My Apple TV light is on but no signal from TV

Hi There,
Everything is plugged in properly but and the I put on my TV is correct but there is no signal.   How do I setup my Apple TV?  My router is across the room.

Which TV are you using? Are you connecting via HDMI? Is it secure? Have you tried a different cable? Different port? Made sure that you've navigated to the correct input on your TV?

Similar Messages

  • Apple TV light is on but no picture

    My Apple TV light is on but I get no picture. In the past I have unplugged the unit and tv and the picture came back. Now the tv only says format not supported. Resetting the Apple TV as proven to be fruitless(pun intended).

    We do not know if he did an acutal reset yet, or just a restart.  Or if it was working before and now now, or if it was used and already set to a speciifc video resolution for another TV, etc. etc. etc.  Going straight to the nuclar option as the first response just makes everyone's life harder.

  • Apple TV light is flashing but the box doesnt have a micro USB on the back. Any suggestions on how I might restore.

    I have an Apple TV2 but there is no micro USB port on the back. There are only 4 ports on mine not 5.  I need to restore.  Any ideas please?

    Oops, forgot the optical audio out. 5 ports.
    Apple TV (2nd and 3rd generation): Guide to ports and connectors - Apple Support

  • Mac book pro will not start up.  Charging light is on, but no response from computer.  What happened?

    The Mac Book Pro was fine, and then just stopped working.  I connect the power source, and the light is on as if it is charging.  However, when I try to turn the laptop on, nothing happens.  There is no response whatsoever.  Any ideas what happened and what I need to do?

    Examine this support article for possible solutions:
    http://support.apple.com/kb/TS1367?viewlocale=en_US
    If no success, a trip to an Apple store genius bar is the best recourse.
    Ciao.

  • Erased hard drive now when installing osx is asking for apple id to reinstall osx but I purchased from someone else

    I was trying to install Mavericks on the computer without backing up like an idiot. It said the hard drive was damaged and could not be repaired. Long story short I cleared the hard drive and now I don't have an operating system. I can reinstall lion from recovery mode, but I didn't buy it with my apple ID. Also I'm in Bavaria so there are no apple stores nearby. How can I get lion on my apple account. Also the last OS I had was 10.8.5 (Mt Lion)

    It's a 2008 aluminum by the way

  • Apple TV Will Mirror Sound but Not Video from AT&T Uverse App

    I recently purchased a flat screen tv and a Apple TV to stream Netflix into my office where I don't have a cable hookup.  I also use the AT&T Uverse App on my ipad and iphone to watch television when I'm on the road or my roomate has control of the main living room tv.  I thought I would be able to stream from the Uverse app on the phone or iPad3 to my Apple TV, but it only seems like I can get audio for some reason? The picture stays on the menu page on the television, and a grey note icon (like when you don't have an albumn cover in itunes) shows in the lower corner. 
    Is the app not compatable? Is there a problem with my apple TV? If it's "mirroring" my iphone or ipad, why won't it just show?
    Iphone: Iphone 4, and I tried with roomate's iphone 4s
    Apple TV2 (purchased 12/19/12)
    Connected via HDMI Cable
    Thanks for any help!

    The app has not been enabled for airplay, this is up to the developer to do. There is a difference between mirroring and basic airplay.

  • Pavilion slimline light come on but no signal on monitor

    the monitor is fine for sure but it says no signal when I turn on my pc. The hard drive don't run I think either as the orange light don't flash nor do I hear it running. Only the fan runs. The keyboard light only flashes at the point when I push the power button. I use the monitor on other pc and it work fine. I can eject the DVD drive tho while the light power light is on. What's wrong, please help!!
    This question was solved.
    View Solution.

    A lot of hp slimline main board were manufactured with a defect. Hp have extended watenty on these models that they have listed. I spoke to several online techs that eventrually deemed my pc as having such problem due to the problems that I described and the results of all the routine trouble shoot procedures that they asked me to carry out. There is a particular link that describes the situation, and that they have extended the waranty period for such models till dec 09. I got them send me a return box for me to get the part replaced. Pretty neet afterall. I can't post the link because I'm using my iPhone therefore can't copy the link.

  • HT3180 My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

    My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

    Was the restore done via iTunes?
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
    If so then you may need to take it to Apple.

  • HT1600 I have only updated my Apple TV this evening. But I have a USB image coming up on my screen. The blue light is flashing. Ive checked the box and there appears to be a 'small' usb port under the hdmi slot. Have I doine something wrong?

    I have only updated my Apple TV this evening. But I have a USB image coming up on my TV screen. The blue light is flashing. Ive checked the box and there appears to be a 'small' usb port under the hdmi slot. Have I done something wrong?

