My appleTV restore does not work. When I connect it to i-Tunes and start the restore process, it always errors out during the software update/install/verification process.

Has anyone else experienced this?

Ok. Have you tried a different micro usb cable? If possible try another computer. Or take the unit to Apple. It could be a hardware issue and you can see about a replacement.

Similar Messages

HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

TS3367 Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

Was it just this one time? Could be that you, or your mom, were experiencing network problems. Try again at a later time.

Video does not work when I connect my Macbook to a TV using a thunderbolt to HDMI converter. Audio works fine.

I've been trying to connect my macbook to an Insignia TV. The macbook recognizes the TV is connected and changes the display ratio accordingly, but it does so in a jittery way before landing on 1080i after some time.
The audio works fine on the TV from the mac, but it's not picking up any video. When I go to System Preferences>Displays, I get two windows: one for the built-in display, one for the TV. I think this is why I'm not getting any video, but I don't know how to make it just so that the display is for the TV. The displays are mirrored, but I'm still not getting anything. Please help!

Go into System Preferences, then Displays. There should be an option to click on the tv mirroring. Click it and see if it connects to the TV.

I have a compact notebook and its not working when i turn it on it loads and then the screen turns b

its a model presario cq61notebook pc
system id 363f producct id wa980ua#aba

Was this iPhone jailbroken?

The remote does not work, when i turn the tv on I see the apple tv and the itune icon on the screen

the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.

Did you do a software update?
AppleTV is unable to start properly. You need to connect to a computer running iTunes as detailed here:
Apple TV (2nd and 3rd generation): Restoring your Apple TV

Siri does not work when used for calling a contact function

Siri does not work when used for calling a contact function

Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
If it continues try to restore it.

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Reply to all using ItemReply does not work when specifying messageid

Hello everyone,
I am trying to use the ItemReply token to perform a "Reply to All"
action on a mail item with a known message identifier and include the
original message text in the response. According to the documentation,
the call should be:
ItemReply(7;1;"message-id")
Still, when I execute this token, apparently only a normal reply action
is performed because only the original sender is listed as recipient.
(The message text is properly included)
However, when I manually select the message in the GroupWise client
first and then execute the same call without specifying the message id,
all recipients of the original mail are listed in "To:" as expected:
ItemReply(7;1)
Could it be that the "ReplyTo" parameter is ignored or does not work
when a message id is specified as parameter? (Setting "IncludeText" to 0
does not change anything)
Thanks in advance and best regards,
Peter Hofer

Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

My App Store does not work when trying to update applications

My Apo store does not work when I try to update applications that need to be updated

There are a number of other threads from people reporting a problem with a blank Updates tab in the App Store app - it looks like there is a problem at Apple's end which they need to fix.
Some posts are suggesting that you if you go into the Purchased tab in the App Store app you might be able to update the apps from there, though you will need to scroll through the list to find those with updates and individually update them.

Dbx does not work when debugging g++ exes.

