My apple tv3 is connected via LAN to the Internet. Ipad 2 will not mirror.

Can I only mirror being on the same wifi network as my Apple TV or is there a work around so that I can still use my LAN for better Internet connectivity yet allow ipad connection thru AirPlay to stream and mirror to my tv?

no airplay is over lan not a point to point connection
if it was then changing between 1 appeltv and another or a shared itune lib on a computer would be painful slow

Similar Messages

  • TS3798 I have a new Ipad, it says I am connected to the internet but will not load . When attempting to go to a web sight, the green bar goes 1/2 inch then nothing

    I have a new ipad, it says I am connected to the internet but will not work. When I attempt to go to a web sight the green bar moves 1/2 inch and nothing.
    I have a used linksys router that I got from work. I tried connecting with a older ipad and every thing works correctly. any ideas?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Ipad will not mirror to apple tv

    My ipad will not give me the option to mirror to apple tv.

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    Restart your mobile device.
    The following article(s) may help you.
    Troubleshooting Homesharing
    Troubleshooting WiFi Networks

  • TS1398 I have been having network problems on my Ipad and I reset all network settings as advised in the article about problems connecting to networks.  Now my Ipad will not allow me to sign onto any network....it will not accept the passwords for any net

    My ipad has been a little glitchy for the last couple of weeks....not able to load pages because of DNS lookup failure and really slow loading...some of which has to do with the DSL service I have, but I followed the directions on one of the Apple wi-fi issues pages to reset network all connections..which I did, and now the Ipad cannot connect to WiFi because it will not accept (or cannot resolve..or??) password.  I am sure I am typing the password correctly and have tried it on several routers..and it cannot cannect to any router properly even with the correct password.  My laptop is connected just fine and it accepts the password and I have confirmed the password with the ISP and tried other routers.
      So the question is what should I do if I am entering the right password and the Ipad can't sign itself on to the Wifi network?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT1212 I cannot get the ipod disabled to go away even when i connect to itunes and the device screen will not let a passcode be entered

    Why will the IPOD let me put the passcode in. It is totally locked even after we connect to itunes

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • HT1386 I am connected with usb and still my ipad will not sync!

    I am not able to sync via wi fi or via usb.  Both options give me a message "ipad did not sync because the connection to the ipad was lost"!

    It is what an iOS device sync over the air with for calendar events with an iCloud account.
    The iCloud online calendar is the central location keeping calendar events synced between iCal on your Mac and your iOS devices.

  • The New iPad will not connect to my wi-fi

    I bought The New iPad yesterday. I have iPad One next to it. One will connect to my wi-fi network, the other won't. The New iPad won't.
    The problem is the password to the wi-fi network. TNiP seems to want a longer password. My password is 4 characters long (I do not want to hear a word about security and my password) and after I type it the submit button does not highlight unless I key in more characters.
    Is there anything I can do?
    Cheers,

    How do I change my router for the iPad?
    And why has Apple set up the password to be longer than the other versions?

  • How do I connect my Airport Extreme to the Internet, It will not connect

    I just got roadrunner internet and switched from dsl. I've been using the modem that came with dsl, but now I'm trying to use the Airport Extreme. My Imac does have the airport card, and I am able to get it to work with the airtunes to work with my stereo speakers, but I can't get a wireless internet connection. I've tried going through the set-up and I still can't get the internet connection to work. Can someone help me set it up?

    I'm a little cofused. Do you have an express or an extreme? Or both? In the case of either the solo exrpress or the extreme, they need something to access the internet with. It would need a source, most likely to be ethernet connected to the modem. Unless you have a modem that also acts as a wireless router or some such concoction. You would then have a wireless router to give your iMac a wireless signal.

  • Ive recently moved to Muscat in Oman and had wireless installed in my apartment.  I can connect to my laptop but my Ipad will not connect.  Any suggestions

    Trying to connect to my Ipad.  I've used it in coffee shops in Muscat and the hotel without any problem.  I've now had wireless installed in the apartment.  I can connect to my laptop but I cannot get the Ipad connected to the wireless - I've tried everything.  Any suggestions would be gratefully appreciated.  I've also tried Omantel who installed the wireless without any help.

    Usually I suggest checking that your WiFi router firmware is up to date, but your router was just installed.  Still, it might be worth checking with the manufacturer's web site.
    Here are Apple's support articles:
    iPad:  Troubleshooting WiFi networks and connections:  http://support.apple.com/kb/TS3237
    iPad:  Issues connecting to WiFi networks:  http://support.apple.com/kb/TS3304

  • How to Enable Wake On Lan over the Internet??