    Something has gone wrong - the AppleTV needs to be restored by connecting to a computer running current iTunes version using a microUSB to USB lead.
    AppleTv2 does not require power when doing this.
    Select the AppleTv Device on teh left in iTunes and restore to current firmware.
    AC

  • I accidentally sent the wrong lighting cable back to apple it looks the same but it's the generic one from amazon. Will they charge me for it?

    I accidentally sent the wrong lighting cable back to apple it looks the same but it's the generic one from amazon. Will they charge me for it?

    Lyn,
    Be sure to let us know what happens when they process your return.

  • Apple to lights are flashing and displaying to connect to laptop to restore but I don't not own a laptop.

    Apple TV  light is flashing and displaying to connect to laptop to restore but I don't not own a laptop. can I restore with the remote ?

    Welcome to the Apple Community.
    I assume when you say you do not own a laptop, that you do not own a computer of any kind.
    If you don't have a friend that has a computer that runs iTunes, then you can always take it into the nearest Apple Store and they will restore it for you.

  • My iPod classic wont connect to the computer. The light comes on but it doesn't even come up with 'connected' screen. Have tried everything on apple troubleshoot but hasn't helped. Still works in Logitech iPod player. Any suggestions please???

    My iPod classic wont connect to the computer. The light comes on but it doesn't even come up with 'connected' screen on the ipod. Have tried different computers, usb cables and ports, as well as restarting computer, updating itunes, and rebooting ipod. Still works in Logitech iPod player, however it has just wiped itself of all songs so at the moment I'm stuck with a useless iPod. Any suggestions please???

    If you happen to have a USB docking cable that is new (or close to being new), try using that one.  If the cause is the dock connector on the iPod becoming worn, if you try it with a cable that is not worn, it's possible that it may connect for data.
    I believe the dock connector is internally part of the logic board, so it may not be economical to have a repair shop (including Apple Store Genius Bar) do the repair.  You'll need to ask for pricing. 
    If you are good at such things, this web site has DIY repair guides
    http://www.ifixit.com/Device/iPod_Original
    If it's the most recent iPod classic, it appears to be quite difficult to pry open.  I have an older 4th gen (and 3rd gen) "classic" iPod, and those are fairly eash to pry open, using the plastic tools.

  • My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen

    My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
    I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
    Reset SMC  no change

    Run the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.

  • Is it possible to change the color of my apple logo light

    I have a macbook air and the apple lights up white, but I'm using F.Lux to help with backlight color temperature and the apple doesn't seem to change color even though the screen does. I thought the apple was controlled by the backlight?

    The backlight does in fact light up the apple; however, the Flux application does not adjust the color (or brightness) of your backlight, it adjusts the color settings of your screen to make it appear warmer or dimmer. Which means your backlight brightness and color stays the same. I'd love if the letters had an amber/white LED instead of just white, and have that synced with flux, but oh well.

  • Apapter light is green, but MacBook is not fully charged.

    My MacBook's power adapter light stays green, but my computer is not fully charged, the indicator in the menu bar says 98%. I am very confused, anyone have a possible solution?

    The charging circuitry turns off once the battery is fully charged. It will come on again when the charge level drops below 95 percent. Until then the battery is fully charged so the charge indicator on the adapter will stay green.
    If your battery never attains 100 percent charge level it may be because you've never calibrated the battery.
    If you've calibrated the battery but it still will not charge fully or doesn't hold the charge, then the battery may be defective. You can have it replaced under your warranty by taking the computer to an Apple service center or calling AppleCare. Click on the Contact Support link at the bottom of this page for AppleCare's phone number.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Maybe you are looking for

  • Change of Min Pool Size has no effect?

    Hi, we are still using odp 9.2.0.4 on windows server 2003 webserver and oracle database 9i on Sun solaris. Recently we discovered a problem using Min Pool Size = 1, it seems that if new connections are required we sometimes get a connection timeout.

  • E-mailing report output as an attachment

    Hi Experts, My requirement is to automatically e-mail the output of a report. I want my program to e-mail whatever appears on the output screen as an attachment(pdf or html), when the report is executed. Thanks, Rakesh.

  • On time account

    Hi What is mean by on time account when i am posting f-53 i am getting erro my client suggested pls check on time account Regards Babu

  • Php select using column Field names ?

    Hello, I need some advice using this select usually I do this $query = "SELECT * FROM table WHERE title LIKE 'body'"; it works, is fast and no problems. But now I've a big table [id, ..., ...] and need to select just the row starting with body, so I

  • Read table field with getString()

    public String[] getExportSParams(JCO.Function function, String structure,                String[]tablefield) {           JCO.ParameterList export = function.getExportParameterList();           JCO.Structure structures = export.getStructure(structure)