phone is in this screen locked. please help!
I tried connecting to iTunes and neither the PC nor iTunes recognizes the device. I went through all the troubleshooting on the Apple website for this issue and nothing worked. I've reinstalled iTunes, the driver, everything and still can't get either the PC or iTunes to recognize the phone. I don't know what else to do :-( any help or suggestions are highly appreciated!
I would hate to have lost all my info, especially contacts and calendar items since I have no idea what was backed up prior to the phone getting locked on this screen. I've been told that my only option is to go to the phone carrier and they will reset it for me, but that means it will wipe out all the info.
I hope someone has a fix other than that one.
Maybe you are looking for
-
Production error - Urgent - TSV_TNEW_PAGE_ALLOC_FAILED
Hi All, Im getting dumps in production system with Runtime Error: TSV_TNEW_PAGE_ALLOC_FAILED. and when checked the trace, it says as Data type "MCVBAPB" was found in a newer version than required. Any pointers to this wil be helpful thanks B
-
Restrict the user to edit Activity
Hi guys What will be the validation for the below scenarion 1) To restrict the user to edit any activity a " 5 Days after the close of the month". for eg is a activity is created on 13/02/2011 , it can be edited till 05/03/2011 Waiting for the soluti
-
Hi, I ran exp with full=yes. When I run imp in another (blank) database with full=yes, some of the grants do not get re-created, specifically some of the grants from sys (but not all -- most of them are re-created). Using Oracle 9i. Anyone heard of t
-
How to rename Threads in ThreadPoolExecutor
This is the code public static void main(String[] args) { ThreadPoolExecutor pool = new ThreadPoolExecutor(5, 5, 2, TimeUnit.SECONDS, new ArrayBlockingQueue<Runnable>(10)); for (int i = 0; i< 100; i++) { try {
-
I have a recurrent problem with my Nokia 6151, bought 2 months ago, that makes me think there is an error in the software. I use to use to switch off the phone at night, while programming the alarm on the morning, to wake up. I have been doing this f