My apple Tv show greeny color when i connect it into a projector

So i just discover this problem yesterday, i have an apple tv and imac. I use the same projectors and same cable, but the color output looks so bad (greeny color) when i connect it into my apple tv, but when i connect it to my i mac, the color is flawless and the projector works fine.. so could anybody explain it to me, I appreciate your help.. thank you..

After connecting AppleTV 3 with USB and starting iTunes you need to connect the power - the steps are different to AppleTv2 which does not need power after connection.
IS your itunes up to date? It may not know about AppleTV 3 if it's more than a few months old.

Similar Messages

  • My Iphone 5 is not showing in Itune 11.0.4.4 but it show in windows when I connect it to charge

    My Iphone 5 is not showing in Itune 11.0.4.4 but it show in windows when I connect it to charge

    See: http://support.apple.com/kb/TS1538

  • Device stops showing on computer when I connect iPod or phone.

    My iPod device no longer shows in iTunes when I connect. And then when I unplugged the USB connection, the iPod is stuck on "Connected" and will not go back to the regular view. My phone has also stopped showing up as a device connection on my hard drive, even though it shows as connected.
    I disconnected Firewall in case that was the problem, but it hasn't changed the problem.  Can anyone help?

    Patricia,
    Have a look at this support article.
    http://support.apple.com/kb/TS1538
    B-rock

  • I have an iPhone 5. It says I have 537 songs on it but every song shows the cloud icon. I have gone through every suggested step I've googled and deleted songs but settings still shows them. When it's plugged into my mac itunes shows it only has 42 songs.

    I have an iPhone 5. It says I have 537 songs on it but every song shows the cloud icon. I have gone through every suggested step I've googled and deleted songs but settings still shows them. When it's plugged into my mac itunes shows it only has 42 songs.

    Hi ellafromva,
    From your description, it sounds like you may have iTunes Match activated; you may find the following article helpful:
    Apple Support: iTunes Match on iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5637
    Regards,
    - Brenden

  • HT201263 I Have an iPhone 5 runnig ios 7.0.4. It wont start as the apple logo keeps on blinking when i connect to wall charger or itunes. I even tried to restore it but an error 21 is being displayed. Any one can help me in this situation

    I Have an iPhone 5 runnig ios 7.0.4. It wont start as the apple logo keeps on blinking when i connect to wall charger or itunes. I even tried to restore it but an error 21 is being displayed. Any one can help me in this situation

    Read http://support.apple.com/kb/ts3694#

  • Show explanation text when cursor is set into InputField

    Hi all,
    I have a WDA component with a view that uses UI-elements Label and InputField.
    The InputField has a explanation text. This explanation text is shown only if I´m moving the mouse pointer over the label (label is underlined). Is there a possibility to show the explanation when cursor is set into the input field?
    We´re using SAP NetWeaver 7.0 with EHP 1 and SP 08.
    Any help would be appreciated.
    Alex

    Hi,
    Just put the explanation text into tooltip propery of InputField. It will show the text when the cursor is moved over it.
    Thanks,
    Chandra

  • My Ipod does not show in Itunes, when I connect it shows for a second a disappears again, I have gone through the trouble shooting but no luck?

    My Ipod does not show in Itunes, when I connect it shows for a second a disappears again, I have gone through the trouble shooting but no luck?

    :-) the problem is solved. Thanks to a great typ in one of the other discussions with alt+cmd+S iTunes looks again like something I recognize. After removing the iPod from iMac and also from the connecting "holder", turning it on ad off, rebooting the iMac, maggic happens and the iPod now shows in iTunes and everything works just fine.

  • My mimipad always give no signal when I connect it with the projector

    MY min ipad gives me no signal when I connect it with the projector please help me

    How is it connected - via cable or wireless?
    Has it ever worked?
     Cheers, Tom

  • Apple TV shows up duplicated when attempting to airplay form iOS device

    I have a 2nd Generation Apple TV and recently updated it to iOS 8 along with all my other devices.   Recently however a problem has occurred when I go to airplay from my iPhone or iPad to the Apple TV.  Two Apple TVs show up, when there is only one, and one of them requires a passcode, which I do not have set up on the Apple TV.  Has anyone else encountered this problem?  How do I fix?

    It can't be neighbors.  My computer is not picking up this 'other ghost' apple TV, and I have the Apple TV plugged to ethernet and my phones bluetooth is off so there is not other way to connect to my apple TV but through my network and there is no way I am connecting to anyone leases.  I changed the name of mine so it shows as 'Living Room' and right above it shows another apple TV just called 'Apple TV'.

  • My itunes music is showing shaded out when I connect my ipod and is not showing in my library. How do I get the music from my ipod into my library. It won't sync

    Mu ipod contains my itunes music library but when i connect it to my laptop the music only shows shaded out on my ipod and does not appear in my itunes libary on line. My iphone only has my playlist in it and as my libabry is only on my ipod it doesn;t allow me to import to my iphone

    Hello rhys139,
    It sounds like you are trying to transfer music from your iPod to your computer.  I found an article with information on transferring media from your iPod to your computer:
    iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
    http://support.apple.com/kb/HT1209
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Apple tv loses home sharing when my computer goes into sleep mode

    Just recently, my Apple TV says that home sharing is off when my computer goes into sleep mode.  It never used to do that - any suggestions?

