My apple tv works, except it doesn't stream my photos or recognize my computer.  Any thoughts on solving these issues?

My apple tv works, but doesn't stream my photos.  It also doesn't recognize my computer.  Any thoughts on solving these issues?

Hello MTTexas,
Try to reboot Apple TV, reboot router, reboot computer, also reset your device if you have one. Guide to reset device: (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Then, after that go online to: speedtest (You must be online for this to work on YOUR WIFI) Click "begin test" and it will test download and upload speed of your WIFI. A modern home can vary; an average WIFI speed is download 1-20 Mbps, upload .5-15Mbps. If it is in that range then you should be fine.
Take care,
Landon787.

Similar Messages

  • Ios 6 orientation doesn't work and boot time increases. How to solve these issues for dummy? I don't understand code and strings suggested by others.

    I just upgraded from ios 5 to ios 6 on my ipad2. Now orientation doesn't work properly. Boot time increase, it takes longer time to boot. Is there any configuration to solve these issues? I can't understand the explanation with code and strings found on google to solve the orientation issue. Any easy configuration for dummy ?

    It supports well for ios 5. I couldn't remember (5.x.x) exactly but I always keeps update for ios5 and the abnormality starts when I upgraded to ios 6.

  • Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.

    Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.

    The 8 pin Lightning connector can only output 720p and lacks all iPod Out functionality unlike the full iPod Out functionality and 1080p that the 30 pin connector has and I suspect that they are coding iOS 7 specifically for the new devices which have severely reduced abilities and perhaps skipping adding the code needed for 30 pin devices to use their functionality with HDMI, etc.

  • Apple TV works wired but doesn't work with Airport

    Hello everybody
    I have the following:
    o Mac Book Pro 13
    o Apple TV
    o D-Link WiFi Access Point (192.168.1.0/24)
    o Ethernet Network (also 192.168.1.0/24)
    o DHCP Server
    Initially I connected to Apple TV via Ethernet. As long as my Mac Book is wired to the network (firewall disabled, 192.168.1.189), Apple TV (also wired via Ethernet, 192.168.1.182) is able to connect to my iTunes library and iTunes finds Apple TV and everything works just fine. However, as soon as I connect my Mac Book via WiFi (192.168.1.200), the connection between these two devices is lost.
    As a network administrator this confuses me quite a lot. I thought, that the communication between these two softwares is a typical client server connection using daap protocol. For me it would be logical that iTunes connects to Apple TV on startup and establishes the network connection. Obviously I am wrong!
    What do I have to do, to make these two devices communicating while my Mac Book is wired as well as WiFi'ed to my private network? Any help is appreciated.
    So long, Stefan

    OK, I tcpdump'ed the network traffic on the wifi network adapter while opening iTunes. There are many mdns (bonjour) packets, even from the Apple TV box. That most probably means, that the two devices are being found using bonjour. The Apple TV box also sends the following request to my iTunes:
    +GET /ript/readytoconnect?machine-id=0x2D19D2D21EE788ED HTTP/1.1+
    +Host: 192.168.1.200:3689+
    +User-Agent: iTunes-AppleTV/4.1 (2)+
    +Accept-Encoding: gzip+
    +Connection: close+
    +HTTP/1.1 204 No Content+
    +Date: Tue, 30 Nov 2010 19:29:54 GMT+
    +DAAP-Server: iTunes/10.1 (Mac OS X)+
    +Content-Type: application/x-dmap-tagged+
    +Content-Length: 0+
    As long as my Mac Book Pro is ethernet wired, the request from the Apple TV box looks quite different:
    +POST /ript/readyforconnect HTTP/1.1+
    +Host: 192.168.1.182:3689+
    +User-Agent: iTunes/10.1 (Macintosh; Intel Mac OS X 10.6.5) AppleWebKit/533.19.4+
    +Accept-Encoding: gzip+
    +Content-Length: 453+
    +Connection: close+
    +<?xml version="1.0" encoding="UTF-8"?>+
    +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">+
    +<plist version="1.0">+
    <dict>
    <key>homeShareGroup</key>
    <string>00000000-1114-3a7c-f441-ca08dbf24097</string>
    <key>iTunesDatabaseID</key>
    <integer>7401468360494643499</integer>
    <key>iTunesMachineID</key>
    <integer>4142801218510725739</integer>
    <key>pairingGUID</key>
    <integer>0</integer>
    </dict>
    </plist>
    +HTTP/1.1 200 OK+
    +Date: Tue, 30 Nov 2010 16:11:28 GMT+
    +RIPT-Server: iTunesLib/4.1 (Mac OS X)+
    +Content-Type: application/octet-stream+
    +Content-Length: 214+
    +Content-Encoding: gzip+
    Any help with bonjour and Airplay is appreciated.
    Thanks...

