My apple tv is showing an image to plug into i tunes

My apple tv is sayong to plug into ituens.... and still isnt working

the image mean that you should take a microUSB cable and connect the microEnd into the appletv and the normal usb end into your computer and from there use itunes on the computer to restore the firmware of the appletv

Similar Messages

  • My phone keeps resetting and then shows the icon to plug into itunes but when i do itunes tells me that it can't connect to my phone because it has a passcode and wants me to unlock it to connect. My phone only gives me the option to make emergency calls.

    My phone started resetting today over and over and then shows the icon to plug into itunes. When I tried plugging in, a message pops up saying that itunes can't connect because my phone has a passcode and i need to unlock it to connect. my phone won't let me do anything more than make an emergency call. it wont give me the option to enter my passcode to unlock the phone. What can I do?

    After a visit to the apple store, they were able to get through my pass code but unfortunately I found out that is was a problem with the logic board. Since Apple only wants to sell and not fix, I was able to locate an iphone repair near me that deals with logic boards and they are currently working on it right now. i should be getting it back soon. Im not sure if the problem you are experiencing is the same as i went through but it does sound like it may be also a hardware issue and would suggest searching online for an iphone repair place that can diagnose what exactly is wrong. Hope this helps.

  • Hello Apple enthusiasts.  I had uploaded 250 cds into I tunes.  It all vanished in computer crash.  Is it possible to recover through Apple i-tunes account?

    Hello Apple enthusiasts.  I had uploaded 250 dcs into I-tunes.  It all vanished due to computer crash.  Is it possible to recover from I-tunes site?
    Advice please?
    Thx,
    Gingerman

    See also this post.
    tt2

  • Apple tv 3 shows green image or with static

    Hello,
    I have a problem with an apple tv 3rd generation.
    As the title says, sometimes the image is green or just static.
    I connect it through HDMI and have tried on 2 different tvs (other HDMI devices work fine). I even restore the firmware and nothing.
    This is a short video of how it looks like http://www.youtube.com/watch?v=dRXzP0ZSJqo
    Anyone knows what is wrong with it or how to fix it?
    Thanks a lot.

    Well my issue is fixed, turns out the update with which cause my issue must have locked somthing up in the settings.
    I spent some time with one of the support people which is level two or higher and we found that the ATV3 had IP address etc setting for ethernet even with no ethernet/wifi available. We restored the ATV3 several times and even went to earlier versions of firmware to try to undo this, sadly this failed and my ATV had to be replaced, Apple sent out a new one now all is good again.
    I suggest you contact them and if you are able to get them to replace it for you.
    I did also notice that the iTunes update that came out at the same time had a problem which may have cause this to happen in the first place.
    Restore did not work unless you help option key while hitting the Restore.

  • My ipod is showing reset format f ,plugged into my computer ,the comp then says unable to reset format;help!

    ive tried to reset my ipod 120gb and its saying that format F needs to be reset ,but my laptop is saying its unable to do this.Anybody help!

    next thing i would think of is to ask bestbuy apple retailer or bestbuy pple to help u out from here bc im not sure what to do next if u cant get it into dfu mode.
    all i can think of is to hold home and power for 30 seconds in the meantime of showing the apple sign at least once or twice.
    either that, home and power flashes once and 1/2 sec later release power while holding home still and plug it in wihout trying to let go the home button. dont even let go until itunes says somthing remotly saying anything ...lol

  • HT4623 After trying to update, my phone will only show that i should plug into itunes?  What should I do?

    Why is my phone stuck after downloading the newest update?

    Most intelligent people would plug the device into the computer running iTunes as suggested on the screen and follow the on-screen prompts.

  • HT4623 after installing ios on my ipad, its showing a display to plug into itunes. i cant operate my ipad. what happened?

    can anybody help me?

    i have same problem....even connected to itunes using laptop also not function.
    now my ipad not charging.

  • HT4367 Apple TV 2nd gen factory restore (blinking lights when plugged into TV)

    I have a 2nd gen apple TV, and when doing the above steps my unit does not show up in iTunes...
    I get rapid blinking lights when plugged into tv, and when plugged into itunes as per the steps here, itunes showing nothing.

    After trying to update the Apple TV 2nd generation it had the plug into iTunes message. When I plug into iTunes 11 and hit restore a message comes up "The device cannot be found" rendering the device useless. Please help!

  • TS3694 My Iphone4s is stuck on the image saying to plug into Itunes but when I do, and I update, the computers says it is in recovery mode to fix the phone first, but I can'nes image, even after restarting and taking ou

    My phone is stuck with the image of 'plug into itunes' on the face when I try to install ios7. after installing all but the ios7 the comp. says the phone is in 'restore mode error 6, and says to restore it first from the phone b4 I can use itunes but, again, my phone is stuck in the 'plug into itunes' image ????

    The problem is your friend's music does not belong to you.  It is owned by your friend.
    I'm afraid you cannot do what you are trying to do.  Restoring the iPhone is what you would have to do.
    In the future, put your music on the computer and transfer it to the iPhone, not the other way.

  • I tried to restore my Apple TV.  It froze on a connect to iTunes screen and showed an image of a USB cord.  Now it is frozen there.  Any ideas?

    I tried to restore my Apple TV.  It froze on a connect to iTunes screen and showed an image of a USB cord.  Now it is frozen there.  Any ideas?