Hi,
We are just getting started building our application on redhat el5 with sunstudio 12.
We are compiling and linking our app with gcc 4.1 as we need to be able to link against some 3rd party libraries build on rhel4 that we do not have source for.
We now can compile and link fine but dbx does not work when it is fed the executable.
We get the error
dbx: warning: Bad transition in runtime linker interface. CONSISTENT->CONSISTENT[
and dbx freezes.
Note : This is built with -m32 on a 64bit kernel. Also we have not yet rebuilt all the opensource libs used on gcc 4.1 as we have a large number of them.
Any ideas ?
The complete output of running dbx :
Output from dbx :
debug /ps_rels/Dev/linux_rhel5/exe/sx
Reading sx
Reading ld-linux.so.2
Reading libz.so.1
Reading libxerces-c.so.27
Reading libxalan-c.so.110
Reading libxalanMsg.so.110
Reading libsde.so
Reading libsg.so
Reading libpe.so
Reading libsqlite.so.0
Reading libsqlite3.so.0
Reading libgeos.so.2
Reading libpng12.so.0
Reading libX11.so.6
Reading libXm.so.4
Reading libXt.so.6
Reading libXi.so.6
Reading libXext.so.6
Reading libXrender.so.1
Reading libfreetype.so.6
Reading libexpat.so.0
Reading libfontconfig.so.1
Reading libcairo.so.2
Reading libglib-2.0.so.0
Reading libgmodule-2.0.so.0
Reading libgobject-2.0.so.0
Reading libgthread-2.0.so.0
Reading libpango-1.0.so.0
Reading libpangocairo-1.0.so.0
Reading libpangoft2-1.0.so.0
Reading libatk-1.0.so.0
Reading libgtk-x11-2.0.so.0
Reading libgdk-x11-2.0.so.0
Reading libgdk_pixbuf-2.0.so.0
Reading libtiff.so.3
Reading librt.so.1
Reading libwx_gtk2_xrc-2.8.so.0
Reading libwx_gtk2_qa-2.8.so.0
Reading libwx_gtk2_html-2.8.so.0
Reading libwx_gtk2_adv-2.8.so.0
Reading libwx_gtk2_core-2.8.so.0
Reading libwx_base_xml-2.8.so.0
Reading libwx_base_net-2.8.so.0
Reading libwx_base-2.8.so.0
Reading libboost_thread-gcc-mt-1_33_1.so.1.33.1
Reading libboost_filesystem-gcc-mt-1_33_1.so.1.33.1
Reading libncurses.so.5
Reading libnsl.so.1
Reading libdl.so.2
Reading libACE.so.5.5.1
Reading libpthread.so.0
Reading libpam.so.0
Reading libm.so.6
Reading libc.so.6
Reading libstdc++.so.6
Reading libgcc_s.so.1
Reading libicuuc.so.34
Reading libicui18n.so.34
Reading libstdc++.so.5
Reading libXau.so.6
Reading libXdmcp.so.6
Reading libXmu.so.6
Reading libXp.so.6
Reading libXft.so.2
Reading libjpeg.so.62
Reading libSM.so.6
Reading libICE.so.6
Reading libexpat.so.1
Reading libXfixes.so.3
Reading libXrandr.so.2
Reading libXinerama.so.1
Reading libXcursor.so.1
Reading libXxf86vm.so.1
Reading libaudit.so.0
Reading libicudata.so.34
Reading libnss_files.so.2
Reading libnss_dns.so.2
Reading libresolv.so.2
dbx: warning: Bad transition in runtime linker interface. CONSISTENT->CONSISTENT
Reading libnss_ldap.so.2
Reading libcom_err.so.2

Well, this message is just a warning and should not prevent dbx from working. What exactly happens to dbx? Does it hang? Does it crash? Or it doesn't allow to run the app?
A side note: this message says that runtime linker debugging interface reported "consistent" event w/o any "add" or "delete" events, which is at least redundant and may indicate a bug. It is possible though that the bug is in dbx as well as in ld-linux.so, but its impossible to tell without live test case.

The dropdown list in the address bar does not work when clicked

In the address bar the dropdown list icon does not work when clicked. I have tried resetting everything in safemode and it still doesn't work. When I click on the icon it just highlights the entire address line.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Also check the setting in:<br />
[http://kb.mozillazine.org/Menu_differences Firefox > Preferences] > Privacy > Location Bar: When using the location bar, suggest: History, Bookmarks, History and Bookmarks

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

Css3 animation does not work when triggerd by backing bean method

Hi,
I use Jdev 11.1.1.4 (but I guess the Jdev/ADF version does not matter in this case) and Firefox 15.0.1.
I tested some parts of article https://blogs.oracle.com/groundside/entry/css_animations_the_panel_flip from Duncan Mills.
The CSS3 animation for styleClass "rotateOut" works fine when I trigger it from mouse hover.
The problem is that the animation does not work when I set the styleclass in a backing bean.
In this case the UI component to rotate (in my case the calender component) changes immediatelly to the transition target without the transition-duration of 2 seconds and therefor there is no animation effect visible for the user.
Here the backing bean code:
    public void doRotate() {
       afCalender.setStyleClass("rotateOut");
       AdfFacesContext.getCurrentInstance().addPartialTarget(getAfCalender());
    }Here the skin:
.rotateOut {
    -moz-transition-property: -moz-transform;
    -moz-transition-delay: 2s;
    -moz-transform: rotateY(45deg);
    -moz-transition-timing-function: ease-in-out;
    -moz-transition-duration: 2s;
.rotateReturn {
    -moz-transition-property: -moz-transform;
    -moz-transform: rotateY(0deg);
    -moz-transition-timing-function: ease-in-out;
    -moz-transition-duration: 2s;
}In Duncan's article java script is used to change the style class.
Does the CSS3 animation only work when java script is used to change the style class or shoud java in a backing bean also work?
Any hints?
regards
Peter

I have tested several other settings but no success.
Any ideas?
regards
Peter

My appleTV restore does not work. When I connect it to i-Tunes and start the restore process, it always errors out during the software update/install/verification process.

Similar Messages

Maybe you are looking for