    I have the same problem here. Always back-ed up with Time Machine (OSX 10.9 Mavericks) to Western Digital drives. MyBooks, MyPassport 1TB (USB 3.0), all works fine. Time Machine is actually doing back-ups overnight. Since I got this new 2TB MyPassport Ultra USB 3.0 it's working perfect during days, but every morning when I wake up the MacBook from sleep, I get this annoying error:
    Time Machine couldn’t complete the backup to “MyPassportUltra”.
    Unable to complete backup. An error occurred while creating the backup folder.
    Latest successful backup: Today, 02:27 am
    I'm also not able to write anything to that drive, or unmount it. It stil shows up in Finder, and I'm able to read all the data perfectly fine. When I do a Disk Utility Verify Disk directly after, I get this:
    Checking volume
    disk3s2: Scan for Volume Headers
    Invalid Volume Header @ 0: I/O error
    Invalid Volume Header @ 2000021315072: I/O error
    disk3s2 is not a CoreStorage volume
    Error: This disk needs to be repaired. Click Repair Disk.
    I don't click Repair Disk, as this will probably screw up my partition. Instead, I have to unplug the USB cable (which is bad for the drive, there's no time to park the drive's heads) and plug it in again. After clicking Backup Now, Time Machine immediately starts backing up, and the drive works fine the rest of the day.
    I contacted WD Support, and they are sending me a booster USB cable. As System Information reports, the drive receives enough power though:
    Current Available (mA):          900
    Current Required (mA):          224
    Unfortunately there's no firmware update for this drive, which will probably fix this. See this topic: https://discussions.apple.com/thread/4196704.

  • My mac will restart & show Blue Screen when plugged ipod classic into my mac

    When i plugged ipod into my mac and i put to the Disk Mode my ipod , the computer will restart & don't let me to restore my ipod !!!! Please help and give me a solution !!!
    My ipod & mac info :
    iPod Classic 160gb (2009)
    Mac Book Pro (2011)
    iTunes 11.1.3

    If your computer is  a 2011, you can stop the blue screen by turning off graphic card switching.  Under apple, system preferences, energy, uncheck box.  Temporary fix.  Your logic board may need to be replaced if you are under warranty or have apple care otherwise $1000.00.  May be software or firmware problem but apple has provided no info.  Replacing logic board has corrected problem for some users and not others.  Everything I've mentioned only applies to 2011 MBPs.

  • When I send a 5v from the DAQ, the voltmeter shows 5V, but when i connect a "normally open valve" from parker to the DAQ, the voltage automatically decreases to .14 V. It seems like it is being grounded. Why is this happening?

    We are sending 5v to the DAQ using a voltage generator. We hook this up to a voltmeter and we see 5V. When we connect the voltage generator to a "normally open valve" from parker, the voltmeter shows .14V. It seems that when we connect both wires from the valve to the voltage generator, the wires are acting as a ground. We wish to control the voltage that flows to the valve through Labview. We checked the wires of the valve and they are working fine becuase if we send a constant 5V from the DAQ and grounded it, the voltmeter shows 5V. Does anyone know why the wires are acting as a ground and dropping the voltage to .14V?

    nsatpute wrote:
    Our DAQ is NI USB 6259. The valve only requires  a max of 5V and our DAQ does provide up to 5V. However, after connecting the valve to the DAQ, the voltage drops to almost 0. We are assuming that the wires somehow act as a ground, but we are not sure if this is the case. 
    The issue here is not how much voltage the valve wants, it is the current the valve needs.  The 6259 can only put out 5mA through an analog output.  Your valve very likely needs a lot more than that.  So you need to add in an amplifier circuit that can supply more current to operate your valve.

  • Why did the colors on my Mac Air go weird when I connected it to my projector after updating from SL to Mavericks?

    4 days ago, I updated my iOS on my Mac Air from SL to Mavericks. I connected it up with my projector to check on a keynote presentation I was preparing. The colors on my Mac went a strange greenish hue and this was accurately mirrored through the projector onto the screen. I tried to adjust the color setting in Displays and played around with different resolutions in the vain hope that something would fix it, but nothing did. There were all these new customized color adjustments you could do which I had never seen before. I have a MBP that I hadn't (fortunately) updated and went I connected it to my projector (with which I have never had any issues with before with my two Macs), there was absolutely no problem so I know it is very definitely an issue with Mavericks. In the end, in desperation as I do a lot of presentations and I can't afford to have this happening, I erased my hard drive and restored SL from Time Machine which I had fortunately done a back up just before doing the update. I had read in some previous threads here that restoring to a previous iOS is a long and complicated process but it was fortunately not the case for me - my Time Machine did it painlessly for me. My question is - I am now too afraid to try Mavericks again - but is there an explanation why this happened to my Mac Air?

    Check Settings > General > Cellular > Cellular Data and make sure it's "On".

  • Illustrator Showing Correct Colors, When Exported or Saved as PNG Certain Colors Change

    How can I resolve this?  I am new and just downloaded the trial. 
    Please help me.

    Exactly, so if you change your colour mode to RGB (File > Document Color Mode), your colours in Illustrator will change slightly but when you export to PNG there should be no colour change.

Maybe you are looking for