    Did you try restore from teh AppleTV menu connecetd to TV.
    If so sounds as though something went wrong.
    Hook up to a computer using a micro USB cable alone, run iTunes and select the AppleTV to restore:
    http://support.apple.com/kb/HT4367

  • My Apple TV stalled during an update and now just shows an image of it being plugged into a USB. It won't complete the update and does nothing when I plug it into my Mac via USB.

    2 Apple TVs. The first won't reboot, it stalled during an update and now shows a picture of a UBS plug. Ive tried to plug into my computer, nothing happens. At a standtill.
    The second Apple TV works but only if I send something via Airplay. The remote no longer has any affect. The light on the front of the Apple TV blinks when I push a buttom on the remote but nothing happens.
    Any Ideas? I am starting to think I need to replace them. Thanks.

    Ok, with itunes open on the pc, plug one end of the usb cord into the computer, but not connected to the ipad.
    now, press the power button on the ipad until it turns off.
    Then, press and hold the home button on the ipad at the same you plug the usb cord into the ipad. DON'T LET GO OF THE HOME BUTTON.
    Keep holding the home button until you see the recovery mode message pop on the itunes window.
    When that happens, you should now be able to restore.

  • After connecting a late 2008 MacBook to an external monitor can I show different images on them?

    After connecting an external monitor to my MacBook(late 2008) is it possible to show different images on the two screens at the same time?
    TIA

    Yes. Open System Preference (under the Apple menu) and select Displays. See the instructions in this Apple article for how to continue.
    Best of luck.

  • Photos 1.0 not showing all images from Photos Library.photoslibrary folder/file after update install

    I installed the update that changed my iPhoto to Photos 1.0, and the new Photos program is not showing all images from Photos Library.photoslibrary file/folder (not sure to call it file or folder since it is actually a folder with all my pics but it acts more like a file) after update install.  The Photos Library.photoslibrary file/folder shows to be 55 gb in size, and it shows to be loaded into the photos program, but there are maybe a few weeks of pictures showing instead of a few years.  Lots of pictures in the 55 gb are not showing for some reason. 

    No - iPhotos has not replaced anything - it is new and an addition - iPhoto is still on your system in the applications folder and still works just fine
    Outlook is not supported by Photos - not sure if the support must come form Apple or MS as Photos uses a different interface to external packages than iphoto did
    LN

  • Mail not showing embedded images

    This problem has been bugging me for a while.
    I am getting some emails (from my company communications) that are incorrectly formatted by Mail. I see big boxes labeled "Missing Plug-in". The rest of the text is there, but those big boxes make the mail hard to read.
    So today I decided to look a bit deeper into the problem. I brought it down to the presence of image tags that call for embedded images (included as attachments) using the "cid:" protocol. For example:
    <img src="cid:[email protected]" alt="Find" border="0">
    Is this a restriction in mail (I am running mail 6.1 on Mountain Lion). Or is there some config parameter I need to tweek to enable support for embedded images ?
    Thunderbird has no problem. I also did a quick check with Google Mail and Yahoo Mail, and neither show the images. But they just show nothing, so the resulting email is still readable. Mac OSX Mail shows big boxes with the "Missing Plug-in" note. I would be happy if Mail just ignored the images.
    I should point out that mail on iPhone and iPad work fine (they display the images).
    Albert

    Try this - worked for me...
    https://discussions.apple.com/message/20652845#20652845
    If that doesn't link properly, here's the original solution, cut and pasted:
    "MailPluginFix"
    From the Code2K:Labs site: http://code2k.net/products/mailpluginfix/
    From MacUpdate: http://www.macupdate.com/app/mac/37804/mailpluginfix
    Just download the fix and double-click it - next time you open mail, you'll see your attachments.

  • I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

    I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

    Mac 101: File Sharing
    Mac OS X 10.7 Help: Transfer files between two Mac computers
    Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
    Mac OS X 10.7 Help: Use iDisk to share files
    Mac OS X: Sharing your files with non-Apple computers
    How to share a Mac's files with a PC and vice versa.

Maybe you are looking for

  • How can I control print quantities from the main browser?

    So here's the workflow question I want to select photos to print but I want to print a different quantity depending on criteria. The photos may be in different albums, etc.. Selecting them all and trying to set the quantity in the Print Order window

  • Conversion of idoc into xml without  XI

    Hi everyone i am working on EDI i want to know procedure to convert our idoc into XML without using XI. is it possible, if yes then plz reply me with procedure. Thanks & Regards Vimarsh

  • Can't add Custom Image to Contact Card

    Just upgraded to Snow Leopard. Noticed that when making up a new contact card, I can't just drop an image (somebody's face) into the Custom Image box anymore. The box lights up -- highlighted in blue -- but it won't accept the image. Any ideas?

  • Problem in Layout query

    create table abc (code number , qty number , lot varchar2(20)); insert into abc values (39 , 120 , 'M12-39-1'); insert into abc values (39 , 120 , 'M12-39-2'); insert into abc values (39 , 120 , 'M12-39-3'); insert into abc values (150 , 60 , 'M12-15

  • ItemFocusOut called twice when you are using datagrid

    Have you ever encountered itemFocusOut called twice when you are using datagrid. I use this event to check the text that has been entered. Also when I use regex expressions if((event.itemRenderer as TextInput).text.search(new RegExp(/.*\..*\./)) != -