  • I am having issues sending email from the apple mail application. reciving works but somtimes it takes an hour to send if at all. any thoughts?

    I administrate an office and we switched to macs very recently. Now the problem I am having is one of the workstations will send emails but very slowly and it sometimes it doesn't send at all through apple mail. It work fine through gmail client but this client needs to use apple mail and it just won't send it will recieve messages flawlessly. Any ideas? This is the only computer having problems with this!

    Hi Cdarnell,
    Here is an article with some good troubleshooting steps for issues sending mail through OS X Mail app:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Have a good one!
    - Ari

  • Is apple doing any thing to solve the issue foe WIFI grayout

    is apple doing any thing to solve the WIFI grayout ISSUE

    I am having this same problem (Wifi drops, freeze the screen) and it looks I am not the only one! Unfortunately, I went to the Apple Store in San Francisco and eventhough the Genius guy told me that the problem is in the manufacture process, he could not exchange the phone, since one year ago Apple exchange my old Iphone 5 cause I was having battery issues. The only way to solve with Apple now is paying more than $250 for a refurbished Iphone. Unfortunately it doesn't look like Apple anymore!!!

  • HT1657 trying to rent a movie on apple tv for the first time and can't do it without authorizing my computer on itunes store but can't find the menu on the iTunes site that lets me authorize my computer. any thoughts out there?

    trying to rent a movie on apple tv for the first time and have to authorize my computer but can't find the itunes menu that allows me to do this.  any thoughts out there? 

    If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
    If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
    (98261)

  • Apple ID works except for Apple Store

    I tried to buy something from the on-line store but my login was refused. I typed in everything correctly.
    Are the Apple ID for the store the same as that for Mobile Me and as for these discussion groups ?
    It did not send any information to my email address either.
    Why ? Help !
    Kevin

    I have recently had 'this' problem. In my case it seems to be a failure of the store website. In my case and maybe not in yours I had also never used the store before and that meant that I had to use the same ID and PW to actually make an acquisition from the store to have the ID work on the store. There were brief moments when the store did work. Apple told me other bits of the site were flaky as well.

  • I have MacBook 10.68.  Yesterday I downloaded the Apple version of Java which I must have to work remotely and now I get the message,"blocked plug in".  Any thoughts?  I cannot access website content any more

    I have MacBook 10.68.  Yesterday I downloaded the Apple version of Java for my system because my company requires it to work remotely but now I cannot access the content on various websites.  I get the message, "blocked plug in".  Any advice?  Thank you.

  • Does anyone know if Apple is working on a fix for the duplicate photo issue in iPhoto?

    I am debating on purchasing Duplicate Annihilator but the reviews sound mixed.
    Thanks

    What version of iPhoto and you using?  And where are you seeing these "triplicate" copies, in the iPhoto window or in the Finder?
    OT

  • My MG3500 stopped working. It still copies, but won't print from my computer any more.

    I have an MG3500 printer stopped working wirelessly. I set up the printer and it worked fine. Then, suddenly, it stopped working. I send something to print and it says there is a printer error. I tried to set up the connection again several times and each time it tell me that the printer cannot be detected on the network. Nothing has changed except that it no longer will print wirelessly.

    Hi steamboatvail, You can try reinstalling the latest printer drivers available from the Canon USA website to see if this will restore the connection between your printer and the network.  Before reinstalling the drivers, please ensure that the wireless setting of the printer is enabled by following these steps: 1.  Press and hold the Stop button until the Alarm lamp flashes 18 times. 2.  Release the Stop button. 3.  Press the Color Start button. After following the above steps, please click here to go to the Drivers and Software page for the PIXMA MG3520.  Once on the initial download page for the printer, please do the following:
    1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
    2. Next, please click on the red arrow next to the "RECOMMENDED DOWNLOADS" section and click the FULL DRIVER AND SOFTWARE PACKAGE file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
    Once you have downloaded the file, please double-click on it and follow the prompts to reinstall the printer drivers.  Should you still experience difficulty after reinstalling the drivers, please call or email us using one of the methods on the Contact Us page for further assistance.

