My apple tv is not streaming from my itunes since my last update but streams movie previews so i know it is communicating to the internet any advice. P.S. i have already unplugged everythign and reset everything already so i need better advice.
It steams movie previews so i know it is connected to the internet and it sees my movies but when i click on them to play they take unusually long and then if they start they just dont load. I have had this unit for a year and have not had any problems till now. The last update changed the look and then it wont stream it is very frustrating. any advice will be appreciated. I have already unplugged everything and reset everything and still nothing.
Just look through the list of posts - you will see many people asking the same question. My father and i (different households) have the same issue. Apple techs want to blame it on interference or firewalls, BUT everything was working before the update so that is just a blow off answer. Apple needs to fix this.
Similar Messages
-
IPod Nano 6th gen. Not "properly identified" by iTunes since 11.3 update
Running Windows 8
Worked properly prior to update
receive error :""An iPod has been detected, but it could not be identified properly. Please disconnect and reconnect the iPod, then try again."
Have followed Apple recommended support page regarding this error with no resolution, I have tried multiple basic troubleshooting such rebooting, uninstalling/re installing
Please provide further assistance.contact antivirus company to walk you on how to allow itunes and ipod o your computer
-
After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
EtreCheck version: 1.9.15 (52)
Report generated August 30, 2014 at 6:56:41 PM EDT
Hardware Information: ?
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.5 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information: ?
AMD Radeon HD 6750M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
Disk Information: ?
ST3120026AS disk0 : (120.03 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
CHICONY USB NetVista Full Width Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[running] com.arcsoft.eservutil.plist Support
[running] com.bjango.istatmenusdaemon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
Launch Agents: ?
[running] com.arcsoft.esinter.plist Support
[running] com.bjango.istatmenusagent.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sophos.uiserver.plist Support
User Login Items: ?
Macs Fan Control
Firefox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
CUDA Preferences Support
Fan Control Support
Flash Player Support
Java Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
1% WindowServer
1% fontd
0% firefox
0% SystemUIServer
0% SophosWebIntelligence
Top Processes by Memory: ?
229 MB firefox
156 MB SophosScanD
152 MB InterCheck
131 MB com.apple.IconServicesAgent
115 MB SophosAntiVirus
Virtual Memory Information: ?
424 MB Free RAM
1.53 GB Active RAM
1.37 GB Inactive RAM
699 MB Wired RAM
1.26 GB Page-ins
0 B Page-outsI'd start by getting rid of the following software responsible for these extensions.
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
1. AppZapper
2. AppDelete
3. Automaton
4. Hazel
5. AppCleaner
6. CleanApp
7. iTrash
8. Amnesia
9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.
Be sure to remove your two Login Items. Finally do this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Firstly, I really like the new reminders in iOS 7. However, I noticed that apple reminders do not disappear from "all" and "missed" view when dismissed from "today" view of notification center by marking the circle by the reminder. it requires me to take an extra step and click on "all" and then click the "x" to make it completely disappear and clear from notification center.
why is this? am i doing something from?unfortunately, that does not address my question. your link describes how to clear the missed section of center. I know how to clear the missed section of notification center, as I said in the original question. I will re-peat my question to clarify. it is:
apple reminders do not disappear from "all" and "missed" view when dismissed from "today" view of notification center by marking the circle by the reminder. it requires me to take an extra step and click on "all" and then click the "x" to make it completely disappear and clear from notification center.
why is this? am i doing something wrong?
the behavior I would expect would be that when i click the circle on the "today" view. it would clear it out from the missed and all view so i would not have to clear in 2 areas.
I Hope this clarifies... -
Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers! Everything is connected but I get an "idle" message in the queue. I have "Reset printer system" and re-added these printers. No luck. Help?
Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html -
My Ipod has been disconnected from the internet. All efforts to date have failed,including resetting my network settings and trying to log in again.
Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My apple thunderbolt display (which I purchased 1.5 years ago; OS 10.7.5 Mac Mini) intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys, so am thinking it is a hardware problem with the display. Rebooting by pressing the power button turns the screen back on, but the same phenomenon has occurred several times. Could this be a software issue, or do I need to have my display repaired? Your feedback would be appreciated.
Hi ED, tough to tell, but it does sound like it's waking with the bonk, just not displaying.
Long shot but...
I wonder if it's a variation of this, of which I've seen many different symptoms...
Resolution
Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
Additional Information
This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
1. Open System Preferences > Security & Privacy > General. Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
2. Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
http://support.apple.com/kb/TS4135?viewlocale=en_US -
I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?
If both have Firewire ports then you can accomplish your goal by using Target Disk Mode. If this is not possible then you can do using an external drive or if you have a local network connect both to your network and use filesharing between the two computers.
File Sharing on Macs
Mac 101- File Sharing -
HELP"apple application support not found when installing itunes after a hard drive crash and replace
HELP" error "apple application support not found" when downloading itunes after a hard drive crash and replacement????
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I am trying to re-instal Acrobat Pro on my computer after changing OS and resetting everything. I am using the CC panel for installation. It shows it installed and won't let me install it. I doubled check everything on my computer and it is not installed. Even more, all my PDF files now show an HTML extension rather that PDF and only opens in my browser, which means the program is not here.