    Hi, I am using RV220W with the latest firmware, I want to make "Wake on LAN" work for my NAS, I found the following description on Internet:
    "If you wish to use Wake On Lan over the internet you will need to set up your destination firewall/router to allow "Subnet Directed Broadcasts". Most routers and firewalls disable this option by default.
    You will then need to allow traffic through on your firewall/router on a specific port. The choice of ports is up to you."
    So how can I enable "Subnet Directed Broadcasts" on RV220W??
    Thanks.
    Raymond

    Hi Jasbryan,
    If RV220W doesn't forward UDP to a broadcast address, could you ( i.e. Cisco) provide a tools for sending WOL Magic Packet to the LAN on Router Device Manager page?
    I see many routers also provide this tools from their manager page.
    Thanks.
    Raymond

  • IPad will not connect to air printer

    Thanks Pedro I tried what you said but still will not find the printer
    I think it must be some thing that talktalk did when they fitted the you view box as it worked fine before I had the engineer out but they said they could mot find envy fault the laptop works fine and the Ipad still connects to the Internet but will not connect to the printer If I install ican print I can prin a photo but I cannot just print a document without a lot of messing obout I would just like to find the air printe like before I thought it might be a conflict with the booster unit tha they fitted to my TV
    Could it be that the booster has the same address any help would be fine

    Hi there, check out suggested solutions for this problem at this support document (about half way down the list)
    Best.
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • Apple TV as Airport access point if connected via LAN

    Hi!
    I thought about the possibility to use the new Apple TV as Airport/WLAN access point in the case that it is connected via LAN. You don't need an Airport Express and you got Airport/WLAN/HDMI/Audio in all rooms (and around that room) you connect an Apple TV to. Nice and best for hotels!
    Vice versa: If you connect it via Airport to use the ethernet port as a hub/switch to connect devices. I think this should be possible and hope that it's only a firmware update...
    Next step is not only to playback videos/photos from other devices. Just use it as a main or second screen for all kind of devices (Computer Extensions forMac OS X/Windows other will follow...).
    You don't have to connect a notebook to a beamer anymore. There's only the AppleTV connected to a beamer. The video comes via Airport/WLAN /LAN.
    Make the USB Plug useful to connect printers or storage devices!!!
    That should be great and makes Apple TV the most useful device ton install it in every room in the house!!!
    I think, if the Apple TV can be connected to any kind of device, it shouldn't be Apple's hobby anymore.
    Regards,
    Michael

    send your suggestions to Apple via _*Apple TV Feedback*_.
    JGG

  • Competition problem between Windows 8.1 and Windows 7 on Photosmart C5180 connected via LAN

    Hello everyone, I am writing because I need some advice / help on a problem last night while configuring a small network.
    The network is made up as follows:
    2 notebook: Windows 8.1 and Windows 7
    3 different printers:
    2 USB connected to the respective notebook,
    1 HP Photosmart C5180 network printer connected via LAN via a router.
    The situation is the following:
    both notebooks recognize the various printers and are able to send and print documents but,
    when the print command starts from both notebook SIMULTANEOUSLY or at a distance of a few seconds, the only document printed is ALWAYS the one sent from the notebook with WINDOWS 8.1. The other one submitted by WINDOWS 7 IS LOST without being reported.
    So if I ask of you is someone experienced in the print queues, print drivers, competition in the print jobs that can help me in solving this problem.
    Thanks in advance

    Hello cesco,
    Welcome to the HP Forums.
    I see that you are having a communication issue when attempting to print on two separate printers at the same time.
    This will be a communication issue for sure.  The computer can only send to one printer at a time. You will have to print to one printer, wait for it to finnish the print job and then send it to the other printer. 
    There is no way that you can print from one computer to two separate printers at the same time.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HT1212 IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

    IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT4356 Can I use a 'pc' network printer connected via ethernet to the home wifi network ?

    Can I use a 'pc' network printer connected via ethernet to the home wifi network ?
    or must the printer I want to use also have a wifi connection ?
    I have a home network using ethernet connected devices to a router, also attached to th erouter is a WiFi unit. We are using the WiFi unit to connect to the network and hence to the big wide WWW.  We now want to print from our IPads pereferable to our netowk connected HP Officejet Pro 8500 A909a series. (not the wireless model).
    I was using the HP ePrint app to print from the Ipad, but I do not fully understand how this works. It seems that you must use the app to do the printing which is fine for basic email and photos, but I can not access the drawing package I have, and want to print from it. Please what is it that I do not understand.

    You must use an airprint printer directly connected to wifi through it's own wifi card.
    See here for info:
    http://support.apple.com/kb/ht4356

Maybe you are looking for

  • Oracle Method 4 - How to do in Java?

    Hi, I need to implement a Java application that performs some (quite big) select statements, but the select parameter list can be created only during runtime. Same goes for the WHERE clause. I stumbled across the Oracle Mehtod 4 in the book Pro*C/C++

  • Ad Hoc query - Hit list count

    Hello, Currently we are experiencing issues in few Ad hoc queries. Issue: When pressed "HIT LIST" button we get count as 21. But in the lower pen(output) we are getting count of 6. Evenif pressed "REFRESH" button the output remains same ie. only 6 en

  • Installing PO8 and Developer 6 under Windows95

    Is it possible to have Developer 6 and PO 8.0.4 installed on the same maching under Windows95? If so how? How to create multiple Oracle Homes under Windows 95? null

  • Open an App and see the App instead of just the name in the menu bar?

    This may seem like a dumb question, but here goes anyway... Two applications in particular....Microsoft Office apps (word,excel,etc) and Pro Tools LE.... How do I open these apps and see the opening page of the app, rather that just the name of the a

  • Wireless router console unable to be viewed

    I have a G router that I never have issues with until now.   I jested installed windows 7 on all my machines and after doing this I am unable to get to the Linksys Console.   I have tried IE 8 and Firefox but still no luck.   I first thought it was a