  • HT201317 Got new Apple TV to replace 2nd gen but only new photos are in new one any way to load all 1000 pics onto the stream

    Read above

    Don't turn photo stream off on your other devices.  When you do it deletes your photo stream photos and when you turn it back on you will only receive photos added to your photo stream during the last 30 days, as older photos are no longer in iCloud.
    Instead, create a shared photo stream on your iPhone that includes the photo stream photos that are not on your other devices and invite yourself as a subscriber (see http://help.apple.com/icloud/#mmc0cd7e99).  You can then access these photos within the photo stream section of your photo albums.
    To save your photo stream photos on your device permanently, save them to your camera roll (tap Edit, tap the photos, tap Share, tap Save to Camera Roll).

  • Scanner HP G2410 doesn't work and ligth doesn't move

    I'm using the scanner G2410 in windows XP 32-bits, but suddenly it doesn't work. When I trying to scan, a short time later it shows me a message that says the scanner is not find it, that restart my pc, wait 60 seconds and connect it again. Also the ligth doesn't move. In the end of the message shows me the error number:
     4,[(2,5,80004000b),(3,5,0)]
    Even I try it in a pc with windows 7 64-bits but the same result.
    Is my scan totally damaged? I will appreciate you help me.

    Hello caifan125,
    Welcome to the HP Support Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Scanners.
    The support page for your product may be helpful in the meantime:
    I hope this helps!
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Since the iOS 7, iCloud doesn't send my photo stream to my windows.

    I checked every setting and it should work. I mean I have been using the icloud service for over a year and I love it. The weird thing is that the picture i'm taking are sent to my ipad and ipod but not my windows computer. any thoughts?

    I can't confirm this works, but some users have said they were able to solve this by opening the iCloud control panel, signing out of their account, then signing back in, being sure not to change the default iCloud photos location.

  • Apple Wireless Keyboard - Shift + 'r' key not working. It doesn't capitalise the letter. Can someone help please. Thank you.

    Hi all,
    I am having some problem with the Apple Wireless Keyboard. It has not problem connecting to both my iPad mini / iPhone 4S.
    The problem comes when I start to type with it. All the keys are functioning will, except when I am trying to capitalise the letter 'r'.
    I tried using Shift + r. It doesn't work, regardless whether I use the left or right Shift key.
    Any someone help please. Thank you.

    If your Macbook is less than a year old, it is under warranty. A repair of of a problem of this kind would be free. So, if you have a warranty, have the problem fixed by Apple.
    If your Macbook is more than one year old, please tell us what operating system you are running, and any other information that would help understand what is going on.
    If you do get the keyboard to work for a short time, long enough to post back, please unlock the "caps lock" button.

Maybe you are looking for

  • Cant set up voicemail on new phone

    I am trying to set up voicemail on my new iphone 5 and I am not given a prompt or any way to set it up.  I reset my settings and still no luck.

  • [Solved] Open Office NOT in repositories

    Hi, How do I install open office? Running pacman -S openoffice I get above response. Thanks Solved: found the following Wiki page: http://wiki.archlinux.org/index.php/OpenOffice Last edited by mibadt (2009-11-20 01:43:14)

  • Do it exist a FM to check possibility of convertion between different type?

    Hi all,    We have usually met the problem of DUMP when moving or writing a data type of a variable to an other variable which haven't the same data type as data type of moved variable.    For example:        - var01 type char10 with content "char_te

  • Strange error on start up - appleir No inputs registered, leaving

    Not a total newbie as I run Arch perfectly fine on my Macbook. I decided to install arch linux on my old early 2006 iMac as I already run it on my laptop, and I like to have the two systems with matching OSs. I get this strange message every time I b

  • Set default visibility

    Hi experts! This is a question about SAP Records Organizer (RM). I didn't find this particular forum on sap sdn, If this post is wrong here please tell me good location. Inside a record, nodes can set a visibility for a Role. Visibility for each node