How to re-install it, please, when the CC panel installer won't let me do it? Thanks!Try "Pacifist"!
Pacifist is an application for Mac OS X that opens up .pkg installer packages, .dmg disk images, .zip, .tar, .tar.gz, .tar.bz2, .pax, and .xar archives, and more, and lets you install individual files out of them. This is useful if you need to install just one file out of a package instead of the entire package -
Need apple tv input....i have a receiver with two zones. Zone 1 which is my surround which streams from my itunes fine but zone 2 to my deck, same input doesnt stream. Using digital opt in auxillary. Will i need apple express instead to play 2nd zone?
The vast majority of zone 2's on home theatre systems don't support digital audio.
-
My iPhone 4 (GSM) will not charge when I plug it first, I have to unplug it and when I plug it again, then it charges... It is very weird... Has this happened to anyone?
Thank you in advance for the answer.It is yet happening to me. In my case it happens when I plug it to any kind of charger: socket, car... I have to pull it out the phone and plug it in again so it reacts and starts charging.
Of course, I tried cleaning with a soft, dry brush. This had no effect.
Thanks again and best regards. -
Suddenly all my Apple TVs do not show up in iTunes anymore
Ok, to say this right at the beginning: YES, I am an Apple product freak. I got several Apple products that I am synchronizing with my iTunes.
Three of these - 3 Apple TV (2 first gen and 1 ATV 2) were working FINE until about a four days ago. I had them all running in the same network. The two first gen ATV were showing up in iTunes; the second gen was able to access everything through the home sharing. All was well.
About four days ago I used my ATVs the last time without problem.
Today I cannot get ANY of the ATV to work in iTunes/access iTunes. They do not show up in the iTunes menu, I cannot access my music/tv shows/movies ... nothing works. I CAN access the internet. I can download new tv music/tv shows/movies. I can access the iTunes store and buy anything I like. I can access youtube through the ATVs ... everything internet related work - just not the connection to iTunes on my Win 7 computer (which can also access the internet and can ping all three devices without problem).
I deinstalled iTunes (now several times), deinstalled Norton 360 (because I read here in the Forum, that the Firewall might be the problem. I opened the ports for iTunes in my router (which I did not need before, but did it anyways just to test). Nothing works. I even reset all my ATV and reinstalled them to the newest firmware/software version - no effect. I am at the end of my wits. I tried everything both via Ethernet cable and WiFi ...
Now - each time I reinstalled iTunes it pretty much automatically had all the configuration iTunes had before I uninstalled it. Because I (at least) think I tested all other factors, I wonder if maybe a problem could have occured within the configuration which is now being copied to each new installation of iTunes. Does anyone got an idea, how to circumvent that?
Or does anyone have any other idea, which I did not try already? I would be very grateful, if someone could help me out with this problem. THANK YOUPlease disregard. After a new installation of Win 7 and new iTunes everything works again. Not sure what the problem was ... but at least it works now. Thanks everyone!
-
My apple id is not working to open my icloud on my pc, but my apple id opens.. help?
my apple id is not working to open my icloud on my pc, but my apple id opens.. help?
It depends on how you set up your phone. You can have different Apple IDs for different services; you ID for purchasing can be different that the one you use for iCloud, iMessage, FaceTime, etc.
If you have only one ID for all of these and you have now changed it, you need to make these changes on your phone. To change the ID you use for purchasing from the iTunes and app stores you go to Settings>iTunes & App Stores (or just Settings>Store in iOS 5), tap the ID, sign out, then sign back in with the changed ID and/or password. To change the ID for iMessage you go to Settings>Messages>Send & Receive (or Settings>Messages>Receive At in iOS 5), tap the ID at the top, sign out, then sign back in with the changes. Same for FaceTime by going to Settings>FaceTime.
To a different ID for iCloud your go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your new ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account. -
Dear Apple, i took 4 videos from my friend's windows 8 pc but all of them shown a error that To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More." what should i do now? please help me Apple
If the videos are .wmv files, VLC from VideoLAN will play them and pretty much any other media format.
BTW, we are not Apple; we're just users like yourself.
Maybe you are looking for
-
Is it easy to install a new DVD drive in my Powerbook?
I recently posted a question about installing a new fan into my Powerbook G4. Someone put up a link to a photo-page of instructions that scared me right out of doing it myself. Big project. Now my internal CD/DVD drive is shot. Is it easy to install
-
LinkedIn doesn't show the CAPTCHA when logging in
While trying to log in to LinkedIn, the CAPTCHA, or security tool, doesn't show up on the screen and therefore can't get type the letters/numbers to get in. Any advice on who to rectify this? Version 3.6.8
-
CS6: Widget Browser and LightBox Gallery Widget
I am a student-- i am presently taking a dreamweaver CS6 class. i think understand correctly that the widget browser and the lightbox gallery widget are no longer available. if so, what do i for the replacement??? thx.
-
hi , i created a view and i wanted to change some criteria when i tried to recompile or even to drop it just "hang" there or it's taking a real long time to execute the command what could go wrong here ? tks & rdgs
-
Found an Ipod touch--how can I locate the owner?
I found an Ipod touch--how can I locate the owner? The Ipod requires a passcode.